Commit graph

1,189,987 commits

Author SHA1 Message Date
Russell King (Oracle)
4f1dd48f40 net: phylink: remove pcs_ops member
Remove the pcs_ops member from struct phylink, using the one stored in
struct phylink_pcs instead.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:30:08 -07:00
Krzysztof Kozlowski
5a478a653b nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Reported-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Fixes: caf6e49bf6 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:27:53 -07:00
Eric Dumazet
af9784d007 tcp: diag: add support for TIME_WAIT sockets to tcp_abort()
Currently, "ss -K -ta ..." does not support TIME_WAIT sockets.

Issue has been raised at least two times in the past [1] [2]
it is time to fix it.

[1] https://lore.kernel.org/netdev/ba65f579-4e69-ae0d-4770-bc6234beb428@gmail.com/
[2] https://lore.kernel.org/netdev/CANn89i+R9RgmD=AQ4vX1Vb_SQAj4c3fi7-ZtQz-inYY4Sq4CMQ@mail.gmail.com/T/

While we are at it, use inet_sk_state_load() while tcp_abort()
does not hold a lock on the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20220627121038.226500-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:26:56 -07:00
Dimitris Michailidis
f03c8a1e33 net/funeth: Support for ethtool -m
Add the FW command for reading port module memory pages and implement
ethtool's get_module_eeprom_by_page operation.

Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220627182000.8198-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:26:26 -07:00
YueHaibing
53ad46169f net: ipv6: unexport __init-annotated seg6_hmac_net_init()
As of commit 5801f064e3 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"),
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

This remove the EXPORT_SYMBOL to fix modpost warning:

WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init()
The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.

Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:23:30 -07:00
Dave Airlie
76f0544428 Merge tag 'drm-msm-fixes-2022-06-28' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v5.19-rc5

- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that
  userspace sees the value *after* it is incremented if waiting for vblank
  events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in
  probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check in
  dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in submit
  ioctl

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvswNKdd02EYKYv5Zjv7f+mcqeWC7hHQ1SBjqYzN_ZHnA@mail.gmail.com
2022-06-29 14:16:46 +10:00
katrinzhou
adabdd8f6a ipv6/sit: fix ipip6_tunnel_get_prl return value
When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM.
Move the position of label "out" to return correctly.

Addresses-Coverity: ("Unused value")
Fixes: 300aaeeaab ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.")
Signed-off-by: katrinzhou <katrinzhou@tencent.com>
Reviewed-by: Eric Dumazet<edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:00:34 -07:00
Kuniyuki Iwashima
849d5aa3a1 af_unix: Do not call kmemdup() for init_net's sysctl table.
While setting up init_net's sysctl table, we need not duplicate the
global table and can use it directly as ipv4_sysctl_init_net() does.

Unlike IPv4, AF_UNIX does not have a huge sysctl table for now, so it
cannot be a problem, but this patch makes code consistent.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220627233627.51646-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:58:57 -07:00
Jakub Kicinski
bce3bb30b2 Merge branch 'mptcp-fixes-for-5-19'
Mat Martineau says:

====================
mptcp: Fixes for 5.19

Several categories of fixes from the mptcp tree:

Patches 1-3 are fixes related to MP_FAIL and FASTCLOSE, to make sure
MIBs are accurate, and to handle MP_FAIL transmission and responses at
the correct times. sk_timer conflicts are also resolved.

Patches 4 and 6 handle two separate race conditions, one at socket
shutdown and one with unaccepted subflows.

Patch 5 makes sure read operations are not blocked during fallback to
TCP.

Patch 7 improves the diag selftest, which were incorrectly failing on
slow machines (like the VMs used for CI testing).

Patch 8 avoids possible symbol redefinition errors in the userspace
mptcp.h file.

Patch 9 fixes a selftest build issue with gcc 12.
====================

Link: https://lore.kernel.org/r/20220628010243.166605-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:47 -07:00
Mat Martineau
fd37c2ecb2 selftests: mptcp: Initialize variables to quiet gcc 12 warnings
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.

Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.

Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:43 -07:00
Ossama Othman
06e445f740 mptcp: fix conflict with <netinet/in.h>
Including <linux/mptcp.h> before the C library <netinet/in.h> header
causes symbol redefinition errors at compile-time due to duplicate
declarations and definitions in the <linux/in.h> header included by
<linux/mptcp.h>.

Explicitly include <netinet/in.h> before <linux/in.h> in
<linux/mptcp.h> when __KERNEL__ is not defined so that the C library
compatibility logic in <linux/libc-compat.h> is enabled when including
<linux/mptcp.h> in user space code.

Fixes: c11c5906bc ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:43 -07:00
Paolo Abeni
42fb6cddec selftests: mptcp: more stable diag tests
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.

On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.

Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.

Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:43 -07:00
Paolo Abeni
6aeed90450 mptcp: fix race on unaccepted mptcp sockets
When the listener socket owning the relevant request is closed,
it frees the unaccepted subflows and that causes later deletion
of the paired MPTCP sockets.

The mptcp socket's worker can run in the time interval between such delete
operations. When that happens, any access to msk->first will cause an UaF
access, as the subflow cleanup did not cleared such field in the mptcp
socket.

Address the issue explicitly traversing the listener socket accept
queue at close time and performing the needed cleanup on the pending
msk.

Note that the locking is a bit tricky, as we need to acquire the msk
socket lock, while still owning the subflow socket one.

Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
Paolo Abeni
f745a3ebdf mptcp: consistent map handling on failure
When the MPTCP receive path reach a non fatal fall-back condition, e.g.
when the MPC sockets must fall-back to TCP, the existing code is a little
self-inconsistent: it reports that new data is available - return true -
but sets the MPC flag to the opposite value.

As the consequence read operations in some exceptional scenario may block
unexpectedly.

Address the issue setting the correct MPC read status. Additionally avoid
some code duplication in the fatal fall-back scenario.

Fixes: 9c81be0dbc ("mptcp: add MP_FAIL response support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
Paolo Abeni
d51991e2e3 mptcp: fix shutdown vs fallback race
If the MPTCP socket shutdown happens before a fallback
to TCP, and all the pending data have been already spooled,
we never close the TCP connection.

Address the issue explicitly checking for critical condition
at fallback time.

Fixes: 1e39e5a32a ("mptcp: infinite mapping sending")
Fixes: 0348c690ed ("mptcp: add the fallback check")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
Geliang Tang
76a13b3157 mptcp: invoke MP_FAIL response when needed
mptcp_mp_fail_no_response shouldn't be invoked on each worker run, it
should be invoked only when MP_FAIL response timeout occurs.

This patch refactors the MP_FAIL response logic.

It leverages the fact that only the MPC/first subflow can gracefully
fail to avoid unneeded subflows traversal: the failing subflow can
be only msk->first.

A new 'fail_tout' field is added to the subflow context to record the
MP_FAIL response timeout and use such field to reliably share the
timeout timer between the MP_FAIL event and the MPTCP socket close
timeout.

Finally, a new ack is generated to send out MP_FAIL notification as soon
as we hit the relevant condition, instead of waiting a possibly unbound
time for the next data packet.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/281
Fixes: d9fb797046 ("mptcp: Do not traverse the subflow connection list without lock")
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
Paolo Abeni
31bf11de14 mptcp: introduce MAPPING_BAD_CSUM
This allow moving a couple of conditional out of the fast path,
making the code more easy to follow and will simplify the next
patch.

Fixes: ae66fb2ba6 ("mptcp: Do TCP fallback on early DSS checksum failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
Paolo Abeni
0c1f78a49a mptcp: fix error mibs accounting
The current accounting for MP_FAIL and FASTCLOSE is not very
accurate: both can be increased even when the related option is
not really sent. Move the accounting into the correct place.

Fixes: eb7f33654d ("mptcp: add the mibs for MP_FAIL")
Fixes: 1e75629cb9 ("mptcp: add the mibs for MP_FASTCLOSE")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 20:45:42 -07:00
John Hubbard
a4ab14e1d8 gen_compile_commands: handle multiple lines per .mod file
scripts/clang-tools/gen_compile_commands.py incorrectly assumes that
each .mod file only contains one line. That assumption was correct when
the script was originally created, but commit 9413e76405 ("kbuild:
split the second line of *.mod into *.usyms") changed the .mod file
format so that there is one entry per line, and potentially many lines.

The problem can be reproduced by using Kbuild to generate
compile_commands.json, like this:

    make CC=clang compile_commands.json

In many cases, the problem might be overlooked because many subsystems
only have one line anyway. However, in some subsystems (Nouveau, with
762 entries, is a notable example) it results in skipping most of the
subsystem.

Fix this by fully processing each .mod file.

Fixes: 9413e76405 ("kbuild: split the second line of *.mod into *.usyms")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-06-29 11:43:13 +09:00
Sergey Shtylyov
0184898dd1 ata: libata-scsi: fix result type of ata_ioc32()
While ata_ioc32() returns 'int', its result gets assigned to and compared
with the 'unsigned long' variable 'val' in ata_sas_scsi_ioctl(), its only
caller, which implies a problematic implicit cast (with sign extension).
Fix this by returning 'bool' instead -- the implicit cast then implies
zero extension which is OK.  Note that actually the object code doesn't
change because ata_ioc32() is always inlined -- I can see the expected
code changes with 'noinline'...

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-29 10:44:48 +09:00
Asmaa Mnebhi
a5a3d94fc4 power: reset: pwr-mlxbf: add missing include
Add missing include for devm_work_autocancel to fix build error:

drivers/power/reset/pwr-mlxbf.c: In function 'pwr_mlxbf_probe':
drivers/power/reset/pwr-mlxbf.c:67:15: error: implicit declaration of function 'devm_work_autocancel' [-Werror=implicit-function-declaration]
   67 |         err = devm_work_autocancel(dev, &priv->send_work, pwr_mlxbf_send_work);
      |               ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Fixes: a4c0094fcf ("power: reset: pwr-mlxbf: add BlueField SoC power control driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-06-29 03:39:08 +02:00
Marek Vasut
9db35bb349 drm: lcdif: Add support for i.MX8MP LCDIF variant
Add support for i.MX8MP LCDIF variant. This is called LCDIFv3 and is
completely different from the LCDIFv3 found in i.MX23 in that it has
a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space.

Add a separate driver which is really a fork of MXSFB driver with the
i.MX8MP LCDIF variant handling filled in.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-2-marex@denx.de
2022-06-29 01:44:48 +02:00
Marek Vasut
f5419cb074 dt-bindings: lcdif: Add compatible for i.MX8MP
Add compatible string for i.MX8MP LCDIF variant. This is called LCDIFv3
and is completely different from the LCDIFv3 found in i.MX23 in that it
has a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space. However,
except for the complete bit reshuffling, this is still LCDIF and it still
works like one.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: devicetree@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-1-marex@denx.de
2022-06-29 01:44:47 +02:00
Marek Vasut
5bdaaf4fbf drm/bridge: tc358767: Do not cache dsi_lanes twice
The DSI lane count can be accessed via the dsi device pointer,
make use of that. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624181902.151959-1-marex@denx.de
2022-06-29 01:44:47 +02:00
Francisco Munoz
57a128acab PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs
Add support for VMD devices in MTL-H/P/U/S/M with bus restriction mode and
vector 0 disabled for MSI-X remapping.

Link: https://lore.kernel.org/r/20220628221023.190547-1-francisco.munoz.ruiz@linux.intel.com
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
2022-06-28 18:36:12 -05:00
Kajol Jain
ab8bca92ae selftests/powerpc/pmu: Add test for hardware cache events
The testcase checks if the transalation of a generic hardware cache
event is done properly via perf interface. The hardware cache events has
type as PERF_TYPE_HW_CACHE and each event points to raw event code id.

Testcase checks different combination of cache level, cache event
operation type and cache event result type and verify for a given event
code, whether transalation matches with the current cache event mappings
via perf interface.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-36-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:45 +10:00
Kajol Jain
9ac92fecd1 selftests/powerpc/pmu: Add selftest for group constraint check for MMCRA thresh_sel field
Thresh select bits in the event code is used to program thresh_sel field
in Monitor Mode Control Register A (MMCRA: 45-47). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.

Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (0x101ec) as sibling event, and checks if
group constraint checks for thresh_sel field added correctly via perf
interface.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-35-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:45 +10:00
Kajol Jain
c178606ab5 selftests/powerpc/pmu: Add selftest for group constraint check for MMCRA thresh_ctl field
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.

Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (101ec) as sibling event, and checks if
group constraint checks for thresh_ctl field added correctly via perf
interface.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-34-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:45 +10:00
Kajol Jain
142c9bd1ff selftests/powerpc/pmu: Add selftest for group constraint for unit and pmc field in p9
Unit and pmu bits in the event code is used to program unit and pmc
fields in Monitor Mode Control Register 1 (MMCR1). For power9 platform,
incase unit field value is within 6 to 9, one of the event in the group
should use PMC4. Otherwise event_open should fail for that group.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-33-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:45 +10:00
Kajol Jain
8eaca8c4b4 selftests/powerpc/pmu: Add selftest for group constraint check for MMCRA thresh_cmp field
Thresh compare bits for a event is used to program thresh compare field
in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9 and
MMCRA: 8-18 bits for power10). When scheduling events as a group, all
events in that group should match value in thresh compare bits.
Otherwise event open for the sibling events will fail.

Testcase uses event code "0x401e0" as leader and another event "0x101ec"
as sibling event, and checks for thresh compare constraint via perf
interface.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-32-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:45 +10:00
Kajol Jain
291c01ed20 selftests/powerpc/pmu: Add selftest for group constraint check for MMCR1 cache bits
Data and instruction cache qualifier bits in the event code is used to
program cache select field in Monitor Mode Control Register 1 (MMCR1:
16-17). When scheduling events as a group, all events in that group
should match value in these bits. Otherwise event open for the sibling
events will fail.

Testcase uses event code "0x1100fc" as leader and other events like
"0x23e054" and "0x13e054" as sibling events to checks for l1 cache
select field constraints via perf interface.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-31-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Kajol Jain
20b3073f87 selftests/powerpc/pmu: Add selftest for group constraint check for MMCR0 l2l3_sel bits
In power10, L2L3 select bits in the event code is used to program
l2l3_sel field in Monitor Mode Control Register 0 (MMCR0: 56-60). When
scheduling events as a group, all events in that group should match
value in these bits. Otherwise event open for the sibling events will
fail.

Testcase uses event code "0x010000046080" as leader and another events
"0x26880" and "0x010000026880" as sibling events, and checks for
l2l3_sel constraints via perf interface for ISA v3.1 platform.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-30-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
8efeedf5aa selftests/powerpc/pmu: Add selftest for PERF_TYPE_HARDWARE events valid check
Testcase to ensure that using invalid event in generic event for
PERF_TYPE_HARDWARE will fail. Invalid generic events in power10 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- PERF_COUNT_HW_REF_CPU_CYCLES

Invalid generic events in power9 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_REF_CPU_CYCLES

Testcase does event open for valid and invalid generic events to ensure
event open works for all valid events and fails for invalid events.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-29-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
3f1a87425f selftests/powerpc/pmu: Add selftest for event alternatives for power10
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.

Testcase exercises the alternative event find code for power10. Example,
Using PMC1 to PMC4 in a group and again trying to schedule
PM_CYC_ALT (0x0001e) will fail since this exceeds number of programmable
events in group. But since 0x600f4 is an alternative event for 0x0001e,
it is possible to use 0x0001e in the group. Testcase uses such
combination all events in power10 which has alternative event.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-28-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
5958ad4392 selftests/powerpc/pmu: Add selftest for event alternatives for power9
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.

Testcase exercises the alternative event find code for power9. Example,
since events in same PMC can't go in as a group, ideally using
PM_RUN_CYC_ALT (0x200f4) and PM_BR_TAKEN_CMPL (0x200fa) will fail. But
since RUN_CYC (0x600f4) is alternative event for 0x200f4, it is possible
to use 0x600f4 and 0x200fa as group. Testcase uses such combination for
all events in power9 which has an alternative event.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-27-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
a77c69766c selftests/powerpc/pmu: Add selftest for blacklist events check in power9
Some of the events are blacklisted in power9. The list of blacklisted
events are noted in power9-events-list.h When trying to do event open
for any of these blacklisted event will cause a failure. Testcase
ensures that using blacklisted events will cause event_open to fail in
power9. This test is only applicable on power9 DD2.1 and DD2.2 and hence
test adds checks to skip on other platforms.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-26-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
0c90263339 selftests/powerpc/pmu: Add selftest for reserved bit check for MMCRA thresh_ctl field
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
thresh_ctl bits. For MMCRA[48:51]/[52:55]) Threshold Start/Stop,
0b11110000/0b00001111 is reserved.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-25-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
5196a27978 selftests/powerpc/pmu: Add selftest for checking invalid bits in event code
Some of the bits in the event code is reserved for specific platforms.
Event code bits 52-59 are reserved in power9, whereas in power10, these
are used for programming Monitor Mode Control Register 3 (MMCR3). Bit 9
in event code is reserved in power9, whereas it is used for programming
"radix_scope_qual" bit 18 in Monitor Mode Control Register 1 (MMCR1).

Testcase to ensure that using reserved bits in event code should cause
event_open to fail.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-24-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:44 +10:00
Athira Rajeev
122b6b9e57 selftests/powerpc/pmu: Add selftest for group constraint check MMCRA sample bits
Events with different "sample" field values which is used to program
Monitor Mode Control Register A (MMCRA) in a group will fail to
schedule. Testcase uses event with load only sampling mode as group
leader and event with store only sampling as sibling event. So that it
can check that using different sample bits in event code will fail in
event open for group of events

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-23-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
beebeecb47 selftests/powerpc/pmu: Add selftest for group constraint for MMCRA Sampling Mode field
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
Random Sampling Mode (SM) value. As per Instruction Set
Architecture (ISA), the values 0x5, 0x9, 0xD, 0x19, 0x1D, 0x1A, 0x1E are
reserved for sampling mode field. Test that having these reserved bit
values should cause event_open to fail. Input event code in testcases
uses these sampling bits along with 401e0 (PM_MRK_INST_CMPL).

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-22-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
dc431be3b5 selftests/powerpc/pmu: Add selftest for group constraint check for radix_scope_qual field
Testcase for group constraint check for radix_scope_qual field which is
used to program Monitor Mode Control Register (MMCR1) bit 18. All events
in the group should match radix_scope_qual bit, otherwise event_open for
the group should fail. Testcase uses "0x14242" (PM_DATA_RADIX_PROCESS_L2_PTE_FROM_L2)
with radix_scope_qual bit set for power10.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-21-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
38b6da4530 selftests/powerpc/pmu: Add selftest for group constraint check when using same PMC
Testcase for group constraint check when using events with same PMC.
Multiple events in a group asking for same PMC should fail. Testcase
uses "0x22C040" on PMC2 as leader and also subling which is expected to
fail. Using PMC1 for sibling event should pass the test.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-20-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
827765a449 selftests/powerpc/pmu: Add selftest to check constraint for number of counters in use.
Testcase for group constraint check for number of counters in use. The
number of programmable counters is from PMC1 to PMC4. Testcase uses four
events with PMC1 to PMC4 and 5th event without any PMC which is expected
to fail since it is exceeding the number of counters in use.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-19-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
4000c2e5d4 selftests/powerpc/pmu: Add selftest to check PMC5/6 is excluded from some constraint checks
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) should be excluded from constraint check when
scheduled along with group of events. Example, combination of PMC5,
PMC6, and an event with cache bit will succeed to schedule though first
two events doesn't have cache bit set. Testcase use three events, ie,
600f4(cycles), 500fa(instructions), 22C040 with cache bit (dc_ic) set to
test this constraint check.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-18-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
9258c0aa75 selftests/powerpc/pmu: Add selftest for group constraint check for PMC5 and PMC6
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) can't have other fields in event code like
cache bits, thresholding or marked bit. PMC5 and PMC6 only supports base
events: ie 500fa and 600f4. Other combinations should fail. Testcase
tries setting other bits in event code for 500fa and 600f4 to check this
scenario.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-17-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:43 +10:00
Athira Rajeev
0a110a4b69 selftests/powerpc/pmu: Add support for perf event code tests
Add new folder for enabling perf event code tests which includes
checking for group constraints, valid/invalid events, also checks for
event excludes, alternatives so on. A new folder "event_code_tests", is
created under "selftests/powerpc/pmu".

Also updates the corresponding Makefiles in "selftests/powerpc" and
"event_code_tests" folder.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-16-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:42 +10:00
Kajol Jain
78cd598af6 selftests/powerpc/pmu: Add interface test for bhrb disable field for non-branch samples
The testcase uses "instructions" event to generate the samples and fetch
Monitor Mode Control Register A (MMCRA) when overflow. Branch History
Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be
verified by perf interface. Incase sample is not of branch type, bhrb
disable bit is explicitly set to 1. Testcase checks if the bhrb disable
bit is set of MMCRA register via perf interface for ISA v3.1 platform

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-15-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:42 +10:00
Athira Rajeev
0321f2d0ae selftests/powerpc/pmu: Add selftest for mmcr1 pmcxsel/unit/cache fields
The testcase uses event code "0x21c040" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The fields
include PMCxSEL, PMCXCOMB PMCxUNIT, cache. Checks if these fields are
translated correctly via perf interface to MMCR1

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-14-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:42 +10:00
Athira Rajeev
f6380e05aa selftests/powerpc/pmu: Add selftest for checking valid and invalid bhrb filter maps
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. All the branch filters are not
supported in powerpc. Example, power10 platform supports any, ind_call
and cond branch filters. Whereas, it is different in power9. Testcase
checks event open for invalid and valid branch sample types. The branch
types for testcase are picked from "perf_branch_sample_type" in
perf_event.h

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-13-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:42 +10:00
Athira Rajeev
11bbc52439 selftests/powerpc/pmu: Add selftest to check PERF_SAMPLE_REGS_INTR option will not crash on any platforms
With sampling, --intr-regs option is used for capturing
interrupt regs. When --intr-regs option is used, PMU code
uses is_sier_available() function which uses PMU flags in
the code. In environment where platform specific PMU is
not registered, PMU flags is not defined. A fix was added
in kernel to address crash while accessing is_sier_available()
function when pmu is not set. commit f75e7d73bd ("powerpc/perf:
Fix crash with is_sier_available when pmu is not set").

Add perf sampling test to exercise this code and make sure
enabling intr_regs shouldn't crash in any platform. Testcase
uses software event cycles since software event will work even
in cases without PMU.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-12-atrajeev@linux.vnet.ibm.com
2022-06-29 08:57:42 +10:00