Previous default settings resulted in loose dynamic
range and low sound level.
New default configuration changes:
- outgain = 2
- quality mode = VLOW0
- dc remover = bypass
Signed-off-by: Irina Patru <ioana-irina.patru@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656405589-29850-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In TDM mode, the BSEL register value must be set according to table 5 in the
datasheet. This patch adds a lookup function and uses it in
max98396_dai_tdm_slot().
As the first 3 entries can also be used for non-TDM setups, the code re-uses
the same table for such scenarios.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220629050630.2848317-1-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to WSA8830/WSA8812/WSA8835 Class-D Smart
Speaker Amplifier. This Amplifier is primarily interfaced with
SoundWire.
This patch is tested on SM8450 MTP Board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds bindings for WSA883x Smart Speaker Amplifier.
This Amplifier also has a simple thermal sensor for temperature
measurments with speaker protection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing cache-level property to L2 caches. This is needed if
we need to find the last level cache directly from the device tree cache
node.
Link: https://lore.kernel.org/r/20220629095959.1115587-1-sudeep.holla@arm.com
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With commit ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
the kernel now validate the addr against high_memory value. This results
in the below BUG_ON with dax pfns.
[ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521!
1:mon> e
cpu 0x1: Vector: 700 (Program Check) at [c000000007287630]
pc: c00000000055ed48: free_pages.part.0+0x48/0x110
lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0
sp: c0000000072878d0
msr: 800000000282b033
current = 0xc00000000afabe00
paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05
pid = 26531, comm = 50-landscape-sy
kernel BUG at :5521!
Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022
1:mon> t
[link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0
[c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable)
[c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0
[c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210
[c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40
[c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00
[c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0
[c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310
[c000000007287d80] c00000000062858c sys_execve+0x4c/0x60
[c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0
[c000000007287e10] c00000000000c53c system_call_common+0xec/0x250
The fix is to make sure we update high_memory on memory hotplug.
This is similar to what x86 does in commit 3072e413e3 ("mm/memory_hotplug: introduce add_pages")
Fixes: ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629050925.31447-1-aneesh.kumar@linux.ibm.com
Trying to build a .c file that includes <linux/bpf_perf_event.h>:
$ cat test_bpf_headers.c
#include <linux/bpf_perf_event.h>
throws the below error:
/usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
14 | bpf_user_pt_regs_t regs;
| ^~~~
This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs'
in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct
user_pt_regs' is not exposed to userspace.
Powerpc has both pt_regs and user_pt_regs structures. However, unlike
arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'.
As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for
userspace.
Within the kernel though, we want to typedef bpf_user_pt_regs_t to
'struct user_pt_regs'.
Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the
uapi/asm-generic version of the header is exposed to userspace.
Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can
typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the
kernel.
Note that this was not showing up with the bpf selftest build since
tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc
variant.
Fixes: a6460b03f9 ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use typical naming for header include guard]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com
The Foxconn e0c3 device identifies itself as a T99W175 X55, add support
for this to the pci_generic driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220627170717.2252335-1-bjorn.andersson@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The HAS_UNMAPPED_ID() helper is fully self contained so we can port it
to vfs{g,u}id_t without much effort.
Cc: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This Makefile appends several objects to obj-y from line 15, but none
of them is linked to vmlinux in an ordinary way.
obj-y is overwritten at line 30:
obj-y := kvm_nvhe.o
So, kvm_nvhe.o is the only object directly linked to vmlinux.
Replace the abused obj-y with hyp-obj-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220613092026.1705630-1-masahiroy@kernel.org
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520115431.147593-1-juergh@canonical.com
In case of 4way handshake offload, cfg80211_port_authorized
enables driver to indicate successful 4way handshake to cfg80211 layer.
Currently this path of port authorization is restricted to
interface type NL80211_IFTYPE_STATION. This patch extends
the use of port authorization API for P2P client as well.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/ef25cb49fcb921df2e5d99e574f65e8a009cc52c.1655905440.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a vif is being removed and sdata->bss is cleared, __ieee80211_wake_txqs
can still be called on it, which crashes as soon as sdata->bss is being
dereferenced.
To fix this properly, check for SDATA_STATE_RUNNING before waking queues,
and take the fq lock when setting it (to ensure that __ieee80211_wake_txqs
observes the change when running on a different CPU)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20220531190824.60019-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce the capability to specify gfp_t parameter to
ieeee80211_obss_color_collision_notify routine since it runs in
interrupt context in ieee80211_rx_check_bss_color_collision().
Fixes: 6d945a33f2 ("mac80211: introduce BSS color collision detection")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like a similar commit to arch/um/drivers/virt-pci.c, call
virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses
the virtqueues in the probe function. (The virtio core sets
the device ready when probe returns.)
Fixes: 8b4ec69d7e ("virtio: harden vring IRQ")
Fixes: 5d44fe7c98 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220613210401.327958-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct perf_event_attr supports exclude counting of idle task.
This is sent to kernel via perf_event_attr.exclude_idle and
in perf tool, user can use ":I" event modifier to enable this
for specific event.
Monitor Mode Control Register 2 (MMCR2) SPR has control bits
for each PMCs to freeze counting based on the Control Register
CTRL[RUN] state. CTRL[RUN] is not set when idle task is
running. Patch adds a check for event attr.exclude_idle to
set MMCR2[FCnWAIT] bit.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429050208.266619-1-maddy@linux.ibm.com
PowerVM has a stricter policy about allocating TCEs for LPARs and
often there is not enough TCEs for 1:1 mapping, this adds the supported
numbers into dev_info() to help analyzing bugreports.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220601040117.1467710-1-aik@ozlabs.ru
KVM manages emulated TCE tables for guest LIOBNs by a two level table
which maps up to 128TiB with 16MB IOMMU pages (enabled in QEMU by default)
and MAX_ORDER=11 (the kernel's default). Note that the last level of
the table is allocated when actual TCE is updated.
However these tables are created via ioctl() on kvmfd and the userspace
can trigger WARN_ON_ONCE_GFP(order >= MAX_ORDER, gfp) in mm/page_alloc.c
and flood dmesg.
This adds __GFP_NOWARN.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220628080228.1508847-1-aik@ozlabs.ru
This adds two atomic opcodes BPF_XCHG and BPF_CMPXCHG on ppc32, both
of which include the BPF_FETCH flag. The kernel's atomic_cmpxchg
operation fundamentally has 3 operands, but we only have two register
fields. Therefore the operand we compare against (the kernel's API
calls it 'old') is hard-coded to be BPF_REG_R0. Also, kernel's
atomic_cmpxchg returns the previous value at dst_reg + off. JIT the
same for BPF too with return value put in BPF_REG_0.
BPF_REG_R0 = atomic_cmpxchg(dst_reg + off, BPF_REG_R0, src_reg);
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> (ppc64le)
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610155552.25892-6-hbathini@linux.ibm.com
This adds two atomic opcodes BPF_XCHG and BPF_CMPXCHG on ppc64, both
of which include the BPF_FETCH flag. The kernel's atomic_cmpxchg
operation fundamentally has 3 operands, but we only have two register
fields. Therefore the operand we compare against (the kernel's API
calls it 'old') is hard-coded to be BPF_REG_R0. Also, kernel's
atomic_cmpxchg returns the previous value at dst_reg + off. JIT the
same for BPF too with return value put in BPF_REG_0.
BPF_REG_R0 = atomic_cmpxchg(dst_reg + off, BPF_REG_R0, src_reg);
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> (ppc64le)
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610155552.25892-4-hbathini@linux.ibm.com
Adding instructions for ppc64 for
atomic[64]_fetch_add
atomic[64]_fetch_and
atomic[64]_fetch_or
atomic[64]_fetch_xor
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> (ppc64le)
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610155552.25892-3-hbathini@linux.ibm.com
Adding instructions for ppc64 for
atomic[64]_and
atomic[64]_or
atomic[64]_xor
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> (ppc64le)
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610155552.25892-2-hbathini@linux.ibm.com
There is no need to read the H_BLOCK_REMOVE characteristics when running in
Radix mode because this hcall is never called.
Furthermore since the commit 387e220a2e ("powerpc/64s: Move hash MMU
support code under CONFIG_PPC_64S_HASH_MMU") define
pseries_lpar_read_hblkrm_characteristics as un empty function if
CONFIG_PPC_64S_HASH_MMU is not set, the #ifdef block can be removed.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220523164353.26441-1-ldufour@linux.ibm.com
The ppc_inst_as_str() macro tries to make printing variable length,
aka "prefixed", instructions convenient. It mostly succeeds, but it does
hide an on-stack buffer, which triggers stack protector.
More problematically it doesn't compile at all with GCC 12,
with -Wdangling-pointer, due to the fact that it returns the char buffer
declared inside the macro:
arch/powerpc/kernel/trace/ftrace.c: In function '__ftrace_modify_call':
./include/linux/printk.h:475:44: error: using a dangling pointer to '__str' [-Werror=dangling-pointer=]
475 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
...
arch/powerpc/kernel/trace/ftrace.c:567:17: note: in expansion of macro 'pr_err'
567 | pr_err("Not expected bl: opcode is %s\n", ppc_inst_as_str(op));
| ^~~~~~
./arch/powerpc/include/asm/inst.h:156:14: note: '__str' declared here
156 | char __str[PPC_INST_STR_LEN]; \
| ^~~~~
This could be fixed by having the caller declare the buffer, but in some
places there'd need to be two buffers. In all cases where
ppc_inst_as_str() is used the output is not really meant for user
consumption, it's almost always indicative of a kernel bug.
A simpler solution is to just print the value as an unsigned long. For
normal instructions the output is identical. For prefixed instructions
the value is printed as a single 64-bit quantity, whereas previously the
low half was printed first. But that is good enough for debug output,
especially as prefixed instructions will be rare in kernel code in
practice.
Old:
c000000000111170 60420000 ori r2,r2,0
c000000000111174 04100001 e580fb00 .long 0xe580fb0004100001
New:
c00000000010f90c 60420000 ori r2,r2,0
c00000000010f910 e580fb0004100001 .long 0xe580fb0004100001
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220531065936.3674348-1-mpe@ellerman.id.au
* kvm-arm64/burn-the-flags:
: .
: Rework the per-vcpu flags to make them more manageable,
: splitting them in different sets that have specific
: uses:
:
: - configuration flags
: - input to the world-switch
: - state bookkeeping for the kernel itself
:
: The FP tracking is also simplified and tracked outside
: of the flags as a separate state.
: .
KVM: arm64: Move the handling of !FP outside of the fast path
KVM: arm64: Document why pause cannot be turned into a flag
KVM: arm64: Reduce the size of the vcpu flag members
KVM: arm64: Add build-time sanity checks for flags
KVM: arm64: Warn when PENDING_EXCEPTION and INCREMENT_PC are set together
KVM: arm64: Convert vcpu sysregs_loaded_on_cpu to a state flag
KVM: arm64: Kill unused vcpu flags field
KVM: arm64: Move vcpu WFIT flag to the state flag set
KVM: arm64: Move vcpu ON_UNSUPPORTED_CPU flag to the state flag set
KVM: arm64: Move vcpu SVE/SME flags to the state flag set
KVM: arm64: Move vcpu debug/SPE/TRBE flags to the input flag set
KVM: arm64: Move vcpu PC/Exception flags to the input flag set
KVM: arm64: Move vcpu configuration flags into their own set
KVM: arm64: Add three sets of flags to the vcpu state
KVM: arm64: Add helpers to manipulate vcpu flags among a set
KVM: arm64: Move FP state ownership from flag to a tristate
KVM: arm64: Drop FP_FOREIGN_STATE from the hypervisor code
Signed-off-by: Marc Zyngier <maz@kernel.org>
It's very easy to confuse __PHYS_OFFSET and PHYS_OFFSET. To clarify
things, let's remove __PHYS_OFFSET and use KERNEL_START directly, with
comments to show that we're using physical address, as we do for other
objects.
At the same time, update the comment regarding the kernel entry address
to mention __pa(KERNEL_START) rather than __pa(PAGE_OFFSET).
There should be no functional change as a result of this patch.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629041207.1670133-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We currently start by assuming that the host owns the FP unit
at load time, then check again whether this is the case as
we are about to run. Only at this point do we account for the
fact that there is a (vanishingly small) chance that we're running
on a system without a FPSIMD unit (yes, this is madness).
We can actually move this FPSIMD check as early as load-time,
and drop the check at run time.
No intended change in behaviour.
Suggested-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
It would be tempting to turn the 'pause' state into a flag.
However, this cannot easily be done as it is updated out of context,
while all the flags expect to only be updated from the vcpu thread.
Turning it into a flag would require to make all flag updates
atomic, which isn't necessary desireable.
Document this, and take this opportunity to move the field next
to the flag sets, filling a hole in the vcpu structure.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we can detect flags overflowing their container, reduce
the size of all flag set members in the vcpu struct, turning them
into 8bit quantities.
Even with the FP state enum occupying 32bit, the whole of the state
that was represented by flags is smaller by one byte. Profit!
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Flags are great, but flags can also be dangerous: it is easy
to encode a flag that is bigger than its container (unless the
container is a u64), and it is easy to construct a flag value
that doesn't fit in the mask that is associated with it.
Add a couple of build-time sanity checks that ensure we catch
these two cases.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We really don't want PENDING_EXCEPTION and INCREMENT_PC to ever be
set at the same time, as they are mutually exclusive. Add checks
that will generate a warning should this ever happen.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The aptly named boolean 'sysregs_loaded_on_cpu' tracks whether
some of the vcpu system registers are resident on the physical
CPU when running in VHE mode.
This is obviously a flag in hidding, so let's convert it to
a state flag, since this is solely a host concern (the hypervisor
itself always knows which state we're in).
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Horray, we have now sorted all the preexisting flags, and the
'flags' field is now unused. Get rid of it while nobody is
looking.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The host kernel uses the WFIT flag to remember that a vcpu has used
this instruction and wake it up as required. Move it to the state
set, as nothing in the hypervisor uses this information.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ON_UNSUPPORTED_CPU flag is only there to track the sad fact
that we have ended-up on a CPU where we cannot really run.
Since this is only for the host kernel's use, move it to the state
set.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The two HOST_{SVE,SME}_ENABLED are only used for the host kernel
to track its own state across a vcpu run so that it can be fully
restored.
Move these flags to the so called state set.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The three debug flags (which deal with the debug registers, SPE and
TRBE) all are input flags to the hypervisor code.
Move them into the input set and convert them to the new accessors.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ggtt->error_mutex);
lock(dma_fence_map);
lock(&ggtt->error_mutex);
lock(cpu_hotplug_lock);
Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.
v2: Fix rebase conflict and added a comment.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com