dpaa2_mac_is_type_fixed() is a header with no implementation and no
callers, which is referenced from the documentation though. It can be
deleted.
On the other hand, it would be useful to reuse the code between
dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
code should be called dpaa2_mac_is_type_phy(), so let's create that.
The removal and the addition are merged into the same patch because,
in fact, is_type_phy() is the logical opposite of is_type_fixed().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dpaa2_eth_setup_dpni() is called from the probe path and
dpaa2_eth_set_link_ksettings() is propagated to user space.
include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3
protocol". Conventional wisdom has it to not use it in networking
drivers. Replace it with -EOPNOTSUPP.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the introduction of clockevents, i.e., commit d316c57ff6
("clockevents: add core functionality"), there has been a mismatch between
the function and the kernel-doc comment for clockevent_delta2ns().
Hence, ./scripts/kernel-doc -none kernel/time/clockevents.c warns about it.
Adjust the kernel-doc comment for clockevent_delta2ns() for make W=1
happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221102091048.15068-1-lukas.bulwahn@gmail.com
Move the SoC register value queries and tests to specific functions,
to remove repetition of logic
No functional changes intended
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
So that MT7621_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ping_lookup() does not acquire the table spinlock, so iteration should
use hlist_nulls_for_each_entry_rcu().
Spotted during code review.
Fixes: dbca1596bb ("ping: convert to RCU lookups, get rid of rwlock")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221129140644.28525-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I found a use_count leakage towards supply regulator of rdev with
boot-on option.
┌───────────────────┐ ┌───────────────────┐
│ regulator_dev A │ │ regulator_dev B │
│ (boot-on) │ │ (boot-on) │
│ use_count=0 │◀──supply──│ use_count=1 │
│ │ │ │
└───────────────────┘ └───────────────────┘
In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).
Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.
However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The OMTP pin define headsets can be mis-detected as line out
instead of OMTP, causing obvious issues with audio quality.
This patch is to put increased resistances within
the device at a suitable point.
To solve this issue better, the new mechanism setup
ground switches with conditional delay control
and these allow for more stabile detection process
to operate as intended. This conditional delay control
will not impact the hardware process
but use extra system resource.
This commit improves control of ground switches in the AAD logic.
Signed-off-by: David Rau <david.rau.zg@renesas.com>
Link: https://lore.kernel.org/r/20221121050744.2278-1-david.rau.zg@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit f3186dd876 ("spi: Optionally use GPIO descriptors for CS GPIOs")
has changed the user-space interface so that bogus SPI_CS_HIGH started
to appear in the mask returned by SPI_IOC_RD_MODE even for active-low CS
pins. Commit 138c9c32f0
("spi: spidev: Fix CS polarity if GPIO descriptors are used") fixed only
SPI_IOC_WR_MODE part of the problem. Let's fix SPI_IOC_RD_MODE
symmetrically.
Test case:
#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/spi/spidev.h>
int main(int argc, char **argv)
{
char modew = SPI_CPHA;
char moder;
int f = open("/dev/spidev0.0", O_RDWR);
if (f < 0)
return 1;
ioctl(f, SPI_IOC_WR_MODE, &modew);
ioctl(f, SPI_IOC_RD_MODE, &moder);
return moder == modew ? 0 : 2;
}
Fixes: f3186dd876 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20221130162927.539512-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If vcap_dup_rule() fails that leads to an error pointer dereference
side the call to vcap_free_rule(). Also it only returns an error if the
very last call to vcap_read_rule() fails and it returns success for
other errors.
I've changed it to just stop printing after the first error and return
an error code.
Fixes: 3a7921560d ("net: microchip: sparx5: Add VCAP rule debugFS support for the VCAP API")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/Y4XUUx9kzurBN+BV@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 232ccac1bd.
On the subject of suspend, the RISC-V SBI spec states:
This does not cover whether any given events actually reach the hart or
not, just what the hart will do if it receives an event. On PolarFire
SoC, and potentially other SiFive based implementations, events from the
RISC-V timer do reach a hart during suspend. This is not the case for the
implementation on the Allwinner D1 - there timer events are not received
during suspend.
To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.
If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:
io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K
Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.
Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.
Fixes: 232ccac1bd ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
First, introduce struct rtw89_sub_entity for chanctx related stuffs.
Second, add enum rtw89_sub_entity_idx to rtw89_vif for vif operation
to access its/right chanctx stuffs after future multi-channel support.
Besides, RTW89_SUB_ENTITY_0 is the default chanctx entry throughout
driver, i.e. it's used for things which may not have a target chanctx
yet. So, we need to ensure that RTW89_SUB_ENTITY_0 is always working.
If there is at least one alive chanctx, then one of them must take
RTW89_SUB_ENTITY_0. If no alive chanctx, RTW89_SUB_ENTITY_0 will be
filled by rtw89_config_default_chandef().
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-7-pkshih@realtek.com
These MCC H2C(s) require to wait for MCC C2H to determine if the
execution is successful. Through rtw89_wait_for_cond(), we make
them wait for either a completion with data from MCC C2H handlers,
which calls rtw89_complete_cond(), or timeout.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-6-pkshih@realtek.com
Process C2H(s) related to MCC (multi-channel concurrency). These handling,
which either call rtw89_complete_cond() or show message in debug mode, can
be considered atomic/lock-free. So, they should be safe to be processed
directly after C2H pre-check in previous patch.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-5-pkshih@realtek.com
MCC (multi-channel concurrency) related H2Cs (host to chip commands)
require to wait for C2H (chip to host events) responses to judge the
execution result and data. We introduce helpers to assist this process.
Besides, we would like the helpers to be generic for use in driver even
outside of MCC H2C/C2H, so we make a independent patch for them.
In the following, I describe the things first.
```
(A) C2H is generated by FW, and then transferred upto driver. Hence,
driver cannot get it immediately without a bit waitting/blocking.
For this, we choose to use wait_for_completion_*() instead of
busy polling.
(B) From the driver management perspective, a scenario, e.g. MCC,
may have mulitple kind of H2C functions requiring this process
to wait for corresponding C2Hs. But, the driver management flow
uses mutex to protect each behavior. So, one scenario triggers
one H2C function at one time. To avoid rampant instances of
struct completion for each H2C function, we choose to use one
struct completion with one condition flag for one scenario.
(C) C2Hs, which H2Cs will be waitting for, cannot be ordered with
driver management flow, i.e. cannot enqueue work to the same
ordered workqueue and cannot lock by the same mutex, to prevent
H2C side from getting no C2H responses. So, those C2Hs are parsed
in interrupt context directly as done in previous commit.
(D) Following (C), the above underline H2Cs and C2Hs will be handled
in different contexts without sync. So, we use atomic_cmpxchg()
to compare and change the condition in atomic.
```
So, we introduce struct rtw89_wait_info which combines struct completion
and atomic_t. Then, the below are the descriptions for helper functions.
* rtw89_wait_for_cond() to wait for a completion based on a condition.
* rtw89_complete_cond() to complete a given condition and carry data.
Each rtw89_wait_info instance independently determines the meaning of
its waitting conditions. But, RTW89_WAIT_COND_IDLE (UINT_MAX) is reserved.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-4-pkshih@realtek.com
Before queuing C2H work, we check atomicity of the C2H's handler first now.
If atomic or lock-free, handle it directly; otherwise, handle it with mutex
in work as previous. This prepares for MAC MCC C2Hs which require to be
processed directly. And, their handlers will be functions which can be
considered atomic.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-3-pkshih@realtek.com
The `rtw89_mcc_info mcc` is only for RFK MCC stuffs instead of common
MCC management info. Replace it with `rtw89_rfk_mcc_info rfk_mcc` to
avoid confusion and reserve `struct rtw89_mcc_info mcc` for MCC management
code.
(No logic changes.)
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129083130.45708-2-pkshih@realtek.com
8821ce is a combo card, and BT is a USB device that could get card lost
during stress test, and need WiFi firmware to detect and recover it, so
driver sends a H2C to enable this mechanism.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221128075653.5221-1-pkshih@realtek.com
PoP stands for Packet on Packet that can improve performance in noisy
environment, but it could get RX stuck suddenly. In normal mode, firmware
can help to resolve the stuck, but firmware doesn't work in monitor mode.
Therefore, turn off PoP to avoid RX stuck.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221125072416.94752-4-pkshih@realtek.com
With basic HE radiotap, we can check data rate in sniffer data. To store
the radiotap data, we reserve headroom of aligned 64 bytes, and then
update HE radiotap in monitor mode, so it doesn't affect performance in
normal mode.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221125072416.94752-3-pkshih@realtek.com
For running with mac80211 channel context ops and using only as monitor,
we need to enable WANT_MONITOR_VIF to let mac80211 process virtual monitor
interface. Then, we are able to set channel on the monitor from user space.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221125072416.94752-2-pkshih@realtek.com
This patch fixes slab-out-of-bounds reads in brcmfmac that occur in
brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count
value of channel specifications provided by the device is greater than
the length of 'list->element[]', decided by the size of the 'list'
allocated with kzalloc(). The patch adds checks that make the functions
free the buffer and return -EINVAL if that is the case. Note that the
negative return is handled by the caller, brcmf_setup_wiphybands() or
brcmf_cfg80211_attach().
Found by a modified version of syzkaller.
Crash Report from brcmf_construct_chaninfo():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430
Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896
CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0.cold+0x93/0x334
kasan_report.cold+0x83/0xdf
brcmf_setup_wiphybands+0x1238/0x1430
brcmf_cfg80211_attach+0x2118/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30
Allocated by task 1896:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
kmem_cache_alloc_trace+0x19e/0x330
brcmf_setup_wiphybands+0x290/0x1430
brcmf_cfg80211_attach+0x2118/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888115f24000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
2048-byte region [ffff888115f24000, ffff888115f24800)
Memory state around the buggy address:
ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Crash Report from brcmf_enable_bw40_2g():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0
Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896
CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0.cold+0x93/0x334
kasan_report.cold+0x83/0xdf
brcmf_cfg80211_attach+0x3d11/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30
Allocated by task 1896:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
kmem_cache_alloc_trace+0x19e/0x330
brcmf_cfg80211_attach+0x3302/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_set_configuration+0x984/0x1770
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
bus_for_each_drv+0x123/0x1a0
__device_attach+0x207/0x330
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
usb_new_device.cold+0x463/0xf66
hub_event+0x10d5/0x3330
process_one_work+0x873/0x13e0
worker_thread+0x8b/0xd10
kthread+0x379/0x450
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888103787000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
2048-byte region [ffff888103787000, ffff888103787800)
Memory state around the buggy address:
ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/202211301601416229001@zte.com.cn
Commit ca7b72b5a5 ("clocksource: Add driver for the Ingenic JZ47xx OST")
adds the struct platform_driver ingenic_ost_driver, with the definition of
pm functions under the non-existing config PM_SUSPEND, which means the
intended pm functions were never actually included in any build.
As the only callbacks are .suspend_noirq and .resume_noirq, we can assume
that it is intended to be CONFIG_PM_SLEEP.
Since commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones"), the default pattern for platform_driver definitions
conditional for CONFIG_PM_SLEEP is to use pm_sleep_ptr().
As __maybe_unused annotations on the dev_pm_ops structure and its callbacks
are not needed anymore, remove these as well.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221123083159.22821-1-lukas.bulwahn@gmail.com
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b27110 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
The mips build generates two warnings:
WARNING: modpost: EXPORT symbol "clear_page_cpu" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: modpost: EXPORT symbol "copy_page_cpu" [vmlinux] version generation failed, symbol will not be versioned.
Add their prototypes to be defined in asm-prototypes.h, so that
genksyms knows the types of these symbols and can generate CRCs for
them.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is not used by the DSA dt-binding, so remove it from all devicetrees.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Change the labels of the DSA ports to generic naming for switch ports.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The phy-mode property must be defined on the MAC instead of the PHY. Define
phy-mode under gmac1 which the external phy is connected to.
Tested-by: Petr Louda <petr.louda@outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
find_timens_vvar_page() is not architecture-specific, as can be seen from
how all five per-architecture versions of it are the same.
(arm64, powerpc and riscv are exactly the same; x86 and s390 have two
characters difference inside a comment, less blank lines, and mark the
!CONFIG_TIME_NS version as inline.)
Refactor the five copies into a central copy in kernel/time/namespace.c.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130115320.2918447-1-jannh@google.com
After switching the voltage, no reset data and command will cause
CMD2 timeout.
Fixes: 29ca763fc2 ("mmc: sdhci-sprd: Add pin control support for voltage switch")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.
Fixes: 08302c35b5 ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
DPI hasn't really been used up until now, so the default has
been meaningless.
In theory we should be able to pass the desired format for the
adjacent bridge chip through, but framework seems to be missing
for that.
As the main device to use DPI is the VGA666 or Adafruit Kippah,
both of which use RGB666, change the default to being RGB666 instead
of RGB888.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-6-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The VC4 DPI output can support multiple BGR666 variants, but they were
never added to the driver. Let's add the the support for those formats.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-5-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The RGB565 format with padding over 24 bits
(MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI
controller. This is what the Geekworm MZP280 DPI display uses, so let's
add support for it in the DPI controller driver.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-4-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-2-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm
MZP280 panel for the Raspberry Pi.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-1-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The len variable is used while uninitialized. Initialize it.
Fixes: 1e4a91db10 ("drm/probe-helper: Provide a TV get_modes helper")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221201090736.290935-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The mode name in struct drm_cmdline_mode can hold 32 characters at most,
which can easily get overrun. Switch to strscpy() to prevent such a
thing.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527354 ("Security best practices violations")
Fixes: a7ab155397 ("drm/modes: Switch to named mode descriptors")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The underline length for the new Analog TV properties section doesn't
match the title length, resulting in a warning.
Fixes: 7d63cd8526 ("drm/connector: Add TV standard property")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This does not fix a real bug, since virtual addresses
are currently indentical to physical ones.
Use virt_to_phys() for intparm interrupt parameter to
convert a 64-bit virtual address to the 32-bit physical
address, which is expected to be below 2GB.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The "ignore_updelay" variable needs to be initialized to false.
Fixes: f8a65ab2f3 ("bonding: fix link recovery in mode 2 when updelay is nonzero")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
af_unix: Fix a NULL deref in sk_diag_dump_uid().
The first patch fixes a NULL deref when we dump a AF_UNIX socket's UID,
and the second patch adds a repro/test for such a case.
====================
Link: https://lore.kernel.org/r/20221127012412.37969-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().
Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
...
# 1: Test terminated unexpectedly by signal 9
# FAIL diag_uid.uid.1
not ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# 1: Test terminated by timeout
# FAIL diag_uid.uid_unshare.1
not ok 2 diag_uid.uid_unshare.1
# FAILED: 0 / 2 tests passed.
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
With the patch, the test succeeds.
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
# OK diag_uid.uid.1
ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# OK diag_uid.uid_unshare.1
ok 2 diag_uid.uid_unshare.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use flexible array to simplify memory allocation.
It saves some memory, avoids an indirection when reading the 'clusters'
array and removes some LoC.
Detailed explanation:
====================
Knowing that:
- each devm_ allocation over-allocates 40 bytes for internal needs
- Some rounding is done by the memory allocator on 8, 16, 32, 64, 96,
128, 192, 256, 512, 1024, 2048, 4096, 8192 boundaries
and that:
- sizeof(struct tegra186_cpufreq_data) = 24
- sizeof(struct tegra186_cpufreq_cluster) = 16
Memory allocations in tegra186_cpufreq_probe() are:
data: (24 + 40) = 64 => 64 bytes
data->clusters: (2 * 16 + 40) = 72 => 96 bytes
So a total of 160 bytes are allocated.
56 for the real need, 80 for internal uses and 24 are wasted.
If 'struct tegra186_cpufreq_data' is reordered so that 'clusters' is a
flexible array:
- it saves one pointer in the structure
- only one allocation is needed
So, only 96 bytes are allocated:
16 + 2 * 16 + 40 = 88 => 96 bytes
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is no need to use netif_napi_add_weight() when the weight argument
is 64. See "net: drop the weight argument from netif_napi_add".
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Link: https://lore.kernel.org/r/202211301744378304494@zte.com.cn
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
