During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.
Since commit 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.
This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.
This patch attempts a different solution for the problem 6e6de3dee5
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee5 (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.
This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.
[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/
Fixes: 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY88euhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+yQAP4wWnC29X3t6kQC4+T2hlw+MOuZBdfd
dm70qTNd6itL7QD8DToDCGm6gt6IqunjIllUBGfEU2oyeKU5MT7SVITfnAo=
=4W3N
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity MAINTAINERS entry update from Eric Biggers:
"Update the MAINTAINERS file entry for fsverity"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
MAINTAINERS: update fsverity git repo, list, and patchwork
The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.
1. SCMI unified userspace interface
This is to have a unified way of testing an SCMI platform firmware
implementation for compliance, fuzzing etc., from the perspective of
the non-secure OSPM irrespective of the underlying transport supporting
SCMI. It is just for testing/development and not a feature intended fo
use in production.
Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
messages using the mailbox test driver only which makes it transport
specific and can't be used with any other transport like virtio,
smc/hvc, optee, etc. Also the shared memory can be transport specific
and it is better to even abstract/hide those details while providing
the userspace access. So in order to scale with any transport, we need
a unified interface for the same.
In order to achieve that, SCMI "raw mode support" is being added through
debugfs which is more configurable as well. A userspace application
can inject bare SCMI binary messages into the SCMI core stack; such
messages will be routed by the SCMI regular kernel stack to the backend
platform firmware using the configured transport transparently. This
eliminates the to know about the specific underlying transport
internals that will be taken care of by the SCMI core stack itself.
Further no additional changes needed in the device tree like in the
mailbox-test driver.
[1] https://gitlab.arm.com/tests/scmi-tests
2. Refactoring of the SCMI stack probing sequence
On some platforms, SCMI transport can be provide by OPTEE/TEE which
introduces certain dependency in the probe ordering. In order to address
the same, the SCMI bus is split into its own module which continues to
be initialized at subsys_initcall, while the SCMI core stack, including
its various transport backends (like optee, mailbox, virtio, smc), is
now moved into a separate module at module_init level.
This allows the other possibly dependent subsystems to register and/or
access SCMI bus well before the core SCMI stack and its dependent
transport backends.
-----BEGIN PGP SIGNATURE-----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=yLSu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jvm3
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.3
The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.
1. SCMI unified userspace interface
This is to have a unified way of testing an SCMI platform firmware
implementation for compliance, fuzzing etc., from the perspective of
the non-secure OSPM irrespective of the underlying transport supporting
SCMI. It is just for testing/development and not a feature intended fo
use in production.
Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
messages using the mailbox test driver only which makes it transport
specific and can't be used with any other transport like virtio,
smc/hvc, optee, etc. Also the shared memory can be transport specific
and it is better to even abstract/hide those details while providing
the userspace access. So in order to scale with any transport, we need
a unified interface for the same.
In order to achieve that, SCMI "raw mode support" is being added through
debugfs which is more configurable as well. A userspace application
can inject bare SCMI binary messages into the SCMI core stack; such
messages will be routed by the SCMI regular kernel stack to the backend
platform firmware using the configured transport transparently. This
eliminates the to know about the specific underlying transport
internals that will be taken care of by the SCMI core stack itself.
Further no additional changes needed in the device tree like in the
mailbox-test driver.
[1] https://gitlab.arm.com/tests/scmi-tests
2. Refactoring of the SCMI stack probing sequence
On some platforms, SCMI transport can be provide by OPTEE/TEE which
introduces certain dependency in the probe ordering. In order to address
the same, the SCMI bus is split into its own module which continues to
be initialized at subsys_initcall, while the SCMI core stack, including
its various transport backends (like optee, mailbox, virtio, smc), is
now moved into a separate module at module_init level.
This allows the other possibly dependent subsystems to register and/or
access SCMI bus well before the core SCMI stack and its dependent
transport backends.
* tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
firmware: arm_scmi: Clarify raw per-channel ABI documentation
firmware: arm_scmi: Add per-channel raw injection support
firmware: arm_scmi: Add the raw mode co-existence support
firmware: arm_scmi: Call raw mode hooks from the core stack
firmware: arm_scmi: Reject SCMI drivers when configured in raw mode
firmware: arm_scmi: Add debugfs ABI documentation for raw mode
firmware: arm_scmi: Add core raw transmission support
firmware: arm_scmi: Add debugfs ABI documentation for common entries
firmware: arm_scmi: Populate a common SCMI debugfs root
debugfs: Export debugfs_create_str symbol
include: trace: Add platform and channel instance references
firmware: arm_scmi: Add internal platform/channel identifiers
firmware: arm_scmi: Move errors defs and code to common.h
firmware: arm_scmi: Add xfer helpers to provide raw access
firmware: arm_scmi: Add flags field to xfer
firmware: arm_scmi: Refactor scmi_wait_for_message_response
firmware: arm_scmi: Refactor polling helpers
firmware: arm_scmi: Refactor xfer in-flight registration routines
firmware: arm_scmi: Split bus and driver into distinct modules
firmware: arm_scmi: Introduce a new lifecycle for protocol devices
...
Link: https://lore.kernel.org/r/20230120162152.1438456-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All these platforms are ARMv8 or newer and choosing the platforms in
menuconfig is much easier if the titles start with something specific.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120125722.270722-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit f3bbac3247 ("ext4: deal with legacy signed xattr name hash
values") added a hashing function for the legacy case of having the
xattr hash calculated using a signed 'char' type. It left the unsigned
case alone, since it's all implicitly handled by the '-funsigned-char'
compiler option.
However, there's been some noise about back-porting it all into stable
kernels that lack the '-funsigned-char', so let's just make that at
least possible by making the whole 'this uses unsigned char' very
explicit in the code itself. Whether such a back-port is really
warranted or not, I'll leave to others, but at least together with this
change it is technically sensible.
Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this
hash calculation has changed" issue. Hopefully it never triggers except
for that xfstests generic/454 test-case, but even if it does it's just
good information to have.
If for no other reason than "we can remove the legacy signed hash code
entirely if nobody ever sees the message any more".
Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One non-urgent change to use platform_device_put() instead of
platform_device_unregister().
-----BEGIN PGP SIGNATURE-----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=C0Tt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BAMH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.3/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
One clean-up for omap1 for v6.3
One non-urgent change to use platform_device_put() instead of
platform_device_unregister().
* tag 'omap-for-v6.3/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
Link: https://lore.kernel.org/r/pull-1674566532-427457@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Non-urgent fixes for missing of_node_put() and clk_put(), drop few
unnecessary includes, and fix a typo. None of these are urgent and
can be merged along with other clean-up when suitable.
-----BEGIN PGP SIGNATURE-----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=9VPI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ib7d
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.3/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Clean-up for omaps for v6.3
Non-urgent fixes for missing of_node_put() and clk_put(), drop few
unnecessary includes, and fix a typo. None of these are urgent and
can be merged along with other clean-up when suitable.
* tag 'omap-for-v6.3/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP2+: Fix memory leak in realtime_counter_init()
ARM: OMAP2+: omap4-common: Fix refcount leak bug
Link: https://lore.kernel.org/r/pull-1674566471-434733@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes: 5fbf7f27fa ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal framework gives the possibility to register the trip
points along with the thermal zone. When that is done, no get_trip_*
callbacks are needed and they can be removed.
Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.
In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* thermal: (734 commits)
thermal: core: call put_device() only after device_register() fails
Linux 6.2-rc4
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
kallsyms: Fix scheduling with interrupts disabled in self-test
ata: pata_cs5535: Don't build on UML
lockref: stop doing cpu_relax in the cmpxchg loop
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
efi: tpm: Avoid READ_ONCE() for accessing the event log
io_uring: lock overflowing for IOPOLL
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
...
The new DMC release for ADLP (v2.18) in linux-firmware adopted the new
convention of using unversioned filenames, so update the driver code for
that new release. Keep the latest versioned path as fallback so we do
not cause regressions.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123182021.31239-3-gustavo.sousa@intel.com
New DMC releases in linux-firmware will stop using version number in
blob filenames. This new convention provides the following benefits:
1. It simplifies code maintenance, as new DMC releases for a platform
using the new convention will always use the same filename for the
blob.
2. It allows DMC to be loaded even if the target system does not have
the most recent firmware installed.
Prepare the driver by:
- Using the new convention for DMC_PATH() and renaming the currently
used one to make it clear it is for the legacy scheme.
- Implementing a fallback mechanism for future transitions from
versioned to unversioned paths so that we do not cause a regression
for systems not having the most up-to-date linux-firmware files.
v2:
- Keep using request_firmware() instead of firmware_request_nowarn().
(Jani)
v3:
- Keep current DMC paths instead of directly using unversioned ones,
so that we do not disturb initrd generation.
(Lucas, Rodrigo)
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123182021.31239-2-gustavo.sousa@intel.com
Lets not open code device_unregister() unnecessarily.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
thermal_release() already frees cdev, let it do rest of the cleanup as
well in order to simplify the error paths in
__thermal_cooling_device_register().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The nvme device may have a namespace with the root partition, so make
sure we've completed scanning before returning from the async probe.
Fixes: eac3ef2629 ("nvme-pci: split the initial probe from the rest path")
Reported-by: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The usage of memcpy() affects the representation of the VDOs as they are
copied to the EC Host Command buffer. Specifically, all higher order
bits get dropped (for example: a VDO of 0x406 just gets copied as 0x6).
Avoid this by explicitly copying each VDO in the array. The number of
VDOs generated by alternate mode drivers in their VDMs is almost always
just 1 (apart from the header) so this doesn't affect performance in a
meaningful way).
Fixes: 40a9b13a09 ("platform/chrome: cros_typec_vdm: Add VDM send support")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20230113182626.1149539-1-pmalani@chromium.org
Signed-off-by: Prashant Malani <pmalani@chromium.org>
`fwnode_typec_{retimer,mux,switch}_get()` could return `-EPROBE_DEFER`,
which is called from `cros_typec_get_switch_handles`. When this happens,
it does not indicate absence of switches; instead, it only hints that
probing of switches should occur at a later time.
Progagate `-EPROBE_DEFER` to upper layer logic so that they can re-try
probing switches as a better time.
Signed-off-by: Victor Ding <victording@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230124075555.v3.1.I6c0a089123fdf143f94ef4cca8677639031856cf@changeid
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Avoid type casts that are needed for IS_ERR() and use
IS_ERR_VALUE() instead.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211161718436948912@zte.com.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move VMX's handling of NMI VM-Exits into vmx_vcpu_enter_exit() so that
the NMI is handled prior to leaving the safety of noinstr. Handling the
NMI after leaving noinstr exposes the kernel to potential ordering
problems as an instrumentation-induced fault, e.g. #DB, #BP, #PF, etc.
will unblock NMIs when IRETing back to the faulting instruction.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split the asm subroutines for handling NMIs versus IRQs that occur in the
guest so that the NMI handler can be called from a noinstr section. As a
bonus, the NMI path doesn't need an indirect branch.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use a dedicated entry for invoking the NMI handler from KVM VMX's VM-Exit
path for 32-bit even though using a dedicated entry for 32-bit isn't
strictly necessary. Exposing a single symbol will allow KVM to reference
the entry point in assembly code without having to resort to more #ifdefs
(or #defines). identry.h is intended to be included from asm files only
once, and so simply including idtentry.h in KVM assembly isn't an option.
Bypassing the ESP fixup and CR3 switching in the standard NMI entry code
is safe as KVM always handles NMIs that occur in the guest on a kernel
stack, with a kernel CR3.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tag to_vmx() and to_kvm_vmx() __always_inline as they both just reflect
the passed in pointer (the embedded struct is the first field in the
container), and drop the @vmx param from vmx_vcpu_enter_exit(), which
likely existed purely to make noinstr validation happy.
Amusingly, when the compiler decides to not inline the helpers, e.g. for
KASAN builds, to_vmx() and to_kvm_vmx() may end up pointing at the same
symbol, which generates very confusing objtool warnings. E.g. the use of
to_vmx() in a future patch led to objtool complaining about to_kvm_vmx(),
and only once all use of to_kvm_vmx() was commented out did to_vmx() pop
up in the obj tool report.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x160: call to to_kvm_vmx()
leaves .noinstr.text section
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tag all evmcs_{read,write}() helpers __always_inline so that they can be
freely used in noinstr sections, e.g. to get the VM-Exit reason in
vcpu_vmx_enter_exit() (in a future patch). For consistency and to avoid
more spot fixes in the future, e.g. see commit 010050a863 ("x86/kvm:
Always inline evmcs_write64()"), tag all accessors even though
evmcs_read32() is the only anticipated use case in the near future. In
practice, non-KASAN builds are all but guaranteed to inline the helpers
anyways.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x107: call to evmcs_read32()
leaves .noinstr.text section
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allow instrumentation in the VM-Fail path of __vmcs_readl() so that the
helper can be used in noinstr functions, e.g. to get the exit reason in
vmx_vcpu_enter_exit() in order to handle NMI VM-Exits in the noinstr
section. While allowing instrumentation isn't technically safe, KVM has
much bigger problems if VMREAD fails in a noinstr section.
Note, all other VMX instructions also allow instrumentation in their
VM-Fail paths for similar reasons, VMREAD was simply omitted by commit
3ebccdf373 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text")
because VMREAD wasn't used in a noinstr section at the time.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an extra special noinstr-friendly helper to test+mark a "register"
available and use it when caching vmcs.EXIT_QUALIFICATION and
vmcs.VM_EXIT_INTR_INFO. Make the caching helpers __always_inline too so
that they can be used in noinstr functions.
A future fix will move VMX's handling of NMI exits into the noinstr
vmx_vcpu_enter_exit() so that the NMI is processed before any kind of
instrumentation can trigger a fault and thus IRET, i.e. so that KVM
doesn't invoke the NMI handler with NMIs enabled.
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221213060912.654668-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This version brings along following fixes:
- Fix timing not changning when freesync video is enabled
- avoid disable otg when dig was disabled
- Properly reuse completion structure
- Pass DSC slice height to PSR FW
- merge dc_link_dp into dc_link
- move dp cts functions from dc_link_dp to link_dp_cts
- move dp irq handler functions from dc_link_dp to link_dp_irq_handler
- Enable AdaptiveSync in DC interface
- adjust MALL size available for DCN32 and DCN321
- Set init freq for DCFCLK DS
- Use |= when assigning wm_optimized_required
- move eDP panel control logic to link_edp_panel_control
- create accessories, hwss and protocols sub folders in link
- Disable SubVP for PSR panels
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig was disabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connecting displays to TBT3 docks often produces invalid
replies for DPIA AUX requests. It turns out the completion
structure was not re-initialized before reusing it, resulting
in immature wake up to completion.
[How]
Properly call reinit_completion() on reused completion structure.
Cc: stable@vger.kernel.org
Reviewed-by: Solomon Chiu <solomon.chiu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DSC is enabled, the PSRSU seletive update region
must be multiple number of DSC slice height number.
The original solution is to overwrite the SU Y granularity
by DSC slice height in DAL driver. However, the size
of the SU Y granularity variable only has 8 bytes
and the DSC slice height may over the 8 bytes size.
[How]
Instead of overwriting the SU Y granularity value,
add a new DSC slice height pararmeter and pass it
to DMUB PSRSU FW. The PSRSU FW will refer to the
DSC slice height value and extend the SU region.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new files link_dp_cts.c and link_dp_cts.h, and move DP cts
functions into them.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new files link_dp_irq_handler.c and link_dp_irq_handler.h, and
move DP irq handler functions into them.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Start enabling AdaptiveSync feature on Linux environment.
[how]
Adding AdaptiveSync support in DC layer
- building AdaptiveSync info_packets
- adjusting the v_startup parameter
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use
[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
allowed instead.
Return corresponding number of channels back and use this to calculate
available MALL size.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Set init frequency for DCFCLK DS
- For now choose 10Mhz after turning off all pipes on init
- DCN32 spreadsheet shows 8Mhz is min for any display config
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Use |= when assigning to wm_optimized required because
we don't want to overwrite the flag in case the optimize
did not happen yet
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new file link_edp_panel_control.c and link_edp_panel_control.h,
and move eDP panel control logic into them.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component contains three sub folders:
accessories - utilities for improving testability, logging or tracing, doesn't impact
end user use cases.
protocols - specs defined protocols used in end user use cases
hwss - hwss owned link_hwss object, served as an abstraction layer in hwss to
access various types of encoder/phy/dpia endpoints in a unified interface.
sooner we will have files directly under link folder one for the implementation of
each major link behavior such as link_create, link_detect, link_validate
and link_set_dpms.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We cannot enable subvp on PSR panels because when
PSR is active, HUBP is turned off and we cannot rely
on the HUBP vline interrupt
- When in PSR, surface data also cannot be prefetched to MALL
because the main HUBP will be off
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- [FW Promotion] Release 0.0.150.0
- Correcting prefetch mode for fast validate
- Set hvm_enabled flag for S/G mode
- set allow_freesync parameter in DM
- Revert "ignore msa parameter only if freesync is enabled"
- Allow idle optimization after turning off all pipes
- Guard Freesync HDMI parsing with dc_lock
- Speed up DML fast_validate path
- Disable MALL SS and messages for PSR supported configs
- force connector state when bpc changes during compliance
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add comments to reserved bit
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AV1 is only supported on the first instance.
Added vcn_v4_0_enc_find_ib_param() to help search for an IB param.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY and HOW]
When fast validating, we should be agnostic to any sort of optimizations
such as supporting Pstate or stutter in Vblank. We should change our
prefetch mode for fast validate to support none of these optimizations.
For example, Valve Index running at 144Hz can only be validated without
any support these optimizations.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After enabling S/G on dcn314 a screen corruption may be observed.
HostVM flag should be set in S/G mode to be included in DML calculations.
[How]
In S/G mode gpu_vm_support flag is set.
Use its value to init is_hvm_enabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
