Commit graph

1,189,987 commits

Author SHA1 Message Date
Chris Park
15360d7fc3 drm/amd/display: Switch to correct DTO on HDMI
[Why]
For Pixel Rate control, when on HDMI, HDMI DTO should be selected
instead of DP DTO.

[How]
Pass HDMI parameter for HDMI stream, and select correct DTO.

Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:11:35 -04:00
Alvin Lee
740ccea3d3 drm/amd/display: Change DET policy for MPO cases
For MPO we want to allocate less than maximum DET for MPO pipes because
we need enogh buffer to move DET back to other pipes when removing an
MPO plane. Also update regular DET allocation to use DET override (DCN32
has an internal policy which driver does not want to use)

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:11:26 -04:00
Rodrigo Siqueira
2b2b3a751b drm/amd/display: Use two pixel per container for k1/k2 div
Currently, we check if pixel_encoding is equal to
PIXEL_ENCODING_YCBCR422 to get the k1/k2 div parameters. This commit
changes this logic slightly by checking if two pixels per container are
used.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:11:15 -04:00
Samson Tam
88ef4c5bb3 drm/amd/display: Apply ODM 2:1 policy for single display configuration
[Why]
Most of the time, a single display uses the ODM combine. When using
multi-display, we use ODM combine only if it is necessary. These cases
are not flexible enough for us, and we can improve them to take
advantage of our hardware. We want to have more control over the ODM
policy.

[How]
This commit add a new debug flag named
enable_single_display_2to1_odm_policy to control the ODM policy and
another flag named enable_dp_dig_pixel_rate_div_policy to fine control
the ODM combine. This is possible by adding a new "pipe.dest" parameter
that can be set to ODM 2:1 combined if we use a single display. For
dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for
ODM combine. Note that this feature affects the following registers:

- timing.pix_clk_100khz -> DP_VID_M, DP_VID_N
- requested_pix_clk_100hz -> DP_DTOn_PHASE
- OTGn_PIXEL_RATE_DIVK2
- DP_PIXEL_PER_CYCLE_PROCESSING_MODE
- DIG_FIFO_OUTPUT_PIXEL_MODE
- DP_VID_N_MUL

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:11:08 -04:00
Eric Bernstein
64a30aaf0b drm/amd/display: Add function to set pixels per cycle
Add function to set pixels per cycle in DIG stream encoder

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:11:00 -04:00
Martin Leung
90f33674a0 drm/amd/display: Prepare for new interfaces
[WHY]:
Lut pipeline will be hooked up differently in some asics
need to add new interfaces and missing registers.

[HOW]:
Add missing registers and hook up programming from DPP for pre-blend
lut.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:45 -04:00
Alvin Lee
85f4bc0c33 drm/amd/display: Add SubVP required code
This commit enables the SubVP feature. To achieve that, we need to:

- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
  before setting up SubVp

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:38 -04:00
Rodrigo Siqueira
e72f03f4bd drm/amd/display: Add missing registers for ACP
We are missing some ACP registers/mask value for some specific ASICs.
This commit includes it to those ASICs that support it.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:28 -04:00
Stanley.Yang
e0e146d556 drm/amdgpu: skip whole ras bad page framework on sriov
It should not init whole ras bad page framework on sriov guest side
due to it is handled on host side.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:20 -04:00
Stanley.Yang
26093ce14b drm/amdgpu: Only send ras feature for gfx block
GFX is the only IP block that RAS TA needs to program
the hardware when receiving enable_feature command.

Changed from V1:
    remove amdgpu_ras_need_send_ras_feature inline function,
    use GFX RAS block check directly.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:13 -04:00
Evan Quan
cbe07c982d drm/amd/pm: update SMU 13.0.0 driver_if header
And bump the version to 0x2A.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:10:05 -04:00
Lang Yu
4bdb9d6501 drm/amdkfd: simplify vm_validate_pt_pd_bos
We don't need to validate and map root PD specially here,
it would be validated and mapped by amdgpu_vm_validate_pt_bos
if it is evicted.

The special case is when turning a GFX VM to a compute VM,
if vm_update_mode changed, we should make sure root PD gets
mapped. So just map root PD after updating vm->update_funcs
in amdgpu_vm_make_compute whether the vm_update_mode changed
or not.

v3:
 - Add some comments suggested by Christian.

v2:
 - Don't rename vm_validate_pt_pd_bos and make it public.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:09:55 -04:00
Aurabindo Pillai
cfb979f717 drm/amd: Add debug mask for subviewport mclk switch
[Why&How]
Expose a new dc debug mask enum to force a subviewport memory clock switch
to facilitate easy testing.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05 16:09:24 -04:00
Samuel Holland
db1bfbd60e soc: sunxi: mbus: Only build the driver on ARM/ARM64
This driver exists as a workaround for old devicetrees which are missing
interconnects properties, so it is only useful for those specific
platforms, which all happen to be ARM or ARM64.

This solves the issue that the driver fails to build on RISC-V, where
PHYS_OFFSET is not defined.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032520.22129-1-samuel@sholland.org
2022-07-05 22:05:59 +02:00
Christophe JAILLET
5266409010 PCI: iproc: Use bitmap API to allocate bitmaps
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.

Link: https://lore.kernel.org/r/d839a951358ceb447226dc776590a2a38f3e3f9d.1656940469.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
2022-07-05 15:02:56 -05:00
Samuel Holland
534445e0d1 dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible
The Allwinner D1 contains USB controllers which claim to be compatible
with the OHCI specification version 1.0a.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702195249.54160-4-samuel@sholland.org
2022-07-05 21:53:26 +02:00
Samuel Holland
821d83c20e dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible
The Allwinner D1 contains USB controllers which claim to be compatible
with the EHCI specification version 1.0.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702195249.54160-3-samuel@sholland.org
2022-07-05 21:53:26 +02:00
Samuel Holland
fe938040e0 dt-bindings: usb: sunxi-musb: Add Allwinner D1 compatible
The MUSB controller in the Allwinner D1 has 10 endpoints, making it
compatible with the A33 variant of the hardware.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702195249.54160-2-samuel@sholland.org
2022-07-05 21:53:26 +02:00
Samuel Holland
790edb2eae arm64: dts: allwinner: a100: Update I2C controller fallback
The I2C controllers in the A100 SoC are newer-generation hardware
which includes an offload engine. Signify that by including the
allwinner,sun8i-v536-i2c fallback compatible, as V536 is the first
SoC with this generation of I2C controller.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702052544.31443-2-samuel@sholland.org
2022-07-05 21:49:30 +02:00
Samuel Holland
e01f242a8f dt-bindings: i2c: mv64xxx: Add variants with offload support
V536 and newer Allwinner SoCs contain an updated I2C controller which
includes an offload engine for master mode. The controller retains the
existing register interface, so the A31 compatible still applies.

Add the V536 compatible and use it as a fallback for other SoCs with the
updated hardware. This includes two SoCs that were already documented
(H616 and A100) and two new SoCs (R329 and D1).

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702052544.31443-1-samuel@sholland.org
2022-07-05 21:43:23 +02:00
qianfan Zhao
7d655166db ARM: dts: sun8i-r40: Add thermal trip points/cooling maps
For the trip points, I used values from the BSP code.

The critical trip point value is 30°C above the maximum recommended
ambient temperature (85°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-4-qianfanguijin@163.com
2022-07-05 21:40:18 +02:00
qianfan Zhao
14dbef6772 ARM: dts: sun8i-r40: add opp table for cpu
OPP table value is get from allwinner lichee linux-3.10 kernel driver

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-3-qianfanguijin@163.com
2022-07-05 21:40:13 +02:00
qianfan Zhao
6d5f3f6758 ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board
The CPU of sun8i-r40 is powered by PMIC, let's add "cpu-supply" node.

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-2-qianfanguijin@163.com
2022-07-05 21:35:57 +02:00
George D Sworo
2755714656 powercap: intel_rapl: Add support for RAPTORLAKE_P
Add RAPTORLAKE_P to the list of supported processor models in the Intel
RAPL power capping driver.

Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:59:20 +02:00
Andy Shevchenko
65b6851d24
ASoC: SOF: Intel: byt: remove duplicating driver data retrieval
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:54:03 +01:00
Andy Shevchenko
0d356c186f
ASoC: SOF: Intel: bdw: remove duplicating driver data retrieval
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:54:01 +01:00
Uwe Kleine-König
fb617612fd
ASoC: tegra: tegra20_das: Drop write-only driver data member
The dev member of struct tegra20_das is only written once in .probe().
There is no loss of functionality if the member and the assignment go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:54:00 +01:00
Uwe Kleine-König
a10a8b6661
ASoC: tegra: tegra20_das: Make helper functions return void
These only ever return a value != 0 if the parameter das is NULL. In the
only caller however it's already asserted this isn't the case.

So convert the functions to return void and simplify the caller
accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:59 +01:00
Uwe Kleine-König
eefaea9323
ASoC: tegra: tegra20_das: Get rid of global pointer for driver data
This enables the driver (at least theoretically) to bind to more than one
device.

The remove function has nothing to do now, so it is dropped.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:57 +01:00
Uwe Kleine-König
9a99b9b264
ASoC: tegra: tegra20_das: Remove unused function tegra20_das_read
This function is unused since commit 7203a62562 ("ASoC: convert
Tegra20 DAS driver to regmap").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:56 +01:00
Uwe Kleine-König
6dbc34d9c3
ASoC: tegra: tegra20_das: Fold header file into only user
Since commit fcff5f9974 ("ASoC: tegra: remove unnecessary includes")
the header file (which at the time was named tegra_das.h) there is only
the actual driver that includes it. Just move the definitions into the
driver, drop the exports and remove the completely unused function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:55 +01:00
Judy Hsiao
0ff9f8b9f5
ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR
Add the error code '-EBUSY' when fail to read I2S_CLR
in rockchip_snd_rxctrl() and rockchip_snd_txctrl()

Fixes: 44f362c2cc ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220701021427.3120549-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:53 +01:00
Krzysztof Kozlowski
50791dcb7d
ASoC: dt-bindings: qcom,sm8250: add SDM845 sound
The Qualcomm SDM845 sound card bindings are almost the same as SM8250,
except "pin-switches" and "widgets" properties.  These were not
documented in SDM845 text bindings but are actually valid for SDM845.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220705182802.775803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:52 +01:00
Andy Shevchenko
b03bd21574
ASoC: Intel: catpt: remove duplicating driver data retrieval
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220705155813.75917-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:50 +01:00
Zhang Jiaming
d08412328e
regulator: Fix parameter declaration and spelling mistake.
Use Complete data type declaration of 'sel' in ti_abb_set_voltage_sel().
Fix spelling of 'are'nt' in comments.

Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Link: https://lore.kernel.org/r/20220705071445.21124-1-jiaming@nfschina.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05 19:53:20 +01:00
Bjorn Helgaas
09d3154a6f PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP
Previously the CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP device_init_wakeup()
implementations differed in confusing ways:

  - The PM_SLEEP version checked for a NULL device pointer and returned
    -EINVAL, while the !PM_SLEEP version did not and would simply
    dereference a NULL pointer.

  - When called with "false", the !PM_SLEEP version cleared "capable" and
    "enable" in the opposite order of the PM_SLEEP version.  That was
    harmless because for !PM_SLEEP they're simple assignments, but it's
    unnecessary confusion.

Use a simplified version of the PM_SLEEP implementation for both cases.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:48:46 +02:00
Shyam Sundar S K
ed470febf8 ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
New version of uPEP will have a separate ACPI id, add that
to the support list.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:46:21 +02:00
Mario Limonciello
8b356e536e ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
commit 72f2ecb7ec ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.

This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.

As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.

If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.

Fixes: 72f2ecb7ec ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:36:11 +02:00
Mario Limonciello
7feec7430e ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.

When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.

This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e62852 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.

This was reverted in commit 2ca8e62852 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b44 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.

These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2.  Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.

Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b44 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e62852 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:36:11 +02:00
Eric Auger
3dcb861dbc ACPI: VIOT: Fix ACS setup
Currently acpi_viot_init() gets called after the pci
device has been scanned and pci_enable_acs() has been called.
So pci_request_acs() fails to be taken into account leading
to wrong single iommu group topologies when dealing with
multi-function root ports for instance.

We cannot simply move the acpi_viot_init() earlier, similarly
as the IORT init because the VIOT parsing relies on the pci
scan. However we can detect VIOT is present earlier and in
such a case, request ACS. Introduce a new acpi_viot_early_init()
routine that allows to call pci_request_acs() before the scan.

While at it, guard the call to pci_request_acs() with #ifdef
CONFIG_PCI.

Fixes: 3cf485540e ("ACPI: Add driver for the VIOT table")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Jin Liu <jinl@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 20:25:39 +02:00
Ville Syrjälä
a204f9743b drm: Remove linux/i2c.h from drm_crtc.h
drm_crtc.h has no need for linux/i2c.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching linux/i2c.h.

Quite a few placs do currently depend on linux/i2c.h without
actually including it directly. All of those need to be
fixed up.

v2: imx and mcde need linux/io.h for readl()/etc.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-5-ville.syrjala@linux.intel.com
2022-07-05 21:15:23 +03:00
Ville Syrjälä
72bd9ea389 drm: Remove linux/media-bus-format.h from drm_crtc.h
drm_crtc.h has no need for linux/media-bus-format.h, so don't
include it. Avoids useless rebuilds of the entire universe when
touching linux/media-bus-format.h.

Quite a few placs do currently depend on linux/media-bus-format.h
without actually including it directly. All of those need to be
fixed up.

v2: Deal with ingenic as well
v3: Fix up mxsfb and remaining parts of imx

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
2022-07-05 21:15:13 +03:00
Ville Syrjälä
73289afe03 drm: Remove linux/fb.h from drm_crtc.h
drm_crtc.h has no need for linux/fb.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching linux/fb.h.

Quite a few placs do currently depend on linux/fb.h or other
headers pulled in by it without actually including any of it
directly. All of those need to be fixed up.

v2: Split the vmwgfx change out

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com
2022-07-05 21:14:02 +03:00
Ville Syrjälä
207d2073c6 drm/vmwgfx: Stop using 'TRUE'
Stop using the 'TRUE' define. This ultimately gets defined by
acpi/actypes.h that gets included here via a convoluted chain of
other headers. drm_crtc.h is part of that chain, and I'm trying
to eliminate all unnecessary includes from it to avoid pointless
rebuilds.

v2: Split out from the bigger patch

Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-2-ville.syrjala@linux.intel.com
Reviewed-by: Zack Rusin <zackr@vmware.com<mailto:zackr@vmware.com>>
2022-07-05 21:13:22 +03:00
Kishon Vijay Abraham I
aa0cec248c remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.

Enhance the existing PRU remoteproc driver to support the PRU cores
by using specific compatibles. The initial names for the firmware
images for each PRU core are retrieved from DT nodes, and can be adjusted
through sysfs if required.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220602101920.12504-4-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-07-05 10:40:30 -06:00
Kishon Vijay Abraham I
ca63e3d8f6 dt-bindings: remoteproc: pru: Update bindings for K3 AM62x SoCs
Update the PRU remoteproc bindings for the PRU cores on AM62x SoCs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602101920.12504-3-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-07-05 10:40:30 -06:00
Kishon Vijay Abraham I
10f003b4e6 dt-bindings: remoteproc: pru: Re-arrange "compatible" in alphabetic order
Re-arrange "compatible" string in alphabetic order to decrease the
chance of conflicts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602101920.12504-2-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-07-05 10:40:30 -06:00
Linus Torvalds
e35e5b6f69 xen: security patches for v5.19
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYr64gAAKCRCAXGG7T9hj
 vhx7AQChLGeEpu/4W47ielRG5c2HEg9g36LnRNZA9CyUqWPzPwD7B5LbAbY6gIM2
 8rNbFXQZVbqRTNb82IQlNWbZK5IV9gU=
 =Mee5
 -----END PGP SIGNATURE-----

Merge tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen security fixes from Juergen Gross:

 - XSA-403 (4 patches for blkfront and netfront drivers):

   Linux Block and Network PV device frontends don't zero memory regions
   before sharing them with the backend (CVE-2022-26365,
   CVE-2022-33740). Additionally the granularity of the grant table
   doesn't allow sharing less than a 4K page, leading to unrelated data
   residing in the same 4K page as data shared with a backend being
   accessible by such backend (CVE-2022-33741, CVE-2022-33742).

 - XSA-405 (1 patch for netfront driver, only 5.10 and newer):

   While adding logic to support XDP (eXpress Data Path), a code label
   was moved in a way allowing for SKBs having references (pointers)
   retained for further processing to nevertheless be freed.

 - XSA-406 (1 patch for Arm specific dom0 code):

   When mapping pages of guests on Arm, dom0 is using an rbtree to keep
   track of the foreign mappings.

   Updating of that rbtree is not always done completely with the
   related lock held, resulting in a small race window, which can be
   used by unprivileged guests via PV devices to cause inconsistencies
   of the rbtree. These inconsistencies can lead to Denial of Service
   (DoS) of dom0, e.g. by causing crashes or the inability to perform
   further mappings of other guests' memory pages.

* tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/arm: Fix race in RB-tree based P2M accounting
  xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()
  xen/blkfront: force data bouncing when backend is untrusted
  xen/netfront: force data bouncing when backend is untrusted
  xen/netfront: fix leaking data in shared pages
  xen/blkfront: fix leaking data in shared pages
2022-07-05 09:18:32 -07:00
Konrad Dybcio
7d0221fb59 soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
The driver uses generic genpd OF APIs and with a very minimal config
where nothing else selects them, this driver will not probe, as
of_genpd_add_provider_onecell will return -EOPNOTSUPP.

Make sure to select these in Kconfig to prevent that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
2022-07-05 11:16:46 -05:00
Conor Dooley
efa310ba00 riscv: dts: microchip: hook up the mpfs' l2cache
The initial PolarFire SoC devicetree must have been forked off from
the fu540 one prior to the addition of l2cache controller support being
added there. When the controller node was added to mpfs.dtsi, it was
not hooked up to the CPUs & thus sysfs reports an incorrect cache
configuration. Hook it up.

Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-07-05 16:54:03 +01:00