When a writer thread executes a chain of log intent items, the AG header
buffer locks will cycle during a transaction roll to get from one intent
item to the next in a chain. Although scrub takes all AG header buffer
locks, this isn't sufficient to guard against scrub checking an AG while
that writer thread is in the middle of finishing a chain because there's
no higher level locking primitive guarding allocation groups.
When there's a collision, cross-referencing between data structures
(e.g. rmapbt and refcountbt) yields false corruption events; if repair
is running, this results in incorrect repairs, which is catastrophic.
Fix this by adding to the perag structure the count of active intents
and make scrub wait until it has both AG header buffer locks and the
intent counter reaches zero.
One quirk of the drain code is that deferred bmap updates also bump and
drop the intent counter. A fundamental decision made during the design
phase of the reverse mapping feature is that updates to the rmapbt
records are always made by the same code that updates the primary
metadata. In other words, callers of bmapi functions expect that the
bmapi functions will queue deferred rmap updates.
Some parts of the reflink code queue deferred refcount (CUI) and bmap
(BUI) updates in the same head transaction, but the deferred work
manager completely finishes the CUI before the BUI work is started. As
a result, the CUI drops the intent count long before the deferred rmap
(RUI) update even has a chance to bump the intent count. The only way
to keep the intent count elevated between the CUI and RUI is for the BUI
to bump the counter until the RUI has been created.
A second quirk of the intent drain code is that deferred work items must
increment the intent counter as soon as the work item is added to the
transaction. When a BUI completes and queues an RUI, the RUI must
increment the counter before the BUI decrements it. The only way to
accomplish this is to require that the counter be bumped as soon as the
deferred work item is created in memory.
In the next patches we'll improve on this facility, but this patch
provides the basic functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a new tracepoint so that I can see exactly what and where we failed
the refcount check.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Update the copyright years in the scrub/ source code files. This isn't
required, but it's helpful to remind myself just how long it's taken to
develop this feature.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Fix the spdx tags to match current practice, and update the author
contact information.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are a few places in the XFS codebase where a caller has either an
active or a passive reference to a perag structure and wants to give
a passive reference to some other piece of code. Btree cursor creation
and inode walks are good examples of this. Replace the open-coded logic
with a helper to do this.
The new function adds a few safeguards -- it checks that there's at
least one reference to the perag structure passed in, and it records the
refcount bump in the ftrace information. This makes it much easier to
debug perag refcounting problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Give the xfs_refcount_intent a passive reference to the perag structure
data. This reference will be used to enable scrub intent draining
functionality in subsequent patches. Any space being modified by a
refcount intent is already allocated, so we need to be able to operate
even if the AG is being shrunk or offlined.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Give the xfs_rmap_intent a passive reference to the perag structure
data. This reference will be used to enable scrub intent draining
functionality in subsequent patches. The space we're (reverse) mapping
is already allocated, so we need to be able to operate even if the AG is
being shrunk or offlined.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Give the xfs_extfree_intent an passive reference to the perag structure
data. This reference will be used to enable scrub intent draining
functionality in subsequent patches. The space being freed must already
be allocated, so we need to able to run even if the AG is being offlined
or shrunk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Pass a reference to the per-AG structure to xfs_free_extent. Most
callers already have one, so we can eliminate unnecessary lookups. The
one exception to this is the EFI code, which the next patch will fix.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Give the xfs_bmap_intent an active reference to the perag structure
data. This reference will be used to enable scrub intent draining
functionality in subsequent patches. Later, shrink will use these
passive references to know if an AG is quiesced or not.
The reason why we take a passive ref for a file mapping operation is
simple: we're committing to some sort of action involving space in an
AG, so we want to indicate our interest in that AG. The space is
already allocated, so we need to be able to operate on AGs that are
offline or being shrunk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add the seventh and final chapter of the online fsck documentation,
where we talk about future functionality that can tie in with the
functionality provided by the online fsck patchset.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add the sixth chapter of the online fsck design documentation, where
we discuss the details of the data structures and algorithms used by the
driver program xfs_scrub.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Directory tree repairs are the least complete part of online fsck, due
to the lack of directory parent pointers. However, even without that
feature, we can still make some corrections to the directory tree -- we
can salvage as many directory entries as we can from a damaged
directory, and we can reattach orphaned inodes to the lost+found, just
as xfs_repair does now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
File-based metadata (such as xattrs and directories) can be extremely
large. To reduce the memory requirements and maximize code reuse, it is
very convenient to create a temporary file, use the regular dir/attr
code to store salvaged information, and then atomically swap the extents
between the file being repaired and the temporary file. Record the high
level concepts behind how temporary files and atomic content swapping
should work, and then present some case studies of what the actual
repair functions do.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Certain parts of the online fsck code need to scan every file in the
entire filesystem. It is not acceptable to block the entire filesystem
while this happens, which means that we need to be clever in allowing
scans to coordinate with ongoing filesystem updates. We also need to
hook the filesystem so that regular updates propagate to the staging
records.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add to the fifth chapter of the online fsck design documentation, where
we discuss the details of the data structures and algorithms used by the
kernel to repair file metadata.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a discussion of the btree bulk loading code, which makes it easy to
take an in-memory recordset and write it out to disk in an efficient
manner. This also enables atomic switchover from the old to the new
structure with minimal potential for leaking the old blocks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a discussion of pageable kernel memory, since online fsck needs
quite a bit more memory than most other parts of the filesystem to stage
records and other information.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Writes to an XFS filesystem employ an eventual consistency update model
to break up complex multistep metadata updates into small chained
transactions. This is generally good for performance and scalability
because XFS doesn't need to prepare for enormous transactions, but it
also means that online fsck must be careful not to attempt a fsck action
unless it can be shown that there are no other threads processing a
transaction chain. This part of the design documentation covers the
thinking behind the consistency model and how scrub deals with it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Begin the fifth chapter of the online fsck design documentation, where
we discuss the details of the data structures and algorithms used by the
kernel to examine filesystem metadata and cross-reference it around the
filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Start the fourth chapter of the online fsck design documentation, which
discusses the user interface and the background scrubbing service.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Start the third chapter of the online fsck design documentation. This
covers the testing plan to make sure that both online and offline fsck
can detect arbitrary problems and correct them without making things
worse.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Start the second chapter of the online fsck design documentation.
This covers the general theory underlying how online fsck works.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Start the first chapter of the online fsck design documentation.
This covers the motivations for creating this in the first place.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e50 ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a check for errors in the start_io function that signal a not
working device. Trigger an autoquiesce event in that case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.
The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.
The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.
Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a sysfs attribute to control if all IO requests will be requeued to
the blocklayer in case of an autoquiesce event or not.
A value of 1 means that in case of an autoquiesce event all IO requests
will be requeued to the blocklayer.
A value of 0 means that the device will only be stopped.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add sysfs attribute that controls the DASD autoquiesce feature.
The autoquiesce is disabled when 0 is echoed to the attribute.
A value greater than 0 will enable the feature.
The aq_mask attribute will accept an unsigned integer and the value
will be interpreted as bitmask defining the trigger events that will
lead to an automatic quiesce.
The following autoquiesce triggers will currently be available:
DASD_EER_FATALERROR 1 - any final I/O error
DASD_EER_NOPATH 2 - no remaining paths for the device
DASD_EER_STATECHANGE 3 - a state change interrupt occurred
DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended
DASD_EER_NOSPC 5 - there is no space remaining on an ESE device
DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred
DASD_EER_STARTIO 7 - the IO start function encountered an error
The currently supported maximum value is 255.
Bit 31 is reserved for internal usage.
Bit 0 is not used.
Example:
- deactivate autoquiesce
$ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask
- enable autoquiesce for FATALERROR, NOPATH and TIMEOUT
(0000 0000 0000 0000 0000 0000 0100 0110 => 70)
$ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove definitions that have never been used.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add DT compatible for Data Modul i.MX8M Plus eDM SBC board.
This is an evaluation board for various custom display units.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the compatibles for the chargebyte Tarragon boards.
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
chargebyte supplies hardware and software products for all
aspects of charging communication.
https://chargebyte.com/
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In lpfc_sli4_pci_mem_unset(), case LPFC_SLI_INTF_IF_TYPE_1 does not have a
break statement, resulting in an incorrect device output.
Fix this by adding a break statement before the default option.
Signed-off-by: Jun Chen <jun_c@hust.edu.cn>
Link: https://lore.kernel.org/r/20230410023724.3209455-1-jun_c@hust.edu.cn
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver uses spin lock without irqsave when it needs to acquire a chain
frame. This is done to protect chain frame allocation from multiple
submission threads. If there is any I/O queued from an interrupt context,
and if that requires a chain frame, and if the chain lock is held by the CPU
which got interrupted, then there will be a possible deadlock.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230406101819.10109-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch reports: drivers/scsi/scsi_debug.c:6996
scsi_debug_init() warn: missing error code 'ret'
Although it is unlikely that KMEM_CACHE might fail, but if it does then ret
might be zero. So to fix this explicitly mark ret as "-ENOMEM" and then
goto driver_unreg.
Fixes: 1107c7b24e ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230406074607.3637097-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The suspend/resume functions in this driver seem to have multiple problems,
the latest one just got introduced by a bugfix:
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw':
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count'
5142 | if (atomic_read(&device->power.usage_count)) {
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw':
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count'
5142 | if (atomic_read(&device->power.usage_count)) {
As far as I can tell, the 'usage_count' is not meant to be accessed by
device drivers at all, though I don't know what the driver is supposed to
do instead.
Another problem is the use of the deprecated UNIVERSAL_DEV_PM_OPS(), and
marking functions as __maybe_unused to avoid warnings about unused
functions. This should probably be changed to using
DEFINE_RUNTIME_DEV_PM_OPS().
Both changes require actually understanding what the driver needs to do,
and being able to test this, so instead here is the simplest patch to make
it pass the randconfig builds instead.
Fixes: e368d38cb9 ("scsi: hisi_sas: Exit suspend state when usage count is greater than 0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230405083611.3376739-1-arnd@kernel.org
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit 3fe97ff3d9 ("scsi: ses: Don't attach if enclosure
has no components") and introduces proper handling of case where there are
no detected secondary components, but primary component (enumerated in
num_enclosures) does exist. That fix was originally proposed by Ding Hui
<dinghui@sangfor.com.cn>.
Completely ignoring devices that have one primary enclosure and no
secondary one results in ses_intf_add() bailing completely
scsi 2:0:0:254: enclosure has no enumerated components
scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such
even on valid configurations with 1 primary and 0 secondary enclosures as
below:
# sg_ses /dev/sg0
3PARdata SES 3321
Supported diagnostic pages:
Supported Diagnostic Pages [sdp] [0x0]
Configuration (SES) [cf] [0x1]
Short Enclosure Status (SES) [ses] [0x8]
# sg_ses -p cf /dev/sg0
3PARdata SES 3321
Configuration diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
enclosure descriptor list
Subenclosure identifier: 0 [primary]
relative ES process id: 0, number of ES processes: 1
number of type descriptor headers: 1
enclosure logical identifier (hex): 20000002ac02068d
enclosure vendor: 3PARdata product: VV rev: 3321
type descriptor header and text list
Element type: Unspecified, subenclosure id: 0
number of possible elements: 1
The changelog for the original fix follows
=====
We can get a crash when disconnecting the iSCSI session,
the call trace like this:
[ffff00002a00fb70] kfree at ffff00000830e224
[ffff00002a00fba0] ses_intf_remove at ffff000001f200e4
[ffff00002a00fbd0] device_del at ffff0000086b6a98
[ffff00002a00fc50] device_unregister at ffff0000086b6d58
[ffff00002a00fc70] __scsi_remove_device at ffff00000870608c
[ffff00002a00fca0] scsi_remove_device at ffff000008706134
[ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4
[ffff00002a00fd10] scsi_remove_target at ffff0000087064c0
[ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4
[ffff00002a00fdb0] process_one_work at ffff00000810f35c
[ffff00002a00fe00] worker_thread at ffff00000810f648
[ffff00002a00fe70] kthread at ffff000008116e98
In ses_intf_add, components count could be 0, and kcalloc 0 size scomp,
but not saved in edev->component[i].scratch
In this situation, edev->component[0].scratch is an invalid pointer,
when kfree it in ses_intf_remove_enclosure, a crash like above would happen
The call trace also could be other random cases when kfree cannot catch
the invalid pointer
We should not use edev->component[] array when the components count is 0
We also need check index when use edev->component[] array in
ses_enclosure_data_process
=====
Reported-by: Michal Kolar <mich.k@seznam.cz>
Originally-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: stable@vger.kernel.org
Fixes: 3fe97ff3d9 ("scsi: ses: Don't attach if enclosure has no components")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm
Tested-by: Michal Kolar <mich.k@seznam.cz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns false, drbl_regs_memmap_p is not remapped. This passes a NULL
pointer to iounmap(), which can trigger a WARN() on certain arches.
When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns true, drbl_regs_memmap_p may has been remapped and
ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a
NULL pointer to iounmap().
To fix these issues, we need to add null checks before iounmap(), and
change some goto labels.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Shuchang Li <lishuchang@hust.edu.cn>
Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cn
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Warnings may be logged during driver removal:
mpt3sas 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT ..,
Fix this by deallocating DMA memory later.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230403184736.6399-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is done to avoid ambiguity between BIOS and UEFI versions. Management
tools can be used for getting accurate firmware version information.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230322092713.6961-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the preferred form of branch-and-link for finding the current
address so objtool doesn't think it is an unannotated intra-function
call.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230407040924.231023-1-npiggin@gmail.com
This reverts commit baf7cbd94b.
There are some duplicate cache attributes populations executed
in both ci_leaf_init() and later cache_setup_properties().
Revert the commit baf7cbd94b ("riscv: Set more data to cacheinfo")
to setup only the level and type attributes at this early place.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230308064734.512457-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All callers of pci_bridge_wait_for_secondary_bus() supply a timeout of
PCIE_RESET_READY_POLL_MS, so drop the parameter. Move the definition of
PCIE_RESET_READY_POLL_MS into pci.c, the only user.
[bhelgaas: extracted from
https://lore.kernel.org/r/20230404052714.51315-3-mika.westerberg@linux.intel.com]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCIe r6.0 sec 6.6.1 prescribes that a device must be able to respond to
config requests within 1.0 s (PCI_RESET_WAIT) after exiting conventional
reset and this same delay is prescribed when coming out of D3cold (as that
involves reset too).
A device that requires more than 1 second to initialize after reset may
respond to config requests with Request Retry Status completions (sec
2.3.1), and we accommodate that in Linux with a 60 second cap
(PCIE_RESET_READY_POLL_MS).
Previously we waited up to PCIE_RESET_READY_POLL_MS only in the reset code
path, not in the resume path. However, a device has surfaced, namely Intel
Titan Ridge xHCI, which requires a longer delay also in the resume code
path.
Make the resume code path to use this same extended delay as the reset
path.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216728
Link: https://lore.kernel.org/r/20230404052714.51315-2-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
