In ieee80211_tx_dequeue() we currently allow a control port
frame to be transmitted on a non-authorized port only if the
A2 matches the local interface address, but if that's an MLD
and the peer is a legacy peer, we need to allow link address
here. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an AP interface, when userspace specifieds the link ID to
transmit the control port frame on (in particular for the
initial 4-way-HS), due to the logic in ieee80211_build_hdr()
for a frame transmitted from/to an MLD, we currently build a
header with
A1 = DA = MLD address of the peer MLD
A2 = local link address (!)
A3 = SA = local MLD address
This clearly makes no sense, and leads to two problems:
- if the frame were encrypted (not true for the initial
4-way-HS) the AAD would be calculated incorrectly
- if iTXQs are used, the frame is dropped by logic in
ieee80211_tx_dequeue()
Fix the addressing, which fixes the first bullet, and the
second bullet for peer MLDs, I'll fix the second one for
non-MLD peers separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is simple here, and might save drivers some work if
they have common code for TX between beacons and other
frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code for determining which links to update in wmediumd
or virtio was wrong, fix it to remove the deflink only if
there were no old links, and also add the deflink if there
are no other new links.
Fixes: c204d9df02 ("wifi: mac80211_hwsim: handle links for wmediumd/virtio")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To helper drivers if they e.g. have a lookup of the link_sta
pointer, add the link ID to the link_sta structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For AP/non-AP the EHT MCS/NSS subfield size differs, the
4-octet subfield is only used for 20 MHz-only non-AP STA.
Pass an argument around everywhere to be able to parse it
properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The next patch will require splitting the data here into
AP and non-AP because for EHT, the format of the MCS/NSS
support (struct ieee80211_eht_mcs_nss_supp) is different,
for AP the only_20mhz cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities
Field shouldn't be included in case the device doesn't have support for
EMLSR or EMLMR.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When queuing frames to an interface store the link ID we
determined (which possibly came from the driver in the
RX status in the first place) in the RX status, and use
it in the MLME code to send probe responses, beacons and
CSA frames to the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With link_id reported in rx_status for MLO connection, do the
stats update on the appropriate link instead of always deflink.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-3-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, when the address translation from link to MLD is done
in fw/hw, it is necessary to be able to have some information
on the link on which the frame has been received. Extend the
rx API to include link_id and a valid flag in ieee80211_rx_status.
Also make chanes to mac80211 rx APIs to make use of the reported
link_id after sanity checks.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement key installation and lookup (on TX and RX)
for MLO, so we can use multiple GTKs/IGTKs/BIGTKs.
Co-authored-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, MLO support is not added for WEXT code and WEXT handlers are
prevented on MLDs. Prevent WEXT handler cfg80211_wext_siwencodeext()
also on MLD which is missed in commit 7b0a0e3c3a ("wifi: cfg80211: do
some rework towards MLO link APIs")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLO connections are not supposed to use WEP security. Reject connect
response of MLO connection if WEP security mode is used.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've already freed the assoc_data at this point, so need
to use another copy of the AP (MLD) address instead.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Configure the correct link per the passed parameters.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Tx queue parameters are per link, so add the link ID
from nl80211 parameters to the API.
While at it, lock the wdev when calling into the driver
so it (and we) can check the link ID appropriately.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an AP interface, set the link BSSID when the link
is initialized.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking for channel regulatory validity, use the
AP link chandef (and not mesh's chandef).
Fixes: 7b0a0e3c3a ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Based on changes in the specification the TBTT information in
the RNR can include MLD information, so update the parsing to
allow extracting the short SSID information in such a case.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_sta_remove_link, valid_links is set to
the new_links before calling drv_change_sta_links, but
is used for the old_links.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no link ID, then check that there are no changes to
the link, and if so accept them, unless a new link is created.
While at it, reject creating a new link without an address.
This fixes authorizing an MLD (peer) that has no link 0.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is no need for a driver to individually add/create device groups,
the driver core will do it automatically for you. Convert the
hid-playstation driver to use the dev_groups pointer instead of manually
calling the driver core to create the group and have it be cleaned up
later on by the devm core.
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce a simple helper function to replace a common pattern.
When accessing the GRO header, we fetch the pointer from frag0,
then test its validity and fetch it from the skb when necessary.
This leads to the pattern
skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow
recurring many times throughout GRO code.
This patch replaces these patterns with a single inlined function
call, improving code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220823071034.GA56142@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Parblo A610 PRO is a UGEE v2 device with a frame with 9 buttons
and a bitmap dial. Its pen has 2 buttons, supports tilt and pressure.
Add its ID in order to support the device.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The XP-PEN Deco Pro S is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and
pressure.
All the pieces to support it are already in place. Add its ID in order
to support the device.
The required Wireshark traces were captured by Jouke Witteveen.
For more information check [1].
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/738 [1]
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the required HID descriptors and the initialization function for
UGEE v2 frames with a mouse in the frame.
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the required HID descriptors and the initialization function for
UGEE v2 frames with a bitmap dial.
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The string descriptor returned by UGEE v2 devices contains a byte
indicating the device frame type.
The values discovered so far are:
- 0: Frame with buttons, present in the XP-PEN Deco L.
- 1: Frame with buttons and dial, present in the PARBLO A610 PRO.
- 2: Frame with buttons and a mouse, shaped as a dial + touchpad.
Present in the XP-PEN Deco Pro S.
Parse the frame type and add KUnit tests.
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
At the moment, the driver only supports UGEE v2 devices that have
buttons in their frames.
In order to support other types of frames in the future, move the code
used to initialize this kind of frames to its own function.
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The UGEE v2 tablets expose a string descriptor with their capabilities.
Move the code used to parse the descriptors and generate a parameter
list from it to its own function and add KUnit tests to validate the
parser.
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The KUnit documentation [1] suggests allowing build tests as a module.
In addition, it is recommended [2] to use snake case names for
kunit_suite and test cases.
Change the Kconfig entry from bool to tristate and stick to the naming
conventions to avoid style issues with future tests.
Link: https://docs.kernel.org/dev-tools/kunit/style.html#test-kconfig-entries [1]
Link: https://www.kernel.org/doc/html/latest/dev-tools/kunit/style.html [2]
Acked-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Building with Sparse enabled prints this warning:
warning: incorrect type in assignment (different base types)
expected signed int x
got restricted __le32 [usertype]
Cast the return value of cpu_to_le32() to fix the warning.
Fixes: 08177f4 ("HID: uclogic: merge hid-huion driver in hid-uclogic")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Pen (0x02) application usage was changed to Digitalizer (0x01) in
commit f7d8e387d9 ("HID: uclogic: Switch to Digitizer usage for
styluses"). However, a suffix was not selected for the new usage.
Handle the digitalizer application usage in uclogic_input_configured()
and add the required suffix.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no modification for param bitmap in function
bitmap_string() and bitmap_list_string(), so add const
modifier for it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220816144557.30779-1-huangguangbin2@huawei.com
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL
so add this NULL check to prevent an Oops.
Fixes: 9dd1953846 ("wifi: nl80211/mac80211: clarify link ID in control port TX")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int. This means that on 64 bit systems
we return positive values instead of negative error codes.
Fixes: 80a3511d70 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add missing dev_kfree_skb() in an error path in
ieee80211_tx_control_port() to avoid a memory leak.
Fixes: dd820ed633 ("wifi: mac80211: return error from control port TX for drops")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 32-bit powerpc systems with more PCIe controllers and more PCI
domains, where on more PCI domains are same PCI numbers, when kernel is
compiled with CONFIG_PROC_FS=y and
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y options, kernel prints
"proc_dir_entry 'pci/01' already registered" error message.
proc_dir_entry 'pci/01' already registered
WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:377 proc_register+0x1a8/0x1ac
...
NIP proc_register+0x1a8/0x1ac
LR proc_register+0x1a8/0x1ac
Call Trace:
proc_register+0x1a8/0x1ac (unreliable)
_proc_mkdir+0x78/0xa4
pci_proc_attach_device+0x11c/0x168
pci_proc_init+0x80/0x98
do_one_initcall+0x80/0x284
kernel_init_freeable+0x1f4/0x2a0
kernel_init+0x24/0x150
ret_from_kernel_thread+0x5c/0x64
This regression started appearing after commit
5663568130 ("powerpc/pci: Add config option for using all 256 PCI
buses") in case in each mPCIe slot is connected PCIe card and therefore
PCI bus 1 is populated in for every PCIe controller / PCI domain.
The reason is that PCI procfs code expects that when PCI bus numbers are
not unique across all PCI domains, function pci_proc_domain() returns
true for domain dependent buses.
Fix this issue by setting PCI_ENABLE_PROC_DOMAINS and
PCI_COMPAT_DOMAIN_0 flags for 32-bit powerpc code when
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is enabled. Same approach is
already implemented for 64-bit powerpc code (where PCI bus numbers are
always domain dependent).
Fixes: 5663568130 ("powerpc/pci: Add config option for using all 256 PCI buses")
Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Trim change log oops message]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220820115113.30581-1-pali@kernel.org
In vc4_hvs_dump_state() potentially freed resources are protected from
being accessed with drm_dev_enter()/drm_dev_exit().
Also include drm_print_regset32() in the protected section, since
drm_print_regset32() does access memory that is typically mapped via
devm_* calls.
Fixes: 969cfae1f0 ("drm/vc4: hvs: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-5-dakr@redhat.com
(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.
However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.
Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().
Fixes: 7cc4214c27 ("drm/vc4: crtc: Switch to drmm_kzalloc")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-4-dakr@redhat.com
(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.
However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.
Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().
Fixes: 9872c7a319 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com
In vc4_hdmi_encoder_{pre,post}_crtc_enable() commit cd00ed5187
("drm/vc4: hdmi: Protect device resources after removal") missed to
unlock the mutex before returning due to drm_dev_enter() indicating the
device being unplugged.
Fixes: cd00ed5187 ("drm/vc4: hdmi: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-2-dakr@redhat.com