Aligned multiple statements to match the open parenthesis on the
line before it as per the Linux kernel coding-style regulations.
The issues were flagged by the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b9a984cf481018a8ef61e4a579cb307eaf1bdc56.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple blank lines are condensed into a single blank line as per
the Linux kernel coding-style regulations. The issues were flagged
by the checkpatch script.
Signed-off-by: Aaron Lawrence <t4rmin@zohomail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/a3e044ff9e5b198af15ebc8b91fd048743881340.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bCardDisableWOHSM in struct adapter is only written but never read.
It can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221023170808.46233-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only caller of _issue_probereq_p2p sets wait_ack = false. Remove the
wait_ack parameter and the code that would run only if wait_ack == true.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221023170808.46233-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NetworkTypeInUse from struct wlan_bssid_ex is not used. Remove
NetworkTypeInUse itself, the code to set it and the enum for its
possible values.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221023170808.46233-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcmd_obj was allocated with kzalloc, its memory is filled with 0s.
There's no need to set rsp and rspsz to NULL or 0 again.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221023170808.46233-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr to check for a multicast address instead of
reimplementing this check in the driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221023170808.46233-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the go2asoc variable in OnAuthClient and call start_clnt_assoc
directly. This makes the code a tiny bit shorter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we go into this else branch, go2asoc is 0. We can continue to the end
of the function. The final if condition will be false.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a return statement at the end of a function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an else branch in OnAuthClient that is not needed.
If we go into the else branch, go2asoc is 0. We can simply continue and
the last if condition will be false.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a label on OnAuthClient that just calls return. We can return
directly instead of jumping to this label.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-14-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mlme handlers that are called from mgt_dispatcher return an error
code. mgt_dispatcher doesn't check this error code, we can remove it and
change the handler functions to void.
For now, make only the minimum changes to the handlers for removing the
error codes. If handlers can be simplified, that'll be done it separate
patches.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnAuth is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnAction is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnDeAuth is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnAuthClient is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnDisassoc is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnBeacon is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnProbeRsp is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnProbeReq is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnAssocRsp is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OnAssocReq is used only in rtw_mlme_ext.c. Make this function static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move some code around in rtw_mlme_ext.c to make it simpler.
mlme_sta_tbl is used only by mgt_dispatcher. Move the table inside the
function. Move mgt_dispatcher behind the handler functions. We can then
make the handler functions static.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221024081417.66441-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa says:
====================
hi,
Martynas reported kprobe _multi link does not resolve symbols
from kernel modules, which attach by address works.
In addition while fixing that I realized we do not take module
reference if the module has kprobe_multi link on top of it and
can be removed.
There's mo crash related to this, it will silently disappear from
ftrace tables, while kprobe_multi link stays up with no data.
This patchset has fixes for both issues.
v3 changes:
- reorder fields in struct bpf_kprobe_multi_link [Andrii]
- added ack [Andrii]
v2 changes:
- added acks (Song)
- added comment to kallsyms_callback (Song)
- change module_callback realloc logic (Andrii)
- get rid of macros in tests (Andrii)
thanks,
jirka
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding kprobe_multi kmod attach api tests that attach bpf_testmod
functions via bpf_program__attach_kprobe_multi_opts.
Running it as serial test, because we don't want other tests to
reload bpf_testmod while it's running.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that makes sure the kernel module won't be removed
if there's kprobe multi link defined on top of it.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding 3 bpf_testmod_fentry_* functions to have a way to test
kprobe multi link on kernel module. They follow bpf_fentry_test*
functions prototypes/code.
Adding equivalent functions to all bpf_fentry_test* does not
seems necessary at the moment, could be added later.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding load_kallsyms_refresh function to re-read symbols from
/proc/kallsyms file.
This will be needed to get proper functions addresses from
bpf_testmod.ko module, which is loaded/unloaded several times
during the tests run, so symbols might be already old when
we need to use them.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently we allow to create kprobe multi link on function from kernel
module, but we don't take the module reference to ensure it's not
unloaded while we are tracing it.
The multi kprobe link is based on fprobe/ftrace layer which takes
different approach and releases ftrace hooks when module is unloaded
even if there's tracer registered on top of it.
Adding code that gathers all the related modules for the link and takes
their references before it's attached. All kernel module references are
released after link is unregistered.
Note that we do it the same way already for trampoline probes
(but for single address).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Renaming __bpf_kprobe_multi_cookie_cmp to bpf_kprobe_multi_addrs_cmp,
because it's more suitable to current and upcoming code.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently ftrace_lookup_symbols iterates only over core symbols,
adding module_kallsyms_on_each_symbol call to check on modules
symbols as well.
Also removing 'args.found == args.cnt' condition, because it's
already checked in kallsyms_callback function.
Also removing 'err < 0' check, because both *kallsyms_on_each_symbol
functions do not return error.
Reported-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Making module_kallsyms_on_each_symbol generally available, so it
can be used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS and CONFIG_MODULES
options are defined).
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221025134148.3300700-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This error triggers on some architectures with unsigned `char` types:
drivers/staging/rtl8192e/rtllib_softmac_wx.c:459 rtllib_wx_set_essid() warn: impossible condition '(extra[i] < 0) => (0-255 < 0)'
But actually, the entire test is bogus, as ssids don't have any sign
validity rules like that. So just remove this check look all together.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20221025122150.583617-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
drivers/misc/sgi-gru/grumain.c:711 gru_check_chiplet_assignment() warn: 'gts->ts_user_chiplet_id' is unsigned
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20221025025223.573543-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Monnet says:
====================
To disassemble instructions for JIT-ed programs, bpftool has relied on the
libbfd library. This has been problematic in the past: libbfd's interface
is not meant to be stable and has changed several times, hence the
detection of the two related features from the Makefile
(disassembler-four-args and disassembler-init-styled). When it comes to
shipping bpftool, this has also caused issues with several distribution
maintainers unwilling to support the feature (for example, Debian's page
for binutils-dev, libbfd's package, says: "Note that building Debian
packages which depend on the shared libbfd is Not Allowed.").
This patchset adds support for LLVM as the primary library for
disassembling instructions for JIT-ed programs.
We keep libbfd as a fallback. One reason for this is that currently it
works well, we have all we need in terms of features detection in the
Makefile, so it provides a fallback for disassembling JIT-ed programs if
libbfd is installed but LLVM is not. The other reason is that libbfd
supports nfp instruction for Netronome's SmartNICs and can be used to
disassemble offloaded programs, something that LLVM cannot do (Niklas
confirmed that the feature is still in use). However, if libbfd's interface
breaks again in the future, we might reconsider keeping support for it.
v4:
- Rebase to address a conflict with commit 2c76238ead ("bpftool: Add
"bootstrap" feature to version output").
v3:
- Extend commit description (patch 6) with notes on llvm-dev and LLVM's
disassembler stability.
v2:
- Pass callback when creating the LLVM disassembler, so that the
branch targets are printed as addresses (instead of byte offsets).
- Add last commit to "support" other arch with LLVM, although we don't
know any supported triple yet.
- Use $(LLVM_CONFIG) instead of llvm-config in Makefile.
- Pass components to llvm-config --libs to limit the number of
libraries to pass on the command line, in Makefile.
- Rebase split of FEATURE_TESTS and FEATURE_DISPLAY in Makefile.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to "libbfd", add a "llvm" feature to the output of command
"bpftool version" to indicate that LLVM is used for disassembling JIT-ed
programs. This feature is mutually exclusive (from Makefile definitions)
with "libbfd".
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221025150329.97371-9-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For offloaded BPF programs, instead of failing to create the
LLVM disassembler without even looking for a triple at all, do run the
function that attempts to retrieve a valid architecture name for the
device.
It will still fail for the LLVM disassembler, because currently we have
no valid triple to return (NFP disassembly is not supported by LLVM).
But failing in that function is more logical than to assume in
jit_disasm.c that passing an "arch" name is simply not supported.
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221025150329.97371-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To disassemble instructions for JIT-ed programs, bpftool has relied on
the libbfd library. This has been problematic in the past: libbfd's
interface is not meant to be stable and has changed several times. For
building bpftool, we have to detect how the libbfd version on the system
behaves, which is why we have to handle features disassembler-four-args
and disassembler-init-styled in the Makefile. When it comes to shipping
bpftool, this has also caused issues with several distribution
maintainers unwilling to support the feature (see for example Debian's
page for binutils-dev, which ships libbfd: "Note that building Debian
packages which depend on the shared libbfd is Not Allowed." [0]).
For these reasons, we add support for LLVM as an alternative to libbfd
for disassembling instructions of JIT-ed programs. Thanks to the
preparation work in the previous commits, it's easy to add the library
by passing the relevant compilation options in the Makefile, and by
adding the functions for setting up the LLVM disassembler in file
jit_disasm.c.
The LLVM disassembler requires the LLVM development package (usually
llvm-dev or llvm-devel).
The expectation is that the interface for this disassembler will be more
stable. There is a note in LLVM's Developer Policy [1] stating that the
stability for the C API is "best effort" and not guaranteed, but at
least there is some effort to keep compatibility when possible (which
hasn't really been the case for libbfd so far). Furthermore, the Debian
page for the related LLVM package does not caution against linking to
the lib, as binutils-dev page does.
Naturally, the display of disassembled instructions comes with a few
minor differences. Here is a sample output with libbfd (already
supported before this patch):
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: push %rbx
c: push %r13
e: push %r14
10: mov %rdi,%rbx
13: movzwq 0xb4(%rbx),%r13
1b: xor %r14d,%r14d
1e: or $0x2,%r14d
22: mov $0x1,%eax
27: cmp $0x2,%r14
2b: jne 0x000000000000002f
2d: xor %eax,%eax
2f: pop %r14
31: pop %r13
33: pop %rbx
34: leave
35: ret
LLVM supports several variants that we could set when initialising the
disassembler, for example with:
LLVMSetDisasmOptions(*ctx,
LLVMDisassembler_Option_AsmPrinterVariant);
but the default printer is used for now. Here is the output with LLVM:
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: pushq %r13
e: pushq %r14
10: movq %rdi, %rbx
13: movzwq 180(%rbx), %r13
1b: xorl %r14d, %r14d
1e: orl $2, %r14d
22: movl $1, %eax
27: cmpq $2, %r14
2b: jne 0x2f
2d: xorl %eax, %eax
2f: popq %r14
31: popq %r13
33: popq %rbx
34: leave
35: retq
The LLVM disassembler comes as the default choice, with libbfd as a
fall-back.
Of course, we could replace libbfd entirely and avoid supporting two
different libraries. One reason for keeping libbfd is that, right now,
it works well, we have all we need in terms of features detection in the
Makefile, so it provides a fallback for disassembling JIT-ed programs if
libbfd is installed but LLVM is not. The other motivation is that libbfd
supports nfp instruction for Netronome's SmartNICs and can be used to
disassemble offloaded programs, something that LLVM cannot do. If
libbfd's interface breaks again in the future, we might reconsider
keeping support for it.
[0] https://packages.debian.org/buster/binutils-dev
[1] https://llvm.org/docs/DeveloperPolicy.html#c-api-changes
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221025150329.97371-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor disasm_print_insn() to extract the code specific to libbfd and
move it to dedicated functions. There is no functional change. This is
in preparation for supporting an alternative library for disassembling
the instructions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bpftool uses libbfd for disassembling JIT-ed programs. But the feature
is optional, and the tool can be compiled without libbfd support. The
Makefile sets the relevant variables accordingly. It also sets variables
related to libbfd's interface, given that it has changed over time.
Group all those libbfd-related definitions so that it's easier to
understand what we are testing for, and only use variables related to
libbfd's interface if we need libbfd in the first place.
In addition to make the Makefile clearer, grouping the definitions
related to disassembling JIT-ed programs will help support alternatives
to libbfd.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make FEATURE_TESTS and FEATURE_DISPLAY easier to read and less likely to
be subject to conflicts on updates by having one feature per line.
Suggested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The JIT disassembler in bpftool is the only components (with the JSON
writer) using asserts to check the return values of functions. But it
does not do so in a consistent way, and diasm_print_insn() returns no
value, although sometimes the operation failed.
Remove the asserts, and instead check the return values, print messages
on errors, and propagate the error to the caller from prog.c.
Remove the inclusion of assert.h from jit_disasm.c, and also from map.c
where it is unused.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
_GNU_SOURCE is defined in several source files for bpftool, but only one
of them takes the precaution of checking whether the value is already
defined. Add #ifndef for other occurrences too.
This is in preparation for the support of disassembling JIT-ed programs
with LLVM, with $(llvm-config --cflags) passing -D_GNU_SOURCE as a
compilation argument.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Typical driver fixes for races and bugs. This also includes a sparse
warning fix for the recently introduced counter_array API: the macro
DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure
definition rather than multiple data structure definitions.
- 104-quad-8
* Fix race getting function mode and direction
- microchip-tcb-capture
* Handle Signal1 read and Synapse
- ti-ecap-capture
* fix IS_ERR() vs NULL check
- counter
* Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCY1a/wQAKCRC1SFbKvhIj
K+BZAP0TKVuXLDU4gBWcLGW+37LBNYn7AdufpkIshrE/6vgj4gEAnc1pMW26miW5
HyWKxNTdcbXz2p/DHXpr6Ef1fh7yBwM=
=bTl5
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
"First set of Counter fixes for 6.1 cycle
Typical driver fixes for races and bugs. This also includes a sparse
warning fix for the recently introduced counter_array API: the macro
DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure
definition rather than multiple data structure definitions.
- 104-quad-8
* Fix race getting function mode and direction
- microchip-tcb-capture
* Handle Signal1 read and Synapse
- ti-ecap-capture
* fix IS_ERR() vs NULL check
- counter
* Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array"
* tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c66563378 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba1 ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To ensure that child node is found, don't rely on child's node name
which can take different value, but on child's compatible name.
Fixes: f5c5936d6b ("usb: dwc3: st: Fix node's child name")
Cc: stable <stable@kernel.org>
Cc: Jerome Audu <jerome.audu@st.com>
Reported-by: Felipe Balbi <felipe@balbi.sh>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The overhead of preparing sg data is high for transfers with limited
payload. When transferring isoc over high-speed usb the maximum payload
is rather small which is a good argument no to use sg. This patch is
changing the uvc_video_encode_isoc_sg encode function only to be used
for super speed gadgets.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20221017221141.3134818-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the cooling device structure stores the max_state value, reuse
it and drop max_states from struct cooling_dev_stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cur_state_store(), the new state of the cooling device is received
from user-space and is not validated by the thermal core but the same is
left for the individual drivers to take care of. Apart from duplicating
the code it leaves possibility for introducing bugs where a driver may
not do it right.
Lets make the thermal core check the new state itself and store the max
value in the cooling device structure.
Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
