Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c0d5174b0)
Cc: stable@vger.kernel.org
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8ba869e852)
Instead of pinning the wptr bo attach the eviction fence to
the bo to make sure it remains valid all the time.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7264bc10c7)
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 48e1d1e6e8)
Cc: stable@vger.kernel.org
Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(),
which copies dirty DAT file folios/pages to its shadow page cache. The
BUG occurs when a retrieved dirty folio/page unexpectedly loses its
'dirty' status.
This issue arises because, since the commit referenced below, the 'dirty'
flag of a folio/page can be cleared asynchronously after the filesystem
detects metadata corruption and transitions to read-only mode.
Resolve the issue by returning an -EROFS error if the filesystem has
transitioned to read-only mode. Also change the behavior to issue a
kernel warning only once instead of triggering a kernel BUG when this
unexpected 'dirty' state is detected while the filesystem is not in
read-only mode.
Reported-by: syzbot+8baf9a79a3ffc6271cb6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8baf9a79a3ffc6271cb6
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title]
Fixes: 8a9d2191e9 ("nilfs2: operations for the_nilfs core object")
Signed-off-by: David Lee <david.lee@trailofbits.com>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
syzbot reported a hung task in nilfs_transaction_begin(). This occurs
because the cleaner ioctl falls into an infinite loop if
nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device
is remounted as read-only after an I/O error).
Currently in nilfs_clean_segments(), if err is non-zero, it logs the
error and sleeps but doesn't abort when it encounters a terminal error
like -EROFS. This causes the thread to loop forever.
Fix this by breaking out of the loop if nilfs_segctor_construct()
returns -EROFS. This matches the behaviour in
nilfs_segctor_write_out(), which also handles -EROFS.
Reported-by: syzbot+cae54346a70bbceeff2c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cae54346a70bbceeff2c
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Assisted-by: gemini:gemini-3.1-pro
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
This patch requests PSP to set the sec lvl for
vcn and jpeg.
Signed-off-by: Suresh Guttula <suresh.guttula@amd.com>
Reviewed-by: McRae Geoffrey<Geoffrey.McRae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4c8b8472f8)
Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error
in nilfs_direct_propagate() during testing.
Analysis revealed that after truncating a file, a node block immediately
below the B-tree root was not deleted. Instead, it remained in the B-tree
node cache in a dirty state. The log writer subsequently detected this
block and incorrectly invoked nilfs_direct_propagate() on it, which is
designed to handle only data blocks in direct mapping.
B-tree nodes in the cache are managed by virtual block numbers, and their
logical keys typically exceed the range expected by direct mapping.
Consequently, processing such a node as a direct mapping entry triggers
a slab-out-of-bounds access.
The root cause is that when a B-tree mapping collapses into a direct
mapping during truncation, an intermediate node block pointed to by the
root node is left behind as garbage instead of being explicitly deleted.
This resolves the issue by adding a nilfs_btree_discard() operation
to delete the remaining intermediate node block during the conversion.
A 'deform' flag is added to the bop_delete interface to explicitly signal
that the deletion is part of a mapping transformation. This allows the
B-tree mapping implementation to perform the necessary cleanup and
discarding of the residual node structure that would be otherwise be left
orphaned after the transition.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/r/08A3603A-ADB6-484C-9015-9AC1340E6FB8@gmail.com
Fixes: 36a580eb48 ("nilfs2: direct block mapping")
Cc: stable@vger.kernel.org
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Add the volatile qualifier and clobbers parameter to prevent bugs with
instruction reordering and optimization.
Also add TEST for the zero-length case to set ZF, as, if the count register
is zero, the REPE prefix does not run the CMPSB instruction, leaving the ZF
flag undetermined.
[ bp: Add a comment about the len==0 case. ]
Fixes: 62bd0337d0 ("Top header file for new x86 setup code")
Closes: https://sashiko.dev/#/patchset/20260701-pvh-kasan-inline-v6-0-ba99045dfa9f%40igalia.com
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20260721-pvh-kasan-inline-v7-2-38979a50cef0@igalia.com
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf2 ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_evict_svm_bo_worker() migrated an SVM BO's pages back to system
memory from a work item that took mmap_read_lock. When an mmap writer was
pending, that read lock blocked behind the writer while the thread
allocating a new migration VRAM BO waited on this BO's eviction fence - a
circular wait that hung the SVM workers.
Evict the SVM BO synchronously from the TTM eviction path
(amdgpu_ttm_bo_eviction_valuable) instead of deferring to a work item.
The BO is already reserved and the lock order is mmap_lock -> BO
reservation, so only trylock the owning process's mmap lock; on
contention return -EBUSY so TTM skips this BO. This removes the eviction
work item and the enable_signaling path, so no worker can block on
mmap_read_lock.
The SVM BO uses AMDGPU_GEM_CREATE_DISCARDABLE, so ttm_bo_evict takes the
pipeline_gutting path and skips allocating a system memory placement.
That would be wasted work, since svm_migrate_vram_to_ram allocates the
system pages and copies the data back itself.
Eviction now migrates ranges directly, so it must serialize with the
owning process: it trylocks migrate_mutex under svm_bo->list_lock before
unlinking the range, and svm_range_free() unlinks the range then waits on
migrate_mutex, so a concurrent eviction cannot free a range under it.
Drop the mm reference with mmput_async so exit_mmap() does not run under
the BO reservation.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a mode reset happens, driver needs to notify the process on that
GPU a reset event is happening. The existing code assumes the process is
using the GPU that is getting mode reset, which is not always true. For
example, on a 8G system, the process may be only using GPU 0~4 but a
mode 2 reset is resetting the all 8 GPUs connected by XGMI. Trying to
find a process on GPU 5~7 will fail, which is fine and should skip the
event signal.
Signed-off-by: Amber Lin <amber.lin@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By anchoring the search to the DML top-level Makefile directory,
FPU CFLAGS are now correctly applied to all relevant source files.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently when amdgpu copies or fills a buffer,
it uses the maximum byte count supported by the
copy engine (SDMA). This is problematic when the
maximum byte count is not aligned to 256 bytes
because it then can't use all memory channels
optimally and can cause the SDMA to operate in its
slower byte mode (as opposed to the faster dword mode).
For example, when copying a 10 MiB buffer on SDMA v2.4,
we get 5 packets copying 2097151 bytes and 1 packet copying
the remaining 5 bytes. All 6 packets are misaligned and operate
in byte mode.
For this example, the optimal solution would be to have
5 packets each copying 2096896 bytes and 1 last packet to
copy the remaining 1280 bytes, in which case all 6 packets
are aligned to 256 bytes and operate in dword mode.
Let's use the following scheme from now on:
When byte count is dword-aligned and fits a single packet,
just emit a single packet.
Otherwise, align the copy packet size down to 256 bytes
for optimal use of memory channels and to ensure the HW
can use the dword mode.
This assumes that the starting addresses of BOs are always
dword aligned, which should be the case for every copy
operation in the kernel, because the kernel always copies
pages.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
... and PCI device helpers.
The struct pci_device_id array of supported device was initialized
by list expressions. This isn't easily readable if you're not into PCI.
Use PCI_DEVICE* helper macros and named initializers which is more
explicit and thus easier to parse. Also skip explicit assignments of 0
(which the compiler then takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugger sets the CWSR grace period via AMDKFD_IOC_DBG_TRAP and may
request a value of 0. An earlier change clamped 0 to 1 unconditionally
because most firmware revisions locked up when given an infinite (0)
grace period.
Firmware has since been fixed on most ASICs, so gate the clamp on ASIC
type and MEC firmware version and allow 0 where the running firmware is
known to handle it. Navi3x and MI350 support 0 in every firmware
revision and need no version check. MI100 never received the firmware
fix and is kept clamped. Any unlisted or future ASIC defaults to the
safe (clamped) behaviour.
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After S3, reloading amdgpu on MacBookPro15,1 systems with a Radeon Pro
555X or 560X fails while loading the SMU firmware. The existing SMC
register check does not request a reset because the registers do not
reliably reflect the stale SMU state on these machines.
Frederick Morlock found that forcing a VI ASIC reset allows the driver to
initialize again. This patch limits his workaround to the exact PCI
device, Apple subsystem device and revision combinations used by these
two GPUs, leaving other VI hardware unchanged.
Suggested-by: Frederick Morlock <me@freddy.us>
Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All supported GPU generations now support DRM format modifiers.
Remove all code from amdgpu_dm that dealt with tiling flags.
Note that the legacy non-DC display code still relies on
tiling flags, so we can't remove them outside of DC
until we also remove the legacy display code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Link Mauve <linkmauve@linkmauve.fr>
Tested-by: Nikola Medić <nmedic89@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose displayable DRM format modifiers based on which
tiling modes are supported by the GFX block.
Technically, DCE (Display Controller Engine) could
support all possible permutations of all parameters
independently of what GFX supports, with the limitation
that it can only display LINEAR images and the
displayable micro tiling mode (MICROTILE == DISPLAY).
It doesn't make sense to expose all possible permutations
of macro tiling modes, so let's just expose what the GFX
block of the current chip supports.
The following modes will be advertised:
- 2D_TILED_THIN1 + DISPLAY + macrotile params [1]
- 1D_TILED_THIN1 + DISPLAY
- LINEAR
[1] The macro tiling parameters depend on how many
bits per pixel of the specific surface has and
how the chip is configured. There is only one set
of valid macrotile params for a given surface.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Link Mauve <linkmauve@linkmauve.fr>
Tested-by: Nikola Medić <nmedic89@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is done for consistency between different GPU generations.
Tiling flags are "implicit modifiers" which are used on AMD GPUs
to let the kernel know the tiling information without modifiers.
Convert the tiling flags to modifers on GFX8 and older, so that
the DC display driver can rely on them like on newer generations.
Note that this code path will only be taken when DC actually
exposes any modifiers on GFX6-8, which is handled in a subsequent
commit after this one. This code path mainly exists for legacy
compositors which don't support explicit DRM format modifiers
and rely on the tiling flags, and for compatibility with old
Mesa that didn't support modifiers on GFX6-8.
Add amdgpu_display_verify_sizes_gfx6() to validate modifiers
on GFX6-8 and only accept the modes that the display driver
really supports, as well as validate the FB sizes.
Additionally adjust check_tiling_flags_gfx6() to allow the
LINEAR_GENERAL mode and disallow the ROTATED mode which has
never been supported by Mesa or Linux and was mistakenly
allowed previously.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Link Mauve <linkmauve@linkmauve.fr>
Tested-by: Nikola Medić <nmedic89@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX6-8 are the oldest GPUs supported by the amdgpu
kernel driver, and the last ones that didn't support
DRM format modifiers until now. These are the Southern
Islands, Sea Islands and Volcanic Islands families
of GPUs.
On GFX6-8, the GFX block can only use pre-determined tiling
modes which are programmed by the kernel according to the
tiling mode table. GFX6 uses the GB_TILE_MODE0...31 registers,
and GFX7-8 also has GB_MACROTILE_MODE0...15 registers.
DCC is also supported on GFX8, albeit not displayable.
Note that the tiling table is uAPI and userspace relies on
specific modes being present at specific indices.
How the tiling works is primarily determined by the
so-called array mode.
Use the TILE field to specify the array mode.
Pixel data is organized into micro tiles.
Each micro tile may be 8x8 / 8x8x4 / 8x8x8 pixels,
depending on the array mode.
Add the MICROTILE field to specify microtile mode.
Microtiles may be further organized into macro tiles,
which have many configurable parameters. Macro tile mode
selection depends on how many bits per pixel an image has.
Add the PIPE_CONFIG, TILE_SPLIT, BANK_WIDTH, BANK_HEIGHT,
MACRO_TILE_ASPECT, NUM_BANKS fields to specify parameters
of macro tiled modes.
Furthermore, tiling is also influenced by memory
configuration. Old RFC patches received feedback
concerning that, so I looked into it specifically:
GB_ADDR_CONFIG.ROW_SIZE needs to be considered when
calculating TILE_SPLIT, but does not need to be included
in the modifiers, and also PIPE_INTERLEAVE matters,
but it's hardcoded to the same value on all GFX6-8 GPUs
and changing it would break userspace, so let's assume
it isn't going to change. Therefore we don't need to
include that in modifiers. Mesa also reads NUM_RANKS
but actually doesn't use its value on GFX6-8.
As a side note, tiling works similarly on GFX4-5
(that is Evergreen and Northern Islands). But that
will need some additional PIPE_CONFIG enum values
as well as some extra fields not relevant to GFX6-8.
Initially, let's only expose the tiling modes that are
most relevant to sharing buffers between different
processes:
Exposed array modes (TILE field):
- 1D_TILED_THIN1: micro tiled only
- 2D_TILED_THIN1: macro tiled
Exposed micro tile modes (MICROTILE field):
- DISPLAY: supported by DCE (the display engine)
- THIN: more efficient but not displayable
Exposed macro tile modes:
All possible parameters (25088 permutations).
More modes may be exposed in the future as needed.
Technically, the amount of possible combinations
of all possible tiling parameters is in the range
of hundreds of thousands, but in practice, there are
just a handful of possible modifiers for a surface.
For example on GFX8, a surface would have these
modifiers, from best to worst performance:
- 2D_TILED_THIN1 + THIN + DCC + macrotile params [1]
- 2D_TILED_THIN1 + THIN + macrotile params [1]
- 2D_TILED_THIN1 + DISPLAY + macrotile params [1]
- 1D_TILED_THIN1 + THIN
- 1D_TILED_THIN1 + DISPLAY
- LINEAR
[1] The macro tiling parameters depend on how many
bits per pixel of the specific surface has and
how the chip is configured. There is only one set
of valid macrotile params for a given surface.
DCC is only supported by GFX8 and newer, and only
with non-displayable macrotiling modes.
When sharing buffers between different GFX6-8 GPUs,
it is very unlikely that they support the exact same
macrotiling configuration, so they will likely need
to use micro tiled modes, which are still much better
than using linear buffers. (Note that currently Mesa
always uses LINEAR when copying between two GPUs.)
Suggested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for these cases.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Original amdgpu_cper_fini skips all CPER cleanup work for any SR-IOV VF directly.
When AMDGIM_FEATURE_RAS_CPER is enabled on VF side, CPER related buffers/workitems
are allocated during initialization, but the old code returns early without
releasing these resources, which leads to kernel memory leak.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User-space read/write syscalls interpret positive driver return values
as successful transfer sizes. Our current RAS wrappers return positive
error codes, so we must convert them to standard negative error codes.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add device lost status check in PSP fence wait loop to exit
polling early when GPU device lost
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow early FB reads to fall back to BAR0 when the VRAM aperture is not ready.
This lets SR-IOV VFs consume host-provided init data before requesting full GPU access.
For ASICs that support request_init_data,
defer full GPU access until after non-GPU early init to shorten the full-access window.
Legacy ASICs(before NV12) do not send request_init_data;
the host dumps init data only during full GPU access,
so keep the original early full-access request path for them.
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover both XGMI hive offset and A+A platform MC FB offset in one calculation.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
