When batadv_tp_start() or batadv_tp_init_recv() fail to allocate a new
tp_vars object, the previously incremented bat_priv->tp_num counter is
never decremented. This causes tp_num to drift upward on each allocation
failure. Since only BATADV_TP_MAX_NUM sessions can be started and the count
is never reduced for these failed allocations, it causes to an exhaustion
of throughput meter sessions. In worst case, no new throughput meter
session can be started until the mesh interface is removed.
The error handling must decrement tp_num releasing the lock and aborting
the creation of an throughput meter session
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: avoid bonding logic for outgoing OGM]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The Lontium LT9211 is capable of 1..4 DSI lanes per input DSI port,
describe the lane count for each input port in the schema.
For example Linux kernel driver does already use that information and
fails to probe if it is missing.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407203109.34302-1-marex@nabladev.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
xe_bo_recompute_purgeable_state() walks all VMAs of a BO to determine
whether the BO can be made purgeable. This makes VMA create/destroy and
madvise updates O(n) in the number of mappings.
Replace the walk with BO-local counters protected by the BO dma-resv
lock:
- vma_count tracks the number of VMAs mapping the BO.
- willneed_count tracks active WILLNEED holders, including WILLNEED
VMAs and active dma-buf exports for non-imported BOs.
A DONTNEED BO is promoted back to WILLNEED on a 0->1 transition of
willneed_count. A BO is demoted to DONTNEED on a 1->0 transition only
when it still has VMAs, preserving the previous behaviour where a BO
with no mappings keeps its current madvise state.
PURGED remains terminal, preserving the existing "once purged, always
purged" rule.
Fixes: 4f44961eab ("drm/xe/vm: Prevent binding of purged buffer objects")
v2:
- Use early return for imported BOs in all four helpers to avoid
nesting (Matt B).
- Group purgeability state into a purgeable sub-struct on struct
xe_bo (Matt B).
- Reword xe_bo_willneed_put_locked() kernel-doc to explain that a 1->0
transition means all remaining active VMAs are DONTNEED (Matt B).
v3:
- Move DONTNEED/PURGED reject from vma_lock_and_validate() into
xe_vma_create(), gated on attr->purgeable_state == WILLNEED.
Fixes vm_bind bypass and partial-unbind rejection on DONTNEED
BOs (Matt B).
- Drop .check_purged from MAP and REMAP; keep it for PREFETCH and
add a comment why (Matt B).
- Skip BO validation in vma_lock_and_validate() for non-WILLNEED
VMA remnants so cleanup/remap paths do not repopulate
DONTNEED/PURGED BOs.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260506132027.2556046-1-arvind.yadav@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
When 0 is written to the tasks file it is interpreted as the current task in
rdtgroup_move_task(). Each CPU's idle task has task_struct::pid set to 0 and,
on x86, task_struct::closid to RESCTRL_RESERVED_CLOSID and task_struct::rmid
to RESCTRL_RESERVED_RMID.
Equivalently, on MPAM platforms, thread_info::mpam_partid_pmg is encoded with
PARTID and PMG set to RESCTRL_RESERVED_CLOSID and RESCTRL_RESERVED_RMID,
respectively. As there is no interface to change these from the default, the
resctrl configuration for the idle tasks is fixed and they always behave
equivalently to a task in the default tasks file and so take their
configuration from the cpus/cpus_list files.
On read of the tasks file, show_rdt_tasks() filters out any 0 PID. Hence, a
task id of 0 is never shown in the tasks file and the idle tasks are not
represented either.
Document the user visible behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
When using automatic counter assignment it's useful for a user to know
which counters they can expect to be assigned on group creation.
Document that automatic counter assignment is best effort and how to
discover any assignment failures.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
In mbm_event mode, with mbm_assign_on_mkdir set to 1, when a user creates a
new CTRL_MON or MON group resctrl attempts to allocate counters for each of
the supported MBM events on each resctrl domain. As counters are limited,
such allocation may fail and when it does counter allocations for the
remaining domains are skipped even if the domains have available counters.
Because of that, the user needs to view the resource group'smbm_L3_assignments
file to get an accurate view of counter assignment in a new resource group and
then manually create counters in the skipped domains with available counters.
Writes to mbm_L3_assignments using the wildcard format, <event>:*=e, also skip
counter allocation in other domains after a counter allocation failure.
When handling a request to create counters in all domains it is unnecessary
for a counter allocation in one domain to prevent counter allocation in
other domains. Always attempt to allocate all the counters requested.
[ bp: Massage commit message. ]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
There was a potential race condition in change_handle. The ioctl
briefly had a single object with two idr entries; a concurrent
gem_close could delete the object and remove one of the handles
while leaving the other one dangling, which could subsequently
be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecf drm: Release driver references to handle before making it available again)
First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem.
(bd46cece51 drm/gem: Fix race in drm_gem_handle_create_tail())
It idr_allocs the new handle with NULL, then swaps in the correct
object later to avoid races. We don't need to do that here, since
the only operations that could race are drm_prime, and
change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths
Signed-off-by: David Francis <David.Francis@amd.com>
Co-authored-by: Dave Airlie <airlied@gmail.com>
Reported-by: Puttimet Thammasaeng <pwn8official@gmail.com>
Tested-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Christian Koenig <Christian.Koenig@amd.com>
Fixes: 53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Signed-off-by: Dave Airlie <airlied@redhat.com>
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org
Fixes: fe806e4992 ("cfg80211: support profile split between elements")
Signed-off-by: John Walker <johnwalker0@gmail.com>
Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that i486 and CONFIG_MELAN support has been removed upstream:
8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support")
the CONFIG_ELAN_CPUFREQ and CONFIG_SC520_CPUFREQ cpufreq
drivers can be removed as well, as they depend on CONFIG_MELAN.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org (open list:CPU FREQUENCY SCALING FRAMEWORK)
Link: https://lore.kernel.org/r/20250425084216.3913608-8-mingo@kernel.org
Now that all enabling code is gone, remove the
FPU emulation library as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-11-mingo@kernel.org
Without math emulation there's no point to this option.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-10-mingo@kernel.org
Now that support for 486 CPUs is gone upstream, remove
the x86 mathemu code integration.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-9-mingo@kernel.org
Recent changes to the EPP unit test tries to perform a driver switch
with a cpufreq_policy reference held when the driver is loaded into
anything but the active mode which leads to a circular dependency and
the unit test hanging indefinitely.
Drop the reference before driver switch and grab it back once the driver
mode is stabilized for the test.
The EPP writes are only possible with CPUFREQ_POLICY_POWERSAVE policy.
Temporarily switch the cpudata->policy (while holding the write end of
the policy->rwsem) to CPUFREQ_POLICY_POWERSAVE and restore the original
policy once tests are done. To ensure the final EPP is correct in case
the driver started with CPUFREQ_POLICY_PERFORMANCE, EPP performance is
tested last.
The __free() based cleanup for cpufreq_policy is lost in the process.
Reported-by: Kalpana Shetty <kalpana.shetty@amd.com>
Fixes: 7e173bc310 ("cpufreq/amd-pstate-ut: Add a unit test for raw EPP")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-7-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
If "dynamic_epp" is disabled, the driver initialization and the default
EPP selection from sysfs currently sets the EPP based on the power
supply state of the system at that time but there is no power supply
callbacks registered to toggle it when the power supply state changes.
This can lead to faster battery drain on platforms that start off while
being plugged to the wall but later move to battery power since the EPP
stays at AMD_CPPC_EPP_PERFORMANCE.
Use "epp_default_dc" as the default EPP selection when dynamic_epp is
disabled, restoring older behavior. On servers, this defaults to
AMD_CPPC_EPP_PERFORMANCE and on other platforms, it defaults to
AMD_CPPC_EPP_BALANCE_PERFORMANCE.
Fixes: e30ca6dd53 ("cpufreq/amd-pstate: Add dynamic energy performance preference")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-6-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
An active power supply notifier can race with amd_pstate_epp_cpu_exit()
trying to reset the floor perf and can overwrite the floor perf set in
MSR_AMD_CPPC_REQ.
Unregister the notifier before setting the floor perf to prevent the
rare race.
Fixes: e30ca6dd53 ("cpufreq/amd-pstate: Add dynamic energy performance preference")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-5-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Writing the current "dynamic_epp" state to sysfs fails with -EINVAL even
though the desired result was achieved. Allow writes to "dynamic_epp"
that does not modify the state.
Fixes: e30ca6dd53 ("cpufreq/amd-pstate: Add dynamic energy performance preference")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-4-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Failure to allocate profile name will return -EINVAL from
platform_profile_register() while in fact, it is a failure to allocate
memory for the profile_name string.
Return -ENOMEM when kasprintf() fails to allocate profile_name string.
Fixes: e30ca6dd53 ("cpufreq/amd-pstate: Add dynamic energy performance preference")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-3-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Concurrently changing driver mode and dynamic_epp with:
echo passive > /sys/devices/system/cpu/amd_pstate/status&
echo disable > /sys/devices/system/cpu/amd_pstate/dynamic_epp&
hits the WARN_ON_ONCE() in static_key_disable_cpuslocked() and hangs the
system since both sysfs writes are trying to do
amd_pstate_change_driver_mode() without any synchronization.
Grab the "amd_pstate_driver_lock" mutex when modifying "dynamic_epp" to
prevent the two paths from racing with each other. Add a lockdep
assertion for "amd_pstate_driver_lock" in
amd_pstate_change_driver_mode() to formalize the dependency.
Since "cppc_mode" is stable under "amd_pstate_driver_lock", only reload
the driver when in "AMD_PSTATE_ACTIVE" mode and reject all writes when
in passive or guided mode, or if the driver is not loaded, since only
active mode operates on EPP.
Fixes: e30ca6dd53 ("cpufreq/amd-pstate: Add dynamic energy performance preference")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260508051748.10484-2-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
-----BEGIN PGP SIGNATURE-----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=kWIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
We have pre-defined ISA extension macros, here use those macros to
replace a magic number for isa2hwcap definition and some array
indexing for isa2hwcap access.
This doesn't change the original functionality, just improve the code
maintainability and readability.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20260506132152.53239-1-hui.wang@canonical.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Document the Always-On Subsystem (AOSS) side channel found on the Qualcomm
Eliza SoC. It is used for communication with other clients, like
remoteprocs.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260504-eliza-bindings-aoss-v2-1-c3628ca79a25@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the compatible for the PMIC GLINK interface found on the
Qualcomm Eliza SoC.
It is fully compatible with the one found on SM8550, so use that as
fallback.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260504-eliza-bindings-pmic-glink-v2-1-d6b5397b7899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without this path, the interconnect framework cannot
correctly vote for the bandwidth required by QSPI DMA data transfers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-7-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without it, the interconnect framework cannot vote for
the bandwidth required by QSPI DMA data transfers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-6-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS615 Ride board has a SPI-NOR flash connected to the QSPI controller
on CS0. Enable the QSPI controller and add the corresponding SPI-NOR flash
node to allow the system to access it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-5-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Talos (QCS615) platform includes a QSPI controller used for accessing
external flash storage. Add the QSPI OPP table, TLMM pinmux entries, and
the QSPI controller node to enable support for this hardware.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-4-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On almost all Qualcomm platforms, including Glymur, there is a Crypto
engine IP block to which the CPU can off-load cryptographic computations
for achieving acceleration.
The engine is also DMA capable due to the presence of an associated Bus
Access Manager (BAM) module.
Describe the Crypto engine and its BAM.
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-glymur_crypto_enablement-v2-2-bf115aeb1459@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for the BAM DAM and QCE crypto engine.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407-crypto-qcom-eliza-v1-2-40f61a1454a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Running the kprobes sanity tests twice makes all tests fail and
eventually crashes the kernel.
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# Totals: pass:5 fail:0 skip:0 total:5
ok 1 kprobes_test
[root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run
...
# test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64
Expected 0 == register_kprobe(&kp), but
register_kprobe(&kp) == -22 (0xffffffffffffffea)
...
Unable to handle kernel paging request ...
The testsuite defines several kprobes and kretprobes as static variables
that are preserved across test runs.
After register_kprobe and unregister_kprobe, a kprobe contains some
leftover data that must be cleared before the kprobe can be registered
again. The tests are setting symbol_name to define the probe location.
Address and flags must be cleared.
The existing code clears some of the probes between subsequent tests, but
not between two test runs. The leftover data from a previous test run
makes the registrations fail in the next run.
Move the cleanups for all kprobes into kprobes_test_init, this function
is called before each single test (including the first test of a test
run).
Link: https://lore.kernel.org/all/20260507134615.1010905-1-martin@kaiser.cx/
Fixes: e44e81c5b9 ("kprobes: convert tests to kunit")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When kprobe_add_area_blacklist() iterates through a section like
.kprobes.text, the start address may not correspond to a named symbol.
On ARM64 with CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y (introduced by
commit baaf553d3b ("arm64: Implement
HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")), the compiler flag
-fpatchable-function-entry=4,2 inserts 2 NOPs before each function entry
point for ftrace call_ops. These pre-function NOPs sit at the section base
address, before the first named function symbol. The compiler emits a $x
mapping symbol at offset 0x00 to mark the start of code, but
find_kallsyms_symbol() ignores mapping symbols.
Without CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS (e.g. defconfig), no
pre-function NOPs are inserted, the first function starts at offset
0x00, and the bug does not trigger.
This only affects modules that have a .kprobes.text section (i.e. those
using the __kprobes annotation). Modules using NOKPROBE_SYMBOL() instead
(like kretprobe_example.ko) blacklist exact function addresses via the
_kprobe_blacklist section and are not affected.
For kprobe_example.ko on ARM64 with -fpatchable-function-entry=4,2,
the .kprobes.text section layout is:
offset 0x00: $x + 2 NOPs (mapping symbol + ftrace preamble)
offset 0x08: handler_post (64 bytes)
offset 0x50: handler_pre (68 bytes)
kprobe_add_area_blacklist() starts iterating from the section base
address (offset 0x00), which only has the $x mapping symbol.
kprobe_add_ksym_blacklist() then calls kallsyms_lookup_size_offset()
for this address, which goes through:
kallsyms_lookup_size_offset()
-> module_address_lookup()
-> find_kallsyms_symbol()
find_kallsyms_symbol() scans all module symbols to find the closest
preceding symbol.
Since no named text symbol exists at offset 0x00,
find_kallsyms_symbol() picks __UNIQUE_ID_vermagic (a .modinfo symbol
whose address is in the temporary image) as the "best" match. The
computed "size" = next_text_symbol - modinfo_symbol spans across
these two unrelated memory regions, creating a blacklist entry with
a bogus range of tens of terabytes.
Whether this causes a visible failure depends on address randomization,
here is what happens on Raspberry Pi 4/5:
- On RPi5, the bogus size was ~35 TB. start + size stayed within
64-bit range, so the blacklist entry covered the entire kernel
text. register_kprobe() in the module's own init function failed
with -EINVAL.
- On RPi4, the bogus size was ~75 TB. start + size overflowed
64 bits and wrapped to a small address near zero. The range
check (addr >= start && addr < end) then failed because end
wrapped around, so the bogus entry was accidentally harmless
and kprobes worked by luck.
The same bug exists on both machines, but randomization determines whether
the integer overflow masks it or not.
Fix this by adding notrace to the __kprobes macro. Functions in
.kprobes.text are kprobe infrastructure handlers that should never be
traced by ftrace. With notrace, the compiler stops inserting them and the
non-symbol gap at the section start disappears entirely.
Link: https://lore.kernel.org/all/20260506012706.2785785-1-jianpeng.chang.cn@windriver.com/
Fixes: baaf553d3b ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
A MIPS allmodconfig build with LLVM fails during modpost:
ERROR: modpost: "__udivdi3"
[sound/soc/tegra/snd-soc-tegra210-mixer.ko] undefined!
tegra210_mixer_configure_gain() divides a 64-bit BIT_ULL() value by the
fade duration. On 32-bit MIPS, clang emits a call to __udivdi3 for that
plain C division, but that compiler helper is not exported to modules.
Use div_u64() for the inverse duration calculation so the driver uses the
kernel's 64-bit division helper instead of emitting a compiler runtime
call.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260507232131.438589-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l+qi
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Allow for multiple opens of /sys/fs/selinux/policy
Prevent a single process from blocking others from reading the
SELinux policy loaded in the kernel. This does have the side effect
of potentially allowing userspace to trigger additional kernel memory
allocations as part of the open/read operation, but this is mitigated
by requiring the SELinux security/read_policy permission.
- Reduce the critical sections where the SELinux policy mutex is held
This includes the patch to the policy loader code where we move the
permission checks and an allocation outside the mutex as well as the
the patch to checkreqprot which drops the code/lock entirely.
While the checkreqprot code had effectively been dropped in an
earlier release, portions of the code still remained that would have
triggered the mutex to perform an IMA measurement. This finally drops
all of that while preserving the user visible behavior.
- Eliminate potential sources of log spamming
There were a few areas where processes could flood the system logs
and hide other, more critical events. The previously disabled
checkreqprot and runtime disable knobs in selinuxfs were two such
areas that have now been greatly simplified and a pr_err() replaced
with a pr_err_once().
The third such place is the /sys/fs/selinux/user file, which hasn't
been used by a userspace release since 2020 and was scheduled for
removal after 2025; this effectively disables this functionality, but
similar to checkreqprot, it is done in a way that should not break
old userspace.
* tag 'selinux-pr-20260507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: shrink critical section in sel_write_load()
selinux: allow multiple opens of /sys/fs/selinux/policy
selinux: prune /sys/fs/selinux/user
selinux: prune /sys/fs/selinux/disable
selinux: prune /sys/fs/selinux/checkreqprot
W=1 with CONFIG_EXT_SUB_SCHED=n flags 'err_msg' uninitialized and
'err_free_lb_resched' unused. Initialize err_msg and gate the label.
Signed-off-by: Tejun Heo <tj@kernel.org>
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
process_register_request() allocates an expectation and then checks
whether a conntrack helper is available. If helper lookup fails, the
function returns early and the allocated expectation is left behind.
Reorder the code to fetch and validate helper before calling
nf_ct_expect_alloc(). This keeps the logic simpler and removes the leak
path while preserving existing behavior.
Fixes: e14575fa75 ("netfilter: nf_conntrack: use rcu accessors where needed")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ensure the expectation tuple and mask attributes are present in netlink
message, otherwise null-ptr-deref is possible.
Fixes: bd07793705 ("netfilter: nfnetlink_queue: allow to attach expectations to conntracks")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A recent series to fix expectations broke helper propagation via
expectation, this mechanism is used by the sip and h323 helper. This
also propagates the conntrack helper to expected connections. I changed
semantics of exp->helper which now tells us the actual helper that
created the expectation.
Add an explicit assign_helper field to expectations for this purpose
and update helpers to use it.
Restore this feature for userspace conntrack helper via ctnetlink
nfqueue integration so it is again possible to attach a helper to an
expectation, where it makes sense. This is not restored via ctnetlink
expectation creation as there is no client for such feature. Use the
expectation layer 4 protocol number for the helper lookup for
consistency.
Make sure the expectation using this helper propagation mechanism also
go away when the helper is unregistered.
Fixes: 9c42bc9db9 ("netfilter: nf_conntrack_expect: honor expectation helper field")
Fixes: 917b61fa20 ("netfilter: ctnetlink: ignore explicit helper on new expectations")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables.
Fixes: 5b53951cfc ("netfilter: ebtables: use net_generic infra")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to the previous ebtables patch:
template add exposes the table to userspace, we must do this last to
rnsure the pernet ops are set up (contain the destructors).
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sashiko reported for a related patch:
In modules like iptable_raw.c, [..], if register_pernet_subsys() fails,
the rollback might call kfree(rawtable_ops) before [..]
During this window, could a concurrent userspace process find the globally
visible template, trigger table_init(), [..]
The table init functions must always register the template last.
Otherwise, set/getsockopt can instantiate a table in a namespace
while the required pernet ops (contain the destructor) isn't available.
This change is also required in x_tables, handled in followup change.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the module is going away we need to zap the template
first. Else there is a small race window where userspace
could instantiate a new table after the pernet exit function
has removed the current table.
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani.
Fixes: f9006acc8d ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Fixes: ee177a5441 ("netfilter: ip6_tables: pass table pointer via nf_hook_ops")
Fixes: ae68933422 ("netfilter: ip_tables: pass table pointer via nf_hook_ops")
Link: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
