When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
[1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
The "compatible" doesn't match what the kernel is using. Fix it as
kernel using.
Fixes: 6b2748ada2 ("dt-bindings: interrupt-controller: add yaml for LoongArch CPU interrupt controller")
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20221208020954.GA3368836-robh@kernel.org/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Link: https://lore.kernel.org/r/20230401091304.12633-1-liupeibao@loongson.cn
[robh: Rename file to match compatible, fix subject typo]
Signed-off-by: Rob Herring <robh@kernel.org>
The code defaulting to the parents fwnode if no fwnode was assigned
is unnecessarily convoluted, probably due to refactoring. Simplify
it and make it more human-readable.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The idi48 regmap can be used in an interrupt context by regmap-irq. To
prevent a deadlock, enable use_raw_spinlock for idi48_regmap_config.
Fixes: e28432a773 ("gpio: 104-idi-48: Migrate to the regmap-irq API")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The dio48e regmap can be used in an interrupt context by regmap-irq. To
prevent a deadlock, enable use_raw_spinlock for dio48e_regmap_config.
Fixes: 2f7e845f51 ("gpio: 104-dio-48e: Migrate to the regmap-irq API")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=2gjK
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Provide pci_msix_can_alloc_dyn() stub when CONFIG_PCI_MSI unset to
avoid build errors (Reinette Chatre)
- Quirk AMD XHCI controller that loses MSI-X state in D3hot to avoid
broken USB after hotplug or suspend/resume (Basavaraj Natikar)
- Fix use-after-free in pci_bus_release_domain_nr() (Rob Herring)
* tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()
After the recent backlight changes acpi_video# backlight devices are only
registered when explicitly requested from the cmdline, by DMI quirk or by
the GPU driver.
This means that we no longer get false-positive backlight control support
advertised on desktop boards.
Remove the 3 DMI quirks for desktop boards where the false-positive issue
was fixed through quirks before. Note many more desktop boards were
affected but we never build a full quirk list for this.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default"), the delayed registering of
acpi_video# backlight devices has been disabled by default.
The few bugreports where this option was used as a workaround were all
cases where the GPU driver did not call acpi_video_register_backlight()
and the workaround was to pass video.register_backlight_delay=1.
With the recent "ACPI: video: Make acpi_backlight=video work independent
from GPU driver" changes acpi_backlight=video can be used to achieve
the same result. So there is no need for the register_backlight_delay
option + code anymore.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the ASUS ExpertBook B2502CBA and various ASUS Vivobook laptops, the
ASUS ExpertBook B1502CBA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CBA_B1502CBA/B1502CBA, BIOS B1502CBA.300 01/18/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217323
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
smatch reports
drivers/cpufreq/amd-pstate.c:907:25: warning: symbol
'mode_state_machine' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series adds the core support to handle the recently updated
HDaudio multi-link support to hanlde non HDA links, like SoundWire/DMIC/SSP on
Intel platform.
For details, please see the first patch which documents the current mlink
support (introduced at Skylake) and the new extensions, arriving with LNL.
There is no change in functionality for existing HDA support, the extension is
backwards compatible with existing implementations.
amd_pstate mode can be changed by writing the mode name to the `status`
sysfs. But some combinations are not working. Fix this issue by taking
care of the edge cases.
Before the fix the mode change combination test fails:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test failed: 1, From mode: disable, to mode: passive
Test failed: 1, From mode: disable, to mode: active
Test failed: 1, From mode: passive, to mode: active
Test passed: from: passive, to disable
Test failed: 1, From mode: passive, to mode: passive
Test failed: 1, From mode: passive, to mode: active
Test failed: 1, From mode: active, to mode: active
Test passed: from: active, to disable
Test failed: 1, From mode: active, to mode: passive
Test failed: 1, From mode: active, to mode: active
After the fix test passes:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test passed: from: disable, to passive
Test passed: from: disable, to active
Test passed: from: passive, to active
Test passed: from: passive, to disable
Test passed: from: passive, to passive
Test passed: from: passive, to active
Test passed: from: active, to active
Test passed: from: active, to disable
Test passed: from: active, to passive
Test passed: from: active, to active
Fixes: abd61c08ef ("cpufreq: amd-pstate: add driver working mode switch support")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=WIDR
-----END PGP SIGNATURE-----
Merge tag 'for-6.3-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix fast checksum detection, this affects filesystems with non-crc32c
checksum, calculation would not be offloaded to worker threads
- restore thread_pool mount option behaviour for endio workers, the new
value for maximum active threads would not be set to the actual work
queues
* tag 'for-6.3-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix fast csum implementation detection
btrfs: restore the thread_pool= behavior in remount for the end I/O workqueues
Adding verifier test for accessing u32 pointer argument in
tracing programs.
The test program loads 1nd argument of bpf_fentry_test9 function
which is u32 pointer and checks that verifier allows that.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-3-zhoufeng.zf@bytedance.com
When tracing a kernel function with arg type is u32*, btf_ctx_access()
would report error: arg2 type INT is not a struct.
The commit bb6728d756 ("bpf: Allow access to int pointer arguments
in tracing programs") added support for int pointer, but did not skip
modifiers before checking it's type. This patch fixes it.
Fixes: bb6728d756 ("bpf: Allow access to int pointer arguments in tracing programs")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-2-zhoufeng.zf@bytedance.com
In commit 031495635b ("arm64: Do not defer reserve_crashkernel() for
platforms with no DMA memory zones"), reserve_crashkernel() is called
much earlier in arm64_memblock_init() to avoid causing base apge
mapping on platforms with no DMA meomry zones.
With taking off protection on crashkernel memory region, no need to call
reserve_crashkernel() specially in advance. The deferred invocation of
reserve_crashkernel() in bootmem_init() can cover all cases. So revert
the whole commit now.
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230407011507.17572-4-bhe@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
After taking off the protection functions on crashkernel memory region,
there's no need to map crashkernel region with page granularity during
linear mapping.
With this change, the system can make use of block or section mapping
on linear region to largely improve perforcemence during system bootup
and running.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230407011507.17572-3-bhe@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Problem:
=======
On arm64, block and section mapping is supported to build page tables.
However, currently it enforces to take base page mapping for the whole
linear mapping if CONFIG_ZONE_DMA or CONFIG_ZONE_DMA32 is enabled and
crashkernel kernel parameter is set. This will cause longer time of the
linear mapping process during bootup and severe performance degradation
during running time.
Root cause:
==========
On arm64, crashkernel reservation relies on knowing the upper limit of
low memory zone because it needs to reserve memory in the zone so that
devices' DMA addressing in kdump kernel can be satisfied. However, the
upper limit of low memory on arm64 is variant. And the upper limit can
only be decided late till bootmem_init() is called [1].
And we need to map the crashkernel region with base page granularity when
doing linear mapping, because kdump needs to protect the crashkernel region
via set_memory_valid(,0) after kdump kernel loading. However, arm64 doesn't
support well on splitting the built block or section mapping due to some
cpu reststriction [2]. And unfortunately, the linear mapping is done before
bootmem_init().
To resolve the above conflict on arm64, the compromise is enforcing to
take base page mapping for the entire linear mapping if crashkernel is
set, and CONFIG_ZONE_DMA or CONFIG_ZONE_DMA32 is enabed. Hence
performance is sacrificed.
Solution:
=========
Comparing with the base page mapping for the whole linear region, it's
better to take off the protection on crashkernel memory region for the
time being because the anticipated stamping on crashkernel memory region
could only happen in a chance in one million, while the base page mapping
for the whole linear region is mitigating arm64 systems with crashkernel
set always.
[1]
https://lore.kernel.org/all/YrIIJkhKWSuAqkCx@arm.com/T/#u
[2]
https://lore.kernel.org/linux-arm-kernel/20190911182546.17094-1-nsaenzjulienne@suse.de/T/
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230407011507.17572-2-bhe@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
In 2013, commits
2e35afaefe ("PCI: pciehp: Add reset_slot() method")
608c388122 ("PCI: Add slot reset option to pci_dev_reset()")
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d06 ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
pciehp_ist() # down_read(reset_lock)
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
__pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
pci_stop_and_remove_bus_device()
pci_stop_bus_device()
pci_stop_dev()
device_release_driver()
device_release_driver_internal()
__device_driver_lock() # device_lock()
SYS_munmap()
vfio_device_fops_release()
vfio_device_group_close()
vfio_device_close()
vfio_device_last_close()
vfio_pci_core_close_device()
vfio_pci_core_disable() # device_lock()
__pci_reset_function_locked()
pci_reset_bus_function()
pci_dev_reset_slot_function()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:
aer_recover_work_func()
pcie_do_recovery()
aer_root_reset()
pci_bus_error_reset()
pci_slot_reset()
pci_slot_lock() # device_lock()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d06 ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Some generic COMPAT definitions have been consolidated in
asm-generic/compat.h by commit 84a0c977ab
("asm-generic: compat: Cleanup duplicate definitions")
Remove those that are already defined to the same value there from
arm64 asm/compat.h.
Signed-off-by: Teo Couprie Diaz <teo.coupriediaz@arm.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230314140038.252908-1-teo.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
On Google Coral and Reef family Chromebooks with Intel Apollo Lake SoC,
firmware clobbers the header of the L1 PM Substates capability and the
previous capability when returning from D3cold to D0.
Save those headers at enumeration-time and restore them at resume.
[bhelgaas: The main benefit is to make the lspci output after resume
correct. Apparently there's little or no effect on power consumption.]
Link: https://lore.kernel.org/linux-pci/CAFJ_xbq0cxcH-cgpXLU4Mjk30+muWyWm1aUZGK7iG53yaLBaQg@mail.gmail.com/T/#u
Link: https://lore.kernel.org/r/20230411160213.4453-1-ron.lee@intel.com
Signed-off-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Today the fixmap code largely maps elements at PAGE_SIZE granularity,
but we special-case the FDT mapping such that it can be mapped with 2M
block mappings when 4K pages are in use. The original rationale for this
was simplicity, but it has some unfortunate side-effects, and
complicates portions of the fixmap code (i.e. is not so simple after
all).
The FDT can be up to 2M in size but is only required to have 8-byte
alignment, and so it may straddle a 2M boundary. Thus when using 2M
block mappings we may map up to 4M of memory surrounding the FDT. This
is unfortunate as most of that memory will be unrelated to the FDT, and
any pages which happen to share a 2M block with the FDT will by mapped
with Normal Write-Back Cacheable attributes, which might not be what we
want elsewhere (e.g. for carve-outs using Non-Cacheable attributes).
The logic to handle mapping the FDT with 2M blocks requires some special
cases in the fixmap code, and ties it to the early page table
configuration by virtue of the SWAPPER_TABLE_SHIFT and
SWAPPER_BLOCK_SIZE constants used to determine the granularity used to
map the FDT.
This patch simplifies the FDT logic and removes the unnecessary mappings
of surrounding pages by always mapping the FDT at page granularity as
with all other fixmap mappings. To do so we statically reserve multiple
PTE tables to cover the fixmap VA range. Since the FDT can be at most
2M, for 4K pages we only need to allocate a single additional PTE table,
and for 16K and 64K pages the existing single PTE table is sufficient.
The PTE table allocation scales with the number of slots reserved in the
fixmap, and so this also makes it easier to add more fixmap entries if
we require those in future.
Our VA layout means that the fixmap will always fall within a single PMD
table (and consequently, within a single PUD/P4D/PGD entry), which we
can verify at compile time with a static_assert(). With that assert a
number of runtime warnings become impossible, and are removed.
I've boot-tested this patch with both 4K and 64K pages.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20230406152759.4164229-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Over time, arm64's mm/mmu.c has become increasingly large and painful to
navigate. Move the fixmap code to its own file where it can be understood in
isolation.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20230406152759.4164229-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently arm64's FIXADDR_{START,SIZE} definitions only cover the
runtime fixmap slots (and not the boot-time fixmap slots), but the code
for creating the fixmap assumes that these definitions cover the entire
fixmap range. This means that the ptdump boundaries are reported in a
misleading way, missing the VA region of the runtime slots. In theory
this could also cause the fixmap creation to go wrong if the boot-time
fixmap slots end up spilling into a separate PMD entry, though luckily
this is not currently the case in any configuration.
While it seems like we could extend FIXADDR_{START,SIZE} to cover the
entire fixmap area, core code relies upon these *only* covering the
runtime slots. For example, fix_to_virt() and virt_to_fix() try to
reject manipulation of the boot-time slots based upon
FIXADDR_{START,SIZE}, while __fix_to_virt() and __virt_to_fix() can
handle any fixmap slot.
This patch follows the lead of x86 in commit:
55f49fcb87 ("x86/mm: Fix overlap of i386 CPU_ENTRY_AREA with FIX_BTMAP")
... and add new FIXADDR_TOT_{START,SIZE} definitions which cover the
entire fixmap area, using these for the fixmap creation and ptdump code.
As the boot-time fixmap slots are now rejected by fix_to_virt(),
the early_fixmap_init() code is changed to consistently use
__fix_to_virt(), as it already does in a few cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20230406152759.4164229-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
clang with W=1 reports
drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c:56:35: error:
unused function 'vmw_overlay' [-Werror,-Wunused-function]
static inline struct vmw_overlay *vmw_overlay(struct drm_device *dev)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321182414.1826372-1-trix@redhat.com
The arm64 stacktrace code can be used in kprobe context, and so cannot
be safely probed. Some (but not all) of the unwind functions are
annotated with `NOKPROBE_SYMBOL()` to ensure this, with others markes as
`__always_inline`, relying on the top-level unwind function being marked
as `noinstr`.
This patch has stacktrace.c consistently mark the internal stacktrace
functions as `__always_inline`, removing the need for NOKPROBE_SYMBOL()
as the top-level unwind function (arch_stack_walk()) is marked as
`noinstr`. This is more consistent and is a simpler pattern to follow
for future additions to stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
For historical reasons, the backtrace dumping functions are placed in
the middle of stacktrace.c, despite using functions defined later. For
clarity, and to make subsequent refactoring easier, move the dumping
functions to the end of stacktrace.c
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The function which calls the top-level backtracing function may have
been instrumented with ftrace and/or kprobes, and hence the first return
address may have been rewritten.
Factor out the existing fgraph / kretprobes address recovery, and use
this for the first address. As the comment for the fgraph case isn't all
that helpful, I've also dropped that.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Check both architectural rules and KVM's ABI for KVM_GET_SUPPORTED_CPUID
to ensure the supported xfeatures[1] don't violate any of them.
The architectural rules[2] and KVM's contract with userspace ensure for a
given feature, e.g. sse, avx, amx, etc... their associated xfeatures are
either all sets or none of them are set, and any dependencies are enabled
if needed.
[1] EDX:EAX of CPUID.(EAX=0DH,ECX=0)
[2] SDM vol 1, 13.3 ENABLING THE XSAVE FEATURE SET AND XSAVE-ENABLED
FEATURES
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: expand comments, use a fancy X86_PROPERTY]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add all known XFEATURE masks to processor.h to make them more broadly
available in KVM selftests. Relocate and clean up the exiting AMX (XTILE)
defines in processor.h, e.g. drop the intermediate define and use BIT_ULL.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The instructions XGETBV and XSETBV are useful to other tests. Move
them to processor.h to make them more broadly available.
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
[sean: reword shortlog]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Filter out XTILE_CFG from the supported XCR0 reported to userspace if the
current process doesn't have access to XTILE_DATA. Attempting to set
XTILE_CFG in XCR0 will #GP if XTILE_DATA is also not set, and so keeping
XTILE_CFG as supported results in explosions if userspace feeds
KVM_GET_SUPPORTED_CPUID back into KVM and the guest doesn't sanity check
CPUID.
Fixes: 445ecdf79b ("kvm: x86: Exclude unpermitted xfeatures at KVM_GET_SUPPORTED_CPUID")
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper, kvm_get_filtered_xcr0(), to dedup code that needs to account
for XCR0 features that require explicit opt-in on a per-process basis. In
addition to documenting when KVM should/shouldn't consult
xstate_get_guest_group_perm(), the helper will also allow sanitizing the
filtered XCR0 to avoid enumerating architecturally illegal XCR0 values,
e.g. XTILE_CFG without XTILE_DATA.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
[sean: rename helper, move to x86.h, massage changelog]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* mtdblock: Tolerate corrected bit-flips
Raw NAND fixes:
* meson: Fix bitmask for length in command word
* stm32_fmc2:
- Remove unsupported EDO mode
- Use timings.mode instead of checking tRC_min
The first patch is the real fix but nowadays we use timings.mode
instead of bare timings, so in order to ease the backports, the fix
was split into two steps, the first one easy to backport on older
kernels, the second one just as a follow-up so recent stable kernels
would look like the mainline.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmQ1ZacACgkQJWrqGEe9
VoQRgQf/Z2ve46RPn4og3TZxLKeFPV7Z7kNSaq5lFsqBWMXw2wCZu1ozOs2EGqUL
tmGNjk/EiOuXWiBO+PolDBQgLApPkiCSjDKsPSNxgrCuefKUC81MzVbUvtF1HnTa
JIXL+g9L4c3rYr7eyDe7NXTdQwGuIof5Z9E8WN9Ng4p6XXhTHplrTI1sb4pHZT7k
PagIGn4aQ+zEZzvQFi5R00WOSljBqH4fdYzfD5b1mASq7uPFwGv8mtjE1oTl+IO1
5BWGMKWb1gpSwowzajlNs5VtCHzc9f0sO5eQPNV2p5FN3W9xCZeW4mknfeY2JH7x
nqLcXbQKlSTH9Dcy8G7owDCnZ7Vvog==
=lGrd
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Core fix:
- mtdblock: Tolerate corrected bit-flips
Raw NAND fixes:
- meson: Fix bitmask for length in command word
- stm32_fmc2:
- Remove unsupported EDO mode
- Use timings.mode instead of checking tRC_min.
The first patch is the real fix but nowadays we use
timings.mode instead of bare timings, so in order to ease the
backports, the fix was split into two steps, the first one easy
to backport on older kernels, the second one just as a
follow-up so recent stable kernels would look like the
mainline"
* tag 'mtd/fixes-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: meson: fix bitmask for length in command word
mtdblock: tolerate corrected bit-flips
mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min
mtd: rawnand: stm32_fmc2: remove unsupported EDO mode
The NFS specific trace points are no longer needed as tracing is well
covered by netfs and fscache.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The old NFSIOS_FSCACHE counters are no longer accurate or useful with
the conversion to the new netfs API. The new API does not have a page
based interface, and so the counters in nfs_stat_fscachecounters are
no longer obtainable. The new netfs the API has extensive statistics
inside /proc/fs/fscache/stats so we no longer need NFS specific fscache
stats.
Note this also removes the 'fsc:' line from /proc/self/mountstats so
it will be a user-visible change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Convert the NFS buffered read code paths to corresponding netfs APIs,
but only when fscache is configured and enabled.
The netfs API defines struct netfs_request_ops which must be filled
in by the network filesystem. For NFS, we only need to define 5 of
the functions, the main one being the issue_read() function.
The issue_read() function is called by the netfs layer when a read
cannot be fulfilled locally, and must be sent to the server (either
the cache is not active, or it is active but the data is not available).
Once the read from the server is complete, netfs requires a call to
netfs_subreq_terminated() which conveys either how many bytes were read
successfully, or an error. Note that issue_read() is called with a
structure, netfs_io_subrequest, which defines the IO requested, and
contains a start and a length (both in bytes), and assumes the underlying
netfs will return a either an error on the whole region, or the number
of bytes successfully read.
The NFS IO path is page based and the main APIs are the pgio APIs defined
in pagelist.c. For the pgio APIs, there is no way for the caller to
know how many RPCs will be sent and how the pages will be broken up
into underlying RPCs, each of which will have their own completion and
return code. In contrast, netfs is subrequest based, a single
subrequest may contain multiple pages, and a single subrequest is
initiated with issue_read() and terminated with netfs_subreq_terminated().
Thus, to utilze the netfs APIs, NFS needs some way to accommodate
the netfs API requirement on the single response to the whole
subrequest, while also minimizing disruptive changes to the NFS
pgio layer.
The approach taken with this patch is to allocate a small structure
for each nfs_netfs_issue_read() call, store the final error and number
of bytes successfully transferred in the structure, and update these values
as each RPC completes. The refcount on the structure is used as a marker
for the last RPC completion, is incremented in nfs_netfs_read_initiate(),
and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header
contains a valid pointer to the data. On the final put (which signals
the final outstanding RPC is complete) in nfs_netfs_read_completion(),
call netfs_subreq_terminated() with either the final error value (if
one or more READs complete with an error) or the number of bytes
successfully transferred (if all RPCs complete successfully). Note
that when all RPCs complete successfully, the number of bytes transferred
is capped to the length of the subrequest. Capping the transferred length
to the subrequest length prevents "Subreq overread" warnings from netfs.
This is due to the "aligned_len" in nfs_pageio_add_page(), and the
corner case where NFS requests a full page at the end of the file,
even when i_size reflects only a partial page (NFS overread).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Following recent refactorings, the get_ftrace_plt function only ever
gets called with addr = FTRACE_ADDR so its code can be simplified to
always return the ftrace trampoline plt.
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230405180250.2046566-3-revest@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
This builds up on the CALL_OPS work which extends the ftrace patchsite
on arm64 with an ops pointer usable by the ftrace trampoline.
This ops pointer is valid at all time. Indeed, it is either pointing to
ftrace_list_ops or to the single ops which should be called from that
patchsite.
There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function:
- If the direct called trampoline is within the reach of a BL
instruction
-> the ftrace patchsite jumps to the trampoline
- Else
-> the ftrace patchsite jumps to the ftrace_caller trampoline which
reads the ops pointer in the patchsite and jumps to the direct
call address stored in the ops
- Else
-> the ftrace patchsite jumps to the ftrace_caller trampoline and its
ops literal points to ftrace_list_ops so it iterates over all
registered ftrace ops, including the direct call ops and calls its
call_direct_funcs handler which stores the direct called
trampoline's address in the ftrace_regs and the ftrace_caller
trampoline will return to that address instead of returning to the
traced function
Signed-off-by: Florent Revest <revest@chromium.org>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230405180250.2046566-2-revest@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
Updates to the direct trampoline to allow ARM64 to have direct
trampolines.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZB0DaRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qghhAP9ESIvWQxjMFu6ZuiKLeWd1O96cWPgD
5YhoqxkDs3i45AD/RuOaAznydxP1Dj/S57s+BsvoA8adCDxjZ0ukPp18aAU=
=RRuE
-----END PGP SIGNATURE-----
Merge tag 'trace-direct-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace into for-next/ftrace
Pull in ftrace trampoline updates from Steve so that we can implement
support for direct calls for arm64 on top:
tracing: Direct trampoline updates
Updates to the direct trampoline to allow ARM64 to have direct
trampolines.
As first steps for support of the netfs library when NFS_FSCACHE is
configured, add NETFS_SUPPORT to Kconfig and add the required netfs_inode
into struct nfs_inode.
Using netfs requires we move the VFS inode structure to be stored
inside struct netfs_inode, along with the fscache_cookie.
Thus, if NFS_FSCACHE is configured, place netfs_inode inside an
anonymous union so the vfs_inode memory is the same and we do
not need to modify other non-fscache areas of NFS.
In addition, inside the NFS fscache code, use the new helpers,
netfs_inode() and netfs_i_cookie() helpers, and remove our own
helper, nfs_i_fscache().
Later patches will convert NFS fscache to fully use netfs.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Rename readpage_async_filler to nfs_read_add_folio to
better reflect what this function does (add a folio to
the nfs_pageio_descriptor), and simplify arguments to
this function by removing struct nfs_readdesc.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Also dev_err_probe message require a trailing \n.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document the firmware file names for CCS static data for CCS, SMIA++ and
SMIA devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames
compared to older 8-bit identifier used by SMIA. The requested firmware
files used the MIPI manufacturer ID even for SMIA compliant devices,
effectively making the manufacturer ID 0.
While CCS static data is a feature of CCS 1.1, it has no hardware
dependencies. Making this feature available for SMIA devices helps adding
support for them and avoids requesting ill-generated CCS static data file
names. The files are named as:
ccs/smiapp-module-vv-mmmm-rrrr.fw,
ccs/smiapp-sensor-vv-mmmm-rr.fw and
ccs/smia-sensor-vv-mmmm-rr.fw
where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is
the revision number.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some modules don't have any model identification information in the
register address space. The driver as a SMIA++ driver attempted to use
sensor information in this case. This workaround is definitely not for CCS
devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Read 16-bit sensor revision number if the 8-bit register has value 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
