Query the maximum link BW configuration during mode validation and MST
link probing directly from intel_dp_link_caps_get_max_bw_config(),
instead of using the intel_dp_max_link_rate() and
intel_dp_max_lane_count() helpers.
This makes the max BW link config query uniform across mode validation
and TBT BW calculation, and allows unexporting the
intel_dp_max_link_rate()/intel_dp_max_lane_count() helpers.
v2: Use the max BW link configuration, instead of the max link limits.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-15-imre.deak@intel.com
Add a helper to query the link configuration among the currently allowed
configurations with the maximum link BW.
This will be used by follow-up changes to unify the max BW link config
query during mode validation and TBT BW calculation.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-14-imre.deak@intel.com
Add link_config_filter to link_config_limits to track the set of valid
link configurations during modeset state computation. Keep the existing
min/max rate and lane count limits for now, until all users are
converted to use the configuration filter.
Add the helpers required to select the maximum configuration from the
currently allowed configuration set. This will be used by follow-up
changes as well to query the maximum link configuration without having
to iterate the configurations.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Rebase on changes using an iteration object.
v3:
- Add TODO: label to code comment about min/max link config limit
removal. (Luca)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-13-imre.deak@intel.com
intel_engine_user.c checks CONFIG_DRM_I915_SELFTESTS before running
the engine UABI isolation check. Kconfig defines DRM_I915_SELFTEST,
without the trailing "S", and the rest of i915 uses
CONFIG_DRM_I915_SELFTEST.
Because CONFIG_DRM_I915_SELFTESTS is not backed by any Kconfig symbol,
the IS_ENABLED() test is always false. Use the existing selftest symbol
so the debug/selftest guarded path can be reached when selftests are
enabled.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the Kconfig definition and the inconsistent
guard in intel_engine_user.c.
Fixes: 750e76b4f9 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260705080225.436-1-pengpeng@iscas.ac.cn
Add a debugfs entry showing the currently allowed link configurations
in the connector's iteration order.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-12-imre.deak@intel.com
There is no need to update any maximum link information when updating
the max link limits, so drop the related noupdate postfix from the
helpers setting the max link limits.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-11-imre.deak@intel.com
Re-enable link configurations after sink capabilities change or the link
got reset before updating the link capabilities (due to an RX_CAP_CHANGED
HPD IRQ for the currently connected sink, or a new sink getting
connected).
This makes resetting the link explicitly by calling
intel_dp_link_caps_reset() subsequently redundant; keep the existing
behavior wrt. this for now, adding only a TODO: to remove the explicit
reset.
While at it add documentation for intel_dp_link_caps_update().
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-10-imre.deak@intel.com
Re-enable link configurations after the link is reset via a call
to intel_dp_link_caps_reset(), allowing a subsequent modeset to
use all the link configurations of a sink newly connected or an already
connected sink changing its capabilities.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-9-imre.deak@intel.com
Add a filter for enabled link configurations to the link capability
state.
This allows fallback code to disable only the configuration that failed
link training, instead of constraining later modesets via maximum link
rate or lane count. The code only needs to exclude the failed
configuration from the allowed set; all other supported configurations
remain available.
Use the filter when computing the allowed configuration set and when
validating maximum link limits.
Follow-up changes will switch the fallback code to disable individual
configurations through this filter.
v2:
- Rebase on changes using a filter object instead of a mask of
configuration indices.
- Track the enabled configurations instead of the disabled ones.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-8-imre.deak@intel.com
Add validation in intel_dp_link_caps_set_max_limits() to ensure that
the new maximum rate and lane count leave at least one allowed
configuration.
The validation takes disabled configurations and active forced
parameters into account. Disabled configurations are not supported yet,
so that part has no effect for now.
At the moment this validation is also performed by the link training
fallback code, but that will be removed later, leaving only the link
caps module to perform the validation added in this patch.
v2: Rebase on changes using a filter object instead of a mask of
configuration indices.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-7-imre.deak@intel.com
Add helper to select the link configuration iteration order for a
connector during state computation and fallback selection. This keeps
the connector-specific ordering policy in the link caps module.
v2: Add helper to get the order for fallback selection as well.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-6-imre.deak@intel.com
Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v4:
- avoid possible deadlocks with locking context (Sashiko)
v3:
- drop excessive state validation (Jani)
- acquire plane and CRTC mutices (Sashiko)
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/
Co-authored-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d8c4bddcd8 ("drm/fb-helper: Synchronize dirty worker with vblank")
Tested-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Closes: https://bugs.debian.org/1138033
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260702145021.226932-1-tzimmermann@suse.de
Add helpers to iterate over the allowed and optionally filtered set of
link configurations in a given order.
Taking into account disabled configurations will be added later when
adding support for disabling configurations.
Use the BW order in descending direction by default.
v2:
- Keep the iteration state in an iteration object. (Jani)
- Use a filter object instead of exposing configuration indices. (Jani)
- Move changes adding helpers required to setup the iteration object to
this patch.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-5-imre.deak@intel.com
Add support for iterating configurations in either link rate/lane count
or lane count/link rate order. Both orders are required for DP SST
connector types: the former for computing the connector state during a
modeset, and the latter for selecting a fallback configuration after a
link training failure.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-4-imre.deak@intel.com
Factor out a helper that looks up a link configuration by index.
This provides the link configuration directly, avoiding the
indirect conversion via the packed config entry.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260701153204.4124150-3-imre.deak@intel.com
After commit f8fce75fed ("fuse: clear intr_entry in fuse_resend and
fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in
fuse_request_free() still triggers due to the following race:
In request_wait_answer()
if (test_bit(FR_SENT, &req->flags)) -> returns true
In fuse_chan_resend()
clear_bit(FR_SENT, &req->flags)
In request_wait_answer()
queue_interrupt(req)
Fix by:
- move clearing FR_SENT inside fpq->lock
- move setting FR_PENDING inside fiq->lock
- recheck FR_SENT after acquiring fiq->lock in fuse_dev_queue_interrupt()
Reported-by: zdi-disclosures@trendmicro.com
Fixes: f8fce75fed ("fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tiezhu Yang says:
====================
Introduce jit_required to prevent a kernel panic
This series introduces a 'jit_required' flag in struct bpf_prog
to track programs that strictly require JIT.
The aim is to prevent a kernel panic by rejecting programs with
inlined helpers when JIT is not available.
v8 -> v9:
-- Initialize 'fp->jit_required' with
'IS_ENABLED(CONFIG_BPF_JIT_ALWAYS_ON)'
in bpf_prog_alloc_no_stats()
-- Simplify __bpf_prog_select_runtime()
-- Simplify the commit description for patch 1
-- Enhance the commit description for patch 2
====================
Link: https://patch.msgid.link/20260708101806.18885-1-yangtiezhu@loongson.cn
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic.
Fixes: 2ddec2c80b ("riscv, bpf: inline bpf_get_smp_processor_id()")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Introduce a 'jit_required' bitfield flag in struct bpf_prog to track
whether a BPF program strictly requires the JIT compiler to run. This
prevents a dangerous runtime fallback to the interpreter for features
that are only implemented in the JIT compiler.
Currently, bpf_prog_has_kfunc_call() is used only for kernel function
calls, replace the kfunc-specific helper with the new 'jit_required'
flag. This makes it easy to support other JIT-only BPF features, such
as inlined helpers.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: KaFai Wan <kafai.wan@linux.dev>
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
The NXP IW61x series SDIO chipset identifies itself with a base card ID
(0x0204) during the initial MMC bus scan, while the specific WLAN
function reports a different ID (0x0205).
To ensure that the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE quirk is correctly
inherited by all SDIO functions (including Wi-Fi), it must be attached
to the base card ID at the core level.
Add the SDIO_DEVICE_ID_NXP_IW61X_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures through a common unwind path that drops the DL
channel reference, the UL channel reference, and the initial reference
from device_initialize().
Fixes: 297c77a0f2 ("bus: mhi: ep: Add support for creating and destroying MHI EP devices")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260603195142.2189386-1-dbgh9129@gmail.com
bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without
holding a reference on the mm. On a foreign task, a concurrent exit_mm()
can free the mm_struct between the lockless read and the trylock,
resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU.
For the current task, task->mm is stable. For a foreign task, pin the mm
under task->alloc_lock and release it with mmput_async(), mirroring commit
d8e27d2d22 ("bpf: fix mm lifecycle in open-coded task_vma iterator").
Use spin_trylock() instead of get_task_mm() so BPF context does not block
on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the
foreign-task path because dropping the mm reference is not safe there.
Race:
CPU0 (BPF program) CPU1 (exiting task)
============================ ==========================
bpf_find_vma(foreign_task):
mm = task->mm
exit_mm():
task->mm = NULL
mmput(mm) -> frees mm_struct
mmap_read_trylock(mm)
// UAF on mm
Fixes: 7c7e3d31e7 ("bpf: Introduce helper bpf_find_vma")
Signed-off-by: Sanghyun Park <sanghyun.park.cnu@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260708072106.199637-2-sanghyun.park.cnu@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Bring forward the idea to fix the power down latency in
mhi_pm_disable_transition() further to mhi_pm_sys_error_transition()
so that the transition into system error (triggered by AT!RESET) in the
modems won't have to return only after the timeout of up to 24 seconds.
Once the device gets reset, there is no guarantee that it will send an
interrupt to indicate the state transition. So polling is the sensible
option here.
Signed-off-by: Qingtao Cao <qingtao.cao.au@gmail.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603011333.3306102-2-qingtao.cao.au@gmail.com
Usual mixed bag of recently introduced issues and much older ones.
core
- Ensure kfifo is reset before fd is allocated avoiding concurrent use of
fifo with reset.
multiple drivers
- Fix up missing Kconfig dependencies.
hid-sensors
- Add support for multibyte read as necessary precursor to...
- Fix stale or zero output when reading raw values for quaternions.
adi,adis
- Add IRQF_NO_THREAD to ensure interrupt is not pushed to the software
interrupt chip used for trigger demux in the IIO core from a thread.
bosch,bmc150
- Hardening against device returning a reserved out of range value for
how many entries are in the FIFO.
bosch,bmi160
- Add IRQF_NO_THREAD to ensure interrupt is not pushed to the software
interrupt chip used for trigger demux in the IIO core from a thread.
dynaimage,al3010
- Fix wrong scale for highest gain_range due to too many digits in the
micro part (val2).
freescale,mpl3115
- Fix unbalanced runtime pm on error in read_raw().
invensens,icm42600
- Avoid wrong divisor for fifo timestamps when using the watermark
interrupt.
- Fix timestamp accuracy loss due to excessive divisor for calculations.
kionix,kxsd9
- Fix unbalanced runtime pm on an error in write_raw().
microchip,mcp37feb02
- Fix an uninitialized reference voltage value for particular DT config.
melix,mlx90635
- Build on basis of right Kconfig symbol.
nxp,lpc32xx
- Ensure completion initialized before requesting irq. Hardening against
spurious IRQ.
nxp,saradc
- Fix a delay calculation.
sharp,gp2ap0002
- Fix unbalanced runtime pm on error in read_raw().
st,lsm6dsx
- Fix an issue seen in wild where an unplanned CPU reset can leave the
device on the wrong register page, thus leaving the driver wedged.
st,st_sensors library
- Make sure to handle a device that provides data as big endian correctly.
st,spear
- Ensure completion initialized before requesting irq. Hardening against
spurious IRQ.
taos,tsl2591
- Don't eat return from devm_request_threaded_irq() as that breaks
deferred probing.
ti,ads1119
- Fix a pm reference count leak in an error path.
ti,ads124s08
- Handle gpio look up errors correctly.
-----BEGIN PGP SIGNATURE-----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=Eph0
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 7.2 cycle
Usual mixed bag of recently introduced issues and much older ones.
core
- Ensure kfifo is reset before fd is allocated avoiding concurrent use of
fifo with reset.
multiple drivers
- Fix up missing Kconfig dependencies.
hid-sensors
- Add support for multibyte read as necessary precursor to...
- Fix stale or zero output when reading raw values for quaternions.
adi,adis
- Add IRQF_NO_THREAD to ensure interrupt is not pushed to the software
interrupt chip used for trigger demux in the IIO core from a thread.
bosch,bmc150
- Hardening against device returning a reserved out of range value for
how many entries are in the FIFO.
bosch,bmi160
- Add IRQF_NO_THREAD to ensure interrupt is not pushed to the software
interrupt chip used for trigger demux in the IIO core from a thread.
dynaimage,al3010
- Fix wrong scale for highest gain_range due to too many digits in the
micro part (val2).
freescale,mpl3115
- Fix unbalanced runtime pm on error in read_raw().
invensens,icm42600
- Avoid wrong divisor for fifo timestamps when using the watermark
interrupt.
- Fix timestamp accuracy loss due to excessive divisor for calculations.
kionix,kxsd9
- Fix unbalanced runtime pm on an error in write_raw().
microchip,mcp37feb02
- Fix an uninitialized reference voltage value for particular DT config.
melix,mlx90635
- Build on basis of right Kconfig symbol.
nxp,lpc32xx
- Ensure completion initialized before requesting irq. Hardening against
spurious IRQ.
nxp,saradc
- Fix a delay calculation.
sharp,gp2ap0002
- Fix unbalanced runtime pm on error in read_raw().
st,lsm6dsx
- Fix an issue seen in wild where an unplanned CPU reset can leave the
device on the wrong register page, thus leaving the driver wedged.
st,st_sensors library
- Make sure to handle a device that provides data as big endian correctly.
st,spear
- Ensure completion initialized before requesting irq. Hardening against
spurious IRQ.
taos,tsl2591
- Don't eat return from devm_request_threaded_irq() as that breaks
deferred probing.
ti,ads1119
- Fix a pm reference count leak in an error path.
ti,ads124s08
- Handle gpio look up errors correctly.
* tag 'iio-fixes-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
iio: light: al3010: add missing REGMAP_I2C to Kconfig
iio: light: al3000a: add missing REGMAP_I2C to Kconfig
iio: common: st_sensors: honour channel endianness in read_axis_data
iio: imu: bmi160: add IRQF_NO_THREAD to data-ready trigger IRQ
iio: imu: adis: add IRQF_NO_THREAD to non-FIFO trigger IRQ
iio: hid-sensor-rotation: Fix stale or zero output when reading raw values
HID: sensor-hub: Add sensor_hub_input_attr_read_values() for multi-byte reads
iio: adc: spear: Initialize completion before requesting IRQ
...
efi_recover_from_page_fault() was renamed to
efi_crash_gracefully_on_page_fault(), but the comment above enum
efi_rts_ids was not updated. Use the current name.
Fixes: c46f52231e ("x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Daniel Borkmann says:
====================
Misc BPF fixes from sashiko findings
Addressing some misc/random findings from sashiko that are worth fixing
which popped up as pre-existing issues while working on the signed BPF
loader series.
====================
Link: https://patch.msgid.link/20260708211537.371874-1-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_prog_calc_tag() copies the instructions into a plain vmalloc() scratch
buffer to blind the map fds before hashing. The buffer scales with the
program, up to ~8MB at the 1M instruction limit, and is allocated on every
program load, but unlike the rest of the load-time scratch memory it is
not charged to the loader's memcg. Use GFP_KERNEL_ACCOUNT to account it
like the other allocations scoped to the verification/load.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708211537.371874-5-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The insn_aux_data array is allocated with a plain vzalloc(), while every
other allocation scoped to the verification - verifier states, explored
states, the cfg/scc arrays, liveness masks, jump history - is charged to
the loader's memcg via GFP_KERNEL_ACCOUNT.
At 136 bytes per instruction it is one of the largest verification-time
buffers, in the range of ~130MB for a program at the 1M instruction limit
(worst case), and it lives across the whole verification. The buffer is
also inconsistent with itself: when instruction patching grows it, the
vrealloc() in bpf_patch_insn_data() already passes GFP_KERNEL_ACCOUNT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708211537.371874-4-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_get_btf_vmlinux() serializes the lazy vmlinux BTF parse with
bpf_verifier_lock, the same mutex bpf_check() holds across the whole
verification of an unprivileged program (if enabled; it's disabled
by default). The latter can potentially stall the mutex holder for
a long time (e.g. via userfaultfd), and therefore block first-time
bpf_get_btf_vmlinux() caller from any context, including privileged
program loads.
Give the vmlinux BTF initialization a dedicated btf_vmlinux_lock so
it is independent of the unprivileged verification mutex. The parse
only needs mutual exclusion against itself.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708211537.371874-3-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals.
Fixes: 8580ac9404 ("bpf: Process in-kernel BTF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708211537.371874-2-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Both DP MST and UHBR SST require the audio component to use a real
cpu_transcoder (>= 0) value to identify the audio stream on a port.
For DP MST this was already handled; for UHBR SST it was not, causing
pin_eld_notify() to signal cpu_transcoder = -1 (the legacy SST sentinel)
and find_audio_state() to skip the per-transcoder entry for the UHBR
stream.
After suspend/resume or replug, the ELD lookup fails and audio goes
silent. Fix by detecting UHBR SST alongside DP MST when deciding
whether a real cpu_transcoder value must be used for audio state
addressing, in both the pin_eld_notify() signalling and the
find_audio_state() lookup paths.
--v2:
- Commit message and comment update. (Suraj)
- Change function name has_mst_transcoder. (Suraj)
- Avoid Live crtc access in find_audio_state. (Suraj)
--v3:
- Minor comment changes to avoid MST over 128b/132b confusion. (Suraj)
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260708113558.1863316-1-mitulkumar.ajitkumar.golani@intel.com
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use.
Fixes: d79c9e9d4b ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260707065304.949135-1-nihaal@cse.iitm.ac.in
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SG_GET_REQUEST_TABLE reports per-request diagnostic state through
sg_req_info::problem. The field is meant to indicate whether there is an
error to report for a completed request.
sg_fill_request_table() currently combines masked_status, host_status
and driver_status with bitwise AND. This only reports a problem when all
three status fields are non-zero at the same time. A normal target check
condition, for example, has masked_status set while host_status and
driver_status may both be zero, so the request is incorrectly reported
as clean.
Use the same condition as sg_new_read(), which sets SG_INFO_CHECK when
any of the three status fields is non-zero.
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/54B60C19F7DB8889+20260707030845.970018-1-raoxu@uniontech.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The trace events in drivers/ufs/core/ufs_trace.h were converted to take
a pointer to the hba structure as an argument for the tracepoint and
then in TP_printk() the printing of the dev_name from the ring buffer
was converted to using the dev dereferenced pointer from the hba saved
pointer.
This is not allowed as the TP_printk() is executed at the time the trace
event is read from /sys/kernel/tracing/trace file. That can happen
literally, seconds, minutes, hours, weeks, days, or even months later!
There is no guarantee that the hba pointer will still exist by the time
it is dereferenced when the "trace" file is read.
Instead, save the device name from the hba pointer at the time the
tracepoint is called and place it into the ring buffer event. Then the
TP_printk() can read the name directly from the ring buffer and remove
the possibility that it will read a freed pointer and crash the kernel.
This was detected when testing the trace event code that looks for
TP_printk() parameters doing illegal derferences[1]
[1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: 583e518e71 ("scsi: ufs: core: Add hba parameter to trace events")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260630185412.283c26c5@gandalf.local.home
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are several places where printing functions are being passed
parameters that have not been through endian conversion functions. Use
virtio32_to_cpu() to fix the warnings.
Fixes the following warnings from (prototype) sparse:
drivers/scsi/virtio_scsi.c:126:9: warning: incorrect type in argument 7 (different base types)
drivers/scsi/virtio_scsi.c:126:9: expected unsigned int
drivers/scsi/virtio_scsi.c:126:9: got restricted __virtio32 [usertype] sense_len
drivers/scsi/virtio_scsi.c:312:17: warning: incorrect type in argument 2 (different base types)
drivers/scsi/virtio_scsi.c:312:17: expected unsigned int
drivers/scsi/virtio_scsi.c:312:17: got restricted __virtio32 [usertype] reason
drivers/scsi/virtio_scsi.c:412:17: warning: incorrect type in argument 2 (different base types)
drivers/scsi/virtio_scsi.c:412:17: expected unsigned int
drivers/scsi/virtio_scsi.c:412:17: got restricted __virtio32 [usertype] event
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260623132427.838900-1-ben.dooks@codethink.co.uk
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code.
Fixes: cba6cfdc7c ("regulator: core: Avoid lockdep reports when resolving supplies")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260708235722.2953579-1-ttabi@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current kallsyms detection in dso__is_kallsyms() uses the
dso_binary_type enum which fixes the issue of kallsyms being cached in
the build-id cache for out-of-tree modules.
However, during build-id injection in perf record/inject, dso_binary_type
has not been explicitly set yet,so dso__binary_type() returns
DSO_BINARY_TYPE__NOT_FOUND instead of DSO_BINARY_TYPE__KALLSYMS for the
kernel DSO. The current check then fails to identify it as kallsyms,
causing build-id symlinks to not be created in ~/.debug/.build-id/ and
perf archive to fail with "Cannot stat" errors.
Steps to reproduce the issue:
1. rm -rf ~/.debug/.build-id
2. perf record sleep 1
3. perf archive
Fix by falling back to matching long_name against the known kallsyms
strings explicitly when binary_type is not yet set
(== DSO_BINARY_TYPE__NOT_FOUND). Use strcmp() for exact matching of
fixed names and strict validation for guest kallsyms with embedded PID
to prevent path traversal attacks.
Fixes: ebf0b33273 ("perf dso: fix dso__is_kallsyms() check")
Signed-off-by: Tanushree Shah <tshah@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit c68337442f ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq.
Fixes: 340cea84f6 ("cifs: open files should not hold ref on superblock")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU fifos are natively supported (created and recognized) at least by:
- Microsoft POSIX subsystem
- OpenNT/Interix subsystem
- Microsoft SFU (Windows Services for UNIX)
- Microsoft SUA (Subsystem for UNIX-based Applications)
- Windows NFS server (up to the Windows Server 2008 R2)
Windows NFS server since Windows Server 2012 uses new reparse point format
for storing new fifos, but still can recognize this old format (also in the
latest Windows Server 2022 version).
SFU-style fifo is empty regular file which has system attribute set.
These SFU-style fifos are already recognized by Linux SMB client.
But Linux SMB client is currently creating new SFU fifos in different
format which is not compatible with all those SFU-style consumers. Fix this
by creating new fifos in correct SFU format which would be recognized by
all those applications and also by existing Linux SMB clients.
This change affects only creating new fifos when mount option -o sfu is used.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU sockets are natively supported by Interix 3.0 subsystem and also by
later versions. It is part of Microsoft SFU (Windows Services for UNIX) and
Microsoft SUA (Subsystem for UNIX-based Applications). They can be created
and existing (stored on local disk or remote SMB share) can be recognized.
SFU sockets are recognized also by NFS server included in Windows Server.
Windows NFS server versions since Windows Server 2012 uses new reparse
point format for storing new sockets, but still can recognize this old
format (also in the latest Windows Server 2022 version).
SFU-style socket is a regular file which has system attribute set and
content of the file is one zero byte.
These SFU-style sockets are already recognized by Linux SMB client.
But Linux SMB client is currently creating new SFU socket in different
format which is not compatible with all those SFU applications. Fix this by
creating new sockets in correct SFU format which would be recognized by all
SFU, SUA, NFS and existing Linux SMB clients.
This change affects only creating new sockets when mount option -o sfu is used.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_rreq_done() updates the inode atime to current_time(inode) after a
netfs read. It then preserves the CIFS rule that atime should not be
older than mtime, because some applications break if atime is less than
mtime. That rule only requires clamping when atime < mtime.
The current check uses the raw non-zero result of timespec64_compare().
It therefore takes the clamp path for both atime < mtime and
atime > mtime. The latter is the normal case when reading an older file:
the newly recorded atime is newer than the file mtime. The completion
handler then immediately moves atime back to mtime, losing the access
time that was just recorded. Userspace tools that rely on atime, such as
stat, find -atime, backup tools or cold-data classifiers, can therefore
see a recently read CIFS file as not recently accessed.
This is easy to miss because the bug is silent: read I/O still succeeds,
no error is reported, and many systems either do not check atime after
reads or mount with policies such as relatime/noatime. It becomes
visible when a CIFS file has an mtime older than the current time, the
file is read, and the local inode atime is inspected before a later
revalidation replaces the cached timestamps.
Clamp only when atime is actually older than mtime. This matches the
same atime/mtime rule used when applying CIFS inode attributes.
Fixes: 69c3c023af ("cifs: Implement netfslib hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Specifying --field-separator option is stating you want CSV output.
Passing both --field-separator and --json-output is then stating
you want output to be in CSV and JSON format at same time.
Currently this combination is not rejected, and the outcome
is a malformed combination of CSV and JSON output.
This is because of inconsistencies in various printing functions,
some of them have if-else chains that start with
"Should I print JSON?", and some start with "Should I print CSV?".
Example of current output:
$ tools/perf/perf stat -x , -j -e cpu-migrations true
{"counter-value" : "0.000000", "unit" : "", "event" : "cpu-migrations", "event-runtime" : 474817, "pcnt-running" : 100.00,,
Instead reject the option combination,
with a helpful error message and non-zero exit code.
Example of new output:
$ tools/perf/perf stat -x , -j true
cannot use both --field-separator and --json-output
Usage: perf stat [<options>] [<command>]
-x, --field-separator <separator>
print counts with custom separator
-j, --json-output print counts in JSON format
Signed-off-by: Ivan Lazaric <ivan.lazaric1@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In tas2562_parse_dt(), the fallback lookup for the deprecated
"shut-down" GPIO property is broken due to a missing pair of braces.
The code intends to reset sdz_gpio to NULL only when the lookup
returns an error that is not -EPROBE_DEFER (so the driver gracefully
continues without a GPIO). However, without braces the statement:
tas2562->sdz_gpio = NULL;
falls outside the IS_ERR() check and is executed unconditionally
for every path through the if block, including a successful GPIO
lookup.
This means any device using the deprecated 'shut-down' DT property
will always have sdz_gpio == NULL after probe, making the GPIO
completely non-functional.
Fix this by adding the missing braces to scope the NULL assignment
inside the IS_ERR() branch, matching the pattern already used for
the primary 'shutdown' GPIO lookup above.
Fixes: f78a97003b ("ASoC: tas2562: Update shutdown GPIO property")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260706153109.10953-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Maintain backward compatibility by reintroducing the events that were
previously removed by commit 047979af3b ("perf vendor events amd:
Update Zen 5 core events"). Also set the deprecated flag and update
the descriptions to point users to the correct alternative.
Reported-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/all/CAP-5=fV_czvd-z4N7K+_SabxuOm9UUHRyBxNuchrtAgJL3OqOw@mail.gmail.com/
Fixes: 047979af3b ("perf vendor events amd: Update Zen 5 core events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use ERR_PTR() to print the error code symbolically.
This makes the failure easier to spot from IGT,
e.g. when the device is wedged.
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260624194618.2793571-6-sk.anirban@intel.com
The CT layer returns -ECANCELED regardless of whether cancellation
is due to a GT reset or a wedged device. Return -ENOTRECOVERABLE
on wedge so callers don't need xe_device_wedged() checks
to suppress spurious error logs.
Also document the return codes of xe_guc_ct_send() in kernel-doc form.
v2: Fix -ECANCELED description (Matt)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260624194618.2793571-5-sk.anirban@intel.com
When CONFIG_DRM_GPUSVM=n (e.g. um-allyesconfig), the only caller of
xe_pt_svm_userptr_notifier_lock() is compiled out, triggering:
drivers/gpu/drm/xe/xe_pt.c:1418:13: warning:
'xe_pt_svm_userptr_notifier_lock' defined but not used
[-Wunused-function]
The helpers cannot simply be removed in this case: the matching
xe_pt_svm_userptr_notifier_unlock() is also referenced from
xe_pt_update_ops_run(), which lives outside any DRM_GPUSVM ifdef and is
gated only at runtime by pt_update_ops->needs_svm_lock. The symbol must
exist in all builds.
Provide empty static inline stubs for !DRM_GPUSVM, matching the pattern
used by xe_svm_notifier_lock()/_unlock() in xe_svm.h.
Fixes: 80ccbd97ff ("drm/xe/userptr: Hold notifier_lock for write on inject test path")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606302210.QqcLbOEN-lkp@intel.com/
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630192221.2998168-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
