1a1daf097e ("PCI/PM: Remove unused pci_driver.suspend_late() hook")
removed the legacy .suspend_late() hook, which was the only user of the
"state" parameter to pci_legacy_suspend_late(), but it neglected to remove
the parameter.
Remove the unused "state" parameter to pci_legacy_suspend_late().
Link: https://lore.kernel.org/r/20221025193502.669091-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As of 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
As of 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
As of 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Convert agpgart-nvidia from legacy PCI power management to the generic
power management framework.
Previously agpgart-nvidia used legacy PCI power management, and
agp_nvidia_suspend() and agp_nvidia_resume() were responsible for both
device-specific things and generic PCI things:
agp_nvidia_suspend
pci_save_state <-- generic PCI
pci_set_power_state(PCI_D3hot) <-- generic PCI
agp_nvidia_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
nvidia_configure <-- device-specific
Convert to generic power management where the PCI bus PM methods do the
generic PCI things, and the driver needs only the device-specific part,
i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_nvidia_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_nvidia_resume # driver->pm->resume
nvidia_configure <-- device-specific
Based on 0aeddbd0cb ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Convert agpgart-ati from legacy PCI power management to the generic power
management framework.
Previously agpgart-ati used legacy PCI power management, and
agp_ati_suspend() and agp_ati_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state:
agp_ati_suspend
pci_save_state <-- generic PCI
pci_set_power_state(PCI_D3hot) <-- generic PCI
agp_ati_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
ati_configure <-- device-specific
With generic power management, the PCI bus PM methods do the generic PCI
things, and the driver needs only the device-specific part, i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_ati_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_ati_resume # driver->pm->resume
ati_configure <-- device-specific
Based on 0aeddbd0cb ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Convert agpgart-amdk7 from legacy PCI power management to the generic power
management framework.
Previously agpgart-amdk7 used legacy PCI power management, and
agp_amdk7_suspend() and agp_amdk7_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state:
agp_amdk7_suspend
pci_save_state <-- generic PCI
pci_set_power_state <-- generic PCI
agp_amdk7_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
amd_irongate_driver.configure <-- device-specific
Convert to generic power management where the PCI bus PM methods do the
generic PCI things, and the driver needs only the device-specific part,
i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_amdk7_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_amdk7_resume # driver->pm->resume
amd_irongate_driver.configure <-- device-specific
Based on 0aeddbd0cb ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Convert agpgart-intel from legacy PCI power management to the generic power
management framework.
Previously agpgart-intel used legacy PCI power management, and
agp_intel_resume() was responsible for both device-specific things and
generic PCI things like saving and restoring config space and managing
power state.
In this case, agp_intel_suspend() was empty, and agp_intel_resume()
already did only device-specific things, so simply convert it to take a
struct device * instead of a struct pci_dev *.
Based on 0aeddbd0cb ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Convert agpgart-efficeon from legacy PCI power management to the generic
power management framework.
Previously agpgart-efficeon used legacy PCI power management, which means
agp_efficeon_suspend() and agp_efficeon_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state.
In this case, agp_efficeon_suspend() was empty, and agp_efficeon_resume()
already did only device-specific things, so simply convert it to take a
struct device * instead of a struct pci_dev *.
Based on 0aeddbd0cb ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
The current maintainers have left Qualcomm and their email addresses were
bouncing. Since I couldn't get hold of them now, I'm volunteering myself
to maintain this driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Link: https://lore.kernel.org/r/20220812060602.7672-4-manivannan.sadhasivam@linaro.org
Stefan Schmidt says:
====================
==
One of the biggest cycles for ieee802154 in a long time. We are landing the
first pieces of a big enhancements in managing PAN's. We might have another pull
request ready for this cycle later on, but I want to get this one out first.
Miquel Raynal added support for sending frames synchronously as a dependency
to handle MLME commands. Also introducing more filtering levels to match with
the needs of a device when scanning or operating as a pan coordinator.
To support development and testing the hwsim driver for ieee802154 was also
enhanced for the new filtering levels and to update the PIB attributes.
Alexander Aring fixed quite a few bugs spotted during reviewing changes. He
also added support for TRAC in the atusb driver to have better failure
handling if the firmware provides the needed information.
Jilin Yuan fixed a comment with a repeated word in it.
==================
Signed-off-by: David S. Miller <davem@davemloft.net>
DTB Overlays (.dtbo) can now be built from source files with the
extension (.dtso). This makes it clear what is the content of the files
and differentiates them from base DTB source files.
Rename the pi433-overlay.dts file to pi433-overlay.dtso and update
the information file pi433.txt for the same.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221024173434.32518-8-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
In drivers/of/unittest-data/:
- Rename .dts overlay source files to use .dtso suffix.
Modify driver/of/unitest.c to use .dtbo.o based symbols instead of .dtb.o
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221024173434.32518-4-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
DTB files can be built into the kernel by converting them to assembly
files then assembling them into object files. We extend this here
for DTB overlays with the .dtso extensions.
We change the start and end delimiting tag prefix to make it clear that
this data came from overlay files.
[Based on patch by Frank Rowand <frank.rowand@sony.com>]
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221024173434.32518-3-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Currently DTB Overlays (.dtbo) are build from source files with the same
extension (.dts) as the base DTs (.dtb). This may become confusing and
even lead to wrong results. For example, a composite DTB (created from a
base DTB and a set of overlays) might have the same name as one of the
overlays that create it.
Different files should be generated from differently named sources.
.dtb <-> .dts
.dtbo <-> .dtso
We do not remove the ability to compile DTBO files from .dts files here,
only add a new rule allowing the .dtso file name. The current .dts named
overlays can be renamed with time. After all have been renamed we can
remove the other rule.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221024173434.32518-2-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.
Fix by matching the name string up to the separating tab character.
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
cfef80bad4 ("perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file")
ee3e88dfec ("perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}")
b4e12b2d70 ("perf: Kill __PERF_SAMPLE_CALLCHAIN_EARLY")
There is a kernel patch pending that renames PERF_MEM_LVLNUM_EXTN_MEM to
PERF_MEM_LVLNUM_CXL, tooling this time is ahead of the kernel :-)
This thus partially addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/lkml/Y1k53KMdzypmU0WS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use str_enable_disable() helper instead of open coding the same.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Commit a4cb3651a1 ("powerpc/64s/interrupt: Fix lost interrupts when
returning to soft-masked context") fixed the problem of pending irqs
being cleared when clearing the HARD_DIS bit, but then it didn't clear
the bit at all. This change clears HARD_DIS without affecting other bits
in the mask.
When an interrupt hits in a soft-masked section that has MSR[EE]=1, it
can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when
returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK
interrupt becoming pending). Failure to clear this leaves the
returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which
confuses irq assertions and could be dangerous for code that might test
the flag.
This was observed in a hash MMU kernel where a kernel hash fault hits in
a local_irqs_disabled region that has EE=1. The hash fault also runs
with EE=1, then as it returns, a decrementer hits in the restart section
and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS
flag, which is not clear when the original context is returned to.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: a4cb3651a1 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221022052207.471328-1-npiggin@gmail.com
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221026122951.331638-1-bigeasy@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 0adccaf1ea ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
defined the sound-dai-cells property as 0. However, rt5682 has two DAIs,
AIF1 and AIF2, and therefore should have sound-dai-cells set to 1. Fix
it.
Fixes: 0adccaf1ea ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221024220015.1759428-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682s codec is a DAI provider with two interfaces - AIF1 and AIF2
- and therefore should have a #sound-dai-cells property that is equal to
1. Add it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221024220015.1759428-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_fw_parse_ext_man() can return negative error numbers which is not
correct for the used size_t type.
Change the return value to ssize_t and use the same type where the function
is called.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 73c091a2fe ("ASoC: SOF: ipc4-loader: Support for loading external libraries")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221025132706.30356-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound-dai is a standard property whose type is already set to
phandle-array by sound-dai.yaml, so there's no need to set it (and
wrongly so for headset-codec) in this binding. What should be set
however is the maximum number of items, which for headset-codec should
be 1.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221024230658.1772907-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It keeps propagating through machine boards, fix it once and for all.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221024190841.31572-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It keeps propagating through machine boards, fix it once and for all.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221024190841.31572-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move most of the DAI probe/remove logic into component ops.
This makes things more consistent because the AIC clock is
now managed solely from the component side. And it makes it
easier to add codec switching support later on.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-10-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the component suspend/resume functions near the definition
of the component driver to emphasize that they're unrelated to
the DAI functions.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-9-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S controller on JZ47xx SoCs doesn't impose restrictions on
sample rate and the driver doesn't make any assumptions about it,
so the DAI should advertise a continuous sample rate range.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-8-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio controller on JZ47xx SoCs can transfer 20- and 24-bit
samples in the FIFO, so allow those formats to be used with the
I2S driver. Although the FIFO doesn't care about the in-memory
sample format, we only support 4-byte format variants because the
DMA controller on these SoCs cannot transfer in 3-byte multiples.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-7-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some purely cosmetic changes: line up all the macro values to
make things easier to read and sort the includes alphabetically.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-6-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get rid of a couple of macros and improve readability by using
FIELD_PREP() and GENMASK() for the sample size setting.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The differences between register fields on different SoC versions
can be abstracted away using the regmap field API. This is easier
to understand and extend than comparisons based on the version ID.
Since the version IDs are unused after this change, remove them at
the same time, and remove unused macros.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-4-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using regmap for accessing the AIC registers makes the driver a
little easier to read, and later refactors can take advantage of
regmap APIs to further simplify the driver.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.
Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.
This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.
Fixes: 967beb2e87 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
readb/writeb are used directly without any wrappers or references to
the BAR, as usually done for other registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just more consistency in the code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the CL prefix is misleading. HDaudio streams are used for
code loading since ApolloLake, but they are also used for regular
audio transfers.
No functionality change, pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not sure why we mixed sof and hdac helpers, this makes the code way
less readable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we always do a full reset, there's no point in checking if
the controller is always out-of-reset. This is always true by
construction.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no point in checking for a full-reset condition that is
always-true in the callers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda_dsp_ctrl_link_reset() already performs a usleep and a check that
GCTL has been modified, there's no point in waiting more.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some settings were never or are no longer used, remove useless
definitions and assignments.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the last usage of substream->runtime->private_data in the
HDAudio BE hw_params.
The SOF core saves the 'sdev' global context as component drvdata, and
we already save the bus information in sdev.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF HDAudio code stores the Host DMA hdac_stream structure in the
FE substream->runtime->private_data. The BE dailink also uses the
substream->runtime->private_data to allocate the link DMA stream tag.
This really works by accident: the DPCM core copies the FE runtime
information in the BE, which has the side-effect of sharing the
FE-specific private_data with the BE.
To avoid more uses of the private_data with potential issues such as
accessing stale information or use-after-free cases, this patch
removes most of the usages of this private_data at the BE level. We
can directly use the existing dma_data to access the relevant
information.
However the hw_params still uses the information, mainly to go back to
the 'bus' structure required for the link dma stream tag
allocation. This is safe in that the 'bus' is not stream or PCM
specific.
The next patch will completely remove this last use of private_data by
using the component_drvdata - which is how SOF passes a global context
around.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
