[Why]
Unreachable Code;
Copy Constructor Deleted;
Local Declaration Hides Parameter;
Local Declaration Hides Outer Scope;
Uninitialized or Suspicious Memory Use.
[How]
- Removed or refactored unreachable code paths
- Ensured proper copy constructors in C++ classes
- Renamed local variables that shadowed function parameters
- Renamed inner loop/block variables to avoid shadowing outer scope
Fixed in 8 files across several FPU layers
Also fixed in color_gamma and cs_funcs modules
- Reordered guard conditions to validate pipe type before accessing stream
- Ensures safe memory access patterns in DC DMUB service layer
All changes maintain backward compatibility and preserve functional behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In dml2_translation_helper.c, rename the inner loop index inside
dml2_init_soc_states() for several project cases
to avoid shadowing the outer function-scope index variable.
In display_mode_core.c, replace shift-based power-of-two expressions
used to compute dpte_row_height and dpte_row_height_linear with an
equivalent floating-point power function, consistent with existing
usage elsewhere in the file.
Behavior for valid inputs is preserved in both cases.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings in DC paths
to keep builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against unsigned
counters (for example pipe_count, num_states, and resource-cap counters), plus a
small number of mixed signed/unsigned checks in writeback and clock-related assertions.
[How]
Aligned iterator and temporary variable types with the semantic type of the compared
bounds. Used unsigned indices for loops bounded by unsigned counters, and retained signed
types where values are semantically signed (for example arithmetic with sentinel or signed
intermediate values). Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or split assertions (for example non-negative signed-cap
checks before unsigned comparisons) instead of broad type changes.
No functional behavior changes are intended; this is a warning-resolution and
type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Opening the CRC data file during active rendering can fail with -EINVAL.
The wait for commit->hw_done returns remaining jiffies on success, but
the CRC path was treating that as an error.
[How]
Handle wait_for_completion_interruptible_timeout() correctly:
positive return as success, 0 as timeout, and negative as error.
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode change, replay_event_general_ui may remain set on the old
stream while replay_event_hw_programming is set. This can re-enable
Replay too early before hardware programming is complete.
[How]
Clear replay_event_general_ui in the mode-change path when setting
replay_event_hw_programming to keep Replay blocked until programming
finishes, avoiding white screen on OLED panels after boot.
Reviewed-by: Sunpeng Li <sunpeng.li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
fix refresh rate round up case
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function mes_v12_1_map_test_bo incorrectly returned 0 unconditionallyon error path,
which would hide the real error code and mislead upperlayers about the failure status.
Fix it by returning the correct error code 'r' instead of 0.
Fixes: 44e5195fa3 ("drm/amdgpu/mes_v12_1: add mes self test");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15.0.8 enabled-feature query to
smu_cmn_send_smc_msg_with_params() so it uses the common SMU
multi-msgs helper.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15.0.0 table transfer path and enabled-feature query to
smu_cmn_send_smc_msg_with_params() so both paths use the common SMU
multi-msgs helper.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix lock inversions pointed out by Prike and Sunil. The hang detection
timeout *CAN'T* grab locks under which we wait for fences, especially
not the userq_mutex lock.
Then instead of this completely broken handling with the
hang_detect_fence just cancel the work when fences are processed and
re-start if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Well the reset handling seems broken on multiple levels.
As first step of fixing this remove most calls to the hang detection.
That function should only be called after we run into a timeout! And *NOT*
as random check spread over the code in multiple places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This one was fortunately not looking so bad as the wait ioctl path, but
there were still a few things which could be fixed/improved:
1. Allocating with GFP_ATOMIC was quite unnecessary, we can do that
before taking the userq_lock.
2. Use a new mutex as protection for the fence_drv_xa so that we can do
memory allocations while holding it.
3. Starting the reset timer is unnecessary when the fence is already
signaled when we create it.
4. Cleanup error handling, avoid trying to free the queue when we don't
even got one.
v2: fix incorrect usage of xa_find, destroy the new mutex on error
v3: cleanup ref ordering
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15 table address messages to
smu_cmn_send_smc_msg_with_params() so they use the common SMU
multi-msgs helper instead of open-coding struct smu_msg_args.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU15 driver messages can carry multiple input parameters and return
values, but callers still have to build struct smu_msg_args directly.
Add common SMU multi-msgs helpers in smu_cmn and reuse them in the
single-parameter wrapper and the shared table transfer path.
Keep smu_cmn_send_smc_msg() semantics unchanged for older callers.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The purpose of a GPU reset is to make sure that fence can be signaled
again and the signal and resume workers can make progress again.
So waiting for the resume worker or any fence in the GPU reset path is
just utterly nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add pinctrl support for the SoC0 instance of the ASPEED AST2700.
AST2700 consists of two interconnected SoC instances, each with its own
pinctrl register block.
The SoC0 pinctrl hardware closely follows the design found in previous
ASPEED BMC generations, allowing the driver to build upon the common
ASPEED pinctrl infrastructure.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a device tree binding for the pin controller found in the
ASPEED AST2700 SoC0.
The controller manages various peripheral functions such as eMMC, USB,
VGA DDC, JTAG, and PCIe root complex signals.
Describe the AST2700 SoC0 pin controller using standard pin multiplexing
and configuration properties.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take
the pinctrl mutex. This causes a gpiochip operations to need to sleep.
Worse yet, the .can_sleep field in the gpiochip is not set. This causes
the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check
whether it can use a spinlock or needs a mutex. In this case, it ends
up taking a spinlock, then calls pinctrl_gpio_direction_output(), which
takes a mutex. This causes a huge warning.
Since the Mediatek hardware has separate clear/set registers, there is
no risk of clobbering other bits like with a read-modify-write pattern.
Also, once the GPIO function is selected / muxed in, further GPIO
operations do not involve pinctrl operations or state. The GPIO direction
and level values do not require toggling the pinmux or any other pin config
options.
Switch to directly calling mtk_pmx_gpio_set_direction() in the GPIO set
direction callbacks to avoid taking the pinctrl mutex. Drop the
.gpio_set_direction field in mtk_pmx_ops to signal we are no longer using
the pinctrl GPIO layer for setting the direction.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take
the pinctrl mutex. This causes a gpiochip operations to need to sleep.
Worse yet, the .can_sleep field in the gpiochip is not set. This causes
the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check
whether it can use a spinlock or needs a mutex. In this case, it ends
up taking a spinlock, then calls pinctrl_gpio_direction_output(), which
takes a mutex. This causes a huge warning.
While this class of Mediatek hardware does not have separate clear/set
registers, the pinctrl context has a spinlock that is taken whenever
a register read-modify-write is done. Also, once the GPIO function is
selected / muxed in, further GPIO operations do not involve pinctrl
operations or state. The GPIO direction and level values do not require
toggling the pinmux or any other pin config options.
Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO
set direction callbacks to avoid taking the pinctrl mutex. Drop the
.gpio_set_direction field in mtk_pmxops to signal we are no longer using
the pinctrl GPIO layer for setting the direction.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Bump `KFD_IOCTL_MINOR_VERSION` from 22 to 23 and document version 1.23
in `kfd_ioctl.h` so userspace can detect profiler ioctl support.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this by skipping the sysfs disable mapping when the GPU is
currently undergoing a reset or suspend flow.
Additionally, add debug logging in psp_ptl_invoke() to better
trace PTL state and format queries/updates cmd.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During RAS UE-triggered GPU reset, gfx_v9_4_3_hw_fini() attempts to
send a PTL disable command to PSP. Since PSP is unresponsive at that
point, this produces spurious error logs on all hive nodes:
PTL command 0xa0000001 failed, PSP response status: 0xFFFFFFFF
PTL initialization failed (-5)
Skip the PTL disable command when GPU reset is in progress, as PTL
will be properly re-initialized during post-reset recovery via
gfx_v9_4_3_late_init().
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only set the bit when PTL is actually being disabled (state=0)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Downgrade unhalt_cpsch warning to dev_dbg when sched is already stopped
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move amdgpu_amdkfd_stop/start_sched calls from kfd_ptl_control()
into amdgpu_ptl_perf_monitor_ctrl() so all PTL callers (KFD ioctl,
sysfs, GFX init) get consistent scheduling management.
Add amdgpu_amdkfd_stop/start_sched_all() wrappers to stop and
restart KFD scheduling on all nodes without assuming node ID ordering.
v3:
* call start/stop for PTL Set Only
v2:
* move the stop/start sched function to
amdgpu_ptl_perf_monitor_ctrl(Lijo)
* add wrapper amdgpu_amdkfd_stop_sched_all and
amdgpu_amdkfd_start_sched_all (Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC 9.4.4 uses SPI busy status for idle detection instead of GRBM GUI_ACTIVE.
Add version check to use SPI_BUSY for 9.4.4 while keeping GRBM_STATUS
GUI_ACTIVE check for other GC versions.
v2: move this check into amdgpu_ptl_perf_monitor_ctrl(Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an explicit check on cmd->resp.status after psp_cmd_submit_buf()
returns to ensure PTL state is only updated on actual success.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure GFX engine is idle before switching PTL state to prevent
register access violations and CP hang. This addresses the race
condition where in-flight GPU commands could conflict with PTL
state changes.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add F8 and VECTOR to amdgpu_ptl_fmt and PSP format mapping.
Update PTL format strings and GFX format enum to keep PSP/KFD in sync.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a bitmap to track PTL disable requests from sysfs and profiler.
PTL is only re-enabled once all sources have released their disable
requests, avoiding premature enablement.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop the scheduler before releasing the PTL disable request to ensure
the GPU is quiescent during the PTL state transition. This prevents
potential queue preemption failures and GPU resets caused by modifying
PTL state while waves are executing
v1->v2:
only stop/start the scheduler when the PTL state actually needs to transition(Yifan)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new IOCTL option to allow userspace explicit control over
the Peak Tops Limiter (PTL) state for profiling
Link: https://github.com/ROCm/rocm-systems/tree/develop/projects/rocprofiler-sdk
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PTL (Peak Tops Limiter) feature exposes per-GPU sysfs files under
/sys/class/drm/cardX/device/ptl/ to allow users to enable or disable PTL,
configure preferred data formats, and query supported formats. The usage
of these sysfs files is not always obvious, so add documentation to
describe their purpose and provide concrete usage examples.
V3 changes:
* format show will display preferred formats instead of N/A (Alex)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add kgd->ptl_ctrl() callback so KFD can query/enable/disable
PTL state through the PSP performance monitor interface.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce hardware detection, runtime state tracking and a
kgd->ptl_ctrl() callback to enable/disable/query PTL via the
PSP performance-monitor interface (commands 0xA0000000/1).
The driver now exposes PTL capability to KFD and keeps the
software state in sync with the hardware.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a Peak Tops Limiter (PTL) driver that dynamically caps
engine frequency to ensure delivered TOPS never exceeds a defined
TOPS_limit. This initial implementation provides core data structures
and kernel-space interfaces (set/get, enable/disable) to manage PTL state.
PTL performs a firmware handshake to initialize its state and update
predefined format types. It supports updating these format types at
runtime while user-space tools automatically switch PTL state, and
also allows explicitly switching PTL state via newly added commands.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce new psp interfaces and structures for performance
monitoring hardware control.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_ioctl_profiler takes a similar approach to that of
kfd_ioctl_dbg_trap (which contains debugger related IOCTL
services) where kfd_ioctl_profiler will contain all profiler
related IOCTL services. The IOCTL is designed to be expanded
as needed to support additional profiler functionality.
The current functionality of the IOCTL is to allow for profilers
which need PMC counters from GPU devices to both signal to other
profilers that may be on the system that the device has active PMC
profiling taking place on it (multiple PMC profilers on the same
device can result in corrupted counter data) and to setup the device
to allow for the collection of SQ PMC data on all queues on the device.
For PMC data for the SQ block (such as SQ_WAVES) to be available
to a profiler, mmPERFCOUNT_ENABLE must be set on the queues. When
profiling a single process, the profiler can inject PM4 packets into
each queue to turn on PERFCOUNT_ENABLE. When profiling system wide,
the profiler does not have this option and must have a way to turn
on profiling for queues in which it cannot inject packets into directly.
Accomplishing this requires a few steps:
1. Checking if the user has the necessary permissions to profile system
wide on the device. This check uses the same check that linux perf
uses to determine if a user has the necessary permissions to profile
at this scope (primarily if the process has CAP_SYS_PERFMON or is root).
2. Locking the device for profiling. This is done by setting a lock bit
on the device struct and storing the process that locked the device.
3. Iterating all queues on the device and issuing an MQD Update to enable
perfcounting on the queues.
4. Actions to cleanup if the process exits or releases the lock.
The IOCTL also contains a link to the existing PC Sampling IOCTL as well.
This is per a suggestion that we should potentially remove the PC Sampling
IOCTL to have it be a part of the profiler IOCTL. This is a future change.
In addition, we do expect to expand the profiler IOCTL to include
additional profiler functionality in the future (which necessitates the
use of a version number).
v2: sqaush in proper IOCTL number
Proposed userpace support:
40abc95a64
Signed-off-by: Benjamin Welton <benjamin.welton@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
Cc: stable@vger.kernel.org
Fixes: 01bb86b380 ("driver core: Add fwnode_init()")
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511074927.9473-1-bartosz.golaszewski@oss.qualcomm.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The old format to define pinctrl settings for imx in DT has two hierarchy
levels. The first level are function device nodes. The second level are
pingroups which contain a property fsl,pins. The original ntention was to
define all pin functions in a single dtsi file and just reference the
correct ones in the board files.
The commit ("5fcdf6a7ed pinctrl: imx: Allow parsing DT without function
nodes") already make moden i.MX chip support flatten layout.
Make legacy chipes (more than 15 years) support this flatten layout also.
Fixes: e948cbdc41 ("ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy")
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The tryget_task_struct() calls in scx_sub_disable(),
scx_root_enable_workfn() and scx_sub_enable_workfn() can never fail at
the points they're invoked:
- scx_root_enable_workfn() iterates over scx_tasks under scx_tasks_lock
and rq lock. sched_ext_dead() removes tasks from scx_tasks under the
same scx_tasks_lock before put_task_struct_rcu_user() runs in
finish_task_switch(). So any task observed in scx_tasks must have
usage > 0; put_task_struct_rcu_user() hasn't been called and the
delayed_put_task_struct() callback that decrements usage cannot have
been queued.
- scx_sub_disable() and scx_sub_enable_workfn() iterate via
css_task_iter, which takes a reference on each task in
css_task_iter_next() and holds it until the next iter_next() call, so
usage > 0 is guaranteed by the iter itself.
The actual filter for dead tasks is the SCX_TASK_DEAD check inside
scx_task_iter_next_locked(), not tryget; tryget only fails on zero
usage, a state that can't be reached for tasks visible to these iters.
Commit b7d4b28db7 ("sched_ext: Use SCX_TASK_READY test instead of
tryget_task_struct() during class switch") removed an analogous tryget
in the class-switch loop. Convert the remaining tryget calls to plain
get_task_struct() and update the comment in scx_root_enable_workfn()
that suggested tasks could be observed with zero @usage waiting for an
RCU grace period.
Link: https://lore.kernel.org/all/agCLBxHEUqWIepx8@google.com
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The benchmark drives the workqueue's affinity_scope through sysfs by
filp_open()'ing /sys/bus/workqueue/devices/bench_wq/affinity_scope. When
CONFIG_TEST_WORKQUEUE=y, the module_init runs during kernel init before
userspace has mounted sysfs, so every open returns -ENOENT and the
benchmark loop spins emitting:
test_workqueue: open /sys/bus/workqueue/devices/bench_wq/affinity_scope failed: -2
Mirror the TEST_BPF pattern and add "depends on m" so Kconfig will not
let this be built into the kernel image, and document the reason in the
help text.
Fixes: 24b2e73f97 ("workqueue: add test_workqueue benchmark module")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The apply_wqattrs_lock()/unlock() helpers were introduced by
commit a0111cf671 ("workqueue: separate out and refactor the locking
of applying attrs") to encapsulate the get_online_cpus() (later
cpus_read_lock()) + mutex_lock(&wq_pool_mutex) acquire pair that was
duplicated across the apply-attrs paths.
Since commit 19af457573 ("workqueue: Remove cpus_read_lock() from
apply_wqattrs_lock()") removed the cpus_read_lock() (pwq creation and
installation now operate on wq_online_cpumask, so CPU hotplug no longer
needs to be excluded), the wrappers have been one-line forwarders to
mutex_lock(&wq_pool_mutex)/mutex_unlock(&wq_pool_mutex).
They no longer encode any non-trivial locking rule and obscure the fact
that callers just take the existing wq_pool_mutex. This align with the
"unnecessary" helpers that got discussed in [1]
Inline the eight call sites and remove the wrappers. No functional
change.
Link: https://lore.kernel.org/all/afs_44-6ToJJVZTn@gmail.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
Cc: stable@vger.kernel.org
Fixes: dcbc919a5d ("libceph: switch osdmap decoding to use ceph_decode_entity_addr")
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
