The pca9532_gpio_set_value() function incorrectly mapped the requested
value to PCA9532_ON and PCA9532_OFF, inverting the GPIO output polarity.
A requested logical high (val=1) incorrectly enabled the LED output
driver, which on this open-drain device pulls the pin low, while a
requested logical low (val=0) released the pin.
Correct the mapping so that val=1 yields PCA9532_OFF (pin released /
high-impedance) and val=0 yields PCA9532_ON (pin driven low).
pca9532_gpio_direction_input() is also updated to pass val=1 to
pca9532_gpio_set_value() to align with the corrected polarity mapping,
ensuring the pin remains not driven when configured as an input.
Fixes: 3c1ab50d0a ("drivers/leds/leds-pca9532.c: add gpio capability")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703014201.69829-1-chou.cosmo@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
mlx5_tun_entropy_refcount_inc() counts both VXLAN and L2-to-L3
tunnel reformat entries as entropy-enabling users. The matching
decrement path only handled VXLAN, leaving L2-to-L3 tunnel entries
counted after release.
Handle MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL in
mlx5_tun_entropy_refcount_dec() as well so the enabling entry
refcount remains balanced.
Fixes: f828ca6a2f ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260703141423.1723-1-lirongqing@baidu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove unnecessary address and size cells from both the disp_dsi0
and the xhci2's ethernet usb device subnode to fix a dtbs_check
warning for avoid_unnecessary_addr_size.
Fixes: 9fda4a8a47 ("arm64: dts: mediatek: add device tree for Tungsten 510 board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
<linux/mdio.h> itself doesn't use any of the device id structures. The
files #including <linux/mdio.h> use a variety of them:
$ git grep -l '<linux/mdio.h>' | xargs grep --color -E '\<(acpi_device_id|amba_id|ap_device_id|apr_device_id|auxiliary_device_id|bcma_device_id|ccw_device_id|cdx_device_id|coreboot_device_id|css_device_id|dfl_device_id|dmi_(device|system)_id|eisa_device_id|fsl_mc_device_id|hda_device_id|hid_device_id|hv_vmbus_device_id|i2c_device_id|i3c_device_id|ieee1394_device_id|input_device_id|ipack_device_id|isapnp_device_id|ishtp_device_id|mcb_device_id|mdio_device_id|mei_cl_device_id|mhi_device_id|mips_cdmm_device_id|of_device_id|parisc_device_id|pci_device_id|pci_epf_device_id|pcmcia_device_id|platform_device_id|pnp_(card_)?device_id|rio_device_id|rpmsg_device_id|sdio_device_id|sdw_device_id|serio_device_id|slim_device_id|spi_device_id|spmi_device_id|ssam_device_id|ssb_device_id|tb_service_id|tee_client_device_id|typec_device_id|ulpi_device_id|usb_device_id|vchiq_device_id|virtio_device_id|wmi_device_id|x86_(cpu|device)_id|zorro_device_id|cpu_feature)\>'
...
but none of them relies on <linux/mdio.h>'s #include.
<linux/mod_devicetable.h> is a bad header mixing many different device
id structures and thus is an unfortunate dependency because if e.g.
struct wmi_device_id is modified all users of <linux/mdio.h> need to be
recompiled despite none of them using struct wmi_device_id.
So drop the unused header.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ca270a534d0f230a939a3fb4a661808b35d6436d.1783329817.git.u.kleine-koenig@baylibre.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This platform booted with Ubuntu 24.04 with Pipewire audio server. So,
it has pop noise with headphone. But it's normal with Pulseaudio server.
This patch was the workaround. Connect the headphones to DAC 0x2.
The popping sound will disappear.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/34b990cb56914148ba02fa8e9d176479@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add Static and Dynamic Interrupt Moderation (DIM) support for
Rx and Tx.
Update queue creation procedure with new data struct with the related
settings.
Add functions to collect stat for DIM, and workers to update DIM data
and settings.
Update ethtool handler to get/set the moderation settings from a user.
To avoid detach/re-attach ops, ring DIM doorbell to change settings
at run time.
By default, adaptive-rx/tx (DIM) are enabled if supported by HW.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260702220123.815018-1-haiyangz@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty.
Fixes: 89e5785fc8 ("[PATCH] Atmel MACB ethernet driver")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260702-macb-drop-tx-v4-1-1c833eebdbc8@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dexuan Cui says:
====================
Fix MANA RX with bounce buffering
With swiotlb=force, the MANA NIC fails to work properly due to commit
730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead
of full pages to improve memory efficiency.").
This happens because, with the standard MTU=1500, the aforementioned
commit uses page pool frags with PP_FLAG_DMA_MAP, but fails to call
page_pool_dma_sync_for_cpu() to sync the received packet for CPU acces
before handing the RX buffer to the stack.
Here patch #2 adds the required page_pool_dma_sync_for_cpu().
Patch #1 validates the packet length reported by the NIC. With patch #2,
page_pool_dma_sync_for_cpu() uses the packet length, so we don't want
to blindly trust the packet length, just in case.
There is no change between v2 and v3.
v3 just swaps the order of the 2 patches in v2, as suggested by Simon [3].
References:
[1] v1: https://lore.kernel.org/netdev/20260618035029.249361-1-decui@microsoft.com/
[2] v2: https://lore.kernel.org/netdev/20260624222605.1794719-1-decui@microsoft.com/
[3] https://lore.kernel.org/netdev/20260626145048.GB1310988@horms.kernel.org/
====================
Link: https://patch.msgid.link/20260702041237.617719-1-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted.
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcp_mmap.c, both child_thread() and main() allocate an EVP_MD_CTX
via EVP_MD_CTX_new() when integrity checking is enabled, but neither
function releases the context. child_thread() misses the free in its
common cleanup block, and main() returns without freeing the context.
This results in a SHA256 context leak on every run that uses the
‑i (integrity) option. Add the missing EVP_MD_CTX_free() calls to
the appropriate cleanup paths to fix the leak.
Fixes: 5c5945dc69 ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Link: https://patch.msgid.link/20260702025949.442523-1-wangyan01@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no need to clear cmma-dirty state if the VM is not using CMMA.
Skip the CMMA-related code if CMMA is not in use.
Fixes: 6cfd47f91f ("KVM: s390: Fix cmma dirty tracking")
Fixes: 190df4a212 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
If a walk entry handler for a lower level returns a value,
dat_crste_walk_range() will not return immediately, but instead loop
again and move to the next entry.
This means that some entries are potentially skipped, and early return
is ignored. Skipped entries might lead to all kinds of issues, given
that the caller expects them to not be skipped. Early return is often
used to interrupt a walk when a rescheduling is needed; if it is
ignored it can lead to stalls.
Fix by breaking from the loop immediately if the walk to a lower level
returned non-zero.
Fixes: 2db149a0a6 ("KVM: s390: KVM page table management functions: walks")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The natural lock ordering is mmu_lock -> children_lock, but in
gmap_create_shadow() the reverse order is used when handling shadowing
of real address spaces.
Convert the inner locking of kvm->mmu_lock to a trylock; return -EAGAIN
if the lock is busy, and let the caller try again.
This path is not expected to happen in real-life scenarios, so its
performance is not important.
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
kvm_s390_gisc_register() registers the guest ISC before pinning
the guest interrupt forwarding pages and allocating the AISB bit.
If any of the later setup steps fails, the function unwinds the
pinned pages and other local state, but does not unregister the
GISC reference. Add the missing kvm_s390_gisc_unregister() to the
error unwind path.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260624061910.2794734-1-haoxiang_li2024@163.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
check_ioapic_information() verifies whether the BIOS has provided a valid
device ID for the Southbridge (SB) IOAPIC in the IVRS table. Currently,
if the SB IOAPIC entry in the IVRS table does not match a historically
hardcoded device ID (00:14.0), interrupt remapping is forcibly disabled.
This hardcoded expectation does not scale to newer architectures. For
example, recent Hygon Gen 4 servers use 00:0b.0 for the SB IOAPIC, which
originally caused the validation to fail and interrupt remapping to be
disabled until this device ID was added upstream.
Instead of maintaining per-vendor/per-generation hardcoded device IDs,
dynamically verify the SB IOAPIC by reading its PCI configuration space.
Because the SB IOAPIC is embedded within the FCH (Fusion Controller Hub)
and shares its device ID, we can inspect the PCI class code of the given
device ID to confirm it is an actual FCH device (a SMBus controller or ISA
Bridge).
Signed-off-by: Wei Wang <wei.w.wang@hotmail.com>
Tested-by: Yongwei Xu <xuyongwei@open-hieco.net>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The check_ioapic_information() function is designed to prevent boot hangs
by ensuring the Southbridge (SB) IOAPIC is properly mapped in the IVRS
table before enabling Interrupt Remapping.
Currently, this check passes if *any* enumerated IOAPIC matches the
expected SB IOAPIC device ID. If a buggy BIOS incorrectly assigns the
SB IOAPIC's device ID to a secondary IOAPIC in the IVRS, while scrambling
the true SB IOAPIC's mapping, the check hits a false positive and
succeeds.
This erroneously enables Interrupt Remapping. Consequently, the IOMMU
blocks unmapped interrupts from the actual SB IOAPIC, dropping the system
timer and leading to a silent kernel boot hang.
Tighten the validation to verify the device ID specifically against the SB
IOAPIC by matching their APIC IDs first. This prevents the validation
check from being bypassed via device ID aliasing.
Fixes: c2ff5cf529 ("iommu/amd: Work around wrong IOAPIC device-id in IVRS table")
Signed-off-by: Wei Wang <wei.w.wang@hotmail.com>
Tested-by: Yongwei Xu <xuyongwei@open-hieco.net>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The check_ioapic_information() function validates IOAPICs against the
IVRS table to safely disable Interrupt Remapping (IR) if the BIOS provides
a broken topology.
Currently, the validation loop contains a bug: If an unmapped secondary
IOAPIC is encountered, 'ret' is set to false. But if the Southbridge (SB)
IOAPIC is enumerated after it in the MADT, the loop overwrites 'ret' to
true.
This bypasses the validation failure and leaves IR enabled. When devices
attached to the unmapped secondary IOAPIC fire interrupts, the IOMMU drops
them due to the missing Requestor ID, leading to localized device hangs.
Fix this by initializing 'ret' to true and only toggling it to false
upon encountering a validation error, ensuring failures are never erased.
Fixes: c2ff5cf529 ("iommu/amd: Work around wrong IOAPIC device-id in IVRS table")
Signed-off-by: Wei Wang <wei.w.wang@hotmail.com>
Tested-by: Yongwei Xu <xuyongwei@open-hieco.net>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If dynamic memory allocation in driver's probe function execution fails,
it should be reported to the driver's framework with -ENOMEM error code.
Fixes: 109bd48ea2 ("iommu/msm: Add DT adaptation")
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Commit 5816bf4273 ("lsm,selinux: Add LSM blob support for BPF objects")
made the LSM hook wrappers for BPF object creation clean up the LSM
state internally upon denial, e.g. security_bpf_map_create() internally
calls security_bpf_map_free() when the bpf_map_create hook returns an
error. map_create() however still routes a denial to its free_map_sec
label, which invokes security_bpf_map_free() a second time, so the
bpf_map_free hook fires twice for a single denied map.
In-tree LSMs are unaffected in practice since the blob kfree() inside
security_bpf_map_free() is NULL-safe and idempotent and none of them
implement bpf_map_free, but a BPF LSM program attached to that hook
observes double invocations. Route the denial to free_map instead.
Fixes: 5816bf4273 ("lsm,selinux: Add LSM blob support for BPF objects")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260709073422.379247-1-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
All types in `bindings` implement `Zeroable` if they can. This enables
using `Zeroable::zeroed` for `io_pgtable_cfg` initialization instead
of relying on `..unsafe { core::mem::zeroed() }`.
This change improves readability and removes an unnecessary unsafe
block.
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Acked-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The mt2701_m4u_in_larb[] array contains 4 (for LARB0 to LARB3)
elements, meaning mt2701_m4u_to_larb() can legitimately return 3.
The current check `if (larbid >= MT2701_LARB_NR_MAX)` incorrectly
rejects valid LARB3 with -EINVAL.
Fix this off-by-one error by updating MT2701_LARB_NR_MAX to 4.
Note that this does not cause immediate issues with the current
mt2701.dtsi and mt7623n.dtsi because it only defines 3 LARBs:
mediatek,larbs = <&larb0 &larb1 &larb2>;
Thus, larbid never reaches 3 in the existing upstream device tree.
Fixes: de78657e16 ("iommu/mediatek: Fix NULL pointer dereference when printing dev_name")
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Update the Intel VT-d driver to handle ATS configuration and enablement
more strictly. Specifically, update the device probe to fail if
pci_prepare_ats() returns an error. This ensures that any ATS-capable
master reaching the attach phase is guaranteed to have a valid config.
Additionally, update iommu_enable_pci_ats() to WARN() if pci_enable_ats
fails. Since earlier checks in the probe phase preclude config-related
failures, any failure during hardware enablement is considered a kernel
bug.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Update arm_smmu_enable_ats() to wrap the pci_enable_ats() call in a
WARN(). Since probe-time checks now preclude configuration errors
any failure during hardware enablement is considered a kernel bug.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
While every PCI Function that implements ATS has an independent ATS
Extended Capability structure with a Read/Write Smallest Translation
Unit (STU) field, the kernel manages SR-IOV ATS by requiring the IOMMU
driver to configure the STU on the Physical Function (PF) before any
any Virtual Functions (VFs) are created.
Currently, pci_prepare_ats() bails out early for VFs, assuming that the
PF has already been correctly prepared. However, this creates a potential
mismatch if a VF is subsequently prepared with a different page shift.
Update pci_prepare_ats() to validate that the requested page shift (ps)
matches the STU already configured in the associated PF. This ensures
early detection of incompatible configurations and maintains the kernel's
policy of consistent STU sizing across all functions associated with a
given SMMU.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Update pci_ats_supported() to additionally check the associated PF's
status when called on a VF. This ensures that PF-level quirks and
untrusted status are correctly propagated to VFs, providing a robust
support check that aligns with the kernel's PF-centric ATS configuration
model and is immune to the timing of VF-specific fixups.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The .driver_data member of the struct pci_device_id array were
initialized by a list expressions to zero without making use of that
value. In this case it's better to not specify a value at all and let
the compiler fill in the zeros. Same for the list terminator that can
better be completely empty.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add KUnit tests for DP link fallback selection across eDP, SST, and MST.
Verify that the fallback logic properly selects the maximum allowed
configuration, iterates through allowed configurations, and disables
failed configs as expected.
These tests include UHBR vs. non-UHBR conditions, MST vs. SST mode,
and validate that subsequent fallback selections respect the updated
allowed configuration mask.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-35-imre.deak@intel.com
Add KUnit tests for link_caps updates shrinking or expanding the
supported rates and lane counts.
The tests also cover updates with disabled configurations, including
random shrink and expand sequences, to verify that disabled state,
allowed configurations, ordering, and max limits stay consistent across
updates.
v2: Remove test cases for the now unused merge update mode.
v3:
- Test config iteration in lane count, rate order as well.
- Keep space after comma in code comment. (Michał)
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v2
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260707124849.135319-4-imre.deak@intel.com
Add a simple baseline test for DP link caps iteration using a fixed
standard DP configuration table. This provides a minimal validity check,
independent of more complex test setups, verifying the iterator returns
expected configurations in ascending and descending order.
v2: Unchanged.
v3: Test config iteration in lane count, rate order as well.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v2
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260707124849.135319-3-imre.deak@intel.com
Export the link caps and link training helpers needed by the DP link
KUnit tests.
Use test ops tables instead of exporting the helpers directly, avoiding
symbol name collisions between the i915 and xe builds of the shared
display code.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-32-imre.deak@intel.com
Initialize a reusable test context for DP link KUnit tests. Sets up
minimal device, connector, encoder, and DP structures, and seeds the
pseudo-random generator for deterministic test runs.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-31-imre.deak@intel.com
Hook the shared i915 display DP link KUnit tests into the xe display
test build.
Build the shared display test source from the i915 display test directory
when xe display support is enabled.
v2: Unchanged.
v3: Add SPDX license header. (Michał)
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260707124849.135319-2-imre.deak@intel.com
Add a separate xe KUnit config for display tests.
The existing xe .kunitconfig builds xe statically, which is suitable for
non-display xe tests. The display code can only be enabled for xe when
xe is built as a module, so add a separate display config with DRM_XE=m
and DRM_XE_DISPLAY=y.
This can be folded back into the main xe KUnit config once the display
code becomes a separate module.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-29-imre.deak@intel.com
Add KUnit configuration for i915 and a local .kunitconfig to run the
tests.
v2: Unchanged.
v3: Remove kconfig options for kernel debug.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v2
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260707124849.135319-1-imre.deak@intel.com
Disable the link configuration that failed training when selecting
fallback parameters.
Fallback still selects the next configuration using the existing
fallback order, but now also removes the failed configuration from the
allowed set. Functionally, this only affects the case where an MST <-> SST
mode switch occurs on the same root connector: previously, a configuration
that failed training in one mode could be reused in the other mode due
to the differing config iteration orders.
The current fallback logic also sets a temporary maximum link limit
across the allowed configurations to constrain subsequent modesets. This
legacy behavior is preserved for now; it will be removed once the
fallback logic relies solely on the individually disabled configurations
to restrict the allowed set.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-26-imre.deak@intel.com
Switch the fallback loop to use the link configuration iterator to
select a fallback configuration.
This also allows unexporting and removing from the link caps interface
all the common link rate query helpers and the helpers that accept or
return a link configuration index.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-25-imre.deak@intel.com
The target maximum rate/lane count selected by the fallback logic may
exceed the current link_caps max_limits' rate/lane count, the latter of
which are used as a limit by the lookup functions when filtering allowed
configurations. To ensure the fallback search finds all relevant
candidates, temporarily reset the link_caps max_limits to the maximum
common supported capabilities.
After the fallback search completes, set the link_caps max_limits to the
configuration selected by the fallback logic, as before, determining
the allowed configurations for a subsequent modeset.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-24-imre.deak@intel.com
Remove the min/max rate and lane count fields from struct
link_config_limits after all state computation is converted to use the
configuration filter.
A simple min/max range cannot fully describe the valid configuration
set once individual configurations are disabled (for example by
fallback), as it may allow combinations that are not actually valid.
The configuration filter, on the other hand, always represents a
consistent set of valid configurations.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-23-imre.deak@intel.com
Use the link caps helper to select the maximum DP MST link configuration
for DSC computation, instead of using the separate max rate and lane
count limits, which may not form a valid configuration after individual
configs are disabled by fallback.
Also look up the maximum rate for state computation via the configuration
mask when checking the DSC hblank expansion quirk.
This is a step towards unifying configuration selection and iteration
across connector types and between compute and fallback paths.
The state computation should likely consider all allowed configurations,
as noted in the code comment; for now keep the existing DP MST DSC
behavior of selecting the maximum BW configuration determined by the MST
connector BW config iteration order.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-22-imre.deak@intel.com
Use the link caps helper to select the maximum MST link configuration
for non-DSC computation, instead of using the separate max rate and lane
count limits, which may not form a valid configuration after individual
configs are disabled by fallback.
This is a step towards unifying configuration selection and iteration
across connector types and between compute and fallback paths.
In some cases all configurations should be considered, as noted in the
code comment; for now keep the existing behavior of selecting the
maximum bandwidth configuration as determined by the MST connector's BW
config iteration order.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-21-imre.deak@intel.com
Use the link caps helper to select the maximum eDP link configuration
for DSC computation, instead of using the separate max rate and lane
count limits, which may not form a valid configuration after individual
configs are disabled by fallback.
This is a step towards unifying configuration selection and iteration
across connector types and between compute and fallback paths.
The state computation should likely consider all allowed configurations,
as noted in the code comment; for now keep the existing eDP DSC behavior
of selecting the maximum configuration determined by the eDP connector
rate / lane config iteration order.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-20-imre.deak@intel.com
Use the link caps configuration iterator for DP SST link configuration
computation for DSC mode. This is a step towards unifying configuration
selection and iteration across connector types and between compute and
fallback paths.
The iteration preserves the DP SST connector rate/lane ordering used by
the current code.
This also allows removing the now unused common rate count helper.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-19-imre.deak@intel.com
Use the link caps configuration iterator for DP SST link configuration
computation for non-DSC mode. This is a step towards unifying
configuration selection and iteration across connector types and between
compute and fallback paths.
The iteration preserves the DP SST connector rate/lane ordering used by
the current code.
This also allows removing the now unused common rate count helper.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-18-imre.deak@intel.com
Use the link caps configuration mask when applying DP compliance test
link parameters during state computation.
Preserve the legacy behavior of falling back to all configurations with
the requested lane count if the requested rate and lane count pair is
not allowed.
In case no valid configuration is found fail the modeset.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-17-imre.deak@intel.com
Query the maximum link BW configuration via the link caps interface to
compute the available TBT bandwidth. Unlike the max common link params
used so far for this, the max BW config also accounts for any forced
link parameters.
This makes the max BW link config query uniform across mode validation
and TBT BW calculation, and allows unexporting the
intel_dp_link_caps_max_common_lane_count() helper.
v2: Use the max BW link configuration, instead of the max link limits.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-16-imre.deak@intel.com
