Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add missing mutex_destroy() call to error path and remove to properly
clean up the mutex initialized during adapter allocation. Ensure proper
resource cleanup and follows kernel practices.
Found by code review.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Consolidate error path in cec_allocate_adapter() so next changes
will be less verbose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The AM62 wrapper requires the USB2 ref clock, but dwc3_ti_init() ignores
clk_prepare_enable() failures before marking the mode valid. Probe can
then populate the child DWC3 device even though the wrapper clock
transition failed.
Resume has the same issue after context loss or direct refclk re-enable.
Check and propagate the refclk enable errors so the wrapper does not
publish or resume a child provider without parent readiness.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260624055612.43319-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building the documentation currently with make htmldocs gives the
following errors:
WARNING: ./drivers/usb/dwc3/core.h:803 Excess struct member 'regs' description in 'dwc3_ep'
WARNING: ./drivers/usb/dwc3/core.h:803 Excess struct member 'regs' description in 'dwc3_ep'
This is because the member variable regs of the struct dwc3_ep was
removed in a previous patch. Remove regs from the kernel-doc
string, fixing the warning.
Fixes: abdd1eef04 ("usb: dwc3: Remove of dep->regs")
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260624114615.18593-1-jakovnovak30@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3_qcom_glue_ops is not used outside of the file it is declared in
, so make it static to avoid the following warning:
drivers/usb/dwc3/dwc3-qcom.c:605:22: warning: symbol 'dwc3_qcom_glue_ops' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623100000.718126-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3 driver currently defers probe if the USB power supply is not yet
registered. On some platforms, even though charging and power supply
functionality is available during normal operation, there may exist
minimal booting modes (such as recovery or diagnostic environments) where
the relevant USB power supply device is not registered. In such cases,
probe deferral prevents USB gadget operation entirely.
USB data functionality for basic operation does not inherently depend on
the power supply framework, which is only required for enforcing VBUS
current control. The configured VBUS current limit is typically enforced
through the charger or PMIC power path. When charging functionality is
unavailable, applying a current limit has no practical effect, reducing
the benefit of strict probe-time enforcement in these environments.
Instead of deferring probe, register a power supply notifier when the
USB power supply is not yet available. Cache the requested VBUS current
limit and apply it once the matching power supply becomes available, as
notified through the registered callback.
Signed-off-by: Elson Serrao <elson.serrao@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260608171953.1717369-1-elson.serrao@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPQ5210 includes a Qualcomm DWC3 USB controller supported by the existing
binding. Add its compatible string to the schema and include it in the
matching conditional constraints.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604090528.735236-1-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've had an unknown Turing issue for a while with page faults since
large pages and compression.
I've got a patch series that syncs all our L2 handling with ogkm and it
made this fault happen more.
After writing a bunch of debugging patches, I spotted an invalid LPT
entry where there should have been a valid one.
A 64K MAP succeeds on a range, but a subsequent SPT put drops SPT refs
across multiple ranges,
We shouldn't assume all ranges where SPTEs go away will have the same
sparse/invalid/valid state, just iterate over each instead and do the
right thing.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: d19512f5ab ("nouveau/vmm: start tracking if the LPT PTE is valid. (v6)")
Link: https://patch.msgid.link/20260615044737.3419585-1-airlied@gmail.com
[ Properly format commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
(cherry picked from commit d008141ed4)
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-fixes for v7.2-rc3:
- Fix uaf in amdxdna mmap failure path.
- A lot of deadlocks, access races and return value fixes in amdxdna.
- Fix analogix_dp bitshifts during link training.
- Use direct label in drm_exec.
- Fix absent indirect bo handling in v3d.
- Sync on first active crtc in fb_dirty, rather than first crtc.
- Rework try_harder in the buddy allocator.
- Make imagination function static to solve compiler warning.
- Fix imagination error checking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/71e5b48b-307f-47f5-8fd5-b60ea43e4196@linux.intel.com
SCL=0 enablement for always-on VRR timing. It also includes a fix
display LT PHY SSC programming and a small set of i915 fixes
addressing NULL pointer dereferences, memory leaks and bound checks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmpPsRMACgkQ+mJfZA7r
E8ppSAf/S65MM4nKWLP/c8SScFPaQzvynzmgcoj3z13pMb0IYZs9NlFysL1Ebi2T
hm5Nai/e/2Jzh15+GL9xnJqY2c6Cv4A+P5803wSvsDUU2G+y8/EmY3qlqbxfKwcf
KEnHyRuSYHL/dl0F+SLtTr7tgWNEYbAqnDNz6vY/hKPheJPxBHyVCZNharND907r
1AJksf2NkbzOLBCnAP5tV4s29qqjO7jxKUp7LVsKD0Kha05Fwr+qgZjUluN8JtbJ
vGmzhO7nO1/0D+3GSaRHXLcOd+V3ohJ2DkJnYbBe79NgYaKx3gW7oMNO2ZTLhFps
Z0vAVmzGFltIUalZoClJ5+0Kek74MQ==
=LSq3
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2026-07-09' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
Fix underrun regressions on Panther Lake by reverting the recent
SCL=0 enablement for always-on VRR timing. It also includes a fix
display LT PHY SSC programming and a small set of i915 fixes
addressing NULL pointer dereferences, memory leaks and bound checks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/ak-xZPqluaXVJGtP@intel.com
In print_capstone_detail(), maps__find() is used to locate the kernel
map. This function increments the reference count of the found map
object. However, the current implementation fails to call map__put()
after the map is no longer needed, leading to a reference count leak.
Fix this by adding a map__put(map) call to properly release the
reference after use.
Fixes: 92dfc59463 ("perf annotate: Add symbol name when using capstone")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit ae42a2a2a3 ("perf tests: Speed up lock contention analysis shell test")
in linux-next heavily optimized the test runtimes by switching the workload from
the default of 10 process groups down to 1 (`perf bench sched messaging -g 1`).
However, this change inadvertently dropped the original `-p` flag, causing the
benchmark to default to `socketpair()` instead of `pipe()`. While `socketpair()`
still generates some lock events on x86, it fails to trigger enough samples on
architectures like s390, causing the test suite to fail due to lack of captured
data.
Restore the omitted `-p` pipe flag. The test retains the massive speedups
achieved through the `-g 1` scaling, while producing a massive density of lock
events across all architectures to fully satisfy the BPF trace filtering logic.
Fixes: ae42a2a2a3 ("perf tests: Speed up lock contention analysis shell test")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The Kconfig entry for the MAX14001 is missing a 'select REGMAP',
causing build failures.
Fixes: 59795109fa ("iio: adc: max14001: New driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The Kconfig entry for the MAX34408 is missing a 'select REGMAP_I2C',
causing build failures.
Fixes: cf27775838 ("iio: adc: Add driver support for MAX34408/9")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----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=5a58
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"This contains a set of SMB server fixes mostly around session setup,
multichannel/session binding, and protocol-compatible error reporting:
- Fix SID-to-id mapping so only SIDs with a valid local Unix
representation are translated, while preserving other Windows
SIDs in NT ACL xattrs
- Fix SMB3 multichannel binding across multi-round authentication,
keep the derived channel key separate from the established session
key, and enforce the 32-channel session limit
- Match Windows-compatible close timestamp behavior by coalescing
automatic write time updates smaller than 15ms
- Return STATUS_DISK_FULL for SET_INFO allocation failures caused
by ENOSPC or EFBIG
- Fix several signed SESSION_SETUP error paths so clients see the
intended server status instead of replacing it with
STATUS_ACCESS_DENIED
- Fix reauthentication on bound channels and reject different-user
channel binding with STATUS_ACCESS_DENIED
- Use the referenced session dialect/signing algorithm when
validating and signing rejected cross-dialect binding requests"
* tag 'v7.2-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use the session dialect for rejected binding signatures
ksmbd: mark rejected cross-dialect bindings as signed
ksmbd: sign rejected SMB2.1 session binding responses
ksmbd: handle channel binding with a different user
ksmbd: find bound sessions during reauthentication
ksmbd: mark invalid session responses as signed
smb/server: map SET_INFO ENOSPC to disk full
ksmbd: coalesce sub-15ms write time updates on close
ksmbd: fix multichannel binding and enforce channel limit
ksmbd: validate SID namespace before mapping IDs
This fallback function CIFSSMBSetPathInfoFB() is called only from
CIFSSMBSetPathInfo() function. CIFSSMBSetPathInfo() is used in
smb_set_file_info() which contains all required fallback code, including
fallback via filehandle, since commit f122121796 ("cifs: Fix changing
times and read-only attr over SMB1 smb_set_file_info() function") and
commit 92210ccd87 ("cifs: Add fallback code path for cifs_mkdir_setinfo()").
So the CIFSSMBSetPathInfoFB() is just code duplication, which is not needed
anymore. Therefore remove it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Do not call SMBQueryInformation() command for path with SMB wildcard
characters on non-UNICODE connection because server expands wildcards.
Function cifs_is_path_accessible() needs to check if the real path exists
and must not expand wildcard characters.
Do not dynamically allocate memory for small FILE_ALL_INFO structure and
instead allocate it on the stack. This structure is allocated on stack by
all other functions.
When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo()
command. This command returns failure by non-NT Win9x SMB servers, so there
is no need try it. The purpose of cifs_is_path_accessible() function is
just to check if the path is accessible, so SMBQueryInformation() for old
servers is enough.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 97f0b13452 ("tracing: add trace event for memory-failure")
introduced memory_failure_event in ras subsystem. commit 31807483d3
("mm/memory-failure: remove the selection of RAS") changed
memory_failure_event to memory_failure subsystem. This breaks the
backward compatibility, some user programs rely on it.
Change memory_failure_event to ras subsystem to keep backward
compatibility.
Link: https://lore.kernel.org/20260605081213.154660-1-xieyuanbin1@huawei.com
Fixes: 31807483d3 ("mm/memory-failure: remove the selection of RAS")
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/linux-mm/CY8PR11MB7134346A3E4BB28ECA28D6E989132@CY8PR11MB7134.namprd11.prod.outlook.com
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At the moment, if a virtio balloon device has a page reporting vq but its
size is < PAGE_REPORTING_CAPACITY (32), the balloon driver fails probe.
But, there's no way for host to know this value, so it can easily create a
smaller vq and suddenly adding the reporting capability to the device
makes all of the driver fail. Not pretty.
Add a capacity field to page_reporting_dev_info so drivers can control the
maximum number of pages per report batch.
In virtio-balloon, set the capacity to the reporting virtqueue size,
letting page_reporting adapt to whatever the device provides.
Capacity need not be a power of two. Code previously called out division
by PAGE_REPORTING_CAPACITY as cheap since it was a power of 2, but no
performance difference was observed with non-power-of-2 values.
If capacity is 0 or exceeds PAGE_REPORTING_CAPACITY, it defaults to
PAGE_REPORTING_CAPACITY. The 0 check and the clamping is done in
page_reporting_register(), before the reporting work is scheduled, so we
never get division by 0.
Link: https://lore.kernel.org/444c24cf39f3f3620fc90ef4695bd6b0979f4c4b.1783232420.git.mst@redhat.com
Fixes: b0c504f154 ("virtio-balloon: add support for providing free page reports to host")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Gregory Price <gourry@gourry.net>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The per-cpu object checksum folds each CPU's CRC together with XOR and
seeds every CRC with 0. Both choices make update_checksum() miss content
changes:
- XOR is self-cancelling, so equal contents on two CPUs cancel out and
simultaneous identical changes leave the checksum unchanged.
- crc32(0, ...) over all-zero content is 0, so a freshly allocated,
zeroed per-cpu area checksums to 0, matching the initial value, and
the object is never seen to change.
See discussions at [0].
When update_checksum() wrongly reports an actively modified object as
unchanged, kmemleak stops greying it for an extra scan and can report a
live per-cpu object as a leak.
Fold the per-cpu CRC as a single rolling checksum across all CPUs and
initialise the object checksum to ~0 so the first computed value always
registers as a change, even for content that hashes to 0.
reset_checksum() is seeded the same way.
Link: https://lore.kernel.org/all/akfYImSNDh3OjIfR@gmail.com [0]
Link: https://lore.kernel.org/20260703-kmemleak_checksum-v1-1-5e0ab7d6966f@debian.org
Fixes: 6c99d4eb7c ("kmemleak: enable tracking for percpu pointers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f459 ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f459 ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260703165610.92894-1-sj@kernel.org
Link: https://lore.kernel.org/20260630041806.151124-1-sj@kernel.org [1]
Fixes: 97d482f459 ("mm/damon/sysfs: reuse damon_set_regions() for regions setting")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Usama has been active around THP, really enjoys working on THPs, and tries
to review all the patches that come in.
Let's invite him to the THP party as a reviewer to help with the ongoing
THP review load.
Link: https://lore.kernel.org/20260702140257.44780-1-lance.yang@linux.dev
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: SJ Park <sj@kernel.org>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Building the fat kunit tests on with -fsanitize=alignment reveals some
rather excessive stack usage:
fs/fat/fat_test.c: In function 'fat_clus_to_blknr_test':
fs/fat/fat_test.c:33:1: error: the frame size of 4736 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
33 | }
| ^
fs/fat/fat_test.c: In function 'fat_get_blknr_offset_test':
fs/fat/fat_test.c:52:1: error: the frame size of 4800 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
The problem is clearly related to the on-stack copy of a local
msdos_sb_info structure. Avoid this by making that copy 'static const'
and changing the called functions to accept a constant input.
Link: https://lore.kernel.org/20260515204456.2692208-1-arnd@kernel.org
Fixes: 410002f813 ("kunit: fat: test cluster and directory i_pos layout helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Adi Nata <adinata.softwareengineer@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function.
Link: https://lore.kernel.org/20260630035221.146458-1-sj@kernel.org
Fixes: 43b0536cb4 ("mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Yang yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The loop in clear_user_pages() iterates over all pages and calls
clear_user_page() for each of them. During the loop "vaddr" is modified.
However on m68k clear_user() is a macro which does not use "vaddr". The
compiler sees a variable which is modified but never used and emits a
warning for that:
include/linux/highmem.h: In function 'clear_user_pages':
include/linux/highmem.h:234:63: warning: parameter 'vaddr' set but not used [-Wunused-but-set-parameter=]
static inline void clear_user_pages(void *addr, unsigned long vaddr,
Other architectures use an inline function for clear_user_page() which
avoids the warning. This is not possible on m68k, as dlush_dcache_page()
is another macro which is not yet defined where clear_user_page() is
defined. Including cacheflush_mm.h will trigger recursive and lots of
other issues.
So hide the warning with a cast to (void) instead.
While we are here, do the same for copy_user_page().
Link: https://lore.kernel.org/20260525-m68k-clear_user_page-v2-1-0c8981c6eca1@weissschuh.net
Fixes: 62a9f5a85b ("mm: introduce clear_pages() and clear_user_pages()")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__split_folio_to_order() copies the hwpoison state onto each new sub-folio
while splitting a folio to a non-zero order. It does so via
if (handle_hwpoison && page_range_has_hwpoisoned(new_head, new_nr_pages))
folio_set_has_hwpoisoned(new_folio);
*before* clear_compound_head(new_head)/prep_compound_page(new_head, ...)
turns @new_head from a tail page into a proper folio head.
PG_has_hwpoisoned is a FOLIO_SECOND_PAGE flag, so
folio_set_has_hwpoisoned() resolves to folio_flags(folio, 1). With the
new compound_info-based page-flags layout, folio_flags() asserts the page
is not a tail:
VM_BUG_ON_PGFLAGS(page->compound_info & 1, page);
VM_BUG_ON_PGFLAGS(n > 0 && !test_bit(PG_head, &page->flags.f), page);
At the current call site @new_head still has the tail marker
(compound_info bit 0 set, PG_head clear), so on CONFIG_DEBUG_VM kernels
this hits:
kernel BUG at include/linux/page-flags.h:354
folio_flags+0x82
folio_set_has_hwpoisoned
__split_folio_to_order
__split_unmapped_folio
__folio_split
truncate_inode_partial_folio (shmem hole-punch / MADV_REMOVE)
Reproduced by syzkaller: hwpoison-inject a few subpages of a large shmem
folio, then MADV_REMOVE (fallocate punch hole) on the same range, which
splits the partial folio to a non-zero order.
memory_failure() tries to split the poisoned folio to order 0 first, but
that split is best-effort; when it fails the folio is left large with
PG_has_hwpoisoned set, the case fa5a061700 added this hwpoison copying
for.
Move the folio_set_has_hwpoisoned() call to after
clear_compound_head()/prep_compound_page(), where @new_folio is a real
order-new_order head folio (handle_hwpoison implies new_order != 0, so a
second page always exists). The flag still lands on the same struct page
(page[1] of the new folio); only the ordering relative to compound-head
setup changes, satisfying the FOLIO_SECOND_PAGE precondition.
Link: https://lore.kernel.org/20260701174235.3173401-1-riel@surriel.com
Fixes: fa5a061700 ("mm/huge_memory: preserve PG_has_hwpoisoned if a folio is split to >0 order")
Signed-off-by: Rik van Riel <riel@surriel.com>
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 65edfda6f3 ("mm/rmap: extend rmap and migration support
device-private entries") introduced the concept of device-private PMD
entries, but did not correctly update the rmap walk code to account for
them.
As a result, when page_vma_mapped_walk() encounters device-private PMD
entries, it takes no action other than to acquire the PMD lock and exit.
However this is highly problematic for two reasons - firstly, device
private entries possess a PFN so check_pmd() needs to be called to ensure
an overlapping PFN range.
Secondly, and more importantly, if PVMW_MIGRATION is set the caller
assumes the returned entry is a migration entry, resulting in memory
corruption when the caller tries to interpret the device private entry as
such.
In addition, commit 1462872900 ("mm/huge_memory: implement
device-private THP splitting") allowed device private PMDs to be split
like THP mappings, but again did not update this code path.
As a result, we might race a PMD split prior to acquiring the PMD lock.
This patch addresses all of these issues by invoking check_pmd(), ensuring
PMVW_MIGRATION is not set and checks whether a split raced us we do for
PMD THP and migration entries.
Instead of checking for a subset of the cases after taking the pmd_lock(),
put device-private along with pmd_trans_huge() and
pmd_is_migration_entry(). Also remove thp_migration_supported() as it is
already guarded by pmd_is_migration_entry().
[akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David]
Link: https://lore.kernel.org/20260630021540.17297-1-richard.weiyang@gmail.com
Fixes: 65edfda6f3 ("mm/rmap: extend rmap and migration support device-private entries")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: David Hildenbrand <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: <stable@vger.kernel.org>q
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
My legal and preferred first names are SeongJae and SJ, respectively. I
was using the legal name for commits and tags, while using the preferred
name for conversations. It sometimes confuses people including myself.
Consistently use the preferred name.
Together remove copyright notes on files. Those are only confusing for
people who are not familiar with the law. Meanwhile, we can infer the
information in a better way from git logs and public information.
Link: https://lore.kernel.org/20260630013820.143366-1-sj@kernel.org
Signed-off-by: SJ Park <sj@kernel.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vova Tokarev says:
userfaultfd allows registration on shadow stack VMAs. With userfaultfd
access, you can register on the shadow stack, discard a page ... and
inject a page with chosen return addresses via UFFDIO_COPY.
Update vma_can_userfault() to reject VM_SHADOW_STACK.
While on it, also reject VM_SPECIAL so that if a driver would implement
vm_uffd_ops, it wouldn't be possible to register special VMAs with
userfaultfd.
Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude
hugetlb VMAs from the check for VM_SPECIAL.
Link: https://lore.kernel.org/20260618095017.2553004-1-rppt@kernel.org
Fixes: 54007f8182 ("mm: Introduce VM_SHADOW_STACK for shadow stack memory")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: vova tokarev <vladimirelitokarev@gmail.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
consume_remote_task() drops this_rq before unlinking a remote task from
its DSQ and locking src_rq. When called from ops.dispatch(),
scx_locked_rq() keeps pointing to this_rq across the lock dance. The
subsequent switch_rq_lock(src_rq, this_rq) cannot update the tracking
because its guard does not match, leaving the tracking stale while
src_rq is held.
Keep this_rq locked until the task has been unlinked and the DSQ lock
released, then use switch_rq_lock() to switch directly to src_rq. Use
the same helper to restore this_rq after losing the dequeue race. The
successful path already switches back through
move_remote_task_to_local_dsq(), so scx_locked_rq() now follows the
actually held rq throughout the consume path.
Suggested-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/all/455e701bca66bdecde530d225f4dba0a@kernel.org
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a block request is too large for a single ring entry and the
backend does not support indirect descriptors, blkfront splits it across
two ring requests. This only happens when the frontend runs on a
64K-page kernel (e.g. arm64): there, even a single-page request may not
fit in one ring slot and must be split. blkif_ring_get_request() is
called twice and both shadow slots (shadow[id] and shadow[extra_id])
point at the *same* struct request, linked through associated_id.
blkif_completion() collapses the pair on the normal completion path,
recycling the second slot and completing the request once. The
suspend/resume walk in blkfront_resume() does not: it visits every
shadow slot with ->request set and calls blk_mq_end_request() or
re-queues ->request. For an in-flight split request it therefore
processes the shared struct request twice on resume/migration -- a
double completion.
Skip the secondary slot of a split request in the resume walk so each
logical request is processed exactly once. The secondary slot is the
linked one (associated_id != NO_ASSOCIATED_ID) that carries no
scatter-gather list (num_sg == 0); the first slot always keeps the sg
list. The bug is only reachable on suspend/resume or live migration of
such a guest, so it has no local reproducer.
Fixes: 6cc5683390 ("xen/blkfront: Handle non-indirect grant with 64KB pages")
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://patch.msgid.link/20260709100853.7489-1-doruk@0sec.ai
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scx_bpf_kick_cid() returned an error code, but the value conveys nothing
actionable and no caller consumes it. The kick is asynchronous, so a
successful return only means it was queued. An invalid @cid is already
reported through scx_error() by scx_cid_to_cpu(), and a missing scheduler
leaves nothing to kick.
Make scx_bpf_kick_cid() return void to match scx_bpf_kick_cpu(). The
cid-form kfuncs are not in practical use yet, so the ABI change is safe.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Direct writes to p->scx.slice and p->scx.dsq_vtime bypass
scx_bpf_task_set_slice/dsq_vtime() and the authority checks they carry.
Those checks exist for sub-schedulers, which attach only through the
cid-form struct_ops, so the direct writes only need to be closed there.
Give sched_ext_ops_cid its own verifier ops that reject the two fields.
cid-form is a new interface with no legacy users, so there is no
compatibility to keep. The cpu-form keeps direct writes, and the deprecation
warning they carried is dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_qmap.c and the shared scx_qmap.h mixed __u64/__u32/__s32 with the bare
typedefs that scx/common.h provides. Convert the remaining __-prefixed
integer types to the bare forms for consistency. The struct fields become
bare u64 (uint64_t), so the stats printfs that fed them to %llu now cast to
unsigned long long. No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_rq.extra_enq_flags carries scx-specific enqueue flags across the
activate_task() boundary during a cross-rq task move in
move_remote_task_to_local_dsq(). Rename it to remote_activate_enq_flags to
name that role, and fix the stale comment that referenced the old
move_task_to_local_dsq() name.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The cid-form ops overlay their cpu-form siblings at the same struct slot.
Ops whose signature matches the sibling are invoked through the cpu-form
call sites unchanged, but set_cmask() takes an arena cmask address rather
than a cpumask, so scx_call_op_set_cpumask() calls ops_cid.set_cmask()
directly and hand-rolled the kf_tasks[] and locked_rq bracket that
SCX_CALL_OP_TASK() provides. The hand-rolled bracket reset locked_rq to
NULL on exit instead of restoring the saved value, so a nested call would
clobber the outer op's locked-rq tracking.
Parameterize the dispatch macros by the ops-table member and add
SCX_CALL_CID_OP_TASK(), which routes through sch->ops_cid. Convert
scx_call_op_set_cpumask() to it and drop the hand-rolled bracket. The only
behavioral change is that locked_rq is now saved and restored like every
other op call site.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The cmask ops can operate on BPF-arena cmasks which BPF programs may read
and write concurrently. The _RACY op variants existed to make such lockless
reads explicit but this turned out to be too restrictive. Mark the word
accesses in all the two-cmask ops with READ_ONCE/WRITE_ONCE instead and drop
the _RACY variants.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Starting with rustc 1.88, the `clippy::unwrap_or_default` lint triggers
on `rust/kernel/soc.rs` if `CONFIG_CC_OPTIMIZE_FOR_SIZE=y`:
warning: use of `unwrap_or` to construct default value
--> ../rust/kernel/soc.rs:66:10
|
66 | .unwrap_or(core::ptr::null())
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `unwrap_or_default()`
This is a clippy bug [1]: the lint decides whether an expression is
equivalent to `Default::default()` by inspecting the optimized MIR of
`<*const T as Default>::default` exported by `core`, so its outcome
depends on the optimization level `core` was built with. Moreover, its
suggestion ignores our MSRV of 1.85 (`Default` for `*const T` is only
stable since Rust 1.88), so we could not apply it anyway.
Disable the lint globally rather than working around this single
occurrence; it can be re-enabled conditionally using `rustc-min-version`
once clippy is fixed.
Link: https://github.com/rust-lang/rust-clippy/issues/17379 [1]
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://patch.msgid.link/20260708-soc_unwrap_or-v2-1-007ed724cc7b@nvidia.com
[ Moved to non-versioned group. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull to receive:
db4e9defd2 ("sched_ext: Record an error on errno-only sub-enable failure")
49b3378a75 ("sched_ext: Fix premature ops->priv publication in scx_alloc_and_add_sched()")
e6979d05c6 ("tools/sched_ext: scx - Fix cmask_subset(), cmask_equal() and cmask_weight()")
for further sub-sched changes and to resolve the conflicts with the
sub-sched updates on for-7.3.
db4e9defd2 adds scx_error() to the sub-enable err_disable sink which
for-7.3 moved from ext.c into sub.c. Resolved by applying the fix to
scx_sub_enable_workfn() in sub.c.
49b3378a75 drops RCU_INIT_POINTER() from an scx_alloc_and_add_sched()
unwind label whose body changed with for-7.3's stall_cpus addition.
Resolved by dropping the line from the updated unwind.
Signed-off-by: Tejun Heo <tj@kernel.org>
The R-Car Gen4 PCIe controller integration configures MSI registers in the
controller driver pp->ops->init() callback because they have to be
configured while PERST# is asserted, and PERST# is asserted across the
controller driver pp->ops->init() callback.
A future change to the R-Car Gen4 pp->ops->init() callback will need to
know whether iMSI-RX is in use. Assign pp->use_imsi_rx before calling
pp->ops->init() so pp->use_imsi_rx is available.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260707203743.88299-2-marek.vasut+renesas@mailbox.org
GuC firmware 70.71.0 (UAPI 1.37.2) is the first official GuC firmware
for Novalake S. Recommend this version for NVL-S platform.
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260707192547.50535-12-julia.filipchuk@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
cmask_equal(), cmask_weight() and cmask_subset() bounded their word walks
with CMASK_NR_WORDS(nr_cids), which pads by one word and can't tell the last
word in use without @base. The walks could thus cover a slack word past the
active range, which cmask_reframe() leaves non-zero: a stale bit there gave
cmask_equal() a spurious mismatch, cmask_weight() an inflated count, and
cmask_subset() a spurious violation. cmask_subset() could also read
@b->bits[] one word past its allocation (within the arena's fault-recovered
range, so harmless), and deviated from the kernel scx_cmask_subset() by
failing any @a range that doesn't nest inside @b's even when the overhanging
bits are all clear.
Bound the cmask_equal() and cmask_weight() walks by the words the range
actually spans, with early returns for empty ranges. Rewrite cmask_subset()
to match the kernel semantics: scan @a's overhangs for set bits with
cmask_next_set() and walk the words of the range intersection.
cmask_subset() moves below cmask_next_set(), which it now uses. Padding bits
don't need masking as every cmask helper keeps them clear.
Fixes: a58e6b79b4 ("sched_ext: Add cmask, a base-windowed bitmap over cid space")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_alloc_and_add_sched() publishes @sch through ops->priv before allocating
the cgroup path. If that allocation fails, the unwind path clears ops->priv
and frees @sch immediately. scx_prog_sched() callers can dereference
ops->priv from RCU context the moment it is set, so freeing without a grace
period can use-after-free a concurrent kfunc caller.
Move the publication below the cgroup path allocation so that every failure
path after publication frees @sch through kobject_put(), whose release path
defers the freeing by a grace period.
Fixes: 105dcd005b ("sched_ext: Introduce scx_prog_sched()")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_sub_enable_workfn() has several failure paths that only return an errno
(e.g. -ENOMEM from an allocation) and jump to err_disable without calling
scx_error(). scx_flush_disable_work() runs the disable, and thus ops.exit(),
only when an error has been recorded, so an errno-only failure leaves the
half-initialized sub-scheduler linked.
Record an error at the err_disable sink so every errno-only failure runs the
disable path.
Fixes: ebeca1f930 ("sched_ext: Introduce cgroup sub-sched support")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
