Since commit 5423ef9d4d ("rust: pin-init: internal: suppress
`non_snake_case` lint in `[pin_]init!`"), mere use of the non-snake-case
identifiers would not cause the warning to be generated. Thus remove these
allows.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Link: https://patch.msgid.link/20260612123401.2684025-1-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
It is not only used in the microcode loader anymore and the platform ID is
cached in the cpuinfo_x86 structure so move the getter to Intel CPU-specific
code.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/all/20260430020953.1405535-1-binbin.wu@linux.intel.com
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260422083330.84247-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike other sc8280xp platforms, on this platform, in dsdt, gpio 0x2c0
is not mapped to gpio107, it is gpio103, so fix it. I found this until
I did a trigger track, irq is regularly triggerd every several
millisecs. In the past, since here gpio107 was low forever, ec irq
would keep to be triggered and polling the event every several
millisecs.
About how to get the map, please check openbsd driver for it
https://github.com/openbsd/src/blob/master/sys/dev/acpi/qcgpio.c
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260419173251.1180026-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
pdc 215, 256, 257 are missing, but we can find tlmm pin 103, 84, 90
are mapped to them respectively, so add the map entries from pdc to
gic. These entries are reversed from .data section of qcgpio.sys
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260419173251.1180026-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
bpf_object__probe_loading() tries to load trivial SOCKET_FILTER and
TRACEPOINT programs to verify the BPF environment works. When a
BPF token is in use with restricted program type permissions, these
probe loads may fail because the token does not allow the specific
program types, even though BPF loading is perfectly functional.
Fix by skipping the probe when a token FD is present: BPF token
creation itself proves the kernel has a working BPF subsystem.
Real BPF issues will be caught during actual program and map loading.
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260610145059.113412-2-chenyuan_fl@163.com
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
monaco.dtsi:2326.4-2329.30: Warning (interrupt_map): /soc@0/pci@1c00000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component 'parent unit address', which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Fixes: 46a7c01e7e ("arm64: dts: qcom: qcs8300: enable pcie0")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407201518.24949-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sub-scheduler implementation has grown and will continue to expand. Move
the sub-scheduler functions from ext.c into a new kernel/sched/ext/sub.c.
sub.h holds the prototypes and the !CONFIG_EXT_SUB_SCHED no-op stubs.
scx_dispatch_sched() is shared: balance_one() in ext.c and the
scx_bpf_sub_dispatch() kfunc in sub.c both call it, and the latter re-enters
it as sub-scheduler dispatch nests. It moves into sub.h as a static
__always_inline so both callers keep it inlined and per-level stack stays
bounded across the recursion. The event macros it uses move to internal.h.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The following trivial helpers in ext.c are called from both ext.c and the
sub-scheduler code. Define them as static inline in internal.h.
- scx_bypass_dsq()
- scx_bypass_dsp_enabled()
- scx_ops_sanitize_err()
- scx_schedule_reenq_local()
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The sub-scheduler implementation is about to move into its own sub.c, from
where it calls a set of ext.c helpers and shares a few ext.c globals. Make
those reachable across the new file boundary ahead of the move.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A later change moves the sub-scheduler implementation out of ext.c into its
own file, from where it calls a number of file-local ext.c helpers. Give
those helpers the scx_ prefix that cross-file sched_ext symbols carry, ahead
of the move so the mechanical rename stays out of the code-motion patch. No
functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Allow users to force 10/100 Mb/s link speed and duplex via ethtool
when autonegotiation is disabled. Previously, the driver rejected
these requests with "Force mode currently not supported.".
Forcing at 1000 Mb/s and 2500 Mb/s is not supported.
Reviewed-by: Looi Hong Aun <hong.aun.looi@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Khai Wen Tan <khai.wen.tan@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The out: label only returns ret_val with no cleanup. The kernel coding
style guide states: "If there is no cleanup needed then just return
directly." (Documentation/process/coding-style.rst, section 7).
This improves readability ahead of a subsequent patch that introduces a
new goto label in this function.
No functional change.
Reviewed-by: Looi Hong Aun <hong.aun.looi@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Khai Wen Tan <khai.wen.tan@linux.intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move the advertised link modes and flow control configuration from
igc_ethtool_set_link_ksettings() into igc_handle_autoneg_enabled().
No functional change.
Reviewed-by: Looi Hong Aun <hong.aun.looi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Khai Wen Tan <khai.wen.tan@linux.intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
autoneg_failed in struct igc_mac_info is never set in the igc driver.
Remove the field and the dead code checking it in
igc_config_fc_after_link_up().
The field originates from the e1000/e1000e fiber/serdes forced-link
path, where MAC-level autoneg timeout sets it to signal the flow-control
code to force pause. igc supports only copper, so it never needs to set
this field.
Reviewed-by: Looi Hong Aun <hong.aun.looi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Khai Wen Tan <khai.wen.tan@linux.intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
igb always marks the RX hash as L3 regardless of RSS_TYPE in the
advanced descriptor, which may indicate L4 (TCP/UDP) hash. This can
trigger unnecessary SW hash recalculation and breaks toeplitz selftests.
Use RSS_TYPE from pkt_info to set the correct PKT_HASH_TYPE_*
Tested by toeplitz.py with the igb RSS key get/set patches applied as
they are required for toeplitz.py (see Link below).
# ethtool -N $DEV rx-flow-hash udp4 sdfn
# ethtool -N $DEV rx-flow-hash udp6 sdfn
# python toeplitz.py | grep -E "^# Totals"
Without patch:
# Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0
With patch:
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/intel-wired-lan/20260119084511.95287-5-takkozu@amazon.com/
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change igb_set_rxfh() to accept and save a userspace-provided
RSS key. When a key is provided, store it in the adapter and write the
E1000 registers accordingly.
This can be tested using `ethtool -X <dev> hkey <key>`.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Takashi Kozu <takkozu@amazon.com>
Tested-by: Kohei Enju <kohei@enjuk.jp>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement igb_get_rxfh_key_size() and extend
igb_get_rxfh() to return the RSS key to userspace.
This can be tested using `ethtool -x <dev>`.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Takashi Kozu <takkozu@amazon.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Store the RSS key inside struct igb_adapter and introduce the
igb_write_rss_key() helper function. This allows the driver to program
the E1000 registers using a persistent RSS key, instead of using a
stack-local buffer in igb_setup_mrqc().
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Takashi Kozu <takkozu@amazon.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change igc_ethtool_set_rxfh() to accept and save a userspace-provided
RSS key. When a key is provided, store it in the adapter and write the
RSSRK registers accordingly.
This can be tested using `ethtool -X <dev> hkey <key>`.
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement igc_ethtool_get_rxfh_key_size() and extend
igc_ethtool_get_rxfh() to return the RSS key to userspace.
This can be tested using `ethtool -x <dev>`.
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Store the RSS key inside struct igc_adapter and introduce the
igc_write_rss_key() helper function. This allows the driver to program
the RSSRK registers using a persistent RSS key, instead of using a
stack-local buffer in igc_setup_mrqc().
This is a preparation patch for adding RSS key get/set support in
subsequent changes, and no functional change is intended in this patch.
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The SoC Control Processor (SoCCP) is small RISC-V MCU that controls
USB Type-C, battery charging and various other functions on Qualcomm SoCs.
It provides a solution for control-plane processing, reducing per-subsystem
microcontroller reinvention. Add support for SoCCP PAS loader on Kaanapali
platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Hawi SoC
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-6-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Subsystems can be brought out of reset by entities such as bootloaders.
As the irq enablement could be later than subsystem bring up, the state
of subsystem should be checked by reading SMP2P bits.
A new qcom_pas_attach() function is introduced. if crash state is detected
for the subsystem, rproc_report_crash() is called. If the ready state is
detected meanwhile stop state is not detected, it will be marked as
"attached", otherwise it could be the early boot feature is not supported
by other entities or it has already been stopped. In above cases, the
state will be marked as RPROC_OFFLINE so that the PAS driver can load the
firmware and start the remoteproc.
Co-developed-by: Gokul Krishna Krishnakumar <gokul.krishnakumar@oss.qualcomm.com>
Signed-off-by: Gokul Krishna Krishnakumar <gokul.krishnakumar@oss.qualcomm.com>
Tested-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-5-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document SoCCP remote processor used on Qualcomm Hawi and Maili SoC which
is fully compatible with Kaanapali.
Co-developed-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-4-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the component used to boot SoCCP on Kaanapali SoC and add
compatible for Glymur SoCCP which could fallback to Kaanapali. Extend
the "qcom,smem-states", "qcom,smem-state-names" in the pas-common
and add maxItems constraints for SMEM properties in the documents
that reference to pas-common.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-3-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move interrupts and interrupt-names list out of pas-common since they
will be redefined differently for Kaanapali SoCCP.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-2-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Items in qcom,adsp.yaml has common clock and interrupt properties, move
these out of the allOf section to avoid list the compatible repeatly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-1-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add 25G, 40G, 50G, and 100G as available speeds to the netdev LED trigger.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260520200337.204431-2-mike.marciniszyn@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Like all LED drivers, pwm-multicolor supports turning on an LED on boot
by setting linux,default-trigger, e.g. to "default-on". pwm-multicolor
however scales the brightness of the color-component sub-LEDs with their
individual intensity value. Since these intensities are
zero-initialized, on boot a trigger is invisible until colors are set
from userspace.
Fix linux,default-trigger for pwm-multicolor by allowing for nonzero
default-intensities but default to 0 for backwards-compatibility.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20260605-multicolor-default-v2-2-ed07271df6b0@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
The architecture updates the cpu_mask in a domain's header to track which
online CPUs are associated with the domain. When this mask becomes empty
the architecture initiates offline of the domain that includes calling
on resctrl fs to offline the domain. If it is a monitoring domain in
which LLC occupancy is tracked resctrl fs forces the limbo handler to
clear all busy RMID state associated with the domain.
The limbo handler always reads the current event value associated with a
busy RMID irrespective of it being checked as part of regular "is it still
busy" check or whether it will be forced released anyway. When reading an
RMID on a system with SNC enabled the "logical RMID" is converted to the
"physical RMID" and this conversion requires the NUMA node ID of the
resctrl monitoring domain that is in turn determined by querying the NUMA
node ID of any CPU belonging to the monitoring domain.
When the monitoring domain is going offline its cpu_mask is empty causing
the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as
argument resulting in an out-of-bounds access.
Refactor the limbo handler to skip reading the RMID when the RMID will
just be forced to no longer be dirty in the domain anyway. Add a safety
check to the architecture's RMID reader to protect against this scenario.
Fixes: e13db55b5a ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Closes: https://sashiko.dev/#/patchset/cover.1780456704.git.reinette.chatre%40intel.com?part=9
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/16137433df42f85013b2f7a53626795cbd6637b9.1781029125.git.reinette.chatre@intel.com
__bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs.
security_bpf_prog_free() called from there fires bpf_prog_free in softirq;
if a sleepable LSM prog is attached to that hook, might_fault() BUGs:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038
preempt_count: 101, expected: 0
Call Trace:
<IRQ>
__bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255
bpf_trampoline_6442549705+0x53/0xd7
security_bpf_prog_free+0xde/0x130 security/security.c:5465
__bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365
rcu_do_batch kernel/rcu/tree.c:2617 [inline]
handle_softirqs+0x236/0x800 kernel/softirq.c:622
</IRQ>
The call_rcu/call_rcu_tasks_trace split reflects the freed program's
sleepability, not that of any attached observer.
security_bpf_prog_free() also frees prog->aux->security, which has to stay
after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks
rather than move the call. Non-sleepable observers still run there.
Fixes: 1b67772e4e ("bpf,lsm: Refactor bpf_prog_alloc/bpf_prog_free LSM hooks")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260701080757.1394144-1-rhkrqnwk98@gmail.com
test_maps fails in the sockmap test because sockmap_verdict_prog.c
drops the packet when the first 8 bytes are not directly accessible:
if (data + 8 > data_end)
return SK_DROP;
The blamed commit removed bpf_skb_pull_data() from the stream parser
program so that the parser no longer modifies the skb. That was needed,
but it also removed an implicit side effect: bpf_skb_pull_data()
linearized enough of the skb for later direct packet access.
In this test, the send side goes through the sockmap SK_MSG path. The
skb can have skb->len == 20 while its linear area is empty, so the
verdict program sees data == data_end and drops the packet even though
the payload length is sufficient.
Keep the parser read-only, and pull the first 8 bytes in the verdict
program before reading or writing them. Reload data/data_end after
bpf_skb_pull_data() as required.
Fixes: 22a0cc10da ("selftests/bpf: don't modify the skb in the strparser parser prog")
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260701071501.39628-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/e3a91acd-2b4d-4e93-a3bb-a0e9ee5ede0f@linux.dev/
In bpf_do_misc_fixups(), the conversion from a function address to a
BPF immediate value is handled using the BPF_CALL_IMM macro inside the
'patch_map_ops_generic' label block. However, immediately following it
in the 'patch_call_imm' label block, the immediate value is calculated
manually by subtracting __bpf_call_base from fn->func.
Inspired by KaFai Wan's review comments on fixing helper call offsets,
use the BPF_CALL_IMM macro in 'patch_call_imm' as well to clean this up.
This removes the redundant manual pointer arithmetic and ensures coding
style consistency across adjacent label blocks within the same function.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260701035107.8069-1-yangtiezhu@loongson.cn
Only few Qualcomm IMEM devices actually provide interface for setting
reboot modes, but top-level schema allows "reboot-mode" child for
everyone. Narrow this to specific compatibles.
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding even more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701105832.197036-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The mptcpify BPF prog upgrades eligible TCP sockets to MPTCP, but only
when the socket type is exactly SOCK_STREAM. Its update_socket_protocol()
hook runs on the raw type from userspace, before the socket core masks
it with SOCK_TYPE_MASK, so the type may still carry SOCK_CLOEXEC or
SOCK_NONBLOCK in its upper bits and the equality check fails.
As a result, a socket(AF_INET, SOCK_STREAM | SOCK_CLOEXEC, 0) -- what
common libraries do by default -- is silently left as plain TCP. This
was hit in practice with curl. Since mptcpify.c is referenced as example
code for enabling MPTCP transparently, the same mistake is likely to be
copied into real deployments where it fails the same way and is hard to
diagnose.
Mask the type before comparing, mirroring the socket core. Extend the
test to also create the server with SOCK_CLOEXEC set; the same masking
is applied to start_server_addr() so a flagged type still listens.
Fixes: ddba122428 ("selftests/bpf: Add mptcpify test")
Signed-off-by: Guillaume Maudoux <layus.on@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/bpf/20260630095723.564392-1-layus.on@gmail.com
We currently have a mixture of styles for our RTP tables with respect of
how we define the number of entries:
* xe_rtp_process_to_sr() expects to receive the number of entries as
arguments;
* xe_rtp_process() expects the array to have a sentinel at the end of
the array;
* in xe_rtp_test.c, even though xe_rtp_process_to_sr() does not
require a sentinel value, we need to rely on that technique to be
able to count xe_rtp_entry_sr entries because simply using
ARRAY_SIZE() is not possible.
The style used by xe_rtp_process_to_sr() makes it hard to share the
tables with other compilation units (e.g. kunit tests), since the number
of entries is calculated with ARRAY_SIZE(), which is done at compile
time.
Since we use the size of the tables to create some bitmasks, using a
sentinel style doesn't seem great either.
A way to reconcile things into a single style is to have a struct type
that would hold the entries array and the number of entries. Since we
have xe_rtp_entry and xe_rtp_entry_sr, we would have one type for each.
The advantage of the proposed approach is that now we have a nice way to
share the tables directly to kunit tests with information about their
size.
v6:
- Removed sentinels that are not needed
v5:
- Removed added code from conflict resolution issues
v4:
- Removed conflicts with main branch
v3:
- No changes
v2:
- Add compatibility with new xe_rtp_table_sr format for
"bad-mcr-reg-forced-to-regular" and
"bad-regular-reg-forced-to-mcr"
Fixes: 828a8eaf37 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-7-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5ff004fdc7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Adding tracing_multi link info tests that follow the kprobe_multi
and uprobe_multi tests logic.
Assisted-by: Codex:GPT-5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260629212208.895962-3-jolsa@kernel.org
Adding BPF_OBJ_GET_INFO_BY_FD support for tracing_multi links.
We expose following tracing_multi link data:
- attach_type of the program
- number of ids
- array of BTF ids
- array of its related kernel addresses
- array of cookies
The change follows the kprobe_multi and uprobe_multi link-info convention
of optional output arrays with an in/out count,
On top of standard tracing link data we also expose addresses, because they
are useful info for user (especially when the attachment was done via pattern).
This data is hidden when kallsyms does not allow exposing kernel pointer values.
Assisted-by: Codex:GPT-5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260629212208.895962-2-jolsa@kernel.org
Sen Wang <sen@ti.com> says:
Few miscellaneous bug fixes after the initial merge of TAS675x driver, of
which includes:
- Adding READ_ONCE for all concurrent read params
- Corrected kcontrol bits for temperature range
- Corrected conversion notes in the driver documentation
Link: https://patch.msgid.link/20260630183126.2588322-1-sen@ti.com
Two corrections against the TRM (SLOU589A):
- Corrected channel temperature range
- Corrected conversion formula for global temperature
Fixes: ba46edca35 ("Documentation: sound: Add TAS675x codec mixer controls documentation")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial merged patch mixed up the bits for temp reg with LDG report,
now fixing to the right bits according to TRM (SLOU589A).
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
active_playback_dais and active_capture_dais are written atomically via
set_bit()/clear_bit() and can be read concurrently from the
fault_check_work delayed work handler.
fault_check_work already uses READ_ONCE; extend the same guard to all other
reads in tas675x_hw_params() and tas675x_mute_stream().
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
