Since we now have the extra step from hw.(de)gamma_lut into
{pre,post}_csc_lut let's make sure we didn't forget to assign
them appropriately. Ie. basically making sure intel_color_check()
was called when necessary (and that it did its job suitable well).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-4-ville.syrjala@linux.intel.com
Add an extra remapping step between the logical state of the LUTs
(hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs.
the actual state of the LUTs programmed into the hardware.
With this we should be finally able finish the (de)gamma
readout/state checker support for the remaining platforms
(ilk-skl) where the same hardware LUT can be positioned
either before or after the pipe CSC unit. Where we position
it depends on factors such as presence of the logical degamma
LUT, RGB vs. YCbCr output, full vs. limited RGB quantization
range.
Without the extra remapping step the state readout doesn't
really know whether the LUT read from the hardware is the
degamma or gamma LUT, and so we is unable to accurately store
it into our crtc state. With the remapping step we know
exactly where to put it given the order of the LUT vs. CSC
in the hardware state.
Only the initial hw->uapi state readout done during driver
load/resume still has the problem of not really knowing
what to do with the LUT(s). But we can just assume 1:1
mapping there and let subsequent commits fix things up.
Another benefit is that we now have a place for purely
internal LUTs, without complicating the bigjoiner uapi->hw
copy logic. This should prove useful for streamlining
glk degamma LUT handling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-3-ville.syrjala@linux.intel.com
Make ilk_load_luts() ready for a degamma lut. Currently we never
have one, but soon we may get one from readout, and I think we
may want to change the state computation such that we may end up
with one even when userspace has simply supplied a gamma lut.
At least the code now follows the path laid out by the ivb/bdw
counterpars.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-2-ville.syrjala@linux.intel.com
The err variable was the same like retval, but capped to <= 0. This is the
same as retval as elf_read() never returns positive values.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/4137126.7Qn9TF0dmF@mobilepool36.emlix.com
This function has never returned anything but a plain NULL.
Fixes: 6a8d38945c ("binfmt_elf: Hoist ELF program header loading to a function")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2359389.EDbqzprbEW@mobilepool36.emlix.com
I had a hard time trying to understand completely why it is using vm_end in
one side of the expression and vm_start in the other one, and using
something in the "if" clause that is not an exact copy of what is used
below. The whole point is that the stack_size variable that was used in the
"if" clause is the difference between vm_start and vm_end, which is not far
away but makes this thing harder to read than it must be.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2017429.gqNitNVd0C@mobilepool36.emlix.com
When searching for a struct definition I often enough end up simply doing
git grep 'struct foobar {'
Sadly some of the ELF structs did not follow the usual coding style so they
were invisible.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/11563980.Ss37MnutNL@mobilepool36.emlix.com
* check that a child process is in parent's time namespace after vfork.
* check that a child process is in the target namespace after exec.
Output on success:
1..4
ok 1 parent before vfork
ok 2 child after exec
ok 3 wait for child
ok 4 parent after vfork
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221013173154.291597-1-avagin@google.com
Changing a time namespace requires remapping a vvar page, so we don't want
to allow doing that if any other tasks can use the same mm.
Currently, we install a time namespace when a task is created with a new
vm. exec() is another case when a task gets a new mm and so it can switch
a time namespace safely, but it isn't handled now.
One more issue of the current interface is that clone() with CLONE_VM isn't
allowed if the current task has unshared a time namespace
(timens_for_children doesn't match the current timens).
Both these issues make some inconvenience for users. For example, Alexey
and Florian reported that posix_spawn() uses vfork+exec and this pattern
doesn't work with time namespaces due to the both described issues.
LXC needed to workaround the exec() issue by calling setns.
In the commit 133e2d3e81 ("fs/exec: allow to unshare a time namespace on
vfork+exec"), we tried to fix these issues with minimal impact on UAPI. But
it adds extra complexity and some undesirable side effects. Eric suggested
fixing the issues properly because here are all the reasons to suppose that
there are no users that depend on the old behavior.
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Origin-author: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220921003120.209637-1-avagin@google.com
Convert test exclusion into test skipping. This brings the logic for
why a test is being skipped into the test itself, instead of having to
spread ifdefs around the code. This will make cleanup easier as minimum
tests get raised. Drop __maybe_unused so missed tests will be noticed
again and clean up whitespace.
For example, clang-11 on i386:
[15:52:32] ================== overflow (18 subtests) ==================
[15:52:32] [PASSED] u8_u8__u8_overflow_test
[15:52:32] [PASSED] s8_s8__s8_overflow_test
[15:52:32] [PASSED] u16_u16__u16_overflow_test
[15:52:32] [PASSED] s16_s16__s16_overflow_test
[15:52:32] [PASSED] u32_u32__u32_overflow_test
[15:52:32] [PASSED] s32_s32__s32_overflow_test
[15:52:32] [SKIPPED] u64_u64__u64_overflow_test
[15:52:32] [SKIPPED] s64_s64__s64_overflow_test
[15:52:32] [SKIPPED] u32_u32__int_overflow_test
[15:52:32] [PASSED] u32_u32__u8_overflow_test
[15:52:32] [PASSED] u8_u8__int_overflow_test
[15:52:32] [PASSED] int_int__u8_overflow_test
[15:52:32] [PASSED] shift_sane_test
[15:52:32] [PASSED] shift_overflow_test
[15:52:32] [PASSED] shift_truncate_test
[15:52:32] [PASSED] shift_nonsense_test
[15:52:32] [PASSED] overflow_allocation_test
[15:52:32] [PASSED] overflow_size_helpers_test
[15:52:32] ==================== [PASSED] overflow =====================
[15:52:32] ============================================================
[15:52:32] Testing complete. Ran 18 tests: passed: 15, skipped: 3
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20221006230017.1833458-1-keescook@chromium.org
Building the overflow kunit tests with clang-11 fails with:
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options LLVM=1 \
overflow
...
ld.lld: error: undefined symbol: __mulodi4
...
Clang 11 and earlier generate unwanted libcalls for signed output,
unsigned input.
Disable these tests for now, but should these become used in the kernel
we might consider that as justification for dropping clang-11 support.
Keep the clang-11 build alive a little bit longer.
Avoid -Wunused-function warnings via __maybe_unused. To test W=1:
$ make LLVM=1 -j128 defconfig
$ ./scripts/config -e KUNIT -e KUNIT_ALL
$ make LLVM=1 -j128 olddefconfig lib/overflow_kunit.o W=1
Link: https://github.com/ClangBuiltLinux/linux/issues/1711
Link: 3203143f13
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221006171751.3444575-1-ndesaulniers@google.com
Fix the kern-doc markings for several of the overflow helpers and move
their location into the core kernel API documentation, where it belongs
(it's not driver-specific).
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
To pick the changes from:
257449c6a5 ("x86/cpufeatures: Add LbrExtV2 feature bit")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y1g6vGPqPhOrXoaN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
825cf206ed ("statx: add direct I/O alignment information")
That add a constant that was manually added to tools/perf/trace/beauty/statx.c,
at some point this should move to the shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h'
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Eric Biggers <ebiggers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Y1gGQL5LonnuzeYd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
69ab6f5b00 ("ALSA: Remove some left-over license text in include/uapi/sound/")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
65b32f801b ("uapi: move IPPROTO_L2TP to in.h")
5854a09b49 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
That ends up automatically adding the new IPPROTO_L2TP to the socket
args beautifiers:
$ tools/perf/trace/beauty/socket.sh > before
$ cp include/uapi/linux/in.h tools/include/uapi/linux/in.h
$ tools/perf/trace/beauty/socket.sh > after
$ diff -u before after
--- before 2022-10-25 12:17:02.577892416 -0300
+++ after 2022-10-25 12:17:10.806113033 -0300
@@ -20,6 +20,7 @@
[98] = "ENCAP",
[103] = "PIM",
[108] = "COMP",
+ [115] = "L2TP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
$
Now 'perf trace' will decode that 115 into "L2TP" and it will also be
possible to use it in tracepoint filter expressions.
Addresses this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Wojciech Drewek <wojciech.drewek@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/Y1f%2FGe6vjQrGjYiK@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We also need to add SYM_TYPED_FUNC_START() to util/include/linux/linkage.h
and update tools/perf/check_headers.sh to ignore the include cfi_types.h
line when checking if the kernel original files drifted from the copies
we carry.
This is to get the changes from:
ccace936ee ("x86: Add types to indirectly called assembly functions")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/lkml/Y1f3VRIec9EBgX6F@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
0e5d5ae837 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
https://lore.kernel.org/lkml/Y1fy5GD7ZYvkeufv@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The virtual LBR test uses a python script to check the max size of
branch stack in the Intel-PT generated LBR. But it didn't check whether
python scripting is available (as it's optional).
Let's skip the test if the python support is not available.
Fixes: f77811a0f6 ("perf test: test_intel_pt.sh: Add 9 tests")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ammy Yi <ammy.yi@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221021181055.60183-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit e0b23af82d ("perf list: Add PMU pai_crypto event
description for IBM z16") introduced the "Processor Activity
Instrumentation" for cryptographic counters for z16. The PMU device
driver exports the counters via sysfs files listed in directory
/sys/devices/pai_crypto.
To specify an event from that PMU, use 'perf stat -e pai_crypto/XXX/'.
However the JSON file mentioned in above commit exports the counter
decriptions in file pmu-events/arch/s390/cf_z16/pai.json. Rename this
file to pmu-events/arch/s390/cf_z16/pai_crypto.json to make the naming
consistent.
Now 'perf list' shows the counter names under pai_crypto section:
pai_crypto:
CRYPTO_ALL
[CRYPTO ALL. Unit: pai_crypto]
...
Output before was
pai:
CRYPTO_ALL
[CRYPTO ALL. Unit: pai_crypto]
...
Fixes: e0b23af82d ("perf list: Add PMU pai_crypto event description for IBM z16")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221021082557.2695382-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The write call may set errno which is problematic if occurring in a
function also setting errno. Save and restore errno around the write
call.
done_fd may be used after close, clear it as part of the close and check
its validity in the signal handler.
Suggested-by: <gthelen@google.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024011024.462518-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During the transition to libbpf 1.0 some functions that perf used were
deprecated and finally removed from libbpf, so bpf_program__set_insns()
was introduced for perf to continue to use its bpf loader.
But when build with LIBBPF_DYNAMIC=1 we now need to check if that
function is available so that perf can build with older libbpf versions,
even if the end result is emitting a warning to the user that the use
of the perf BPF loader requires a newer libbpf, since bpf_program__set_insns()
touches libbpf objects internal state.
This affects only 'perf trace' when using bpf C code or pre-compiled
bytecode as an event.
Noticed on RHEL9, that has libbpf 0.7.0, where bpf_program__set_insns()
isn't available.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf_load_program() prototype appeared in tools/lib/bpf/bpf.h as
deprecated, but nowadays its completely removed, so add it back for
building with the system libbpf when using 'make LIBBPF_DYNAMIC=1'.
This is a stop gap hack till we do like tools/bpf does with bpftool,
i.e. bootstrap the libbpf build and install it in the perf build
directory when not using 'make LIBBPF_DYNAMIC=1'.
That has to be done to all libraries in tools/lib/, so tha we can
remove -Itools/lib/ from the tools/perf CFLAGS.
Noticed when building with LIBBPF_DYNAMIC=1 and libbpf 0.7.0 on RHEL9.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat_all_metrics.sh fails in powerpc:
90: perf all metrics test : FAILED!
The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list. It runs perf metric events with
various commands and expects non-empty metric result.
Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.
Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.
Result in powerpc box after this patch changes:
90: perf all metrics test : Ok
Fixes: a3cbcadfdf ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build assumes documentation files starting with "perf-" are man
pages but perf-arm-coresight.txt is not a man page:
asciidoc: ERROR: perf-arm-coresight.txt: line 2: malformed manpage title
asciidoc: ERROR: perf-arm-coresight.txt: line 3: name section expected
asciidoc: FAILED: perf-arm-coresight.txt: line 3: section title expected
make[3]: *** [Makefile:266: perf-arm-coresight.xml] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile.perf:895: man] Error 2
Fix by renaming it.
Fixes: dc2e0fb00b ("perf test coresight: Add relevant documentation about ARM64 CoreSight testing")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: coresight@lists.linaro.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/a176a3e1-6ddc-bb63-e41c-15cda8c2d5d2@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in these csets:
e237506238 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
That doesn't cause any changes in the perf tools.
As a reminder, this table is used in tools perf to allow features such as:
[root@five ~]# perf trace -e set_mempolicy_home_node
^C[root@five ~]#
[root@five ~]# perf trace -v -e set_mempolicy_home_node
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253729 && common_pid != 3585) && (id == 450)
mmap size 528384B
^C[root@five ~]
[root@five ~]# perf trace -v -e set* --max-events 5
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253734 && common_pid != 3585) && (id == 38 || id == 54 || id == 105 || id == 106 || id == 109 || id == 112 || id == 113 || id == 114 || id == 116 || id == 117 || id == 119 || id == 122 || id == 123 || id == 141 || id == 160 || id == 164 || id == 170 || id == 171 || id == 188 || id == 205 || id == 218 || id == 238 || id == 273 || id == 308 || id == 450)
mmap size 528384B
0.000 ( 0.008 ms): bash/253735 setpgid(pid: 253735 (bash), pgid: 253735 (bash)) = 0
6849.011 ( 0.008 ms): bash/16046 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
6849.080 ( 0.005 ms): bash/253736 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
7437.718 ( 0.009 ms): gnome-shell/253737 set_robust_list(head: 0x7f34b527e920, len: 24) = 0
13445.986 ( 0.010 ms): bash/16046 setpgid(pid: 253738 (bash), pgid: 253738 (bash)) = 0
[root@five ~]#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w set_mempolicy_home_node
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/s390/entry/syscalls/syscall.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
$
$ grep -w set_mempolicy_home_node /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
[450] = "set_mempolicy_home_node",
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/lkml/Y01HN2DGkWz8tC%2FJ@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Document which functions do not modify the queue limits.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-3-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c75e707fe1 ("block: remove the per-bio/request write hint")
removed all code that uses the struct request write_hint member. Hence
also remove 'write_hint' itself.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-2-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The first argument of WARN() is a condition, so this will use "addr"
as the format string and possibly crash.
Fixes: 3b6c1747da ("x86/retpoline: Add SKL retthunk retpolines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/Y1gBoUZrRK5N%2FlCB@kili/
A small set of assorted fixes and hardware-id additions for 6.1.
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix missing native backlight on Chromebooks
asus-wmi:
- Add support for ROG X16 tablet mode
leds:
- simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd:
- pmc: Read SMU version during suspend on Cezanne systems
platform/x86/intel:
- pmc/core: Add Raptor Lake support to pmc core driver
thinkpad_acpi:
- Fix reporting a non present second fan on some models
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmNXsBcUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yvuwf6AgDXF0iVKlJWUx0OXwK54SQuGF7h
Ae+9B1la3BTKJd6p9lXon5UKOhnnsUMv+Y+ZBsWZ6Al4VYASf6ZnsXKAiV7WLrUk
rlqmZPodgdLSFmnff/knZ/8VbUFhgCkR82GVm47fRxynqPMkHjA6e8crLO4hmKZp
6OhA475bB+ZK8IfGp9OuwzA+I+V0NTF8k52vCZfycF2Csga8AZmiLqbVHUIvXxjt
lpQJb+9b00WZ/uVbGeZpDHM5RJULnvJLKVHDApXlbTVFQ0fSxIh8nsk12qFIF80d
CxRtDEv629AaybWVtRl9GRK5TkZ1W8W5WcDP8Azf0GMj5H+ckxXK9gIeBQ==
=v6EI
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The only thing which stands out is a fix for a backlight regression on
Chromebooks (under drivers/acpi, with ack from Rafael).
Other then that nothing special to report just various small fixes and
hardware-id additions"
* tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix missing native backlight on Chromebooks
platform/x86/intel: pmc/core: Add Raptor Lake support to pmc core driver
leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd: pmc: Read SMU version during suspend on Cezanne systems
platform/x86: thinkpad_acpi: Fix reporting a non present second fan on some models
platform/x86: asus-wmi: Add support for ROG X16 tablet mode
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The returned value on success is an index of the matching string,
starting from 0. Reflect this in the documentation.
Fixes: 3f5c8d3187 ("device property: Add fwnode_property_match_string()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.
If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.
So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.
Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.
This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)
Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3. Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.
As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.
In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers. The following controllers are known to be xHC 1.2 and
dropped explicitly:
* AMD Yellow Carp
* Intel Alder Lake
* Intel Meteor Lake
* Intel Raptor Lake
[keep PCI ID for Alder Lake PCH for recently added quirk -Mathias]
Cc: stable@vger.kernel.org
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.
This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.
A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ec ("xhci: turn off port power in shutdown")
but it caused regression.
Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This appears to fix the error:
"xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.
ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0
Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3
Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit introduces another bug.
Cc: stable@vger.kernel.org
Fixes: c6ad7fd166 ("f2fs: fix to do sanity check on summary info")
Signed-off-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Removal of multiple unnecessary blank lines in accordance with the
Linux kernel coding-style regulations. Said issues ware detected on
this file by the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Link: https://lore.kernel.org/r/20221025104402.xvbfobi7sdnwlqs2@plymouth
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove/add tabs in block statements in rtl8723bs/core to fix checkpatch
warnings for suspect code indent for conditionals.
Signed-off-by: Emily Peri <eperi1024@gmail.com>
Link: https://lore.kernel.org/r/Y1cH7br3mMcT4Dm5@marshmallow
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed a blank line before a closing brace as it is not necessary
as per the Linux coding-style regulations. The issue was flagged by
the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/234a3e8d21080ae2a1f75127a5c1a0ed131db924.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed several lines that end with an open parenthesis to not end
with it anymore, as per the Linux kernel coding-style regulations.
The issues were flagged by the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/a8e67d281b4e9ab1254e0b58294f566994ac7d9d.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added multiple spaces around operators which needs it as per the
Linux kernel coding-style regulations. The issues were flagged by
the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b8bf422436ff4b2d9b530c61ebf814582ab8836a.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
