dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary.
Fixes: 4747ab89b4 ("fpga: dfl: add basic support for DFHv1")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-2-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into next
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
Add freescale 2.4 GHz IEEE® 802.15.4/ZigBee mc1323 to fix the below
CHECK_DTBS warnings.
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: /soc/bus@50000000/spba-bus@50000000/spi@50010000/mc1323@0: failed to match any schema with compatible: ['fsl,mc1323']
Since the i.MX53 platform is more than 20 years old, it is difficult to
find detailed information about how the MC1323 was used on the i.MX53 SMD
board, as the functionality depended on firmware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260522203810.832631-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add television encoder (TVE) for legacy i.MX53 (over 15 years) to fix below
DTB_CHECK warnings:
arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: /soc/bus@60000000/tve@63ff0000: failed to match any schema with compatible: ['fsl,imx53-tve']
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521193734.1496372-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
snap_count is u32 but the comparison is against a SIZE_MAX-derived value
(~2^61 on 64-bit), which clang flags as always false with
-Wtautological-constant-out-of-range-compare.
The proper check here should be that snap_count does not go over
RBD_MAX_SNAP_COUNT.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260530011255.52916-1-rosenp@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path.
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/b70aff9a920cc42110fe5cf454c3099561863519.1780063368.git.royenheart@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If security_bpf_prog_load() fails there is no need to call into
security_bpf_prog_free() as the LSM will handle the cleanup of any partial
LSM state before returning to the caller with an error. Thankfully this
isn't an issue with any of the existing code as the LSMs which currently
provide BPF hook callback implementations don't allocate any internal
state, but this is something we want to fix for potential future users.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20260523160025.16363-2-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Global subprogram argument checking derives generic pointer sizes from BTF
and passes the resolved size to check_mem_reg() as a u32. The access-size
validation path then uses a signed int, and stack pointers negate the value
before calling check_helper_mem_access().
This creates a wrap when BTF describes a pointee size larger than S32_MAX.
For example, a global subprogram argument of type:
int (*p)[0x3fffffff]
has a BTF-resolved pointee size of 0xfffffffc bytes. At a call site the
caller can pass a pointer to a 4-byte stack slot at fp-4. The current
PTR_TO_STACK path computes:
size = -(int)mem_size
so 0xfffffffc becomes -4 as a signed int and the negation validates only
a 4-byte stack range. That range is covered by the caller's stack slot,
so the call is accepted.
The callee is then verified independently with R1 as PTR_TO_MEM and
mem_size 0xfffffffc. A small instruction such as:
r0 = *(u32 *)(r1 + 4)
is accepted as being inside that BTF-described memory region. At run time,
however, the actual argument value is still fp-4, so r1 + 4 addresses fp+0,
outside the 4-byte object that the caller provided.
Reject sizes that cannot be represented by the verifier's signed
access-size API before the stack-specific negation. Add a verifier
regression test for the oversized BTF argument.
Fixes: 2cb27158ad ("bpf: poison dead stack slots")
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260528062155.3988156-1-hataegu0826@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Puranjay Mohan says:
====================
bpf, arm64: Stack argument fixes
Patch 1 fixes a redundant MOV in the arm64 JIT's
emit_stack_arg_store_imm() and clarifies the stack layout comments. This
is not a bug fix but an improvement.
Patch 2 bumps the stack argument tests from 6-8 args to at least 10 so
they actually exercise the native stack on arm64, where x0-x7 cover the
first 8 arguments.
====================
Link: https://patch.msgid.link/20260528161750.1900674-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On arm64, the first 8 arguments are passed in registers (x0-x7), so
tests with 8 or fewer arguments never exercise the native stack argument
path in the JIT. Increase argument counts to at least 10 across all
BPF-to-BPF subprog and kfunc stack argument tests so that at least 2
arguments land on the arm64 stack.
For the two-callees test, bump foo1 from 8 to 10 and foo2 from 10 to 12
args to preserve the different-stack-depth flavor of the test.
The bpf_kfunc_call_stack_arg_mem kfunc is left unchanged at 7 args to
avoid breaking the precision backtracking test which relies on hardcoded
verifier log instruction indices.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260528161750.1900674-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
emit_stack_arg_store_imm() materializes the immediate into tmp and
then moves tmp to the target register (x5-x7). Emit the immediate
directly into the target register to avoid the redundant MOV.
While here, qualify the bare "FP" in the stack-layout ASCII art as
"A64_FP" so it is not confused with BPF_FP, and note that incoming
stack arguments sit above the FP/LR pair pushed by the callee
prologue.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260528161750.1900674-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_gen__prog_load() byte-swaps the program insns and the {func,line}_info
and CO-RE relo blobs in place for cross-endian targets. The blob offsets
come from add_data(), which returns 0 on failure: realloc_data_buf() either
frees and NULLs gen->data_start (realloc OOM) or returns early on an
already-latched gen->error, leaving a stale, possibly too-small buffer.
Neither bswap site checked for this. With gen->swapped_endian set and a
failed generation, "gen->data_start + off" becomes NULL + 0. Guard the
same way via !gen->error so they are skipped once generation has failed.
Fixes: 8ca3323dce ("libbpf: Support creating light skeleton of either endianness")
Reported-by: sashiko <sashiko@sashiko.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260529162829.315921-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
realloc_insn_buf() as well as realloc_data_buf() free and NULL
gen->insn_start / gen->data_start on -ENOMEM but leave gen->insn_cur /
gen->data_cur pointing into the old, freed buffer. Just reset the
cursors to NULL alongside the base pointers so the freed state is
coherent.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260529094119.307264-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_gen__finish() calls compute_sha_update_offsets() gated only on
the gen_hash option, without first consulting gen->error. On a failed
generation this is buggy: a failed realloc_data_buf() sets gen->data_start
to NULL (leaving gen->data_cur dangling), so compute_sha_update_offsets()
runs libbpf_sha256() over a NULL buffer with a bogus length; a failed
realloc_insn_buf() likewise sets gen->insn_start to NULL and the hash
immediates get patched through that NULL base.
The computed program is discarded in either case, since the following
"if (!gen->error)" block does not publish opts->insns once an error is
set. Thus, skip the hash pass when generation has already failed.
Fixes: ea923080c1 ("libbpf: Embed and verify the metadata hash in the loader")
Reported-by: sashiko <sashiko@sashiko.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260529094119.307264-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the cleanup-label jump offset does not fit in s16, emit_check_err()
sets gen->error = -ERANGE and then emits a BPF_JMP_IMM(BPF_JA, 0, 0, -1)
self-loop.
The latter emit() is dead: gen->error is assigned on the preceding line,
and emit() then bails out early in realloc_insn_buf() the moment gen->error
is set, so the jump is never written into the instruction stream.
gen->error alone already marks the generation as failed. This is a follow-up
to 7dd62566e0 ("libbpf: fix off-by-one in emit_signature_match jump offset")
which removed the jump in emit_signature_match() but not in other locations.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260529094119.307264-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I am making a life change and will take a long break
from my current work, so I will step down from the "M:" responsibility.
I am currently a "R:" in "BPF [GENERAL]", this part stays unchanged.
I am folding most of the parts into "BPF [GENERAL]".
For "BPF [BTF]", it is long overdue as I am no longer involved.
It is folded into the "BPF [GENERAL]".
The "BPF [STORAGE & CGROUPS]" will also be covered by "BPF [GENERAL]".
For struct_ops, its usage is no longer limited to networking,
so this naturally should move back to "BPF [GENERAL]".
For the reuseport, it will continue to be maintained together
by "BPF [GENERAL]" and the "NETWORKING [SOCKETS]".
For other "BPF [NETWORKING]...", I am moving myself to "R:".
Thanks!
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260529203909.1222164-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If the persistent ring buffer is detected on boot up to have a corrupted
sub-buffer, that sub-buffer is cleared to zero and its commit value has
the RB_MISSED_EVENTS bit set. That bit is to allow the "trace",
"trace_pipe" and "trace_pipe_raw" files know that events were dropped by
outputting "[LOST EVENTS]".
Only in this case does that bit get set in the writeable portion of the
ring buffer. When events are dropped in the normal ring buffer, that
information is stored in the cpu_buffer descriptor and the
RB_MISSED_EVENTS is set in the buffer page at the time the page is
consumed. It is never set in the writeable portion of the buffer.
Add comments to describe this better as it can be confusing to know when
the RB_MISSED_EVENTS are set in the commit portion of the buffer page.
Link: https://lore.kernel.org/all/20260529001500.14178455a046a5cbc6180861@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260528223738.41276c0e@fedora
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on
conn->async_requests via setup_async_work(), with cancel_fn =
smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock.
When the request is cancelled, the worker frees the file_lock with
locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never
reaches release_async_work() -- the only site that unlinks the work from
conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays
matchable on async_requests with a live cancel_fn pointing at the freed file_lock,
until connection teardown finally runs release_async_work().
smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second
SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs
smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (cancelled branch)
... cache file_lock_cache of size 192
Reproduced on mainline with KASAN by an authenticated SMB client.
Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback
cannot be fired a second time.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Two concurrent same-user DHnC reconnects can both observe fp->conn == NULL
before either sets it. ksmbd_reopen_durable_fd() checks fp->conn to guard
against a handle already being reconnected, but the check and the binding
assignment are not atomic: both threads pass the guard, both call
ksmbd_conn_get() on the same fp, and both eventually reach
kfree(fp->owner.name) -- a double-free of the owner.name slab object.
The double-bound ksmbd_file also causes a write-UAF on the 344-byte
ksmbd_file_cache object when a concurrent smb2_close() spins on fp->f_lock
after the object has been freed by the losing reconnect path.
KASAN on 7.1-rc5 (48-thread concurrent reconnect, 3000 cycles):
BUG: KASAN: double-free in ksmbd_reopen_durable_fd+0x268/0x308
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xac/0x150
Write of size 4 at offset 24 into freed ksmbd_file_cache object
Five double-bind windows observed; 63 total KASAN reports triggered.
Fix: validate and claim fp->conn under write_lock(&global_ft.lock) so the
check-and-claim is atomic. ksmbd_lookup_durable_fd() already treats
fp->conn != NULL as "in use" and skips such an fp; setting fp->conn before
dropping the lock closes the race. ksmbd_conn_get() is a non-sleeping
refcount increment, safe under the rwlock. The rollback path on __open_id()
failure also clears fp->conn/tcon under the lock so concurrent readers see
a consistent state.
Fixes: b1f1e80620 ("ksmbd: centralize ksmbd_conn final release to plug transport leak")
Assisted-by: Henry (Claude):claude-opus-4
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn
into a local with neither READ_ONCE() nor a NULL check. Both run from
oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a
concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL
under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then
writes through NULL at offset 0xc4 -- a remotely triggerable oops.
Guard both reads the way compare_guid_key() already does: read
opinfo->conn with READ_ONCE() and return early if it is NULL, before
allocating the work struct so nothing leaks. A NULL conn means the
client is gone and the break is moot, so return 0; oplock_break() treats
that as success and runs the normal teardown.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Assisted-by: Henry (Claude):claude-opus-4
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
kho_scratch_migratetype(), defined in include/linux/memblock.h uses enum
migratetype. This breaks build for memblock tests with:
./linux/memblock.h:634:73: error: parameter 2 (‘mt’) has incomplete type
634 | enum migratetype mt)
Fix it by defining enum migratetype and MIGRATE_CMA. As is the case with
the other headers in tools/testing/memblock, do not bring in the whole
thing, only what is needed.
Reported-by: Mike Rapoport <rppt@kernel.org>
Closes: https://lore.kernel.org/linux-mm/afcdDm4aAJvNaQqH@kernel.org/
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260504102742.3833159-1-pratyush@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20260423174032.3140399-3-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Use refcount_t instead of a raw integer to keep track of references on
incoming and outgoing FLBs. Using refcount_t provides protection from
overflow, underflow, and other issues.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20260423174032.3140399-2-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Verify that the new LIVEUPDATE_SESSION_GET_NAME ioctl works
as expected via new test cases in the existing liveupdate selftest.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-5-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Userspace when requesting a session via the ioctl specifies a name and
gets a FD, but then there is no ioctl to go back the other way and get
the name given a LUO session FD. This is problematic especially when
there is a userspace orchestrator that wants to check what FDs it is
handling for clients without having to do manual string scraping of
procfs, or without procfs at all.
Add a ioctl to simply get the name from an FD.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-4-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Verify that LIVEUPDATE_IOCTL_CREATE_SESSION ioctl which provide a name
that is an empty string or too long are not allowed.
Cc: stable@vger.kernel.org
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-3-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
A session name must not be an empty string, and must not exceed the
maximum size define in the uapi header, including null termination.
Fixes: 0153094d03 ("liveupdate: luo_session: add sessions support")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-2-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, struct page
initialization is deferred to parallel kthreads that run later
in the boot process.
During KHO restoration, kho_preserved_memory_reserve() writes metadata
for each preserved memory region. However, if the struct page has not
been initialized, this write targets uninitialized memory, potentially
leading to errors like:
BUG: unable to handle page fault for address: ...
Fix this by introducing kho_get_preserved_page(), which ensures
all struct pages in a preserved region are initialized by calling
init_deferred_page() which is a no-op when the struct page is already
initialized.
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Co-developed-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260423122538.140993-3-mclapinski@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Currently, if CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled,
kho_release_scratch() will initialize the struct pages and set migratetype
of KHO scratch. Unless the whole scratch fits below first_deferred_pfn,
some of that will be overwritten either by deferred_init_pages() or
memmap_init_reserved_range().
To fix it, make memmap_init_range(), deferred_init_memmap_chunk() and
__init_page_from_nid() recognize KHO scratch regions and set
migratetype of pageblocks in those regions to MIGRATE_CMA.
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260423122538.140993-2-mclapinski@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
BPF arena (kernel/bpf/arena.c) is compiled only on MMU && 64BIT, while
SCHED_CLASS_EXT depends on BPF_SYSCALL && BPF_JIT && DEBUG_INFO_BTF with no
64BIT requirement. On a 32-bit arch with a BPF JIT, SCX builds while the
arena helpers are absent, so the cid-form code's unconditional calls to
bpf_prog_arena() and bpf_arena_map_kern_vm_start() fail to link:
build_policy.o: undefined reference to `bpf_prog_arena'
build_policy.o: undefined reference to `bpf_arena_map_kern_vm_start'
Guard the three call sites with the same MMU && 64BIT condition that gates
arena.o. A cid-form scheduler needs a BPF arena, which isn't available on
such builds, so it can't run there regardless. cpu-form schedulers don't
touch the arena and are unaffected.
This is a quick workaround to get past the build errors. A fuller fix may
make the whole cid-form path conditional on the same condition, or drop
32-bit support outright.
Fixes: 0e2819cba9 ("sched_ext: Require an arena for cid-form schedulers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605310454.U9iByL2n-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202605310926.APXMc0RJ-lkp@intel.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Yuyang Huang says:
====================
bpf: Align syscall writeback behavior with user-declared size
This series fixes an out-of-bounds write vulnerability in BPF_PROG_QUERY
while maintaining backward compatibility for older userspace applications.
BPF_PROG_QUERY unconditionally writes back the 'query.revision' field
to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the cgroup query layout before 'query.revision' was
added), the kernel performs an out-of-bounds write.
We address this by propagating the user-provided 'uattr_size' down to
the cgroup query handlers and conditionally skipping the write-back of
'query.revision' if the buffer is too small. This allows legacy cgroup
queries to succeed safely.
tcx and netkit queries are left unchanged since they were introduced in
the same merge window as 'query.revision' and have no legacy callers.
Finally, we add a selftest to verify these boundary behaviors.
Changes since v2:
- Propagate uattr_size to __cgroup_bpf_query() and conditionally write
revision (instead of unconditionally rejecting smaller sizes in front-gate).
- Update BPF selftests to verify that cgroup queries succeed with
OLD_QUERY_SIZE without writing revision, and succeed with FULL_QUERY_SIZE.
- Remove early size checks in the front-gate to keep the patch minimal.
Changes since v1:
- Simplify the kernel fix to checking the size only in bpf_prog_query().
- Revert all other subsystem query plumbing changes.
- Update BPF selftest to target BPF_CGROUP_INET_INGRESS cgroup query, and
add verification for attr size boundaries.
====================
Link: https://patch.msgid.link/20260531075600.4058207-1-yuyanghuang@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new selftest to verify that the BPF syscall (specifically
BPF_PROG_QUERY) correctly handles different user-declared attribute sizes.
Specifically, verify that:
- For cgroup queries, a query with a size that covers 'prog_cnt' but is
smaller than 'revision' (OLD_QUERY_SIZE) succeeds, but does not write
to 'revision' (verifying backward compatibility).
- A query with full size (FULL_QUERY_SIZE) succeeds and writes both
'prog_cnt' and 'revision'.
Fixes: 1209339844 ("bpf: Implement mprog API on top of existing cgroup progs")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://lore.kernel.org/r/20260531075600.4058207-3-yuyanghuang@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f23 added the mprog query API +
revision; tcx in e420bed025, netkit in 35dfaad718). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (1209339844). That
path has a real population of pre-revision callers.
Fixes: 1209339844 ("bpf: Implement mprog API on top of existing cgroup progs")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://lore.kernel.org/r/20260531075600.4058207-2-yuyanghuang@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Make the clearcpuid= boot parameter less prominent
and warn about its dangers & caveats (Borislav Petkov)
- Do not access the (new) PLATFORM_ID MSR when running as a guest
(Borislav Petkov)
- x86 ftrace: Relocate %rip-relative percpu refs in dynamic
trampolines, to fix crash when using such trampolines
(Alexis Lothoré)
- Fix x86-64 CFI build error (Peter Zijlstra)
- Revert FPU signal return magic number check optimization, because
it broke CRIU and gVisor in certain FPU configurations
(Andrei Vagin)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4sLh
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the clearcpuid= boot parameter less prominent
and warn about its dangers & caveats (Borislav Petkov)
- Do not access the (new) PLATFORM_ID MSR when running
as a guest (Borislav Petkov)
- x86 ftrace: Relocate %rip-relative percpu refs in dynamic
trampolines, to fix crash when using such trampolines
(Alexis Lothoré)
- Fix x86-64 CFI build error (Peter Zijlstra)
- Revert FPU signal return magic number check optimization,
because it broke CRIU and gVisor in certain FPU configurations
(Andrei Vagin)
* tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
x86/kvm/vmx: Fix x86_64 CFI build
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
x86/microcode: Do not access MSR_IA32_PLATFORM_ID when running as a guest
Documentation/arch/x86: Hide clearcpuid=
The UAC mixer of Edifier MF200 works fine except that its volume GET_CUR
method is somehow stubbed and returns a constant value. Since commit
86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky mixers"), the
sticky check considers the mixer to be sticky and unnecessarily disables
the mixer.
Add a quirk table entry matching VID/PID=0x2d99/0xa024 and applying
the MIXER_SKIP_GET_CUR_VOL quirk flag, so that the mixer is usable
again.
Quirky device sample:
usb 1-3.2: new full-speed USB device number 7 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=2d99, idProduct=a024, bcdDevice= 0.00
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: EDIFIER MF200
usb 1-3.2: Manufacturer: EDIFIER
usb 1-3.2: SerialNumber: EDI00000X06
input: EDIFIER EDIFIER MF200 Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0e:00.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:2D99:A024.0003/input/input8
input: EDIFIER EDIFIER MF200 Mouse as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0e:00.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:2D99:A024.0003/input/input9
input: EDIFIER EDIFIER MF200 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0e:00.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:2D99:A024.0003/input/input10
input: EDIFIER EDIFIER MF200 as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0e:00.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:2D99:A024.0003/input/input11
input: EDIFIER EDIFIER MF200 as /devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0e:00.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:2D99:A024.0003/input/input12
hid-generic 0003:2D99:A024.0003: input,hiddev1,hidraw2: USB HID v1.10 Mouse [EDIFIER EDIFIER MF200] on usb-0000:0e:00.0-3.2/input0
usb 1-3.2: 9:1: sticky mixer values (-32768/-32513/1 => -32702), disabling
Reported-by: Steve Smith <tarkasteve@gmail.com>
Closes: https://lore.kernel.org/r/CAHLWS5FJCx66GQ-O10pu+nEudEo_QgQAM9vt76T7vT0zGPPC1g@mail.gmail.com
Tested-by: Steve Smith <tarkasteve@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260531-uac-quirk-get-cur-vol-v4-3-ede643dca151@rong.moe
The Sennheiser MOMENTUM 3 is a wireless around-ear headphones featuring
ANC, which can be connected via Bluetooth or USB-C.
When connecting via USB-C, its UAC mixer works fine and precisely
corresponds to the reported dB range. However, the mixer's volume
GET_CUR method is somehow stubbed and returns a constant value (15dB).
Since commit 86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky
mixers"), the sticky check considers the mixer to be sticky and
unnecessarily disables the mixer.
Add a quirk table entry matching VID/PID=0x1377/0x6004 and applying
the MIXER_GET_CUR_BROKEN quirk flag, so that the mixer is usable again.
Quirky device sample:
usb 7-1.4.4.1.1.1: new full-speed USB device number 30 using xhci_hcd
usb 7-1.4.4.1.1.1: New USB device found, idVendor=1377, idProduct=6004, bcdDevice=38.85
usb 7-1.4.4.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.4.4.1.1.1: Product: MOMENTUM 3
usb 7-1.4.4.1.1.1: Manufacturer: Sennheiser electronic GmbH & Co. KG
usb 7-1.4.4.1.1.1: SerialNumber: <REDACTED>
usb 7-1.4.4.1.1.1: Found last interface = 0
usb 7-1.4.4.1.1.1: 1:1: add audio endpoint 0x3
usb 7-1.4.4.1.1.1: Creating new data endpoint #3
usb 7-1.4.4.1.1.1: 1:1 Set sample rate 48000, clock 0
usb 7-1.4.4.1.1.1: 6:0: sticky mixer values (0/11520/768 => 3840), disabling
usb 7-1.4.4.1.1.1: [6] FU [PCM Playback Volume] skipped due to invalid volume
input: Sennheiser electronic GmbH & Co. KG MOMENTUM 3 as /devices/pci0000:00/0000:00:08.3/0000:67:00.4/usb7/7-1/7-1.4/7-1.4.4/7-1.4.4.1/7-1.4.4.1.1/7-1.4.4.1.1.1/7-1.4.4.1.1.1:1.2/0003:1377:6004.002B/input/input208
input: Sennheiser electronic GmbH & Co. KG MOMENTUM 3 Consumer Control as /devices/pci0000:00/0000:00:08.3/0000:67:00.4/usb7/7-1/7-1.4/7-1.4.4/7-1.4.4.1/7-1.4.4.1.1/7-1.4.4.1.1.1/7-1.4.4.1.1.1:1.2/0003:1377:6004.002B/input/input209
hid-generic 0003:1377:6004.002B: input,hiddev99,hidraw12: USB HID v1.11 Device [Sennheiser electronic GmbH & Co. KG MOMENTUM 3] on usb-0000:67:00.4-1.4.4.1.1.1/input2
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260531-uac-quirk-get-cur-vol-v4-2-ede643dca151@rong.moe
Since commit 86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky
mixers"), the UAC mixer core utilizes volume SET_CUR and GET_CUR to
identify devices with sticky mixers. Unfortunately, even though most
devices with sticky GET_CUR also have corresponding sticky SET_CUR,
which I actually met more since the commit had been merged, there is
also a rare case that some devices may have volume mixers that responds
to SET_CUR properly but with its GET_CUR stubbed. This cause the sticky
check to consider the mixer to be sticky and unnecessarily disable it.
As the sticky check can't distinguish between sticky mixers and working
SET_CUR but broken GET_CUR, add QUIRK_FLAG_MIXER_GET_CUR_BROKEN to tell
that the device should fall into the second category when GET_CUR
returns a constant value. In this case, the sticky check becomes
non-fatal and only disables GET_CUR instead of the whole mixer. The
current volume will then be provided by the internal cache that stores
the last set volume.
An info message prompting users to check MIXER_GET_CUR_BROKEN for
potential sticky mixers is also added, so that users can learn how to do
some experiments to determine what's going on. If the mixer surprisingly
turns out to be non-sticky, they can submit a patch for a new quirk
table entry.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260531-uac-quirk-get-cur-vol-v4-1-ede643dca151@rong.moe
Two core changes, the only one of significance being the change to kick queues
in SDEV_CANCEL which had a small window for stuck requests. The major driver
fixes are the one to the FC transport class to widen the FPIN counter to
counter a theoretical (and privileged) fabric traffic injection attack and the
other is an iscsi fix where a malicious target could trick the kernel into an
output buffer overrun. Both the driver fixes were AI assisted.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCahxQ/RsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIX+HgD+Mqf+AKbV/EhPhKAfONeBaE0Q5e78KTyK
3e47Qxjs+mQBAKhWUwodLDS/WSm7Fbdj7tn/kuPSaH+R+JQltnPR4QPG
=BRJ7
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
davinci: fix fallback bus frequency on missing clock-frequency
virtio: mark device ready initially
-----BEGIN PGP SIGNATURE-----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=AcAd
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- davinci: fix fallback bus frequency on missing clock-frequency
- virtio: mark device ready initially
* tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: virtio: mark device ready before registering the adapter
i2c: davinci: fix division by zero on missing clock-frequency
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II and
"Nova 2 Lite" from GameSir controllers as well as a fix to prevent a
potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad in
Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when
tearing it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCahvBFwAKCRBAj56VGEWX
nP7XAQDH9WIYBX7XEHSPInN6GH8GngWA/94v3b6UpBSL2UFdQQEAo1+WoyOGL/Dh
0U0g5CcvDwx9irF8qJBWX2a3DRNPngo=
=hDBA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
KVM RISC-V triggers a TLB flush for every single stage-2 PTE
modification (unmap or write-protect) now. Although KVM coalesces the
hardware IPIs, the software overhead of executing the flush work
for every page is large, especially during dirty page tracking.
Following the approach used in x86 and arm64, this patch optimizes
the MMU logic by making the PTE manipulation functions return a boolean
indicating if a leaf PTE was actually changed. The outer MMU functions
bubble up this flag to batch the remote TLB flushes.
Consequently, the flush operation is executed only once per batch.
Moving it outside of the `mmu_lock` also reduces lock contention.
Tested with tools/testing/selftests/kvm on a 4-vCPU guest (Host
environment: QEMU 10.2.1 RISC-V)
1. demand_paging_test (1GB memory)
time ./demand_paging_test -b 1G -v 4
- Total execution time reduced from ~2m39s to ~2m31s
2. dirty_log_perf_test (1GB memory)
./dirty_log_perf_test -b 1G -v 4
- "Clear dirty log time" per iteration dropped significantly from
~3.40s to ~0.18s
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Link: https://lore.kernel.org/r/20260412023822.83341-1-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
pmc_register_ops() gets an owned reference to the
"atmel,sama5d2-securam" node with of_find_compatible_node(). The
success path dropped that reference before passing the node to
of_iomap(), leaving of_iomap() to consume a node pointer after the caller
had released its reference.
Move of_node_put() after of_iomap() so the node remains referenced for
the mapping operation. The unavailable-node error path already releases
the reference.
Fixes: 4d21be8640 ("clk: at91: pmc: execute suspend/resume only for backup mode")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260529042051.1626978-1-dbgh9129@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
It makes no sense to restore the saved value for a sticky mixer, since
setting any value is a no-op.
However, in some rare cases, SET_CUR is effective despite GET_CUR always
returns a constant value. These mixers are not sticky, but there's no
way to distinguish them. Without any additional information, the best
thing we can do is to set the mixer value to the maximum before bailing
out, so that a soft mixer can still reach the maximum hardware volume if
the mixer turns out to be non-sticky. Meanwhile, all channels must be
synchronized to prevent imbalance volume.
Fixes: 86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky mixers")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260531-uac-sticky-error-path-v1-1-12c2329d17ef@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In most distributions, NetworkManager shuts the device down before
entering system suspend, so fast suspend is typically not used.
On older devices, resume currently tries to grab NIC access to infer
whether the device was powered off while suspended. That probe is only
meaningful for the fast-suspend path where the device is expected to
remain alive.
Unfortunately, for unclear reasons, grabbing NIC access was harmful as
reported in the bugzilla ticket below.
Workaround this issue by simply not grabbing NIC access if fast suspend
is not used.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221501
Assisted-by: GitHub Copilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260531133005.e2ed9e0cd44f.If283625983a843933e0c01561a421daff184e9e9@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
