64bit byteorder conversion is broken when several registers need to be
converted because the source register array advances in steps for 4 bytes
instead of 8:
for (i = ...
src64 = nft_reg_load64(&src[i]);
~~~~~ u32 *src
nft_reg_store64(&dst64[i],
Remove the multi-register support, it has other issues as well:
Pablo points out that commit
caf3ef7468 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval")
alters semantics: before the loop operated on registers, i.e.
for ( ... )
dst32[i] = htons((u16)src32[i])
.. but after the patch it will operate on bytes, which makes this
useless to convert e.g. concatenations, which store each compound
in its own register.
Multi-convert of u32 has one theoretical application:
ct mark . meta mark . tcp dport @intervalset
Because ct mark and meta mark are host byte order, use with
intervals has to convert the byteorder for ct/meta mark value
to network byte order (bigendian).
nftables emits this:
[ meta load mark => reg 1 ]
[ byteorder reg 1 = hton(reg 1, 4, 4) ]
[ ct load mark => reg 9 ]
[ byteorder reg 9 = hton(reg 9, 4, 4) ]
...
I.e. two separate calls. Theoretically it could be changed to do:
[ meta load mark => reg 1 ]
[ ct load mark => reg 9 ]
[ byteorder reg 1 = htonl(reg 1, 4, 8) ]
...
But then all it would take to change the set to
meta mark . tcp dport . ct mark
... and we'd be back to two "byteorder" calls. IOW, support to
convert a range of registers is both dysfunctional and dubious.
Simplify this: remove the feature.
Pablo Neira Ayuso points out that nftables before 1.1.0 can generate
incorrect byteorder conversions, see 9fe58952c45a,
"evaluate: skip byteorder conversion for selector smaller than 2 bytes"
in nftables.git). Affected rulesets fail to load with this change and
old userspace due to 'len != size' check.
Fixes: c301f0981f ("netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()")
Cc: <stable+noautosel@kernel.org> # may break rule load with old nftables versions
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netfilter-devel/20240206104336.ctigqpkunom2ufmn@lion.mk-sys.cz/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc588.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits().
Fixes: 63137bc588 ("netfilter: ebtables: Fixes dropping of small packets in bridge nat")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c
Fixes: 45d9bcda21 ("netfilter: nf_tables: validate len in nft_validate_data_load()")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_tunnel_obj_destroy() calls metadata_dst_free() which directly
kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets
that took a reference via dst_hold() in nft_tunnel_obj_eval() and
are still queued (e.g. in a netem qdisc) are left with a dangling
pointer. When these packets are eventually dequeued, dst_release()
operates on freed memory.
Replace metadata_dst_free() with dst_release() so the metadata_dst
is freed only after all references are dropped. The dst subsystem
already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When parsing fails after we've matched the command string we
should bail out instead of trying to match a different command.
This helper should be deprecated, given prevalence of TLS I doubt it has
any relevance in 2026.
Fixes: 869f37d8e4 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Closes: https://sashiko.dev/#/patchset/20260525182924.28456-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY.
Fixes: ad49d86e07 ("netfilter: nf_tables: Add synproxy support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This was reported by Sashiko [1].
The RCU walk over rt->fib6_siblings can spin forever if rt is unlinked
mid-iteration: rt->fib6_siblings.next still points into the old ring,
so the loop never meets &rt->fib6_siblings as its terminator.
fib6_purge_rt() always does WRITE_ONCE(rt->fib6_nsiblings, 0) before
list_del_rcu(), so readers can use rt->fib6_nsiblings == 0 as the
detach signal. The same pattern is used in fib6_info_uses_dev() and
rt6_nlmsg_size().
[1]: https://sashiko.dev/#/patchset/20260520023411.391233-1-jiayuan.chen%40linux.dev
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code.
Link: https://sashiko.dev/#/patchset/20260519015506.634185-1-rosenp%40gmail.com
Fixes: 05f00505a8 ("ipvs: fix crash if scheduler is changed")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With PREEMPT_RCU this triggers a splat because smp_processor_id() can be
preempted while inside a RCU critical section. If xt_NFQUEUE target is
invoked via nft_compat_eval() path, we are inside a RCU critical
section.
Just use the raw version instead.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c0 ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tb_test_tunnel_3dp() allocates three DisplayPort tunnels
but only releases the first two before returning. Release the
third tunnel as well to keep the test cleanup balanced.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Enable Bluetooth support for the Ampak AP6275P module on the
Khadas Edge 2L. This involves enabling the UART5 interface for
HCI communication and defining the required regulators and
power-sequence pins.
Signed-off-by: Gray Huang <gray.huang@wesion.com>
Link: https://patch.msgid.link/20260507033541.2576335-3-gray.huang@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Khadas Edge 2L board provides one USB 3.0 Host port and
one USB 2.0 port (connected via an internal hub). Enable the
corresponding DWC3 controllers and PHYs.
Signed-off-by: Gray Huang <gray.huang@wesion.com>
Link: https://patch.msgid.link/20260507033541.2576335-2-gray.huang@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
While the design of the NanoPi R4S is based on the common NanoPi 4
family, it is trimmed down a lot.
Disable all the peripherals on the SoC that are not used, and delete
all the external components that are not present.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
[feels like the cleaner option, than to move those peripherals into a new
rk3399-nanopi-allothers.dtsi, as the r4s variants are not as many ]
Link: https://patch.msgid.link/20260505172903.33271-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The EEPROM used on the R4S (enterprise) is the 24AA025E48T-I/OT from
MicroChip. This is a 2-Kbit EEPROM with 16-byte page size. The latter
half of the EEPROM is read-only, and the last 48 bits contain a globally
unique MAC address. That is to say this is not an ordinary EEPROM.
The compatible for this type of EEPROM was introduced later that the
board. Switch over to the correct compatible now that it is available.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260505165244.1902-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
snd_card_new() and snd_devm_card_new() allocate struct snd_card
together with optional driver-private storage. The storage is currently
described only by open-coded sizeof(*card) + extra_size arithmetic, and
snd_card_init() reaches it by manually adding sizeof(struct snd_card) to
the card pointer.
Make the trailing storage explicit with a flexible array member. Use
kzalloc_flex() for the regular allocation path and struct_size() for the
devres allocation size. This documents the layout and avoids open-coded
variable-size object arithmetic.
Align the flexible array to unsigned long long so the driver-private area
does not become less aligned than the old sizeof(struct snd_card) tail
address on 32-bit ABIs.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260531-alsa-card-private-flex-array-v2-1-e4ff67f5bd23@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_device_new() allocates struct snd_seq_device together with a
caller-specific argument area. SNDRV_SEQ_DEVICE_ARGPTR() reaches that
area by adding sizeof(struct snd_seq_device) to the object pointer.
Make the trailing storage explicit with a flexible array and allocate it
with kzalloc_flex(). This makes the object layout self-describing and
avoids open-coded size arithmetic in the allocation and accessor.
Reject negative argsize values before calculating the allocation size.
Current in-tree callers pass either zero or sizeof() values, but the
function takes an int size argument and should not let a negative value
flow into unsigned allocation arithmetic.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260531-alsa-seq-flex-args-v2-1-6e068d4ed9b0@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DAX support in ext2 was deprecated in commit d5a2693f93 ("ext2:
Deprecate DAX") with a removal deadline of end of 2025. Remove all DAX
code from ext2 as scheduled.
This removes the DAX mount option, IOMAP DAX support, DAX file
operations, DAX address_space_operations, and the DAX fault handler.
[JK: Fixup some whitespace damage]
Signed-off-by: Ashwin Gundarapu <linuxuser509@zohomail.in>
Link: https://patch.msgid.link/19e5aa07c9b.3a2e576d130187.5289857983023045470@zohomail.in
Signed-off-by: Jan Kara <jack@suse.cz>
The Vishay VEML3328 is an RGBCIR light sensor that shares similar
devicetree properties as other existing VEMLxxxx sensors in the
kernel.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
get_partial_node_bulk() moves each selected slab from the node's
partial list to the local pc->slabs list using a remove_partial() and
list_add() pair. In practice, the loop often detaches several adjacent
slabs. Doing this individually repeatedly manipulates list pointers
while holding n->list_lock, which causes unnecessary churn.
To demonstrate this, the counts below show how often single vs. multiple
consecutive slabs are retrieved during a will-it-scale mmap stress test:
consecutive_slabs_count frequency
= 1 277345324
= 2 335238023
= 3 175717884
>= 4 88862337
The data confirms that retrieving multiple contiguous slabs is highly
frequent.
To optimize this, track contiguous runs of matching slabs and move each
run in a single operation using list_bulk_move_tail(). This reduces list
pointer churn inside the lock critical section.
Apply the same optimization to __refill_objects_node() when reattaching
leftover partial slabs back to the node's partial list.
The will-it-scale mmap benchmark shows a 2% ~ 5% performance improvement
after applying this patch.
Signed-off-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20260529035120.81304-3-hao.li@linux.dev
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Wrap partial slab count inc/dec and flag set/clear into
helper functions to reduce code duplication.
Note that __add_partial() is called locklessly in
early_kmem_cache_node_alloc(), but since there is no such use case for
removal, __remove_partial() does not exist.
Suggested-by: Harry Yoo <harry@kernel.org>
Signed-off-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20260529035120.81304-2-hao.li@linux.dev
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Oversized prefilled sheaves are allocated separately because their
capacity can be larger than the cache's regular sheaf capacity. After
they are flushed, however, they are empty sheaves as well, and should be
released through the same empty-sheaf helper.
Allocate oversized prefilled sheaves with __alloc_empty_sheaf() and free
them with free_empty_sheaf() after a failed prefill or after they are
returned and flushed. This keeps the oversized and pfmemalloc return paths
consistent, including the SLAB_KMALLOC-specific __GFP_NO_OBJ_EXT and
mark_obj_codetag_empty() handling.
Keep the caller-GFP filtering in alloc_empty_sheaf() instead of
__alloc_empty_sheaf(). In particular, do not clear OBJCGS_CLEAR_MASK in
the raw helper, so the oversized prefill path does not unexpectedly drop
caller-provided flags such as __GFP_NOFAIL. The SLAB_KMALLOC-specific
addition of __GFP_NO_OBJ_EXT remains in __alloc_empty_sheaf(), matching
the free_empty_sheaf() assumption.
Since oversized sheaves are now allocated and freed through the empty
sheaf helpers, SHEAF_ALLOC and SHEAF_FREE also account for oversized
sheaves. Update the stat comments accordingly.
Keep the capacity initialization in the oversized prefill path, since
capacity is currently only used for prefilled sheaves
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Link: https://patch.msgid.link/20260528193537623nAo-xYBNYBysGKSBjREuO@zte.com.cn
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Hao Li <hao.li@linux.dev>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
The mss2_pci_init() function contains a check for the ARM machine ID
via the machine_is_mss2() macro. The board concerned now supports only
FDT booting, which does not use machine IDs, and therefore the code
should be updated to check the DT compatible property instead. The
machine was converted to FDT booting in commit fbf04d814d ("ARM:
orion5x: convert Maxtor Shared Storage II to the Device Tree"). The
presence of this machine ID check prevents the removal of machine IDs
no longer used by the kernel from arch/arm/tools/mach-types, because
the machine_is_*() macros are generated from mach-types. To resolve
this issue, use of_machine_is_compatible() instead.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Store the per-source APLIC IRQ state in the APLIC allocation instead
of allocating it separately.
This ties the IRQ state lifetime directly to the APLIC state, removes a
separate allocation failure path, and lets __counted_by() describe the
array bounds.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260511032144.361520-1-rosenp@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags().
Fixes: b96ba312e2 ("xfrm: iptfs: share page fragments of inner packets")
Cc: stable@vger.kernel.org # 6.14+
Signed-off-by: Takao Sato <takaosato1997@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The legacy board file for MACH_LINKSTATION_LSCHL was removed in
commit ecfe696391 ("ARM: orion5x: remove legacy support of ls-chl")
after it was converted to DT booting, but a reference to it remained in
mvebu_v5_defconfig. Drop this unused code.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable the i2c8 interface and add the connected SpacemiT P1 PMIC and
its associated regulators to support voltage regulation on the board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Yixun lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260520100000.575719-1-amadeus@jmu.edu.cn
Signed-off-by: Yixun Lan <dlan@kernel.org>
In armada_370_coherency_init, cpu_config_np is no longer needed after
of_iomap. We can call of_node_put earlier and summarize the two calls.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Don't check the returned pointer from of_find_compatible_node.
We pass this pointer to of_iomap, which handles np==NULL correctly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The ser field in struct luo_session was intended to point to the
serialized data for a session, but it was never actually utilized in the
implementation. All serialization and deserialization logic consistently
uses the pointers maintained in struct luo_session_header.
Remove the dead field to clean up the structure.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260527202737.1345192-6-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
In luo_file_unpreserve_files() and luo_file_finish(), reorder
module_put() and xa_erase() to ensure the file handler module remains
pinned while its operations are being accessed.
Specifically, luo_get_id() dereferences fh->ops->get_id, so the module
reference must be held until after xa_erase() (which calls luo_get_id)
completes.
For luo_file_finish(), this requires moving the module_put() call out of
the luo_file_finish_one() helper and into the main loop of
luo_file_finish() itself.
Fixes: 00d0b37237 ("liveupdate: prevent double management of files")
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260527202737.1345192-5-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
During the reboot() syscall, user processes may still be running
concurrently and attempting to mutate sessions (e.g., creating,
retrieving, or releasing sessions). To prevent this, introduce
luo_session_serialize_rwsem to synchronize mutations with the
serialization process.
All session mutation operations (create, retrieve, release, ioctl) take
the read lock. The serialization process (luo_session_serialize) takes
the write lock and holds it indefinitely on success. This effectively
freezes the LUO session subsystem during the transition to the new
kernel. If serialization fails, the lock is released to allow recovery.
Fixes: 0153094d03 ("liveupdate: luo_session: add sessions support")
Reported-by: Oskar Gerlicz Kowalczuk <oskar@gerlicz.space>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260527202737.1345192-4-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Extend the scope of the rwsem_read lock in luo_session_retrieve() to
overlap with the acquisition of the session mutex. This prevents a
concurrent thread from releasing and freeing the session between the
lookup and the mutex lock.
Fixes: 0153094d03 ("liveupdate: luo_session: add sessions support")
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260527202737.1345192-3-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
A preserve_context kexec returns to the current kernel, which is
unrelated to live update where the state is passed to the next kernel.
Skip liveupdate_reboot() in this case to avoid serialization and prevent
sessions from being left in a frozen state upon return.
Fixes: db8bed8082 ("kexec: call liveupdate_reboot() before kexec")
Reported-by: Oskar Gerlicz Kowalczuk <oskar@gerlicz.space>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260527202737.1345192-2-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
We currently do not guarantee compatibility due to ongoing
development, so mention this explicitly in the user-facing
documentation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://patch.msgid.link/20260527153725.1770394-1-luca.boccassi@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
systemd v261 will add native support for LUO via the file descriptor
store mechanism. Add a brief paragraph in the LUO userspace documentation
page to inform users.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://patch.msgid.link/20260519152957.548119-1-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
When using scratch_scale, the scratch sizes are rounded up to
CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This
is not done when using fixed scratch sizes via command line. This can
result in user specifying a size which is not aligned, and thus kernel
releasing a pageblock that is only partially scratch.
Do the rounding up for both cases in scratch_size_update().
Fixes: 3dc92c3114 ("kexec: add Kexec HandOver (KHO) generation helpers")
Cc: stable@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260519160554.2713361-1-pratyush@kernel.org
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
While the liveupdate= parameter is documented in kernel-parameters.txt,
it is not listed in LUO's user facing documentation. This can make it
hard for users to figure out how to enable the subsystem, since enabling
just the config isn't enough.
Note the need for the kernel parameter in LUO core documentation, which
gets exported to Documentation/core-api/liveupdate.rst.
Suggested-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Link: https://patch.msgid.link/20260519125714.2435640-1-pratyush@kernel.org
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type.
Fixes: 16cec0d265 ("liveupdate: luo_session: add ioctls for file preservation")
Cc: stable@vger.kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260519122428.2378446-1-pratyush@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Lorenzo says:
static const struct vm_uffd_ops *vma_uffd_ops(struct vm_area_struct *vma)
{
if (vma_is_anonymous(vma))
return &anon_uffd_ops;
return vma->vm_ops ? vma->vm_ops->uffd_ops : NULL;
}
This is doing a redundant check _and_ making life confusing, as if
!vma->vm_ops is a condition that can be reached there, it can't, as
vma_is_anonymous() is literally a !vma->vm_ops check :)
Remove the redundant check.
Link: https://lore.kernel.org/20260527184751.4147364-4-rppt@kernel.org
Fixes: 0f48947c42 ("userfaultfd: introduce vm_uffd_ops")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: David Carlier <devnexen@gmail.com>
Cc: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__mfill_atomic_pte() unconditionally dereferences ops because there is an
assumption that VMAs that can undergo mfill_* operations are vetted on
registration and must have valid vm_uffd_ops.
Add a guard against potential bugs and make sure __mfill_atomic_pte()
bails out if ops is NULL.
Link: https://lore.kernel.org/20260527184751.4147364-3-rppt@kernel.org
Fixes: ad9ac30813 ("userfaultfd: introduce vm_uffd_ops->alloc_folio()")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: David CARLIER <devnexen@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michael Bommarito <michael.bommarito@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd: verify VMA state across UFFDIO_COPY retry", v2.
... and two more small fixes.
This patch (of 3):
mfill_copy_folio_retry() drops the VMA lock for copy_from_user() and
reacquires it afterwards. The destination VMA can be replaced during that
window.
The existing check compares vma_uffd_ops() before and after the retry, but
if a shmem VMA with MAP_SHARED is replaced with a shmem VMA with
MAP_PRIVATE (or vice versa) the replacement goes undetected.
The change from MAP_PRIVATE to MAP_SHARED will treat the folio allocated
with shmem_alloc_folio() as anonymous and this will cause BUG() when
mfill_atomic_install_pte() will try to folio_add_new_anon_rmap().
The change from MAP_SHARED to MAP_PRIVATE allows injection of folios into
the page cache of the original VMA.
There is no need to change for hugetlb because it never uses
mfill_copy_folio_retry().
Introduce helpers for more comprehensive comparison of VMA state:
- mfill_retry_state_save() to save the relevant VMA state into a struct
mfill_retry_state (original uffd_ops, relevant VMA flags, vm_file and
pgoff) before dropping the lock
- mfill_retry_state_changed() to compare the saved state with the state
of the VMA acquired after retaking the locks
- mfill_retry_state_put() to release vm_file pinning.
Use DEFINE_FREE() cleanup to wrap mfill_retry_state_put() to avoid
complicating error handling paths in mfill_copy_folio_retry().
Link: https://lore.kernel.org/20260527184751.4147364-1-rppt@kernel.org
Link: https://lore.kernel.org/20260527184751.4147364-2-rppt@kernel.org
Fixes: 292411fda2 ("mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()")
Fixes: 6ab703034f ("userfaultfd: mfill_atomic(): remove retry logic")
Co-developed-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Peter Xu <peterx@redhat.com>
Co-developed-by: David Carlier <devnexen@gmail.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put().
Link: https://lore.kernel.org/20260526101337.1984081-1-yintirui@huawei.com
Fixes: fadae29530 ("thp: use mm_file_counter to determine update which rss counter")
Signed-off-by: Yin Tirui <yintirui@huawei.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__split_huge_pud_locked() updates the file/shmem RSS counter after
dropping the PUD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put().
Link: https://lore.kernel.org/20260526101355.1984244-1-yintirui@huawei.com
Fixes: dbe5415329 ("mm/huge_memory: add vmf_insert_folio_pud()")
Signed-off-by: Yin Tirui <yintirui@huawei.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vmemmap_restore_pte() rebuilds restored vmemmap pages from a tail-page
template derived from compound_head(). This is wrong when the current PTE
already maps a page whose contents are not tail-page metadata.
In the rollback path of vmemmap_remap_free(), the first restored PTE is
backed by vmemmap_head and contains head-page metadata. Reconstructing
that page from a tail-page template overwrites the head-page state and
corrupts the restored vmemmap page.
Fix this by copying the full page from the page currently mapped by the
PTE. Also pass vmemmap_tail to the rollback walk so only PTEs backed by
the shared tail page are restored, while the head PTE remains mapped to
vmemmap_head. Add VM_WARN_ON_ONCE() checks for unexpected cases.
Link: https://lore.kernel.org/20260525025213.2229628-1-songmuchun@bytedance.com
Fixes: c0b495b91a ("mm/hugetlb: refactor code around vmemmap_walk")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Acked-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_get_folio() speculatively calls folio_test_lru() before
folio_try_get(). The folio can get freed and reallocated to a tail page.
In the case, VM_BUG_ON_PGFLAGS() in const_folio_flags() can be triggered.
Remove the speculative call.
Also mark folio_test_lru() check right after folio_try_get() success as no
more unlikely.
The race should be rare. Also the problem can happen only if the kernel
has enabled CONFIG_DEBUG_VM_PGFLAGS. No real world report of this issue
has been made so far. This fix is based on only theoretical analysis.
That said, a bug is a bug. A similar issue was also fixed via commit
3203b3ab0f ("mm/filemap: don't call folio_test_locked() without a
reference in next_uptodate_folio()"). I don't expect this change will
make a meaningful impact to DAMON performance in the real world, though I
will be happy to be corrected from the real world reports.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260525162256.8317-1-sj@kernel.org
Link: https://lore.kernel.org/20260517234112.89245-1-sj@kernel.org [1]
Fixes: 3f49584b26 ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Fernand Sieber <sieberf@amazon.com>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL.
Fixes: 5f8d4a9008 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-4-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX.
Fixes: fa8dda1ede ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-3-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
