For vram_usagebyfirmware_v2_2, fw_vram_reserve is not used. So
fw_vram_usage_va is NULL, and cannot do virt data exchange
anymore. Should add drv_vram_usage_va to do virt data exchange
in vram_usagebyfirmware_v2_2 case. And refine some code style
checks in pre add vram reservation logic patch
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The currently supported minimum gcc version is 5.1. Before that, the
PIC register, when generating Position Independent Code, was considered
"fixed" in the sense that it wasn't in the set of registers available to
the compiler's register allocator. Which, on x86-32, is already a very
small set.
What is more, the register allocator was unable to satisfy extended asm
"=b" constraints. (Yes, PIC code uses %ebx on 32-bit as the base reg.)
With gcc 5.1:
"Reuse of the PIC hard register, instead of using a fixed register,
was implemented on x86/x86-64 targets. This improves generated PIC
code performance as more hard registers can be used. Shared libraries
can significantly benefit from this optimization. Currently it is
switched on only for x86/x86-64 targets. As RA infrastructure is already
implemented for PIC register reuse, other targets might follow this in
the future."
(from: https://gcc.gnu.org/gcc-5/changes.html)
which basically means that the register allocator has a higher degree
of freedom when handling %ebx, including reloading it with the correct
value before a PIC access.
Furthermore:
arch/x86/Makefile:
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
$ gcc -Wp,-MMD,arch/x86/boot/.cpuflags.o.d ... -fno-pic ... -D__KBUILD_MODNAME=kmod_cpuflags -c -o arch/x86/boot/cpuflags.o arch/x86/boot/cpuflags.c
so the 32-bit workaround in cpuid_count() is fixing exactly nothing
because 32-bit configs don't even allow PIC builds.
As to 64-bit builds: they're done using -mcmodel=kernel which produces
RIP-relative addressing for PIC builds and thus does not apply here
either.
So get rid of the thing and make cpuid_count() nice and simple.
There should be no functional changes resulting from this.
[ bp: Expand commit message. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221104124546.196077-1-ubizjak@gmail.com
For reasons that are unclear to this reader fpsimd_bind_state_to_cpu()
populates the struct fpsimd_last_state_struct that it uses to store the
active floating point state for KVM guests by passing an argument for
each member of the structure. As the richness of the architecture increases
this is resulting in a function with a rather large number of arguments
which isn't ideal.
Simplify the interface by using the struct directly as the single argument
for the function, renaming it as we lift the definition into the header.
This could be built on further to reduce the work we do adding storage for
new FP state in various places but for now it just simplifies this one
interface.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-9-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The syscall ABI says that the SVE register state not shared with FPSIMD
may not be preserved on syscall, and this is the only mechanism we have
in the ABI to stop tracking the extra SVE state for a process. Currently
we do this unconditionally by means of disabling SVE for the process on
syscall, causing userspace to take a trap to EL1 if it uses SVE again.
These extra traps result in a noticeable overhead for using SVE instead
of FPSIMD in some workloads, especially for simple syscalls where we can
return directly to userspace and would not otherwise need to update the
floating point registers. Tests with fp-pidbench show an approximately
70% overhead on a range of implementations when SVE is in use - while
this is an extreme and entirely artificial benchmark it is clear that
there is some useful room for improvement here.
Now that we have the ability to track the decision about what to save
seprately to TIF_SVE we can improve things by leaving TIF_SVE enabled on
syscall but only saving the FPSIMD registers if we are in a syscall.
This means that if we need to restore the register state from memory
(eg, after a context switch or kernel mode NEON) we will drop TIF_SVE
and reenable traps for userspace but if we can just return to userspace
then traps will remain disabled.
Since our current implementation and hence ABI has the effect of zeroing
all the SVE register state not shared with FPSIMD on syscall we replace
the disabling of TIF_SVE with a flush of the non-shared register state,
this means that there is still some overhead for syscalls when SVE is in
use but it is very much reduced.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-8-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we track the type of the stored register state separately to
what is active in the task, it is valid to have the FPSIMD register
state stored while in streaming mode. Remove the special case handling
for SME when setting FPSIMD register state.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we are recording the type of floating point register state we
are saving when we write the register state out to memory we can use
that information when we load from memory to decide which format to
load, bringing TIF_SVE into line with what we saved rather than relying
on TIF_SVE to determine what to load.
The SME state details are already recorded directly in the saved
SVCR and handled based on the information there.
Since we are not changing any of the save paths there should be no
functional change from this patch, further patches will make use of this
to optimise and clarify the code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we are explicitly telling the host FP code which register state
it needs to save we can remove the manipulation of TIF_SVE from the KVM
code, simplifying it and allowing us to optimise our handling of normal
tasks. Remove the manipulation of TIF_SVE from KVM and instead rely on
to_save to ensure we save the correct data for it.
There should be no functional or performance impact from this change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to avoid needlessly saving and restoring the guest registers KVM
relies on the host FPSMID code to save the guest registers when we context
switch away from the guest. This is done by binding the KVM guest state to
the CPU on top of the task state that was originally there, then carefully
managing the TIF_SVE flag for the task to cause the host to save the full
SVE state when needed regardless of the needs of the host task. This works
well enough but isn't terribly direct about what is going on and makes it
much more complicated to try to optimise what we're doing with the SVE
register state.
Let's instead have KVM pass in the register state it wants saving when it
binds to the CPU. We introduce a new FP_STATE_CURRENT for use
during normal task binding to indicate that we should base our
decisions on the current task. This should not be used when
actually saving. Ideally we might want to use a separate enum for
the type to save but this enum and the enum values would then
need to be named which has problems with clarity and ambiguity.
In order to ease any future debugging that might be required this patch
does not actually update any of the decision making about what to save,
it merely starts tracking the new information and warns if the requested
state is not what we would otherwise have decided to save.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When we save the state for the floating point registers this can be done
in the form visible through either the FPSIMD V registers or the SVE Z and
P registers. At present we track which format is currently used based on
TIF_SVE and the SME streaming mode state but particularly in the SVE case
this limits our options for optimising things, especially around syscalls.
Introduce a new enum which we place together with saved floating point
state in both thread_struct and the KVM guest state which explicitly
states which format is active and keep it up to date when we change it.
At present we do not use this state except to verify that it has the
expected value when loading the state, future patches will introduce
functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Since 8383741ab2 (KVM: arm64: Get rid of host SVE tracking/saving)
KVM has not tracked the host SVE state, relying on the fact that we
currently disable SVE whenever we perform a syscall. This may not be true
in future since performance optimisation may result in us keeping SVE
enabled in order to avoid needing to take access traps to reenable it.
Handle this by clearing TIF_SVE and converting the stored task state to
FPSIMD format when preparing to run the guest. This is done with a new
call fpsimd_kvm_prepare() to keep the direct state manipulation
functions internal to fpsimd.c.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
It contains:
- build fix for SAMA5D3 devices which don't have an L2 cache and due to this
accesssing outer_cache.write_sec in sama5_secure_cache_init() could throw
undefined reference to `outer_cache' if CONFIG_OUTER_CACHE is disabled
from common sama5_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY39P2QAKCRCejrg/N2X7
/ZqrAQCqmwZchH2nuCZMWVGtWuSDqUT0+3QGflfKUdopej7mFQD9Er7AsGUYyGNb
ATKG7UCtJc+YUwiiNi56NcUnsYQ7KAg=
=CqR7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=R63p
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.1-3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.1 #3
It contains:
- build fix for SAMA5D3 devices which don't have an L2 cache and due to this
accesssing outer_cache.write_sec in sama5_secure_cache_init() could throw
undefined reference to `outer_cache' if CONFIG_OUTER_CACHE is disabled
from common sama5_defconfig.
* tag 'at91-fixes-6.1-3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: fix build for SAMA5D3 w/o L2 cache
Link: https://lore.kernel.org/r/20221125093521.382105-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add __maybe_unused tag for system PM ops suspend and resume.
This is required to fix allmodconfig compilation issue.
Fixes: a3a96e93cc ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669726428-3140-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an internal trace when valid beacons are received.
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Let's introduce the basics for advertizing discovered PANs and
coordinators, which is:
- A new "scan" netlink message group.
- A couple of netlink command/attribute.
- The main netlink helper to send a netlink message with all the
necessary information to forward the main information to the user.
Two netlink attributes are proactively added to support future UWB
complex channels, but are not actually used yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The PMU support to filter the TLP when counting the bandwidth with below
options:
- only count the TLP headers
- only count the TLP payloads
- count both TLP headers and payloads
In the current driver it's default to count the TLP payloads only, which
will have an implicity side effects that on the traffic only have header
only TLPs, we'll get no data.
Make this user configuration through "len_mode" parameter and make it
default to count both TLP headers and payloads when user not specified.
Also update the documentation for it.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-5-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The "Filter options" list have a rather ugly indentation. Also, the first
paragraph after list name is rendered without separator (as continuation
from the name).
Align the list by indenting the list items and add a blank line
separator for each list name.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The PMU instance will be called hisi_pcie<sicl>_core<core> rather than
hisi_pcie<sicl>_<core>. Fix this in the documentation.
Fixes: c8602008e2 ("docs: perf: Add description for HiSilicon PCIe PMU driver")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Some event id of hisi-pcie-pmu is incorrect, fix them.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Add support for reporting link modes,
including `Supported link modes` and `Advertised link modes`,
via ethtool $DEV.
A new command `SPCODE_READ_MEDIA` is added to read info from
management firmware. Also, the mapping table `nfp_eth_media_table`
associates the link modes between NFP and kernel. Both of them
help to support this ability.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221125113030.141642-1-simon.horman@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__armv8pmu_probe_pmu() returns if detected PMU is either not implemented or
implementation defined. Extracted ID_AA64DFR0_EL1_PMUVer value, when PMU is
not implemented is '0' which can be replaced with ID_AA64DFR0_EL1_PMUVer_NI
defined as '0b0000'.
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-perf-users@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221128025449.39085-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The minimal alsa-lib configuration code is similar in both mixer
and pcm tests. Move this code to the shared conf.c source file.
Also, fix the build rules inspired by rseq tests. Build libatest.so
which is linked to the both test utilities dynamically.
Also, set the TEST_FILES variable for lib.mk.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129085306.2345763-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tascam's Model 12 is a mixer which can also operate as a USB audio
interface. The audio interface uses explicit feedback but it seems that
it does not correctly handle missing isochronous frames.
When injecting an xrun (or doing anything else that pauses the playback
stream) the feedback rate climbs (for example, at 44,100Hz nominal, I
see a stable rate around 44,099 but xrun injection sees this peak at
around 44,135 in most cases) and glitches are heard in the audio stream
for several seconds - this is significantly worse than the single glitch
expected for an underrun.
While the stream does normally recover and the feedback rate returns to
a stable value, I have seen some occurrences where this does not happen
and the rate continues to increase while no audio is heard from the
output. I have not found a solid reproduction for this.
This misbehaviour can be avoided by totally resetting the stream state
by switching the interface to alt 0 and back before restarting the
playback stream.
Add a new quirk flag which forces the endpoint and interface to be
reconfigured whenever the stream is stopped, and use this for the Tascam
Model 12.
Separate interfaces are used for the playback and capture endpoints, so
resetting the playback interface here will not affect the capture stream
if it is running. While there are two endpoints on the interface,
these are the OUT data endpoint and the IN explicit feedback endpoint
corresponding to it and these are always stopped and started together.
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221129130100.1257904-1-john@metanate.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct cas_control embeds multiple generic SPI structures and we
have to make sure these structures are initialized to default values.
This driver does not set all attributes. When using kmalloc before some
attributes were not initialized and contained random data which caused
random crashes at bootup.
Fixes: ded845a781 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20221121002201.1339636-1-hauke@hauke-m.de
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)
-----BEGIN PGP SIGNATURE-----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=dUtt
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme into for-6.2/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.2
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"
* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
nvmet: expose firmware revision to configfs
nvmet: expose IEEE OUI to configfs
nvme: rename the queue quiescing helpers
nvmet: fix a memory leak in nvmet_auth_set_key
nvme: return err on nvme_init_non_mdts_limits fail
nvme: avoid fallback to sequential scan due to transient issues
nvme-rdma: stop auth work after tearing down queues in error recovery
nvme-tcp: stop auth work after tearing down queues in error recovery
nvme-auth: have dhchap_auth_work wait for queues auth to complete
nvme-auth: remove redundant auth_work flush
nvme-auth: convert dhchap_auth_list to an array
nvme-auth: check chap ctrl_key once constructed
nvme-auth: no need to reset chap contexts on re-authentication
nvme-auth: remove redundant deallocations
nvme-auth: clear sensitive info right after authentication completes
nvme-auth: guarantee dhchap buffers under memory pressure
nvme-auth: don't keep long lived 4k dhchap buffer
nvme-auth: remove redundant if statement
nvme-auth: don't override ctrl keys before validation
nvme-auth: don't ignore key generation failures when initializing ctrl keys
...
Provide to_gpio_device() helper which can be utilized in the existing
and future code.
While at it, make sure it becomes no-op at compilation time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In cc2520_hw_init(), if oscillator start failed, the error code
should be returned.
Fixes: 0da6bc8cc3 ("ieee802154: cc2520: adds driver for TI CC2520 radio")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20221120075046.2213633-1-william.xuanziyang@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Make sclp's con_drop sysfs attribute also writable, and allow to
change its value during runtime. This way handling of sclp console
drop handling is consistent with the 3215 device driver.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use sysfs_emit() for all sclp sysfs show functions, which is the
current standard way to generate output strings.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use kstrobool() to parse sclp_con_drop parameter. This way handling of
valid values for the sclp_con_drop parameter is identical to the
con3215_drop parameter. In particular this allows to pass values like
"yes" and "true", which was not possible before.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Commit 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.
Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.
To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).
Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.
Fixes: 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
As the return value is not 0 only in case there is no such notifier
block registered, add a WARN_ON_ONCE() to yell about it.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221125100255.1786741-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes: 41ce1456e1 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following Thunderbolt/USB4 changes for the v6.2 merge
window:
- Add wake on connect/disconnect for USB4 ports
- A couple of minor cleanups
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=UvLm
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.2 merge window
This includes following Thunderbolt/USB4 changes for the v6.2 merge
window:
- Add wake on connect/disconnect for USB4 ports
- A couple of minor cleanups
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add wake on connect/disconnect on USB4 ports
thunderbolt: ACPI: Use the helper fwnode_find_reference()
thunderbolt: Remove redundant assignment to variable len
thunderbolt: Use str_enabled_disabled() helper
The clk_disable_unprepare() should be called in the error handling
of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional
and clk_prepare_enable by devm_clk_get_optional_enabled.
Fixes: f5eccd94b6 ("mmc: mediatek: Add subsys clock control for MT8192 msdc")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
CoreSight updatesfor v6.2 includes :
- Support for ETMv4 probing on hotplugged CPUs
- Fix TRBE driver for cpuhp state refcounting
- Fix CTI driver NULL pointer dereferencing
- Fix comment for repeated word
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEuFy0byloRoXZHaWBxcXRZPKyBqEFAmOE/p4ACgkQxcXRZPKy
BqEG/BAAlQES7dHt666nK089mR/70zqgf5FP/asnOpeSbjiA7yORRfiYwWuXL8hr
uN/3lrynjUMKrnL6ycRNE6Bg0hdyh+kz2+5qz9MXQ/9c7kM+PdCcZ7WKOdw1xP9B
1ekU1xcVqD3LIoYUYB/+OcWt9uHHctjJaKYYV7WsmPROcw3HZRdKC8NDA3rf8A/l
j6v75AqfNddvjd8kFe/4bIv/TXE0tj5SqAXekffKFhX0MYaI0CA7QEhM1E0DqgTH
sZ0mt+rulKBqy2SB6CHq5RRLYBlQA6s6oV0fnmLjFDI0TVNzIB7kBKULgW3kZohl
9KbQl3WH8Wqy0Lp0GXqPuoZeVvm2eL5PjpCju85N4RwhIIkneqiRVRVR4aqKyV1F
E0JfY+/s8hTfh8qC5mePCrExJZR9YZKPUV0fN3ePmJyFYmqRIbZNxjpEPM3zvaxk
xiACzKts6+SNdEj4XSSrdmfE6qQo8dcVJ6ehBt0XQtWcsC8HNm3t78W6fga74/lA
YQHDvT7YXiS/XsnHzvdErWTiI3ZgdGXQfVfbUWaY6QURYA/Nb32LWa8fzz1OHoZu
s4bfBIiGV9qAqd1hviiidMess0KdsTN5NyaLUC+7ym09F9pT3g/mdSzINVx6eIWa
6MxdCSBcOVCX0VrUd0zjbYriVbBBMFVFkN7rJ1VzQx//V5NwVfQ=
=YWNK
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Update for v6.2
CoreSight updatesfor v6.2 includes :
- Support for ETMv4 probing on hotplugged CPUs
- Fix TRBE driver for cpuhp state refcounting
- Fix CTI driver NULL pointer dereferencing
- Fix comment for repeated word
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
coresight: etm4x: add CPU hotplug support for probing
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN+QSEACgkQZR1NuKta
54Ducgf+PsD85BWXlqWkTa2S8tn7h+OCETapAEY+JMRu1UB15ccLGZlH1O/L2try
NBjUEcbzvS1KPYmNMubKXOIlacTJrukaoqvtMfLSe1+Y/zvfTpF1+LGLp39wSRo8
R36A1VEQxalSZoFhQMERVoWBfjiVaW3ENqe3H9Vb/ab9QdMUzP4P4uaLsECtsLSy
ft31ZcN+jPjhjSYC7xZjzd3KXvVqlQ/5TsXdX6nsxphrOUiKxT55Gsypkx5O4vt1
Q4aw+v3Z0NgknDF90n7O90y/wgE3OqKHiKl+9l7lS/WkLhhaWknJ9zJlfLI8uiEH
UjMku/EpH6SSN5hrCDQvtFaXJSgiWQ==
=cHXD
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v6.2:
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
* tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (63 commits)
habanalabs: fix VA range calculation
habanalabs: fail driver load if EEPROM errors detected
habanalabs: make print of engines idle mask more readable
habanalabs: clear non-released encapsulated signals
habanalabs: don't put context in hl_encaps_handle_do_release_sob()
habanalabs: print context refcount value if hard reset fails
habanalabs: add RMWREG32_SHIFTED to set a val within a mask
habanalabs: fix rc when new CPUCP opcodes are not supported
habanalabs/gaudi2: added memset for the cq_size register
habanalabs: added return value check for hl_fw_dynamic_send_clear_cmd()
habanalabs: increase the size of busy engines mask
habanalabs/gaudi2: change memory scrub mechanism
habanalabs: extend process wait timeout in device fine
habanalabs: check schedule_hard_reset correctly
habanalabs: reset device if still in use when released
habanalabs/gaudi2: return to reset upon SM SEI BRESP error
habanalabs/gaudi2: don't enable entries in the MSIX_GW table
habanalabs/gaudi2: remove redundant firmware version check
habanalabs/gaudi: fix print for firmware-alive event
habanalabs: fix print for out-of-sync and pkt-failure events
...
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is existing define for codec DAI name, make use of it when setting
codec DAI name.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
