Clean up bus id allocation by using a common helper and deferring it
until it is needed during adapter registration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name).
Fixes: 35fc37f818 ("i2c: Limit core locking to the necessary sections")
Cc: stable@vger.kernel.org # 2.6.31
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration.
Fixes: 6e13e64184 ("i2c: Add i2c_add_numbered_adapter()")
Cc: stable@vger.kernel.org # 2.6.22
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Runtime PM is disabled by driver core when deregistering a device (and
on registration failure) but add an explicit disable to balance the
enable call when adapter registration fails for symmetry.
Fixes: 23a698fe65 ("i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs")
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clients can be registered from bus notifier callbacks so the debugfs
directory needs to be created before registering the adapter as clients
use that directory as their debugfs parent.
Move debugfs creation before adapter registration to avoid having
clients create their debugfs directories in the debugfs root (which is
also more likely to fail due to name collisions).
Note that failure to allocate the adapter name must now be handled
explicitly as debugfs_create_dir() cannot handle a NULL name (unlike
device_add() which returns an error).
Fixes: 73febd775b ("i2c: create debugfs entry per adapter")
Cc: stable@vger.kernel.org # 6.8
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Drivers must not probe defer after having registered devices as that
will trigger a probe loop if the devices bind to a driver (cf. commit
fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
Move the recovery initialisation, where the GPIO lookup may fail, before
registering the adapter to prevent this.
Fixes: 75820314de ("i2c: core: add generic I2C GPIO recovery")
Cc: stable@vger.kernel.org # 5.9
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
If adapter registration ever fails the release callback would trigger a
NULL-pointer dereference as the completion struct has not been
initialised.
Note that before the offending commit this would instead have resulted
in a minor memory leak of the adapter name.
Fixes: 3f8c4f5e9a ("i2c: core: fix reference leak in i2c_register_adapter()")
Cc: stable@vger.kernel.org
Cc: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clients may be registered from bus notifier callbacks when the adapter
is registered. On a subsequent error during registration, the adapter
references taken by such clients prevent the wait for the references to
be released from ever completing.
Fix this by refactoring client deregistration and deregistering also on
late adapter registration failures.
Fixes: f8756c67b3 ("i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter")
Cc: stable@vger.kernel.org # 4.15
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Make sure to tear down the host notify irq domain on adapter
registration failure to avoid leaking it.
This issue was flagged by Sashiko when reviewing another adapter
registration fix.
Fixes: 4d5538f588 ("i2c: use an IRQ to report Host Notify events, not alert")
Cc: stable@vger.kernel.org # 4.10
Cc: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
MCC_ALLOWED_AP_TYPE_CMD exceeds the fixed copied host-command buffer
and triggers warnings in the gen2 enqueue path when command
0xc05 is sent.
Use IWL_HCMD_DFL_NOCOPY as it was done before the offending commit.
Fixes: 078df640ef ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v2")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260529085453.9af349ab459b.I348df3980764c15efce0099a35fe8a88fb2a6ee2@changeid
TX power constraints must be sent to the firmware before link
activation. If not, the firmware will use default power values.
Fix this by moving the iwl_mld_send_ap_tx_power_constraint_cmd()
call from iwl_mld_start_ap_ibss() to iwl_mld_assign_vif_chanctx(),
before iwl_mld_activate_link() for AP interfaces. Also update
the guard in the function to allow it to run before link activation
for AP interfaces.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260529085453.06c94b01efd2.Id43bdfe5eb030061c23348779687ba71b5f58182@changeid
Convert the repeated register save/restore sequences into macros,
trading some level of implementation trickiness for conciseness (more
than one register can be saved/restored with one invocation) and a
smaller chance of cut and paste errors between VMX and SVM files.
This becomes more useful with the upcoming support for APX, which
would need to add 32 lines to the VM entry/exit paths.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the SEV-ES entry code to use macros for saving guest GPRs,
following VMX/SVM paths. Drop now-unused register offsets and
__VCPU_REGS_* defines.
No functional change intended.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20260512011502.53072-4-chang.seok.bae@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the register save/restore sequences in the SVM entry into macros,
following the VMX code. Drop the now-redundant register offset defines.
No functional change intended.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20260512011502.53072-3-chang.seok.bae@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the repeated register save/restore sequences into macros,
trading some level of implementation trickiness for conciseness (more
than one register can be saved/restored with one invocation) and a
smaller chance of cut and paste errors.
This is particularly useful in preparation for extended GPR support;
upcoming support for APX would need to add 32 lines to the VM entry/exit
paths.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://lore.kernel.org/6e67df0e-e5f0-43f5-aa86-22e8b01b75d2@redhat.com
Link: https://patch.msgid.link/20260512011502.53072-2-chang.seok.bae@intel.com/
[Keep kvm_vcpu_regs.h and put the macros in there. -Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All buses have been converted from driver_set_override() to the generic
driver_override infrastructure introduced in commit cb3d1049f4
("driver core: generalize driver_override in struct device").
Buses now either opt into the generic sysfs callbacks via the
bus_type::driver_override flag, or use device_set_driver_override() /
__device_set_driver_override() directly.
Thus, remove the now-unused driver_set_override() helper.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: e950604782 ("rpmsg: Introduce a driver override mechanism")
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: d765edbb30 ("vmbus: add driver_override support")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 2959ab2470 ("cdx: add the cdx bus driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3cf3857134 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Use nMUX() for USI and UART user muxes to allow reparenting between
OSC and CMU IP output when changing rates, and use DIV_F() with
CLK_SET_RATE_PARENT on their dividers and gates so rate requests
propagate upward.
Consolidate identical USI parent arrays into shared
mout_peric0_nonbususer_p and mout_peric1_nonbususer_p.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Link: https://patch.msgid.link/20260528-perics-usi-v1-1-13a6ee4d1a6f@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit eac69475b0 ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet.
Fixes: eac69475b0 ("media: rc: igorplugusb: heed coherency rules")
Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51
Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5.5
Signed-off-by: Henri A <contact@henrialfonso.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device).
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCahrHyA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymLRgCeN/oLFmGYFHjcJEZ8d0AjKbRS34oAn3r822bO
1mEsGeOojdWNUm4wzu1k
=pf1m
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCahrImA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykedQCfb1CR0Z6lElo/02m3wmR+EfvGyoUAoLj8QU71
dFaLWzZQk8Hb6ajmVYK5
=tgAC
-----END PGP SIGNATURE-----
Merge tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
Here are some small char/misc/iio driver fixes for 7.1-rc6. Included in
here are:
- lots of small IIO driver fixes for reported problems.
- Android binder bugfixes for reported issues.
- small comedi test driver fixes
- counter driver fix
- parport driver fix (people still use this?)
- rpi driver fix
- uio driver fix
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCahrJeQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKIwCfelyNaZgO2yRfSS1fGmzSv3+W8+sAoK5QHkEY
TvJIOm1Cwi8/n3vI42Hz
=EB+S
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH:
"Here are some small char/misc/iio driver fixes for 7.1-rc6. Included
in here are:
- lots of small IIO driver fixes for reported problems.
- Android binder bugfixes for reported issues.
- small comedi test driver fixes
- counter driver fix
- parport driver fix (people still use this?)
- rpi driver fix
- uio driver fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (41 commits)
Revert "gpib: cb7210: Fix region leak when request_irq fails"
misc: rp1: Send IACK on IRQ activate to fix kdump/kexec
gpib: cb7210: Fix region leak when request_irq fails
parport: Fix race between port and client registration
uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory
rust_binder: Avoid holding lock when dropping delivered_death
rust_binder: avoid calling pending_oneway_finished() on TF_UPDATE_TXN
comedi: comedi_test: fix check for valid scan_begin_src in waveform_ai_cmdtest()
comedi: comedi_test: Fix limiting of convert_arg in waveform_ai_cmdtest()
iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw
iio: gyro: itg3200: fix i2c read into the wrong stack location
iio: dac: ad5686: fix powerdown control on dual-channel devices
iio: dac: ad5686: acquire lock when doing powerdown control
iio: temperature: tsys01: fix broken PROM checksum validation
iio: dac: ad3530r: Fix AD3531/AD3531R powerdown mode strings
iio: buffer: hw-consumer: fix use-after-free in error path
iio: dac: ad5686: fix input raw value check
iio: dac: ad5686: fix ref bit initialization for single-channel parts
iio: ssp_sensors: cancel delayed work_refresh on remove
iio: adc: meson-saradc: fix calibration buffer leak on error
...
virtio_i2c_probe() synchronously probes child i2c drivers on the bus,
but peripherals may use the bus at probe for tasks like reading a chip
id. The vhost-user-i2c backend stalls at such probes unless DRIVER_OK
is already set before the virtqueue is first kicked.
Set DRIVER_OK explicitly before i2c_add_adapter(), as done for the
same reason in commit f5866db64f ("virtio_console: enable VQs
early") and commit 71e4b8bf04 ("virtio_rpmsg: set DRIVER_OK before
using device").
Signed-off-by: Alexis Bouzigues <BouziguesAlexis@JohnDeere.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
davinci: fix fallback bus frequency on missing clock-frequency
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCahpiiQAKCRDaeAVmJtMt
bp+eAQDfsx42uAWytASKf7/lFJcPJvlBPXMa5ZwwqtwlBW+jPwEAned0rKUYyIGz
bpVpIO+H3iiaG325v9dxD56rmu9eEwE=
=Vmap
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v7.1-rc6
davinci: fix fallback bus frequency on missing clock-frequency
Fix to point the error offset correctly for eprobe argument error.
In the cleanup commit 1b8b0cd754 ("tracing/probes: Move event parameter
fetching code to common parser"), due to incorrect backward compatibility
aimed at conforming to the test specifications, the error location was set
to 0 when a non-existent formal parameter was specified for Eprobe.
However, this should be corrected in both the test and the implementation
to point correct error position.
Link: https://lore.kernel.org/all/177967567399.209006.1451571244515632097.stgit@devnote2/
Fixes: 1b8b0cd754 ("tracing/probes: Move event parameter fetching code to common parser")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Starting with Rust 1.98.0 (expected 2026-08-20), the target spec will not
support `x86-softfloat` anymore [1]. Instead, `softfloat` should be used,
which is an alias. Otherwise, one gets:
error: error loading target specification: rustc-abi: invalid rustc abi: 'x86-softfloat'. allowed values: 'x86-sse2', 'softfloat' at line 3 column 32
|
= help: run `rustc --print target-list` for a list of built-in targets
Thus conditionally use one or the other depending on the version.
The alias has existed since Rust 1.95.0 (released 2026-04-16) [2], but
use the newer version instead to avoid changing how the build works for
existing compilers, at least until more testing takes place.
Cc: Ralf Jung <post@ralfj.de>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/157151 [1]
Link: https://github.com/rust-lang/rust/pull/151154 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260530114925.260754-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In various code paths, page_table_check_pte_clear() is called
before converting a secure page, while in others it is called
after. Make this consistent and always perform the conversion
after the PTC hook has been called. Also make all conversion‑
eligibility condition checks look the same, and rework the one
in ptep_get_and_clear_full() slightly.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
strlcat() shouldn't be used anymore (see fortify-string.h), and will be
deprecated / removed sooner or later [1].
Therefore remove the s390 implementation of strlcat() in favor of the
generic variant.
[1] https://lore.kernel.org/all/20260514160719.105084-3-manuelebner@mailbox.org/
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
I.e. it's a boot time requirement for the CPU to support it.
This only removes the Kconfig glue, removal of all now
dead !X86_TSC code will happen in a separate patch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-12-mingo@kernel.org
Both GCC [1] and Clang [2] consider the generic version of _THIS_IP_ to
be broken:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
In particular, the address of a label is only expected to be used with a
computed goto.
While the generic version more or less works today, it is known to be
brittle and may break with current and future optimizations. For
example, Clang -O2 always returns 1 when this function is inlined:
static inline unsigned long get_ip(void)
{ return ({ __label__ __here; __here: (unsigned long)&&__here; }); }
Fix it by overriding _THIS_IP_ in <asm/linkage.h> (which is included by
<linux/instruction_pointer.h>) using an architecture-specific inline asm
version. Additionally, avoiding taking the address of a label prevents
compilers from emitting spurious indirect branch targets (e.g. ENDBR or
BTI) under control-flow integrity schemes.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120071 [1]
Link: https://github.com/llvm/llvm-project/issues/138272 [2]
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The HFI sys ops were previously initialized in probe() but, we don't
have firmware loaded at probe time. Since HFI is tightly coupled to
firmware, initialize the HFI sys ops after firmware has been successfully
loaded and booted.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The struct iris_fmt unites pixfmt with the plane type, however the type
from the struct is not actually used. Drop the struct completely and use
u32 pixfmt in all the callsites.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Introduce platform data for X1P42100, derived from SM8550 but using a
different clock configuration and a dedicated OPP setup.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On X1P42100 the Iris block has an extra BSE clock. Wire this clock into
the power on/off sequence.
The BSE clock is used to drive the Bin Stream Engine, which is a sub-block
of the video codec hardware responsible for bitstream-level processing. It
is required to be enabled separately from the core clock to ensure proper
codec operation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The existing iris_vpu_dec_comv_size() used VIDEO_MAX_FRAME (32) as
num_comv count unconditionally when calculating the co-located motion
vector (COMV) buffer size. This resulted in an oversized COMV buffer
allocation throughout decode session, wasting memory regardless of
actual number of buffers required.
For VPU3x and VPU4x platforms, introduce iris_vpu3x_4x_dec_comv_size() to
replace iris_vpu_dec_comv_size(). These derive num_comv dynamically, it
uses inst->fw_min_count once the firmware has reported its buffer
requirements, and fallback to output count during initialization before
firmware has communicated its requirements. This aligns the COMV buffer
size to the actual count needed rather than always allocating with fixed
VIDEO_MAX_FRAME value.
Additionally, during iris_vdec_inst_init(), fw_min_count was initialized
to MIN_BUFFERS instead of 0. This masked the fallback logic and caused the
COMV size calculation to use MIN_BUFFERS even before firmware had reported
its actual requirements. Fix this by initializing fw_min_count to 0.
During testing of 1080p AVC, it reduces the COMV buffer size from 32.89MB
to 6.16MB per decode session, significantly reducing memory consumption.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The driver was using a fixed default FPS value when calculating the VPU
frequency. This caused wrong frequency requests for high‑frame‑rate
streams, for example 4K at 240 FPS. Because of this, the hardware was
running at a lower frequency than needed.
Add the FPS measurement based on the decoder input buffer arrival rate.
The measured FPS is stored per instance and used in frequency calculation
instead of the fixed default FPS. The value is clamped so that it does
not exceed platform limits. Add a VPP firmware overhead when running in
STAGE_2.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Modify iris_hfi_gen1_packet_session_set_property to simplify size
calculations and remove redundant code patterns.
Previously, packet->shdr.hdr.size was incremented by sizeof(u32) in
every switch case, resulting in repetitive and less maintainable
logic.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add hierarchical coding support for both gen1 and gen2 encoders by enabling
the following V4L2 controls:
H264:
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING,
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE,
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER
HEVC(gen2 only):
V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE,
V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for B-frame configuration on both gen1 and gen2 encoders by
enabling V4L2_CID_MPEG_VIDEO_B_FRAMES control.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add Long-Term Reference(LTR) frame support for both gen1 and gen2
encoders by enabling the following V4L2 controls:
V4L2_CID_MPEG_VIDEO_LTR_COUNT
V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES
V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for intra refresh configuration on gen1 encoder by enabling
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD and
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE controls.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The Iris block on SM8350 and SC8280XP is compatible with the Iris
(Venus) on SM8250. Describing in the bindings that the block is Iris v2
and not Venus. Document SM8350 and SC8280XP IP cores, using
qcom,sm8250-venus as a fallback compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
