Fixes UART1 function bits and MMC groups typo.
For pins 0x97,0x99 function 0 is designated to PWM3/PWM5
respectively, function is 1 designated to the UART1.
Diff from v1:
- sent separately
- added tag Fixes
Cc: stable@vger.kernel.org
Fixes: b582b5a434 ("pinctrl: Ingenic: Add pinctrl driver for JZ4755.")
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016153548.3024209-1-lis8215@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmNMh2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlewH/i4fgZ8l32Sfk3A2
9HcjuEmTtsG1aFOzN09qwK2CNEJXFY9lnwGdBXsRKeSpiq+M9y3rm7NkZByxMs2Z
UUJ4+XOTS5RE4tFdvJ1ZQIWmfEMGoIGI5KK1mqEzdvAMk2TzhDbc54ln3hB2Hnd/
kktqKGCBUQbHBIWJNaEHMmHdOkudmS/D/J62KUW5GN9UDwoQgNdYeSu7uNIotwao
UBWlpLqxWYx+48W+/XLSa5pFigd1z9ygXPkPCpLGstwH3GTSz7nPY/RzhNkzbDyh
iQIaDH+CBI0okFc831GdzyPrvAq7k1djlvOHrPGaBtRRbbtmk3dNRJYlkf7DVYBT
MUZ+4qU=
=Y1e8
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rc1' into next
Merge with mainline to bring in the latest changes to twl4030 driver.
CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It may be necessary for some devices to specify reserved gpios in the
device-specific DTS, in addition to the reserved gpios common to all
devices with a given SoC. Remove this bitmap_fill() call so that the
settings applied to the gpio valid mask by DTS are not overridden by
the driver's reserved gpios.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221014001934.4995-3-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a new driver for the Snapdragon 670 TLMM (Top-Level Mode
Multiplexer). Document it.
Adapted from qcom,sm6350-pinctrl.yaml.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221014001934.4995-2-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
- Fixed review comments (Anshuman)
- In hwm_power1_max_interval_store() get PKG_MAX_WIN from
pkg_power_sku when it is valid (Ashutosh)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
is valid the field PKG_WIN_MAX is not populated. So it is
decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
Fixed variable types in hwm_power1_max_interval_store (Andi)
Documented PKG_MAX_WIN_DEFAULT (Andi)
Removed else in hwm_attributes_visible (Andi)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-7-ashutosh.dixit@intel.com
Use i915 HWMON to display device level energy input.
v2: Updated the date and kernel version in feature description
v3:
- Cleaned up hwm_energy function and removed unused function
i915_hwmon_energy_status_get (Ashutosh)
v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: Change contact to intel-gfx (Rodrigo)
Change return type of hwm_energy to void (Andi)
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-5-ashutosh.dixit@intel.com
Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.
v2:
- Fix review comments (Ashutosh)
- Do not restore power1_max upon module unload/load sequence
because on production systems modules are always loaded
and not unloaded/reloaded (Ashutosh)
- Fix review comments (Jani)
- Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
- Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
- Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)
v6: Fix review comments (Ashutosh)
v7:
- Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move
PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v8: Change contact to intel-gfx (Rodrigo)
Minor change to val_sku_unit init (Andi)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-4-ashutosh.dixit@intel.com
Use i915 HWMON subsystem to display current input voltage.
v2:
- Updated date and kernel version in feature description
- Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
- Fixed review comments (Ashutosh)
- Use hwm_ prefix for static functions (Ashutosh)
v5: Added unit of voltage as millivolts (Ashutosh)
v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v7: Change contact to intel-gfx (Rodrigo)
GEN12_RPSTAT1 is available for all Gen12+ (Andi)
Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
to MAINTAINERS
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-3-ashutosh.dixit@intel.com
The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.
v2:
- Create HWMON infra patch (Ashutosh)
- Fixed review comments (Jani)
- Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
devm_hwmon_device_register_with_info/ (Ashutosh)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-2-ashutosh.dixit@intel.com
ARCH_NR_GPIOS have been removed, clean up the documentation.
After this patch, the only place when ARCH_NR_GPIOS remains is in
translations/zh_CN/gpio.txt and translations/zh_TW/gpio.txt.
I don't have the skills to update that, anyway those two files are
already out of sync as they are still mentionning ARCH_REQUIRE_GPIOLIB
which was removed by commit 65053e1a77 ("gpio: delete
ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 14e85c0e69 ("gpio: remove gpio_descs global array")
there is no limitation on the number of GPIOs that can be allocated
in the system since the allocation is fully dynamic.
ARCH_NR_GPIOS is today only used in order to provide downwards
gpiobase allocation from that value, while static allocation is
performed upwards from 0. However that has the disadvantage of
limiting the number of GPIOs that can be registered in the system.
To overcome this limitation without requiring each and every
platform to provide its 'best-guess' maximum number, rework the
allocation to allocate upwards, allowing approx 2 millions of
GPIOs.
In order to still allow static allocation for legacy drivers, define
GPIO_DYNAMIC_BASE with the value 512 as the start for dynamic
allocation. The 512 value is chosen because it is the end of
the current default range so all current static allocations are
expected to be below that value. Of course that's just a rough
estimate based on the default value, but assuming static
allocations come first, even if there are more static allocations
it should fit under the 512 value.
In the future, it is expected that all static allocations go away
and then dynamic allocation will be patched to start at 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the preparation of getting completely rid of static gpiobase
allocation in the future, emit a warning in drivers still doing so.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 14e85c0e69 ("gpio: remove gpio_descs global array")
there is no global limitation anymore on the number of GPIOs in
the system so don't clamp the number of GPIOs with ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
ARCH_NR_GPIOS is used locally in aggr_parse() as the maximum number
of GPIOs to be aggregated together by the driver since
commit ec75039d55 ("gpio: aggregator: Use bitmap_parselist() for
parsing GPIO offsets").
Don't rely on the total possible number of GPIOs in the system but
define a local arbitrary macro for that, set to 512 which should be
large enough as it is also the default value for ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The u16 "clobber" value is not used in .parainstructions since commit
27876f3882 ("x86/paravirt: Remove clobbers from struct paravirt_patch_site")
Remove the u16 from the section macro, the argument from all macros, and
all now-unused CLBR_* macros.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220903073706.3193746-1-keescook@chromium.org
Using devm_add_action_or_reset() to make workqueue device-managed, so it can be
destroy whenever the driver is unbound.
Fixes: c297561bc9 ("pinctrl: ocelot: Fix interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220925021258.1492905-1-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221005133337.19245-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function mtk_foe_entry_usable() is defined in the mtk_ppe.c file, but
not called elsewhere, so delete this unused function.
drivers/net/ethernet/mediatek/mtk_ppe.c:400:20: warning: unused function 'mtk_foe_entry_usable'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2409
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.
This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,
/*
* When there are no more users of probe(),
* rename probe_new to probe.
*/
if (driver->probe_new)
status = driver->probe_new(client);
else if (driver->probe)
status = driver->probe(client,
i2c_match_id(driver->id_table, client));
else
status = -EINVAL;
Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).
This change was done using the following Coccinelle script, and fixed
up for whitespace changes:
@ rule1 @
identifier fn;
identifier client, id;
@@
- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}
@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@
struct i2c_driver driver = {
- .probe
+ .probe_new
=
(
fn
|
- &fn
+ fn
)
,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Yang Yingliang says:
====================
net: ethernet: mtk_eth_wed: fixe some leaks
I found some leaks in mtk_eth_soc.c/mtk_wed.c.
patch#1 - I found mtk_wed_exit() is never called, I think mtk_wed_exit() need
be called in error path or module remove function to free the memory
allocated in mtk_wed_add_hw().
patch#2 - The device is not put in error path in mtk_wed_add_hw().
patch#3 - The device_node pointer returned by of_parse_phandle() with refcount
incremented, it should be decreased when it done.
This patchset was just compiled tested because I don't have any HW on
which to do the actual tests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The device_node pointer returned by of_parse_phandle() with refcount
incremented, when finish using it, the refcount need be decreased.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After calling get_device() in mtk_wed_add_hw(), in error path, put_device()
needs be called.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw().
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 0d58280cf1 ("phy: Update PHY power control sequence") the
PHY is powered on before configuring the registers and only the MSM8996
PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS
initialisation table, may possibly require a second update afterwards.
To make things worse, the POWER_DOWN_CONTROL register lies at a
different offset on more recent SoCs so that the second update, which
still used a hard-coded offset, would write to an unrelated register
(e.g. a revision-id register on SC8280XP).
As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop
the bogus register update.
Fixes: e4d8b05ad5 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #RB3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Keep the clock lists together and sorted by symbol name.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-11-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v4) offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-8-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This driver uses v2 registers only so drop the unnecessary
POWER_DOWN_CONTROL override.
Note that this register is already hard-coded when powering on the PHY.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the power-down-control register update that powers on the PHY to
the power-on handler so that it matches the power-off handler.
Note that the power-on handler is currently always called directly
after init.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the common-block register defines that are unused since the QMP
driver split.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the unused UFS reset code which isn't used since the QMP driver
split.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All QMP drivers but the MSM8996 and combo ones handle exactly one PHY
and the corresponding memory resources are not per-lane, but per PHY.
Update the obsolete comments.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, determine_rate() is not doing any round operation
and due to this it always selects a lower clock source compared
to the closest higher one.
Support sd clk mux round operation by passing
CLK_MUX_ROUND_CLOSEST flag to clk_mux_determine_rate_flags().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220919084110.3065156-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The iio_triggered_buffer_setup_ext() was changed by
commit 15097c7a1a ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.
Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1a ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Link: https://lore.kernel.org/r/cf8a56658fc38db8bed64f456d898f5ad5a2814f.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
