drop debug_enable_ras_aca debug mask flag
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid sysfs node creation faults when performing NPS mode switching
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_connector_atomic_check() checks whether the old or new
connector state returned by the atomic helpers is NULL before using
those pointers.
However, new_con_state is already dereferenced while initializing crtc,
before the NULL check is reached. If
drm_atomic_get_new_connector_state() returns NULL, the function can
dereference the NULL pointer before the WARN_ON() check can handle it.
Declare crtc first and initialize it only after the NULL check has
succeeded.
Fixes: 1e5e8d672f ("drm/amd/display: Avoid a NULL pointer dereference")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260708072751.724400-1-lgs201920130244@gmail.com
(ML: adjust for movement to amdgpu_dm_connector.c)
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for dm_helpers_read_mccs_caps and
dm_helpers_mccs_vcp_set, including the DP/HDMI/legacy-PCON selection,
the i2c VCP request and set packets and the retry-failure paths.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for dm_helpers_submit_i2c,
dm_helper_dmub_aux_transfer_sync, the empty stub helpers, the MST
null-connector early returns, dm_helpers_dmub_outbox_interrupt_control,
dm_helpers_mst_enable_stream_features and
dm_helpers_enable_periodic_detection.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for the EDID parsing helpers edid_extract_panel_id,
apply_edid_quirks and dm_helpers_parse_edid_caps, together with the
ACPI/VBIOS EDID readers dm_helpers_probe_acpi_edid,
dm_helpers_read_acpi_edid and dm_helpers_read_vbios_hardcoded_edid.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dm_crtc_get_cursor_mode() only re-evaluates the required cursor mode
(native vs overlay) when a top plane changes its scale, pixel format,
enable state, or zpos/color pipeline. It does not re-evaluate when a
plane changes only its destination rectangle (crtc_x, crtc_y, crtc_w,
crtc_h) at a constant scale. A pure move/resize can create or remove a
hole under the cursor, which changes whether the native cursor is valid.
When a primary plane shrinks and no longer covers the cursor region, the
cursor mode stays NATIVE and the cursor is not rendered over the
uncovered area, so it becomes invisible there. This is caught by
igt@amdgpu/amd_cursor_overlay@non-full, where the test CRC was a constant
black value across all cursor positions instead of tracking the
reference.
[How]
In the per-plane loop of dm_crtc_get_cursor_mode(), set
consider_mode_change when any of crtc_x, crtc_y, crtc_w or crtc_h differs
between the old and new plane state, so a plane move/resize forces
re-evaluation of the cursor mode. The driver then correctly promotes the
cursor to OVERLAY mode when the primary stops covering the cursor region.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <PingLei.Lin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
correct a sequence issue by switching to dcn35's dccg sequence:
to make sure select dtbclk src first before programming hdmistream_clk_en.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The IGT test igt@amdgpu/amd_mall@static-screen always fails on DCN 4.0.1
because debugfs reports "mall enabled: no" even when MALL is
actually active. This is because the DCN 4.0.1 hubbub function table is
missing the .get_mall_en callback, so capabilities_show() always sees
mall_in_use as false.
[how]
Reuse hubbub32_get_mall_en() for DCN 4.0.1 since the DCHUBBUB_ARB_MALL_CNTL
register layout is identical to DCN 3.2:
- Register the DCHUBBUB_ARB_MALL_CNTL register offset in dcn401_resource.h
- Add MALL_PREFETCH_COMPLETE and MALL_IN_USE mask/shift definitions in
dcn401_hubbub.h
- Wire up .get_mall_en = hubbub32_get_mall_en in hubbub4_01_funcs
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <PingLei.Lin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
These registers are needed by our existing code.
[how]
Add the missing register defines to dcn42b_resource.c.
Remove DCN42B variant of HP_DP_STREAM_ENC_REG_LIST_RI as it is now the
same as the DCN42B one, when these registers are included.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to add null pointer access check
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for the following ISM functions:
- dm_ism_next_state(): state transitions for running, busy,
hysteresis-wait, optimized-idle, and aborted states
- dm_ism_get_sso_delay(): null stream, zero frames, 1080p60 3-frame,
and 4k60 1-frame calculations
- dm_ism_get_idle_allow_delay(): null stream, zero filter/entry/delay
frames, short-idle filtering, wrap-around, old history cutoff,
mixed durations, and entry count exceeding history size
- amdgpu_dm_ism_init(): initial state setup
- amdgpu_dm_ism_fini(): cleanup after init
- dm_ism_set_last_idle_ts(): timestamp update
- dm_ism_insert_record(): basic insert and wrap-around
- dm_ism_trigger_event(): valid and invalid transitions
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The matching entry was disabled but still copied during compaction, so a
removed pipe could survive and overwrite a valid entry, leaving num_wb_info
wrong.
[how]
Skip every entry matching dwb_pipe_inst and compact only survivors. Covered
by test_dc_stream_writeback_drc_and_remove.And added new test cases for coverage.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change memclk table to match dcfclk size to avoid fine grained mapping
in dml2.1
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML has been updated to use per-DPM derates when provided but per-DPM de-rates have not been finalized.
Need to validate to see what values should be stored in the bounding box.
[How]
Add debug options to set custom derates per DPM (starting at DPM0) and their values
Each entry in the custom derate expects the derates to be stored in the following format:
bits 0-7: dram_derate_percent_pixel
bits 8-15: fclk_derate_percent
bits 16-23: dcfclk_derate_percent
bits 24-31 are unused.
e.g. Using the value 0x414020 will set the following derates for DPM0
DPM0: 0x20, 0x40, 0x41 for dram, fclk, and dcfclk respectively
Note that global derate value will be used if the per-DPM derate is 0.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The CACP enablement on Linux added panel-type detection and CACP
capability logic that was not covered by KUnit tests.
[How]
Export amdgpu_dm_set_panel_type() and amdgpu_dm_update_cacp_caps() for
KUnit via STATIC_IFN_KUNIT/EXPORT_IF_KUNIT and add unit tests covering:
- amdgpu_dm_update_cacp_caps(): IP version gating (including the 3.1.6
exclusion), eDP/LVDS signal handling, non-eDP signals, and OLED vs LCD
panel types.
- amdgpu_dm_set_panel_type(): VSDB OLED/MINILED, DPCD oled/miniled bits,
the DID path (OLED and LCD), the vendor luminance heuristic, and the
LCD default.
Update the should_create_sysfs backlight tests to reflect the new
OLED/CACP behavior (OLED with/without CACP and LCD eDP panels).
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In amdgpu_dm_set_panel_type() the DID fallback branch tested and wrote
link->panel_type, while the rest of the function tracked the result in
the local variable panel_type. The final assignment unconditionally
overwrites link->panel_type from panel_type, so the value derived from
DID was always discarded, making the DID branch dead code.
[How]
Use the local panel_type variable in the DID fallback branch so that the
DID result participates in the source priority (VSDB -> DPCD -> DID ->
vendor luminance heuristic -> LCD default) and is preserved by the final
assignment.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The IGT test kms_plane_alpha_blend@coverage-vs-premult-vs-constant
failed on DCN with ODM 2:1 combine enabled. The test compares the CRC
of a coverage-blended plane against a premultiplied-blended plane and
expects them to be identical. With ODM combine the whole-frame CRC
mismatched (left segment matched, right segment differed).
Root cause: dc_stream_set_dither_option() iterated the pipe_ctx array
and broke out at the first pipe matching the stream (the OTG master /
OPP instance 0), then programmed bit-depth reduction (dither) on that
single OPP only. Under ODM combine there is more than one OPP head, so
the secondary ODM segment (OPP instance 1) was never reprogrammed. When
CRC capture requested dither off, only the left OPP got updated while
the right OPP kept its previous dither setting, producing a different
CRC for the right segment and thus a whole-frame CRC mismatch.
[how]
Use resource_get_otg_master_for_stream() and
resource_get_opp_heads_for_otg_master() to retrieve every OPP head of
the stream, then loop over all of them and call
transform_set_pixel_storage_depth() and opp_program_bit_depth_reduction()
on each. This keeps all OPP heads in sync under ODM combine, so dither is
applied (or cleared) identically across every segment and the CRCs match.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: James Lin <PingLei.Lin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
apply_dsc_policy_for_stream() decides whether Display Stream Compression
(DSC) should be enabled for a display stream based on display
capabilities, link bandwidth and user overrides.
Smatch reports that apply_dsc_policy_for_stream() dereferences
aconnector->dc_link before checking whether it is NULL.
Add an early NULL check for aconnector->dc_link before the first
dereference and remove the later redundant NULL check in the HDMI_FRL
path.
Fixes: 0e967e086e ("drm/amd/display: Extract connector and encoder code to amdgpu_dm_connector")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need special handling for passive HDMI dongles with I2C over AUX.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Port seamless boot fix from DCN42 to DCN42B and enable zstate
support for DCN42B.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DCN42B is missing some register masks, which are causing errors in dmesg.
[how]
Make DCN42B reuse the DCN42 register lists, and add the missing defines manually.
Fixes: 64142f9d51 ("drm/amd/display: Fix DCN42 null registers & register masks")
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN4 variant had IPS completely disabled via ips_support =
false and dc->config.disable_ips = DMUB_IPS_DISABLE_ALL.
Enabling IPS for D3 allows DMUB to manage idle power savings
when the display subsystem is inactive, reducing platform
power without affecting active display operation.
[How]
In DCN4 variant resource construct:
- Set dc->caps.ips_support = true
- Remove dc->config.disable_ips = DMUB_IPS_DISABLE_ALL override
This enables DMUB to dynamically manage IPS entry/exit during
D3 power state transitions. Also enable zstate by default.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gfx sysfs init fails, we may leak the ip dump
allocations.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gfx sysfs init fails, we may leak the ip dump
allocations.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gfx sysfs init fails, we may leak the ip dump
allocations.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gfx sysfs init fails, we may leak the ip dump
allocations.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for dumping IP register state.
v2: fixes suggested by Mukul
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
system_wq (per-CPU) and system_unbound_wq (unbound) are the older
workqueue name, replaced by system_{percpu|dfl}_wq.
The new workqueues have been introduced by:
128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
Usage of older workqueues will now trigger a pr_warn_once() because they are
marked as deprecated as per commit:
64d8eae3f8 ("workqueue: Add warnings and fallback if system_{unbound}_wq is used")
So change the used workqueue with the newer, keeping the same behavior.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable PSR and Panel Replay on a DCN4 variant for display power
savings.
[How]
Enable PSR and Replay in the DCN4 variant panel config defaults.
Fixes: 68737239e8 ("drm/amd/display: Enable PSR and Replay on DCN4 variant and fix AUX instance")
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable OLED panels to save more power on the Linux platform by
enabling CACP support on Linux.
[How]
Update abm_feature_support() to return ABM_CACP_SUPPORT for OLED
panels. Enable ABM property for all eDP panels including OLED to
support CACP via set_abm_level.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add DMUB service context to aid in platform abstraction when
flushing memory from the host.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
A change was added in amdgpu_dm_should_create_sysfs() to
check link->panel_type instead of caps->aux_support, and removed
the OLED exclusion from the ABM property attach path in
amdgpu_dm_setup_backlight_device().
This broke three KUnit tests:
- dm_test_should_create_sysfs_no_backlight_index and
dm_test_should_create_sysfs_pwm_backlight returned false
because kzalloc zeroes panel_type but PANEL_TYPE_LCD is 1.
- dm_test_setup_backlight_device_oled_success crashed with a
NULL pointer dereference in drm_object_attach_property since
abm_level_property was NULL.
[WHY]
Set panel_type to PANEL_TYPE_LCD in the two sysfs tests and
skip the ABM property attach path in the OLED setup test by
setting amdgpu_dm_abm_level to 0.
Cc: Chenyu Chen <chen-yu.chen@amd.com>
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC 11.7.0 and 11.7.1 should map to AMDGPU_FAMILY_GC_11_5_4 for DCN42.
Fixes: cf591e67c0 ("drm/amdgpu: add support for GC IP version 11.7.0")
Fixes: a928d8d81e ("drm/amdgpu: add support for GC IP version 11.7.1")
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update to the proper client list for mmhub 4.2.0.
v2: fix typo (Alex)
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vfree() safely handles NULL pointers, so the explicit NULL check
before calling vfree() is unnecessary.
This issue was reported by ifnullfree.cocci.
Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260703144851.80309-1-mdshahid03@gmail.com
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Add the Qualcomm Shikra SoC compatible string for the CPU-to-DDR
bandwidth monitor. Shikra has a BWMONv5 for CPU.
Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-shikra-dt-m1-v6-1-bee265d3499b@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document Eliza BWMONs which has a BWMONv4 for CPU-LLCC and a BWMONv5 for
DDR-LLCC paths, same as SM8550.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260708-bindings-llcc-bwmon-eliza-v1-1-3c7dbcbae87a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
MediaTek mt65xx family SoCs have no auto restart, however, they still
support the WRRD mode in the hardware. Because auto_restart is set to 0,
the WRRD mode will be never enabled, leading to read errors.
Fix this by removing auto_restart check from the WRRD enable path.
Fixes: b492183652 ("i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD")
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260709-6572-6595-i2c-v2-1-b2fb8510d1d3@protonmail.com
nvme_query_fdp_info() allocates the RUH status buffer for at most S8_MAX
- 1 descriptors, and then copies ruhs->ruhsd[] into head->plids[] using
the controller reported ruhs->nruhsd directly as the loop bound.
However, that count wasn't taken into account for the actual buffer's
size, so there was a chance for a controller reporting a larger nruhsd
to cause the copy to overflow the buffer. Clamp nr_plids to the same
bound used for the allocation.
Assisted-by: gkh_clanker_t1000
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hari Mishal <harimishal1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_identify_ns_descs() allocates a buffer and gives it to the
controller, which populates it and then iterates the buffer with
variable byte increments that vary by type and body size. But, there is
no bounds check inside the iteration itself except the loop bound
itself. Fix this by checking and stopping iteration if the next header
or its declared body would go past the buffer itself.
Assisted-by: gkh_clanker_t1000
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hari Mishal <harimishal1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The commit fixing the overlayfs mmap() and mprotect() access checks
failed to skip the execmem check in __file_map_prot_check() for the case
where the "mounter check" is being performed. This check should be
performed only against the credentials of the task that is calling
mmap()/mprotect(), since it doesn't pertain to the file itself, but
rather just gates the ability of the calling task to get an executable
memory mapping in general.
The purpose of the "mounter check" is to guard against using an
overlayfs mount to gain file access that would otherwise be denied to
the mounter. For execmem this is not relevant, as there is no further
file access granted based on it (notice that the file's context is not
used as the target in the check), so checking it also against the
mounter credentials would be incorrect.
Fix this by passing a boolean to [__]file_map_prot_check() and
selinux_mmap_file_common() that indicates if we are doing the "mounter
check" and skiping the execmem check in that case. Since this boolean
also indicates if we use current_cred() or the mounter cred as the
subject, also remove the "cred" argument from these functions and
determine it based on the boolean and the file struct.
Cc: stable@vger.kernel.org
Fixes: 82544d36b1 ("selinux: fix overlayfs mmap() and mprotect() access checks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Convert Microchip PIC32 Deadman Timer devicetree binding
from legacy text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701171917.263050-1-challauday369@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert Microchip PIC32 Watchdog Timer devicetree binding
from legacy text format to DT schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Link: https://patch.msgid.link/20260624055648.127399-1-challauday369@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
