Add missing helper in SOF toolbox.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These will be used to add more consistency in the SOF core and
drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to expose an indirection when we can use the fallback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Returning an error when a read/write is not implemented makes no
sense, especially on read where no return value makes sense.
Change the logic to directly fallback to mmio. If a platform truly
wants other read/writes that are not plain vanilla mmio, it needs to
implement its own routines.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some delay occurs between each bursts, thus the default delay is wrong
and a timeout will occur with big enough transfers.
The solution is to handle the timeout management in the driver and
add some delay for each bursts in the timeout calculation.
Reported-by: Da Xue <da@libre.computer>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221026-spicc-burst-delay-v1-0-1be5ffb7051a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Nanote UMPC-01 mini laptop has stereo speakers, while the default
bytcht_es8316 settings assume a mono speaker setup. Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221025140942.509066-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a component has a prefix, and uses a SND_SOC_DAPM_REGULATOR_SUPPLY,
the name of the regulator should not use the prefix, otherwise it won't
be properly matched in the DT/ACPI.
Fixes: 3caac75968 ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221025150149.113129-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
It's possible that PCI device can provide an IO port resource for
the device. regmap MMIO currently uses MMIO by default. With an
additional flag we enable support for IO port accesses.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: fixed the strange of_device_id formatting]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This adds a binding for a GPIO multiplexer driver based on latches
connected to other GPIOs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Not all Dekel PHY registers have a lane instance, so having to specify
this when using them is awkward. It makes more sense to define each PHY
register with its full internal PHY offset where bits 15:12 is the lane
for lane-instanced PHY registers and just a register bank index for other
PHY registers. This way lane-instanced registers can be referred to with
the (tc_port, lane) parameters, while other registers just with a tc_port
parameter.
An additional benefit of this change is to prevent passing a Dekel
register to a generic MMIO access function or vice versa.
v2:
- Fix parameter reuse in the DKL_REG_MMIO definition.
v3:
- Rebase on latest patchset version.
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-3-imre.deak@intel.com
Move the TypeC DKL PHY register definitions to intel_dkl_phy_regs.h.
No functional changes.
v2:
- Move the definitions to a new intel_dkl_phy_regs.h file. (Jani).
v3:
- Rebase on latest patchset version.
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-2-imre.deak@intel.com
An upcoming patch moves the DKL PHY register definitions to
intel_dkl_phy_regs.h, so for consistency rename intel_tc_phy_regs.h
containing only MG PHY register definitions to intel_mg_phy_regs.h.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025102644.2123988-3-imre.deak@intel.com
Accessing the TypeC DKL PHY registers during modeset-commit,
-verification, DP link-retraining and AUX power well toggling is racy
due to these code paths being concurrent and the PHY register bank
selection register (HIP_INDEX_REG) being shared between PHY instances
(aka TC ports) and the bank selection being not atomic wrt. the actual
PHY register access.
Add the required locking around each PHY register bank selection->
register access sequence.
Kudos to Ville for noticing the race conditions.
v2:
- Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani)
- Make the DKL_REG_TC_PORT macro independent of PHY internals.
- Move initing the DKL PHY lock to a more logical place.
v3:
- Fix parameter reuse in the DKL_REG_TC_PORT definition.
- Document the usage of phy_lock.
v4:
- Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-1-imre.deak@intel.com
The vfio-ap crypto driver fails to allocate memory for an array of
pointers used to pass supported mdev types to mdev_register_parent().
Since we only support a single mdev type, the fix is to allocate a
single entry in the ap_matrix_dev->mdev_types array.
Link: https://lore.kernel.org/r/20221021145905.15100-1-jjherne@linux.ibm.com
Fixes: da44c340c4 ("vfio/mdev: simplify mdev_type handling")
Cc: stable@vger.kernel.org
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The channel-subsystem-driver scans for newly available devices whenever
device-IDs are removed from the cio_ignore list using a command such as:
echo free >/proc/cio_ignore
Since an I/O device scan might interfer with running I/Os, commit
172da89ed0 ("s390/cio: avoid excessive path-verification requests")
introduced an optimization to exclude online devices from the scan.
The newly added check for online devices incorrectly assumes that
an I/O-subchannel's drvdata points to a struct io_subchannel_private.
For devices that are bound to a non-default I/O subchannel driver, such
as the vfio_ccw driver, this results in an out-of-bounds read access
during each scan.
Fix this by changing the scan logic to rely on a driver-independent
online indication. For this we can use struct subchannel->config.ena,
which is the driver's requested subchannel-enabled state. Since I/Os
can only be started on enabled subchannels, this matches the intent
of the original optimization of not scanning devices where I/O might
be running.
Fixes: 172da89ed0 ("s390/cio: avoid excessive path-verification requests")
Fixes: 0c3812c347 ("s390/cio: derive cdev information only for IO-subchannels")
Cc: <stable@vger.kernel.org> # v5.15
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 838d9bb62d ("perf: Use sample_flags for raw_data")
changed the way the raw data of an event is collected.
Adjust the PMU pai_ext to the new scheme.
Fixes: 838d9bb62d ("perf: Use sample_flags for raw_data")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch enhances the kernel image adding a trailer as required for
secure boot by future firmware versions.
Cc: <stable@vger.kernel.org> # 5.2+
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.
Cc: <stable@vger.kernel.org>
Fixes: f058599e22 ("s390/pci: Fix s390_mmio_read/write with MIO")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.
Cc: <stable@vger.kernel.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entries.
Cc: <stable@vger.kernel.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rename structure member users to active_events to make it consistent
with PMU pai_ext. Also use the same prefix syntax for increment and
decrement operators in both PMUs.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rework the mapped buffer reference count in PMU pai_crypto
to match the same technique as in PMU pai_ext.
This simplifies the logic.
Do not count the individual number of counter and sampling
processes. Remember the type of access and the total number of
references to the buffer.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move enum definition to header file. This is done in preparation
for a follow on patch where this enum will be used in another source
file.
Also change the enum name from paiext_mode to paievt_mode
to indicate this enum is now used for several events.
Make naming consistent and rename PAI_MODE_COUNTER to PAI_MODE_COUNTING.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Adjust white space according to coding guidelines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Using z/VM the 3270 terminal emulator also emulates an IBM 3215 console
which outputs line by line. When the screen is full, the console enters
the MORE... state and waits for the operator to confirm the data
on the screen by pressing a clear key. If this does not happen in the
default time frame (currently 50 seconds) the console enters the HOLDING
state.
It then waits another time frame (currently 10 seconds) before the output
continues on the next screen. When the operator presses the clear key
during these wait times, the output continues immediately.
This may lead to a very long boot time when the console
has to print many messages, also the system may hang because of the
console's limited buffer space and the system waits for the console
output to drain and finally to finish. This problem can only occur
when a terminal emulator is actually connected to the 3215 console
driver. If not z/VM simply drops console output.
Remedy this rare situation and add a kernel boot command line parameter
con3215_drop. It can be set to 0 (do not drop) or 1 (do drop) which is
the default. This instructs the kernel drop console data when the
console buffer is full. This speeds up the boot time considerable and
also does not hang the system anymore.
Add a sysfs attribute file for console IBM 3215 named con_drop.
This allows for changing the behavior after the boot, for example when
during interactive debugging a panic/crash is expected.
Here is a test of the new behavior using the following test program:
#/bin/bash
declare -i cnt=4
mode=$(cat /sys/bus/ccw/drivers/3215/con_drop)
[ $mode = yes ] && cnt=25
echo "cons_drop $(cat /sys/bus/ccw/drivers/3215/con_drop)"
echo "vmcp term more 5 2"
vmcp term more 5 2
echo "Run $cnt iterations of "'echo t > /proc/sysrq-trigger'
for i in $(seq $cnt)
do
echo "$i. command 'echo t > /proc/sysrq-trigger' at $(date +%F,%T)"
echo t > /proc/sysrq-trigger
sleep 1
done
echo "droptest done" > /dev/kmsg
#
Output with sysfs attribute con_drop set to 1:
# ./droptest.sh
cons_drop yes
vmcp term more 5 2
Run 25 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:09
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:10
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:11
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:12
5. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:13
6. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:14
7. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:15
8. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:16
9. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:17
10. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:18
11. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:19
12. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:20
13. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:21
14. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:22
15. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:23
16. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:24
17. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:25
18. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:26
19. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:27
20. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:28
21. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:29
22. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:30
23. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:31
24. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:32
25. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:33
#
There are no hangs anymore.
Output with sysfs attribute con_drop set to 0 and identical
setting for z/VM console 'term more 5 2'. Sometimes hitting the
clear key at the x3270 console to progress output.
# ./droptest.sh
cons_drop no
vmcp term more 5 2
Run 4 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:20:58
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:24:32
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:28:04
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:31:37
#
Details:
Enable function raw3215_write() to handle tab expansion and newlines
and feed it with input not larger than the console buffer of 65536
bytes. Function raw3125_putchar() just forwards its character for
output to raw3215_write().
This moves tab to blank conversion to one function raw3215_write()
which also does call raw3215_make_room() to wait for enough free
buffer space.
Function handle_write() loops over all its input and segments input
into chunks of console buffer size (should the input be larger).
Rework tab expansion handling logic to avoid code duplication.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The functions con3215_write() and tty3215_write() have nearly
identical function bodies and a slightly different function prototype.
Create function handle_write() to handle the common function
body and maintain the function prototypes.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Marc Kleine-Budde says:
====================
this is a pull request of 29 patches for net-next/master.
The first patch is by Daniel S. Trevitz and adds documentation for
switchable termination resistors.
Zhang Changzhong's patch fixes a debug output in the j13939 stack.
Oliver Hartkopp finally removes the pch_can driver, which is
superseded by the generic c_can driver.
Gustavo A. R. Silva replaces a zero-length array with
DECLARE_FLEX_ARRAY() in the ucan driver.
Kees Cook's patch removes a no longer needed silencing of
"-Warray-bounds" warnings for the kvaser_usb driver.
The next 2 patches target the m_can driver. The first is by me cleans
up the LEC error handling, the second is by Vivek Yadav and extends
the LEC error handling to the data phase of CAN-FD frames.
The next 9 patches all target the gs_usb driver. The first 5 patches
are by me and improve the Kconfig prompt and help text, set
netdev->dev_id to distinguish multi CAN channel devices, allow
loopback and listen only at the same time, and clean up the
gs_can_open() function a bit. The remaining 4 patches are by Jeroen
Hofstee and add support for 2 new features: Bus Error Reporting and
Get State.
Jimmy Assarsson and Anssi Hannula contribute 10 patches for the
kvaser_usb driver. They first add Listen Only and Bus Error Reporting
support, handle CMD_ERROR_EVENT errors, improve CAN state handling,
restart events, and configuration of the bit timing parameters.
Another patch by me which fixes the indention in the m_can driver.
A patch by Dongliang Mu cleans up the ucan_disconnect() function in
the ucan driver.
The last patch by Biju Das is for the rcan_canfd driver and cleans up
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The "random rhlist add/delete operations" actually wasn't very random, as all
cases tested the same bit. Since the later parts of this loop depend on the
first case execute this unconditionally, and then test on different bits for the
remaining tests. While at it only request as much random bits as are actually
used.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
pin_guest_page() used page_to_virt() to calculate the hpa of the pinned
page. This currently works, because virtual and physical addresses are
the same. Use page_to_phys() instead to resolve the virtual-real address
confusion.
One caller of pin_guest_page() actually expected the hpa to be a hva, so
add the missing phys_to_virt() conversion here.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025082039.117372-2-nrb@linux.ibm.com
Message-Id: <20221025082039.117372-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
All callers of the sida_origin() macro actually expected a virtual
address, so rename it to sida_addr() and hand out a virtual address.
At some places, the macro wasn't used, potentially creating problems
if the sida size ever becomes nonzero (not currently the case), so let's
start using it everywhere now while at it.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221020143159.294605-5-nrb@linux.ibm.com
Message-Id: <20221020143159.294605-5-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the
same).
sie_block is accessed in entry.S and passed it to hardware, which is why
both its physical and virtual address are needed. To avoid every caller
having to do the virtual-physical conversion, add a new function sie64a()
which converts the virtual address to physical.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221020143159.294605-3-nrb@linux.ibm.com
Message-Id: <20221020143159.294605-3-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
This reverts commit 19905240ae.
It was a new feature, and it doesn't even work properly yet, so revert
it from this branch as it is not needed for 6.1-final.
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@kernel.org>
Fixes: 19905240ae ("usb: gadget: uvc: limit isoc_sg to super speed gadgets")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define a common COMMUNITY macro and supply a variant to it.
This removes some verbosity in macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Define a common COMMUNITY macro and supply a variant to it.
This removes some verbosity in macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Define a common COMMUNITY macro and supply a variant to it.
This removes some verbosity in macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Define a common COMMUNITY macro and supply a variant to it.
This removes some verbosity in macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Define a common COMMUNITY macro and supply a variant to it.
This removes some verbosity in macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the Asus Vivobook K3402ZA/K3502ZA/S5402ZA Asus Vivobook S5602ZA
has an ACPI DSDT table the describes IRQ 1 as ActiveLow while the kernel
overrides it to Edge_High. This prevents the keyboard on this laptop
from working. To fix this add this laptop to the skip_override_table so
that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216579
Tested-by: Dzmitry <wrkedm@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.
Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.
Fixes: a3381e3a65 ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix typo pll5_mux_dsi_div_params -> mux_dsi_div_params
Fixes the below warning (make W=1):
drivers/clk/renesas/rzg2l-cpg.c:115: warning: Function parameter or member 'mux_dsi_div_params' not described in 'rzg2l_cpg_priv'
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221026012123.159790-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
