Convert ID_ISAR0_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-23-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert ID_MMFR4_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-22-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert ID_MMFR3_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-21-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert ID_MMFR2_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-20-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert ID_MMFR1_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-19-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert ID_MMFR0_EL1 to be automatically generated as per DDI0487I.a,
no functional changes.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-18-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
32bit has multiple values for its id registers, as extra properties
were added to the CPUs. Some of these end up having long names, which
exceed the fixed 48 character column that the sysreg awk script generates.
For example, the ID_MMFR1_EL1.L1Hvd field has an encoding whose natural
name would be 'invalidate Iside only'. Using this causes compile errors
as the script generates the following:
#define ID_MMFR1_EL1_L1Hvd_INVALIDATE_ISIDE_ONLYUL(0b0001)
Add a few extra characters.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-17-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the MVFR2_EL1 register use lower-case for feature
names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-16-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the MVFR1_EL1 register use lower-case for feature
names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-15-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the MVFR0_EL1 register use lower-case for feature
names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-14-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_DFR1_EL1 register have an _EL1 suffix.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-13-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_DFR0_EL1 register have an _EL1 suffix,
and use lower-case for feature names where the arm-arm does the same.
The arm-arm has feature names for some of the ID_DFR0_EL1.PerMon encodings.
Use these feature names in preference to the '8_4' indication of the
architecture version they were introduced in.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-12-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_PFR2_EL1 register have an _EL1 suffix.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-11-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_PFR1_EL1 register have an _EL1 suffix,
and use lower case in feature names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-10-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_PFR0_EL1 register have an _EL1 suffix,
and use lower case in feature names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-9-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_ISAR6_EL1 register have an _EL1 suffix.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-8-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_ISAR5_EL1 register have an _EL1 suffix.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-7-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_ISAR4_EL1 register have an _EL1 suffix,
and use lower-case for feature names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-6-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_ISAR0_EL1 register have an _EL1 suffix,
and use lower-case for feature names where the arm-arm does the same.
To functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-5-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_MMFR5_EL1 register have an _EL1 suffix.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-4-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates.
Ensure symbols for the ID_MMFR4_EL1 register have an _EL1 suffix,
and use lower case in feature names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
To convert the 32bit id registers to use the sysreg generation, they
must first have a regular pattern, to match the symbols the script
generates. The scripts would like to follow exactly what is in the
arm-arm, which uses lower case for some of these feature names.
Ensure symbols for the ID_MMFR0_EL1 register have an _EL1 suffix,
and use lower case in feature names where the arm-arm does the same.
No functional change.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20221130171637.718182-2-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This is consistent with the other comments in the struct.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221116170335.2341003-3-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
FF-A function IDs and error codes will be needed in the hypervisor too,
so move to them to the header file where they can be shared. Rename the
version constants with an "FFA_" prefix so that they are less likely
to clash with other code in the tree.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221116170335.2341003-2-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
we might want to know why jbd2 thread using high io for detail,
split ext4_journal_start trace to ext4_journal_start_sb and
ext4_journal_start_inode, show ino and handle type when possible.
Signed-off-by: changfengnan <changfengnan@bytedance.com>
Link: https://lore.kernel.org/r/20221008120518.74870-1-changfengnan@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before the commit 461c3af045 ("ext4: Change handle_mount_opt() to use
fs_parameter") ext4 mount option journal_path did follow links in the
provided path.
Bring this behavior back by allowing to pass pathwalk flags to
fs_lookup_param().
Fixes: 461c3af045 ("ext4: Change handle_mount_opt() to use fs_parameter")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20221004135803.32283-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Return value directly from ext4_group_extend_no_check()
instead of getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Link: https://lore.kernel.org/r/20220831160843.305836-1-cui.jinpeng2@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In do_writepages, if the value returned by ext4_writepages is "-ENOMEM"
and "wbc->sync_mode == WB_SYNC_ALL", retry until the condition is not met.
In __ext4_get_inode_loc, if the bh returned by sb_getblk is NULL,
the function returns -ENOMEM.
In __getblk_slow, if the return value of grow_buffers is less than 0,
the function returns NULL.
When the three processes are connected in series like the following stack,
an infinite loop may occur:
do_writepages <--- keep retrying
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_ext_convert_to_initialized
ext4_split_extent
ext4_split_extent_at
__ext4_ext_dirty
__ext4_mark_inode_dirty
ext4_reserve_inode_write
ext4_get_inode_loc
__ext4_get_inode_loc <--- return -ENOMEM
sb_getblk
__getblk_gfp
__getblk_slow <--- return NULL
grow_buffers
grow_dev_page <--- return -ENXIO
ret = (block < end_block) ? 1 : -ENXIO;
In this issue, bg_inode_table_hi is overwritten as an incorrect value.
As a result, `block < end_block` cannot be met in grow_dev_page.
Therefore, __ext4_get_inode_loc always returns '-ENOMEM' and do_writepages
keeps retrying. As a result, the writeback process is in the D state due
to an infinite loop.
Add a check on inode table block in the __ext4_get_inode_loc function by
referring to ext4_read_inode_bitmap to avoid this infinite loop.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220817132701.3015912-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for setting a cross-architecture baseline for EFI boot
support, remove the Kconfig option that permits the command line initrd
loader to be disabled. Also, bump the minor version so that any image
built with the new version can be identified as supporting this.
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is no iocg_pd_init function. The pd_alloc_fn function pointer of
iocost policy is set with ioc_pd_init. Just correct it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-6-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we trace vtime_base_rate instead of vtime_rate, there is nowhere
which accesses now->vrate except function ioc_now using now->vrate locally.
Just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-5-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ac33e91e2d ("blk-iocost: implement vtime loss
compensation") rename original vtime_rate to vtime_base_rate
and current vtime_rate is original vtime_rate with compensation.
The current rate showed in tracepoint is mixed with vtime_rate
and vtime_base_rate:
1) In function ioc_adjust_base_vrate, the first trace_iocost_ioc_vrate_adj
shows vtime_rate, the second trace_iocost_ioc_vrate_adj shows
vtime_base_rate.
2) In function iocg_activate shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_activate...
3) In function ioc_check_iocgs shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_idle...
Trace vtime_base_rate instead of vtime_rate as:
1) Before commit ac33e91e2d ("blk-iocost: implement vtime loss
compensation"), the traced rate is without compensation, so still
show rate without compensation.
2) The vtime_base_rate is more stable while vtime_rate heavily depends on
excess budeget on current period which may change abruptly in next period.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-4-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ac33e91e2daca("blk-iocost: implement vtime loss compensation")
split vtime_rate into vtime_rate and vtime_base_rate, we need reset both
vtime_base_rate and vtime_rate when device parameters are refreshed.
If vtime_base_rate is no reset here, vtime_rate will be overwritten with
old vtime_base_rate soon in ioc_refresh_vrate.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-3-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 10c70d95c0 ("block: remove the bd_openers checks in
blk_drop_partitions") we allow rereading of partition table although
there are users of the block device. This has an undesirable consequence
that e.g. if sda and sdb are assembled to a RAID1 device md0 with
partitions, BLKRRPART ioctl on sda will rescan partition table and
create sda1 device. This partition device under a raid device confuses
some programs (such as libstorage-ng used for initial partitioning for
distribution installation) leading to failures.
Fix the problem refusing to rescan partitions if there is another user
that has the block device exclusively open.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3
Fixes: 10c70d95c0 ("block: remove the bd_openers checks in blk_drop_partitions")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz
[axboe: fold in followup fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ieee80211_drop_unencrypted is called from ieee80211_rx_h_mesh_fwding and
ieee80211_frame_allowed.
Since ieee80211_rx_h_mesh_fwding can forward packets for other mesh nodes
and is called earlier, it needs to check the decryptions status and if the
packet is using the control protocol on its own, instead of deferring to
the later call from ieee80211_frame_allowed.
Because of that, ieee80211_drop_unencrypted has a mesh specific check
that skips over the mesh header in order to check the payload protocol.
This code is invalid when called from ieee80211_frame_allowed, since that
happens after the 802.11->802.3 conversion.
Fix this by moving the mesh specific check directly into
ieee80211_rx_h_mesh_fwding.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221201135730.19723-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used to selectively disable feature flags for checksum offload,
scatter/gather or GSO by changing vif->netdev_features.
Removing features from vif->netdev_features does not affect the netdev
features themselves, but instead fixes up skbs in the tx path so that the
offloads are not needed in the driver.
Aside from making it easier to deal with vif type based hardware limitations,
this also makes it possible to optimize performance on hardware without native
GSO support by declaring GSO support in hw->netdev_features and removing it
from vif->netdev_features. This allows mac80211 to handle GSO segmentation
after the sta lookup, but before itxq enqueue, thus reducing the number of
unnecessary sta lookups, as well as some other per-packet processing.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221010094338.78070-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Updates to the TIM information element to match changes made in the
IEEE Std 802.11ah-2020.
Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Link: https://lore.kernel.org/r/20221106221602.25714-1-gilad.itzkovitch@morsemicro.com
[use skb_put_data/skb_put_u8]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's not valid to have the multiple BSSID element in the
association response (per 802.11 REVme D1.0), so don't
try to parse it there, but only in the fallback beacon
elements if needed.
The other case that was parsing association requests was
already changed in a previous commit.
Change-Id: I659d2ef1253e079cc71c46a017044e116e31c024
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to open-code container_of() when we have
bss_from_pub(). Use it.
Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The call to ieee80211_do_stop() right after will also do
synchronize_rcu() to ensure the SDATA_STATE_RUNNING bit
is cleared, so we don't need to synchronize_net() here.
Change-Id: Id9f9ffcf195002013e5d9fde288877d219780864
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_get_txq() can only be called with vif != NULL.
Remove not needed NULL test in function.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20221107161328.2883-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In regulatory_init_db(), when it's going to return a error, reg_pdev
should be unregistered. When load_builtin_regdb_keys() fails it doesn't
do it and makes cfg80211 can't be reload with report:
sysfs: cannot create duplicate filename '/devices/platform/regulatory.0'
...
<TASK>
dump_stack_lvl+0x79/0x9b
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x22d/0x290
kobject_add_internal+0x247/0x800
kobject_add+0x135/0x1b0
device_add+0x389/0x1be0
platform_device_add+0x28f/0x790
platform_device_register_full+0x376/0x4b0
regulatory_init+0x9a/0x4b2 [cfg80211]
cfg80211_init+0x84/0x113 [cfg80211]
...
Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the "channel->freq_offset" comparison is omitted in cmp_bss(),
BSS with different kHz units cannot be distinguished in the S1G Band.
So "freq_offset" should also be included in the comparison.
Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com>
Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_lookup_key, the variable named `local` is unused if
compiled without lockdep, getting this warning:
net/mac80211/cfg.c: In function ‘ieee80211_lookup_key’:
net/mac80211/cfg.c:542:26: error: unused variable ‘local’ [-Werror=unused-variable]
struct ieee80211_local *local = sdata->local;
^~~~~
Fix it with __maybe_unused.
Fixes: 8cbf0c2ab6 ("wifi: mac80211: refactor some key code")
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20221111153622.29016-1-ihuguet@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 23715a26c8, which introduced some code in
assembler that manipulates both the ordinary and the shadow call stack
pointer in a way that could potentially be taken advantage of. So let's
revert it, and do a better job the next time around.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
For ACKs generated inside the I/O thread, transmit the ACK at the point of
generation. Where the ACK is generated outside of the I/O thread, it's
offloaded to the I/O thread to transmit it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fold __rxrpc_unuse_local() into rxrpc_unuse_local() as the latter is now
the only user of the former.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
