Found these commented out enum values, while checking for block comment
issues with checkpatch.pl. These seem to be ok to remove for cleanup.
I verified via:
git grep 'RT_STATUS_' drivers/staging/rtl8723bs/
to check there are no other occurrences.
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260507050011.17066-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Found a block comment formatting warning in odm_interface.h
via checkpatch.pl. As far as I can tell, this block comment is no
longer useful. Hence proposing to remove it.
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260505185431.27037-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the device tree node for the Verisilicon IOMMU present
in the RK3588 SoC.
This IOMMU handles address translation for the VPU hardware blocks.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The Verisilicon IOMMU hardware block can be found in combination
with Verisilicon hardware video codecs (encoders or decoders) on
different SoCs.
Enable it will allow us to use non contiguous memory allocators
for Verisilicon video codecs.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add a device tree binding for the Verisilicon (VSI) IOMMU.
This IOMMU sits in front of hardware encoder and decoder
blocks on SoCs using Verisilicon IP, such as the Rockchip RK3588.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Renames the CamelCase variable 'pvMem' in struct sm750_dev to 'vmem'.
Dropping the pointer prefix 'p'.
This fixes the following checkpatch.pl check:
CHECK: Avoid CamelCase: <pvMem>
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260510062908.67848-2-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace remaining pr_err() calls with netdev_err() where a net device
is available to provide better context in error messages.
Lines in skb_to_mep() are left as pr_err() since no net device
context is available there.
Signed-off-by: Maha Maryam Javaid <mahamaryamjavaid@gmail.com>
Link: https://patch.msgid.link/20260508060438.20156-1-mahamaryamjavaid@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove two instances of `ret = 0` initializations since the variable
is overridden unconditionally before being used.
Signed-off-by: Ahmet Sezgin Duran <ahmet@sezginduran.net>
Link: https://patch.msgid.link/20260504204612.55657-1-ahmet@sezginduran.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight. Add
support for this GPIO controller.
Tested-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-2-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight.
Add bindings for these GPIO controllers. As overall integration might be
not very obvious (and it differs significantly from the bindings used by
the original drivers), provide complete example with the on-board
regulators and the DSI panel.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-1-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The debugfs summary currently shows the power sequencing device's name.
This is not really helpful since the device name is always "pwrseq.N".
Also print the parent device's name. This would likely be the device
node name from the device tree, something like "nvme-connector". This
would make it much easier for the developer to associate the summary
with a certain device.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260507052943.3133349-1-wenst@chromium.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write().
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Fixes: 7a4ee419e8 ("iommu/amd: Add debugfs support to dump IOMMU MMIO registers")
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Replace explicit comparisons against zero with logical Not operator.
This follows the standard kernel coding style for boolean logic.
No functional changes.
Signed-off-by: Shyam Sunder Reddy Padira <shyamsunderreddypadira@gmail.com>
Link: https://patch.msgid.link/20260505200145.160377-1-shyamsunderreddypadira@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove redundant NULL initialization for list iterator because
variables used as iterators in list_for_each_entry() do not require
initialization, as the macro assigns them before first use.
No functional change.
Signed-off-by: Shyam Sunder Reddy Padira <shyamsunderreddypadira@gmail.com>
Link: https://patch.msgid.link/20260505192320.107936-1-shyamsunderreddypadira@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SB IOAPIC is on the device 0xb from Hygon family 18h model 4h.
Signed-off-by: Fu Hao <fuhao@open-hieco.net>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Under heavy concurrent attach/detach operations, scx_claim_exit() can
trigger a NULL pointer dereference. This can be reproduced running the
reload_loop kselftests inside a virtme-ng session:
$ vng -v -- ./tools/testing/selftests/sched_ext/runner -t reload_loop
...
BUG: kernel NULL pointer dereference, address: 0000000000000400
RIP: 0010:scx_claim_exit+0x3b/0x120
Call Trace:
<TASK>
bpf_scx_unreg+0x45/0xb0
bpf_struct_ops_map_link_dealloc+0x39/0x50
bpf_link_release+0x18/0x20
__fput+0x10b/0x2e0
__x64_sys_close+0x47/0xa0
The underlying race (diagnosed by Tejun Heo) is a stomp of @ops->priv,
not a missing NULL check:
T2 unreg(K) T1 reg(K)
----------- ---------
sch = ops->priv = sch_b800
scx_disable; flush_disable_work
[scx_root_disable: scx_root=NULL,
mutex_unlock, state=DISABLED]
mutex_lock; state ok
scx_alloc_and_add_sched:
ops->priv = sch_a800
scx_root = sch_a800; init=0
state=ENABLED; mutex_unlock
[flush returns]
RCU_INIT_POINTER(ops->priv, NULL) <-- clobbers sch_a800
kobject_put(sch_b800)
T1 acquires scx_enable_mutex inside scx_root_disable()'s mutex_unlock
window and starts a fresh attach on the same kdata, assigning sch_a800
to @ops->priv. T2 then continues out of scx_disable()/flush_disable_work
and clobbers @ops->priv to NULL, leaking sch_a800; the bpf_link is gone
but state stays SCX_ENABLED, so all future attaches fail with -EBUSY
permanently. The next bpf_scx_unreg() on that kdata then reads NULL
@ops->priv and dereferences it in scx_claim_exit().
Make @ops->priv the lifecycle binding: in scx_root_enable_workfn() and
scx_sub_enable_workfn(), after the existing state check and still under
scx_enable_mutex, refuse with -EBUSY if @ops->priv is non-NULL. This
rejects an attempt to reuse a kdata that is still bound to a previous
scheduler instance, closing the race without changing the unreg side.
Fixes: 105dcd005b ("sched_ext: Introduce scx_prog_sched()")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Exclusion ranges in IVMD are treated as unity mappings with r&w
permissions since commit 0bbe4ced53 ("iommu/amd: Fix the
overwritten field in IVMD header"), using 1:1 mappings. And IOMMU
Exclusion Base & Range Limit Registers (0x0020/0x0028) are actually
no longer used.
As a result, several definitions and code paths became dead code:
- exclusion_start/exclusion_length in struct amd_iommu are never
assigned,
- iommu_set_exclusion_range() always returns 0 now.
- MMIO_EXCL_ENABLE_MASK & MMIO_EXCL_ALLOW_MASK are only used by
the removed iommu_set_exclusion_range().
- DEV_ENTRY_EX is no longer set in any DTE.
- IOMMU_UNITY_MAP_FLAG_EXCL_RANGE is no longer set, thus the
IOMMU_RESV_RESERVED branch in amd_iommu_get_resv_regions() is
no longer reachable.
Just remove all of the dead code. No functional change.
Signed-off-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The termios definitions are provided by the termios.h header file which
is included by tty.h so drop the redundant asm/termbits.h include
directive.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the missing atomic.h include to the two driver that use it but did
not include it directly.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
This driver no longer uses anything from atomic.h so drop the unused
include directive.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
These drivers (and usb-serial.c) no longer use anything from
moduleparam.h so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
These drivers (and usb-serial.c) no longer use anything from uaccess.h
directly so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the missing uaccess.h include, which is needed since TIOCSRS485
support was added, instead of relying on the header being included
indirectly.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
These drivers (and usb-serial.c) no longer use anything from tty_flip.h
directly so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
USB serial drivers do not use anything from tty_driver.h directly (only
core does) so drop the unnecessary include directives.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Update a stale comment about which of the legacy modes is visible to the
user, i.e. can be forced via amd_iommu_intr=legacy.
Fixes: b74aa02d7a ("iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Wei Wang <wei.w.wang@hotmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Bail early from enable_iommus_vapic() if IOMMUs are configured for either
of the legacy modes, as it's absurdly difficult to see that
iommu_ga_log_enable() is guaranteed to fail because iommu_init_ga_log()
skips allocating the ga_log.
Opportunistically have iommu_ga_log_enable() WARN if it's called without
IOMMUs being configured to support AVIC/vAPIC.
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Prefer to use === instead of --- for top level section heading
underlines to allow using the latter for sub-headings later.
While at it, fix the underline lenghts where needed.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/f49968792220ca3ff24efde813550850340d092e.1778235406.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Nowadays, the display support for drm/i915 and drm/xe is shared between
the drivers, even though the code is located under drm/i915/display.
The drm/i915 documentation has everything, including display topics, in
one huge page, while the drm/xe documentation is well-organized but
hardly mentions display. It's not great, to put it mildly.
Split out the Intel display documentation to a dedicated directory,
Documentation/gpu/intel-display. Also directly split the
functionality/feature documentation to dedicated pages to keep the main
index page high level and readable. We'll want to organize this further,
but just sort them alphabetically for starters.
Drop the boilerplate documentation sections that don't actually document
anything.
Cross-reference drm/i915, drm/xe, and intel-display.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/21bfa7777eb0926eadd309d4c6f5c9cf48405cf0.1778235406.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In preparation for adding support for 3, 5, 6 and 7 port devices, replace
the current one-bit-per-type encoding of the number of ports with a more
compact four bit encoding (2..16 ports or undefined).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Now that all panel drivers use devm_drm_panel_alloc(),
there are no external callers of drm_panel_init().
Make it static to prevent new users from bypassing the
refcounted allocation path.
Remove stale references to drm_panel_init() in kdocs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-10-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-9-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-8-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-7-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-6-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-5-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-4-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-3-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-2-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety. Also deduplicate the prepare_prev_first
assignment that was set both before and after drm_panel_init().
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-1-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Fix the error path during DDI encoder/connector initialization by
calling the missing TC port cleanup function.
This fixes the leaked TC port state.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260507065940.2046690-1-imre.deak@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoA87keHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsnAIAJENovWOPJnq6XOM
GcnwSFG+xsv5kfSXU9+ZgP2WnoHJGoWCon2T69+dyVrthmMxFcPub1UM+VI0M+LP
Eo894JhbAlpej4Z0f6I4L6eE9RMq2vc3UW3ga1WK6R9IYJ3WE1kEur64zJJoBvX1
SPj4oxpI/S02KxLT8F2Sq5PVS4lvaDwK/N2mTB5JNjZE24iUMYc/4nPFNFpVKhgb
qfpMOk4VGjfgRexVksskm8pVO6FAWXUMQTGUUYSpzv5f2avGAyP8o+m3dHIs366+
Y/xVLADTtW7z4pu3eTw5hZLhbTekElFfLTsSPqWwqCiu0zA5s3HjRHMo3xbhHkwT
0zXS2H0=
=j7EH
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc3' into staging-next
We need the staging fixes in here to build off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoA87keHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsnAIAJENovWOPJnq6XOM
GcnwSFG+xsv5kfSXU9+ZgP2WnoHJGoWCon2T69+dyVrthmMxFcPub1UM+VI0M+LP
Eo894JhbAlpej4Z0f6I4L6eE9RMq2vc3UW3ga1WK6R9IYJ3WE1kEur64zJJoBvX1
SPj4oxpI/S02KxLT8F2Sq5PVS4lvaDwK/N2mTB5JNjZE24iUMYc/4nPFNFpVKhgb
qfpMOk4VGjfgRexVksskm8pVO6FAWXUMQTGUUYSpzv5f2avGAyP8o+m3dHIs366+
Y/xVLADTtW7z4pu3eTw5hZLhbTekElFfLTsSPqWwqCiu0zA5s3HjRHMo3xbhHkwT
0zXS2H0=
=j7EH
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc3' into usb-next
We need the USB fixes in here as well to test and work off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reboot hangs on T113s boards because no restart handler is
available.
Enable the SoC watchdog whose driver registers a restart handler.
Tested on LCPI-PC-T113/F113.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Link: https://patch.msgid.link/20260506-t113-mangopi-reboot-hang-v3-1-fa15a360a520@mmpsystems.pl
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
