Record DR6 in emulate_db() and use kvm_queue_exception_p() to set DR6
instead of directly using kvm_set_dr6() in emulation, i.e. rely on the
standard exception path to set DR6 via kvm_deliver_exception_payload().
This keeps the handling of DR6 during #DB injection consistent with other
code paths.
No functional change intended.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
[sean: fix e vs. p goof, add kvm_inject_emulated_db() right away]
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260515222638.1949982-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for sc7180.
Fixes: 858536d9dc ("arm64: dts: qcom: sc7180: Add UFS nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-6-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
monaco.
Fixes: cc9d29aad8 ("arm64: dts: qcom: qcs8300: enable the inline crypto engine")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-5-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for lemans.
Fixes: 96272ba710 ("arm64: dts: qcom: sa8775p: enable the inline crypto engine")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-4-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
kaanapali.
Fixes: 2eeb5767d5 ("arm64: dts: qcom: Introduce Kaanapali SoC")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-3-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
eliza.
Fixes: af20af39fc ("arm64: dts: qcom: Introduce Eliza Soc base dtsi")
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 54a4f0239f ("KVM: MMU: make kvm_mmu_zap_page() return the
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-13-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for milos.
Fixes: 04bb374333 ("arm64: dts: qcom: milos: Add UFS nodes")
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-12-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Flush the current TLB when xAVIC *or* x2AVIC is activated, as KVM is
(apparently) responsible for purging TLB entries when transitioning from
xAVIC to x2AVIC. The APM says a whole lot of nothing about TLB flushing
with respect to (x2)AVIC, but empirical data strongly suggests hardware
also does a whole lot of nothing.
Failure to flush the TLB when enabling x2AVIC can lead to guest accesses
to the APIC base address getting incorrectly redirected to the virtual
APIC page. The flaw most visibly manifests as failures in KVM-Unit-Test's
verify_disabled_apic_mmio() testcase when x2APIC is enabled (though for
reasons unknown, the test only reliably fails with EFI builds).
Fixes: 0ccf3e7cb9 ("KVM: SVM: Flush the "current" TLB when activating AVIC")
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260515171536.1841645-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As all callers in inject_emulated_exception() use "struct x86_exception"
directly, capture it locally instead of using the context.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260515222638.1949982-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move KVM's stuffing of GUEST_PENDING_DBG_EXCEPTIONS.BS when RFLAGS.TF=1 and
MOV/POP SS or STI blocking is active into the exception injection code so
that KVM fixes up the VMCS for all injected #DBs, not only those that are
reflected back into the guest after #DB interception. E.g. if KVM queues
a #DB in the emulator, or more importantly if userspace does save/restore
exactly on the #DB+shadow boundary, then KVM needs to massage the VMCS to
avoid the VM-Entry consistency check.
Opportunistically update the wording of the comment to describe the
behavior as a workaround of flawed CPU behavior/architecture, to make it
clear that the *only* thing KVM is doing is fudging around a consistency
check. Per the SDM:
There are no pending debug exceptions after VM entry if any of the
following are true:
* The VM entry is vectoring with one of the following interruption
types: external interrupt, non-maskable interrupt (NMI), hardware
exception, or privileged software exception.
I.e. forcing GUEST_PENDING_DBG_EXCEPTIONS.BS does *not* impact guest-
visible behavior.
Fixes: b9bed78e2f ("KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow")
Cc: stable@vger.kernel.org
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Closes: https://lore.kernel.org/all/b1a294bc9ed4dae532474a5dc6c8cb6e5962de7c.1757416809.git.houwenlong.hwl@antgroup.com
Reviewed-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://patch.msgid.link/20260515222638.1949982-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_register_mark_dirty() instead of kvm_register_is_dirty() to
actually mark VCPU_EXREG_ERAPS as dirty when emulating
INVPCID_TYPE_SINGLE_CTXT. kvm_register_is_dirty() is a read-only
predicate whose return value is discarded, making the call a no-op.
Without this fix, a single-context INVPCID will not trigger a RAP clear
on the next VMRUN, breaking the ERAPS security guarantee.
Fixes: db5e824964 ("KVM: SVM: Virtualize and advertise support for ERAPS")
Signed-off-by: Emily Ehlert <ehemily@amazon.de>
Link: https://patch.msgid.link/20260518135956.82569-1-ehemily@amazon.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
setup where many RBD devices are frequently mapped and unmapped, marked
for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmoPOcUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6yvB/9+hm+IHQK1gib4gCHOPgq9cD1gj7j8
oegjSmO0tIn3nP1K6wqQfTFnYkE6F37+dRqZTXOUjzi3NlefNJDnxwt9fymp2Y6S
DEobTnRgXSKMxJQ4+cu7jphgbJC/OKYZ+fxJRrKI4hlgZOfQwpvUfQczZZgjWJRz
WqJnSKLoF2k6JDgvokcmt1nyyQ7TrpPRB+6Jz2ATRtG0oxEzp1EN++FtiaRzn1mx
e0WgCBZV/AEFey2YG+Zyhrrg+1nUDWrZI3NgIZz5Q5WU4q/8zF7S9qbNeBQVdzKJ
aZFLxOdQvuRGbLs+g8f6dOMMlDSLnKl2rN2AAzcfwXcmmSQILqLH+ycp
=+cb7
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for an 'rbd unmap' race condition which popped up on a
production setup where many RBD devices are frequently mapped and
unmapped, marked for stable"
* tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client:
rbd: eliminate a race in lock_dwork draining on unmap
Eliza uses a 4-region LLCC register layout made up of two per-bank base
register regions together with the broadcast OR and AND regions.
So add this SoC specific configuration and its compatible string.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260513-eliza-llcc-v2-2-27381ae833d5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Last Level Cache Controller on Eliza SoC. Eliza LLCC has 2
base register regions and an additional AND, OR broadcast region, total 4
register regions.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260513-eliza-llcc-v2-1-27381ae833d5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update cpusys_vm_mem from 256KiB to 4MiB, cpucp_mem from 2MiB to 1MiB
and fix cpucp_scandump_mem node name to match actual reg address.
This matches the downstream memmap and kera-reserved-memory.dtsi.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260412-eliza-reserved-memory-fix-v1-1-05cb3e33a9fe@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The F_GETLK fcntl can work with either read access or write access or
both. It can query F_RDLCK and F_WRLCK locks in either case.
However lockd currently treats F_GETLK similar to F_SETLK in that read
access is required to query an F_RDLCK lock and write access is required
to query a F_WRLCK lock.
This is wrong and can cause problems - e.g. when qemu accesses a
read-only (e.g. iso) filesystem image over NFS (though why it queries
if it can get a write lock - I don't know. But it does, and this works
with local filesystems).
So we need TEST requests to be handled differently. To do this:
- change nlm_do_fopen() to accept O_RDWR as a mode and in that case
succeed if either a O_RDONLY or O_WRONLY file can be opened.
- change nlm_lookup_file() to accept a mode argument from caller,
instead of deducing base on lock time, and pass that on to nlm_do_fopen()
- change nlm4svc_retrieve_args() and nlmsvc_retrieve_args() to detect
TEST requests and pass O_RDWR as a mode to nlm_lookup_file, passing
the same mode as before for other requests. Also set
lock->fl.c.flc_file to whichever file is available for TEST requests.
- change nlmsvc_testlock() to also not calculate the mode, but to use
whatever was stored in lock->fl.c.flc_file.
This behaviour of lockd - requesting O_WRONLY access to TEST for
exclusive locks - has been present at least since git history began.
However it was hidden until recently because knfsd ignored the access
requested by lockd and required only READ access for all locking
requests (unless the underlying filesystem provided an f_op->open
function which checked access permissions).
The commit mentioned in Fixes: below changed nfsd_permission() to NOT
override the access request for LOCK requests and this exposed the bug
that we are now fixing.
Note that there is another issue that this patch does not address.
The flock(.., LOCK_EX) call is permitted on a read-only file descriptor.
Linux NFS maps this to NLM locking as whole-file byte-range locks.
nfsd will see this as though it were fcntl( F_SETLK (F_WRLCK)) and will
now require write access, which it might not be able to get.
It is not clear if this is a problem in practice, or what the best
solution might be. So no attempt is made to address it.
Reported-by: Tj <tj.iam.tj@proton.me>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1128861
Fixes: 4cc9b9f2bf ("nfsd: refine and rename NFSD_MAY_LOCK")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The nfsd_ctl_fh_key_set tracepoint was introduced to capture
operator activity on the filehandle signing key. Earlier revisions
logged the key bytes verbatim; the version that landed hashes the
16 key bytes through crc32_le and stores the result.
CRC32 is a linear projection of its input rather than a one-way
function, and truncating any hash of fixed-size secret material
leaves the key recoverable under offline brute force when the
threat model includes an attacker with access to the trace ring.
The operational question the fingerprint was meant to answer is
whether a NFSD_CMD_THREADS_SET call that carries an
NFSD_A_SERVER_FH_KEY attribute actually replaced the active key or
re-installed the value already in place. Answer that question
directly: compare the incoming key bytes against the current
nn->fh_key inside nfsd_nl_fh_key_set() and surface a single bit to
the tracepoint. The event now prints "updated" when the stored
key changed and "unmodified" otherwise. A first set that fails
kmalloc reports "unmodified" because no key was installed.
Reported-by: jaeyeong <fin@spl.team>
Fixes: 62346217fd ("NFSD: Add a key for signing filehandles")
Cc: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 7b546bd899 ("sunrpc/cache: improve RCU safety in
cache_list walking.") changed the tail of __cache_seq_start()
to unconditionally store
*pos = ((long long)hash << 32) + 1
before returning, dropping a prior "hash >= cd->hash_size"
guard. When the while loop exits because every remaining
bucket was empty, hash equals cd->hash_size, so the stored
*pos is one position past the table's last valid bucket.
seq_read_iter() caches that index in m->index. A subsequent
pread(2) at the same file offset skips traverse() and hands
the stored index back to __cache_seq_start(), which decodes
hash = cd->hash_size and dereferences
cd->hash_table[cd->hash_size] -- one hlist_head past the end
of the kzalloc'd table.
KASAN reports an eight-byte slab-out-of-bounds read at the
tail of the 2048-byte hash_table allocation for the NFSD
export cache (EXPORT_HASHMAX * sizeof(struct hlist_head) ==
256 * 8).
Reject an input hash that is out of range before touching the
hash table. cache_seq_next() already bounds-checks its own
loop; the start routine needs to be symmetric.
Reported-by: syzbot+60cfa08822470bbebe44@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=60cfa08822470bbebe44
Fixes: 7b546bd899 ("sunrpc/cache: improve RCU safety in cache_list walking.")
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a node for the IMEM found on Eliza, which contains pil-reloc-info
and the modem tables for IPA, among others.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260418-eliza-imem-v3-3-bfbd499b6e77@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm DTS uses sorting of MMIO nodes by the unit address, so move
few nodes in Eliza DTSI to fix that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20260418-eliza-imem-v3-1-bfbd499b6e77@pm.me
[bjorn: Rebased on top of branch]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user
know events were dropped.
But the clearing of the missed_events happened when the tracing system
queried the ring buffer iterator about missed events. This was premature
as the ring buffer is per CPU, and the tracing code reads all the
CPU buffers and checks for missed events when it is read. If the
CPU iterator that had missed events isn't printed next, the output
for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next event
and not when the missed_events flag is queried. Also clear it on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized
too early and gets cleared later on, making it zero and not reflect
the actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page
it is expected that: page = load_page(va); -> unload_page(page).
But the code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never
was created making every build do the work even when it was already
done previously.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCag8l7BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qga3AQDkyh7V4T+fxY5gc5jSKVx5U9bRAMpJ
3GWGNCY9TGUyewEApUNO5MVGvXttyc1ONPHuBcShynj3resJk90sk491kw0=
=aY8d
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user know
events were dropped.
But the clearing of the missed_events happened when the tracing
system queried the ring buffer iterator about missed events. This was
premature as the ring buffer is per CPU, and the tracing code reads
all the CPU buffers and checks for missed events when it is read. If
the CPU iterator that had missed events isn't printed next, the
output for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next
event and not when the missed_events flag is queried. Also clear it
on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized too
early and gets cleared later on, making it zero and not reflect the
actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page it
is expected that: page = load_page(va); -> unload_page(page). But the
code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never was
created making every build do the work even when it was already done
previously.
* tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Create output file from cmd_check_undefined
tracing: Fix unload_page for simple_ring_buffer init rollback
tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm()
ring-buffer: Flush and stop persistent ring buffer on panic
ring-buffer: Fix reporting of missed events in iterator
Add the SpacemiT K3 QSPI compatible to the fsl-qspi binding.
K3 and K1 use the same QSPI controller, so document the K3 compatible
with "spacemit,k1-qspi" as fallback.
Signed-off-by: Cody Kang <cody.kang.hk@outlook.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260521-k3-pico-itx-qspi-v2-for-next-20260521-v2-1-52bce26e5fd8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Describe the missing Eliza SoC nodes for the QUPv3 WRAP1 and WRAP2 serial
engines, add the matching GPI DMA controllers, the SDHCI controllers and
the LLCC system cache controller.
Also add the TLMM pinctrl states for the QUPv3 serial engines and the
SD card/eMMC interfaces, plus OPP tables for the SDHCI controllers.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-eliza-dts-fix-debug-uart-and-more-support-v2-2-5ad3da81b9d3@oss.qualcomm.com
[bjorn: Temporarily replaced SLAVE_SDCC_1 with the constant]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add driver for the Qualcomm interconnect buses found in Hawi
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pair.
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-icc-hawi-v4-2-35447fdc482b@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Document the RPMh Network-On-Chip interconnect for the Qualcomm Hawi SoC.
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-icc-hawi-v4-1-35447fdc482b@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The Eliza MTP debug UART is QUPv3 WRAP2 SE5. The existing DTS labels it
as uart14, but the serial-engine index for this block is actually 13.
Rename the SoC UART label and pinctrl state to uart13 and update the MTP
alias and node reference accordingly.
Fixes: af20af39fc ("arm64: dts: qcom: Introduce Eliza Soc base dtsi")
Fixes: 2a5d4fc6f3 ("arm64: dts: qcom: eliza: Enable Eliza MTP board support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-eliza-dts-fix-debug-uart-and-more-support-v2-1-5ad3da81b9d3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable display on USB DisplayPort on MTP board with Eliza SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-dts-qcom-eliza-display-v3-3-9e46401f467a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Eliza MTP features a single USB Type-C port. Its USB 2.0 lines are
routed through an eUSB2 repeater provided by the PM7550BA PMIC.
Describe the port and repeater, and enable the USB controller and PHYs.
Also specify the ADSP firmware and enable the remoteproc.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-3-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Eliza, the SPMI arbiter supports multiple bus masters, requiring
explicit selection of the master for each PMIC.
The existing PM7550BA dtsi does not provide a way to describe this,
so introduce an Eliza-specific variant with the appropriate bus
configuration.
This duplication is required due to hardware differences in how the
SPMI bus is exposed on this platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-2-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the ADSP remoteproc node along with its dependencies, including
the IPCC mailbox, AOSS QMP and SMP2P links used for communication.
The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP
combo PHY and an SNPS eUSB2 PHY. Describe them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-1-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to calculate the current time if the sample is going to
be filtered.
Move the assignment close to uvc_video_clock_add_sample().
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-6-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
We only save relevant samples into the circular buffer. If the data is
very similar to the previous one, exit early, this allows us to avoid
some expensive operations such as usb_get_current_frame_number().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-5-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some UVC 1.1 cameras running in fast isochronous mode tend to spam the
USB host with a lot of empty packets. These packets contain clock
information and are added to the clock buffer but do not add any
accuracy to the calculation. In fact, it is quite the opposite, in our
calculations, only the first and the last timestamp is used, and we only
have 32 slots.
Ignore the samples that will produce less than MIN_HW_TIMESTAMP_DIFF
data.
Fixes: 141270bd95 ("media: uvcvideo: Refactor clock circular buffer")
Cc: stable@vger.kernel.org
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-4-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In the initial version we set the min value to 250msec. Looks like
100msec can also provide a good value.
Now that we are at it, add a macro to make it cleaner.
Fixes: 6243c83be6 ("media: uvcvideo: Allow hw clock updates with buffers not full")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-3-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In some situations, even with a full clock buffer, it does not contain
250msec of data. This results in the driver jumping back from software
to hardware timestapsing creating a nasty artifact in the video.
If the clock buffer is full, use it to calculate the timestamp instead
of defaulting to software stamps, the reduced accuracy is less visible
than jumping from one timestamping mechanism to the other.
Fixes: 6243c83be6 ("media: uvcvideo: Allow hw clock updates with buffers not full")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-2-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
To avoid filling the clock circular buffer with duplicated data we only
add it if the new value sof is different than the last added sof.
The issue is that we compare the unprocess sof with the processed sof.
If there is a sof_offset, or UVC_QUIRK_INVALID_DEVICE_SOF is enabled,
the comparison will not work as expected.
This patch moves the comparison to the right place.
Fixes: 141270bd95 ("media: uvcvideo: Refactor clock circular buffer")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260513-uvc-hwtimestamp-v3-1-7a64838b0b02@chromium.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If the metadata queue that is empty receives a new buffer while we are
in the middle of processing a frame, the first metadata buffer will
contain partial information.
Avoid this by tracking the state of the metadata buffer and making sure
that it is in sync with the data buffer.
Now that we are at it, make sure that we skip buffers of size 1 or 0.
They are not allowed by the spec... but it is a simple check to add and
better be safe than sorry.
Fixes: 088ead2552 ("media: uvcvideo: Add a metadata device node")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260417-uvc-meta-partial-v2-2-31d274af7d2d@chromium.org
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Do not re-implement uvc_queue_get_current_buffer() logic inside
uvc_video_complete(), just call the function.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260417-uvc-meta-partial-v2-1-31d274af7d2d@chromium.org
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If a UVC camera has an asynchronous control, uvc_status_stop may be
called from async_ctrl.work:
uvc_ctrl_status_event_work()
uvc_ctrl_status_event()
uvc_ctrl_clear_handle()
uvc_pm_put()
uvc_status_put()
uvc_status_stop()
cancel_work_sync()
This will cause a deadlock, since cancel_work_sync will wait for
uvc_ctrl_status_event_work to complete before returning.
Fix this by returning early from uvc_status_stop if we are currently in
the work function. flush_status now remains false until uvc_status_start
is called again, ensuring that uvc_ctrl_status_event_work won't resubmit
the URB.
Fixes: a32d9c41bd ("media: uvcvideo: Make power management granular")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/6733bdfb-3e88-479f-8956-ab09c04c433e@linux.dev/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260316155823.1855434-1-sean.anderson@linux.dev
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it.
Fixes: b0077e269f ("blk-mq: make sure active queue usage is held for bio_integrity_prep()")
Fixes: 7b4f36cd22 ("block: ensure we hold a queue reference when using queue limits")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260521190253.242065-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the pcm512x chipset driver, pcm512x_overclock_xxx_put() is defined as
a general mixer kcontrol instead of a DAPM kcontrol, so struct
snd_soc_dapm_context must not be accessed via
snd_soc_dapm_kcontrol_to_dapm().
This causes a NULL pointer dereference, so it must be modified to use
snd_soc_component_to_dapm().
Cc: stable@kernel.org
Closes: https://github.com/raspberrypi/linux/issues/7242
Fixes: 02dbbb7e98 ("ASoC: codecs: pcm512x: convert to snd_soc_dapm_xxx()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20260521113712.227438-1-aha310510@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Derivative of Panther Lake with P-cores and low power E-cores intended
for use in harsh environments.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260515180224.13818-1-tony.luck@intel.com
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
