At the moment we emit the audit log a bit too early, which makes it
necessary to also emit an unregister log in case we have to unwind
errors after possible hook register failure.
Followup patch will be slightly simpler if we can delay the
register message until after the hooks have been wired up.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ads7871_read_reg16() function relies on spi_w8r16() to read the
16-bit sensor output. The ADS7871 device transmits the Least Significant
Byte (LSB) first.
On Little-Endian architectures, spi_w8r16() correctly reconstructs the
16-bit value. However, on Big-Endian architectures, the byte swapping
causes the first received byte (LSB) to be placed in the most significant
byte of the u16, resulting in corrupted voltage readings.
To fix this, cast the integer result of spi_w8r16() to a restricted
__le16 type and convert it to the host CPU's native byte order using
le16_to_cpu(). Negative error codes returned by the SPI core are caught
and returned prior to the conversion to avoid mangling the error status.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260418034601.90226-1-tabreztalks@gmail.com
Fixes: e0c70b8078 ("hwmon: add TI ads7871 a/d converter driver")
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Link: https://lore.kernel.org/r/20260502020844.110038-2-tabreztalks@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sensors configurations are defined by set and clear masks. These
do not follow a consistent "clear mask is a superset of set mask"
rule. This relaxed definition breaks lm75_write_config()
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
Basically all bits from set_mask that are not defined in clr_mask are
dropped. Fix that by enhancing the helper to always combine clr_mask
and set_mask into the mask bits of regmap_update_bits().
Fixes: 6da24a25f7 ("hwmon: (lm75) Hide register size differences in regmap access functions")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://lore.kernel.org/r/20260502173207.3567876-3-markus.stockhausen@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The initialization of the AS6200 has two shortcomings
- The device-add-commit states "Conversion mode: continuous" but the
the lm75_params structure uses set_mask = 0x94c0. This activates
single shot mode (bit 15). According to the datasheet "The device
features a single shot measurement mode if the device is in sleep
mode (SM=1)". This is quite contradictionary.
- It is the only device that activates polarity active-high (bit 10)
All this is paired with a undefined clear mask bug in function
lm75_write_config() that was introduced with a later refactoring
commit.
[as6200] = {
.config_reg_16bits = true,
.set_mask = 0x94C0,
-> .clr_mask not defined here
.default_resolution = 12,
...
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
regmap_update_bits() requires clr_mask to be a superset of set_mask.
So basically all sensors with "wrong" masks like the AS6200 are not
initialized as intended.
Fix that by
- Change the set_mask to 0xc010 to reflect the current active-low
setup properly and to drive the sensor in continous mode. This
takes into account that the config register is little endian and
the first byte sent to the chip is the LSB.
- Adapt the alarm handling so it can report the alarm correctly
even if it is high active. This is done by comparing config register
bit 5 and 10 (translated to 2 and 13).
This commit does not introduce any ABI breakage as the mutliple bugs
effectly drive the AS6200 in standard active-low mode.
Fixes: 4b6358e1fe ("hwmon: (lm75) Add AMS AS6200 temperature sensor")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://lore.kernel.org/r/20260502173207.3567876-2-markus.stockhausen@gmx.de
[groeck: Update set_mask for as6200 further: As modeled, the upper bits
contain the conversion rate, so the config register needs to be set to
0xc010 instead of 0x10c0 to reflect 8 samples/s and 4 consecutive faults.
Fix the same problem for TMP112.]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status (Gustavo)
- Fix EAGAIN sign in pf_migration_consume (Shuicheng)
- Fix MMIO access using PF view instead of VF view during migration (Shuicheng)
- Exclude indirect ring state page from ADS engine state size (Satya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/afw5lsrjE4pStEml@gsse-cloud1.jf.intel.com
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCafvHOQAKCRBFlHeO1qrK
LsJDAPsEb5Kmth5WyT3cgJxNFVTLebkzMZ1OdNkTnJ8PHstNTAEA7wj0t2nB8lJz
Xy3qh75pKfrBt597MUVyhZY/z9+6gw0=
=EWEG
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-fixes
DRM Rust fixes for v7.1-rc3
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DIBZJ40ZC4J3.Y1DLA7JTS2PC@kernel.org
When fallocate() with FALLOC_FL_KEEP_SIZE preallocates an extent past the
current i_size, the file_extent_tree of the inode is updated to cover
that range. However, on the next mount, btrfs_read_locked_inode() only
re-populates file_extent_tree with [0, round_up(i_size, sectorsize)),
losing the marks that belonged to the KEEP_SIZE prealloc extent beyond
i_size.
Later, when a non-KEEP_SIZE fallocate() extends i_size into / past that
old prealloc extent, the reservation loop in btrfs_fallocate() skips
already-prealloc segments and does not call into the path that marks the
file_extent_tree, so a gap remains inside the file_extent_tree across
[old_aligned_i_size, start_of_new_alloc). Then __btrfs_prealloc_file_range()
calls btrfs_inode_safe_disk_i_size_write(), which uses
find_contiguous_extent_bit() starting at offset 0 to derive disk_i_size.
The walk stops at the gap, so disk_i_size ends up smaller than i_size and
gets persisted. After the next mount, the file shows the wrong (smaller)
size.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/sdi
DEV=/dev/sdi
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
# KEEP_SIZE prealloc beyond i_size (i_size stays 0)
fallocate -n -o 4M -l 4M $MNT/file1
umount $MNT
mount $DEV $MNT
# non-KEEP_SIZE fallocate that overlaps the previous prealloc tail
# and extends past it
fallocate -o 7M -l 2M $MNT/file1
ls -lh $MNT/file1
umount $MNT
mount $DEV $MNT
ls -lh $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
-rw-rw-r-- 1 root root 9.0M May 4 16:35 /mnt/sdi/file1
-rw-rw-r-- 1 root root 7.0M May 4 16:35 /mnt/sdi/file1
The size before the second mount is correct (9M), but after the
remount it drops to 7M, i.e. the start of the gap inside file_extent_tree.
Fix this in __btrfs_prealloc_file_range() by marking the entire range
[round_down(old_i_size, sectorsize), round_up(new_i_size, sectorsize))
in file_extent_tree before updating i_size and calling
btrfs_inode_safe_disk_i_size_write(). This ensures the contiguous bit
search starting from 0 is not truncated by a stale gap left behind by a
previous KEEP_SIZE prealloc that was not restored on inode load.
The fix has no effect when the NO_HOLES feature is enabled because
btrfs_inode_safe_disk_i_size_write() and
btrfs_inode_set_file_extent_range()
both take the fast path that directly tracks disk_i_size without
consulting file_extent_tree.
Fixes: 9ddc959e80 ("btrfs: use the file extent tree infrastructure")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
[ Minor updates to the change log ]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
[FIX]
Normally such dirty ebs won't cause problems, as when the iput() is
called on the btree inode, the dirty ebs will be forcibly written back,
and since the fs is already in an error status, such writeback will not
reach disk and finish immediately.
But it's still better to get rid of such dirty ebs, if we ended up with
dirty ebs but the fs is not in an error status, then such writeback at
iput() time will be too late, as all workers are already stopped but
writeback will utilize workers, which will lead to NULL pointer
dereferences.
Instead of unconditionally calling btrfs_extent_io_tree_release(), only
call it if btrfs_write_and_wait_transaction() finished successfully, so
that @dirty_pages extent io tree is kept untouched for transaction
cleanup.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db14 ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A build workload newly prints order-0 allocation failures on 7.1-rc1:
sh: page allocation failure: order:0
mode:0x14084a(__GFP_HIGHMEM|__GFP_MOVABLE|__GFP_IO|__GFP_KSWAPD_RECLAIM|
__GFP_COMP|__GFP_HARDWALL)
CPU: 27 UID: 1000 PID: 855540 Comm: sh Not tainted 7.1.0-rc1-llvm-00058-gdca922e019dd #1 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
warn_alloc+0xeb/0x100
__alloc_pages_slowpath+0x567/0x5a0
? filemap_get_entry+0x11a/0x140
__alloc_frozen_pages_noprof+0x249/0x2d0
alloc_pages_mpol+0xe4/0x180
folio_alloc_noprof+0x80/0xa0
add_ra_bio_pages+0x13c/0x4b0
btrfs_submit_compressed_read+0x229/0x300
submit_one_bio+0x9e/0xe0
btrfs_readahead+0x185/0x1a0
[...]
(lldb) source list -a add_ra_bio_pages+0x13c
.../vmlinux.unstripped add_ra_bio_pages + 316 at .../fs/btrfs/compression.c:454:8
451
452 folio = filemap_alloc_folio(mapping_gfp_constraint(mapping, constraint_gfp),
453 0, NULL);
-> 454 if (!folio)
455 break;
I can reproduce this consistently by running a memory hog concurrently
with a buffered writer on a machine with a very large amount of swap.
Commit 7ae37b2c94 ("btrfs: prevent direct reclaim during compressed
readahead") clearly intended to suppress these warnings. But because the
mask set in the address_space with mapping_set_gfp_mask() doesn't include
__GFP_NOWARN, mapping_gfp_constraint() removes it from constraint_gfp
before it is passed to filemap_alloc_folio().
Fix by refactoring the code to add __GFP_NOWARN after the call to
mapping_gfp_constraint().
Fixes: 7ae37b2c94 ("btrfs: prevent direct reclaim during compressed readahead")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
A corrupted image with a chunk present in the chunk tree but whose
corresponding block group item is missing from the extent tree can be
mounted successfully, even though check_chunk_block_group_mappings()
is supposed to catch exactly this corruption at mount time. Once
mounted, running btrfs balance with a usage filter (-dusage=N or
-dusage=min..max) triggers a null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
RIP: 0010:chunk_usage_filter fs/btrfs/volumes.c:3874 [inline]
RIP: 0010:should_balance_chunk fs/btrfs/volumes.c:4018 [inline]
RIP: 0010:__btrfs_balance fs/btrfs/volumes.c:4172 [inline]
RIP: 0010:btrfs_balance+0x2024/0x42b0 fs/btrfs/volumes.c:4604
[CAUSE]
The crash occurs because __btrfs_balance() iterates the on-disk chunk
tree, finds the orphaned chunk, calls chunk_usage_filter() (or
chunk_usage_range_filter()), which queries the in-memory block group
cache via btrfs_lookup_block_group(). Since no block group was ever
inserted for this chunk, the lookup returns NULL, and the subsequent
dereference of cache->used crashes.
check_chunk_block_group_mappings() uses btrfs_find_chunk_map() to
iterate the in-memory chunk map (fs_info->mapping_tree):
map = btrfs_find_chunk_map(fs_info, start, 1);
With @start = 0 and @length = 1, btrfs_find_chunk_map() looks for a
chunk map that *contains* the logical address 0. If no chunk contains
logical address 0, btrfs_find_chunk_map(fs_info, 0, 1) returns NULL
immediately and the loop breaks after the very first iteration,
having checked zero chunks. The entire verification function is therefore
a no-op, and the corrupted image passes the mount-time check undetected.
[FIX]
Replace the btrfs_find_chunk_map() based loop with a direct in-order
walk of fs_info->mapping_tree using rb_first_cached() + rb_next().
This guarantees that every chunk map in the tree is visited regardless
of the logical addresses involved.
No lock is taken around the traversal. This function is called during
mount from btrfs_read_block_groups(), which is invoked from open_ctree()
before any background threads (cleaner, transaction kthread, etc.) are
started. There are therefore no concurrent writers that could modify
mapping_tree at this point. An analogous lockless direct traversal of
mapping_tree already exists in fill_dummy_bgs() in the same file.
Since we walk the rb-tree directly via rb_entry() without going through
btrfs_find_chunk_map(), no reference is taken on each map entry, so the
btrfs_free_chunk_map() calls are also removed.
Signed-off-by: ZhengYuan Huang <gality369@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
scx_find_sub_sched()'s only caller, scx_bpf_sub_dispatch(), is gated on
CONFIG_EXT_SUB_SCHED. When CONFIG_EXT_SUB_SCHED=n the caller compiles out
and the stub becomes dead code, tripping -Wunused-function on randconfigs.
Drop the stub.
Fixes: 25037af712 ("sched_ext: Add rhashtable lookup for sub-schedulers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202605080556.42PXw8U9-lkp@intel.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken.
Reported-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=217eb327242d08197efb
Tested-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com
Fixes: a431930c9b ("hfs: fix slab-out-of-bounds in hfs_bnode_read()")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260505111300.3592757-3-tristmd@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Since prepare_alloc_pages() unconditionally adds __GFP_HARDWALL for the
fast path when cpusets are enabled, the __GFP_HARDWALL check in
cpuset_current_node_allowed() causes the PF_EXITING escape path to be
skipped on the first allocation attempt. This makes it unreachable in
the common case, so dying tasks can get stuck in direct reclaim or even
trigger OOM while trying to exit, despite being allowed to allocate from
any node.
Move the PF_EXITING check before __GFP_HARDWALL so that dying tasks
can allocate memory from any node to exit quickly, even when cpusets
are enabled.
Also update the function comment to reflect the actual behavior of
prepare_alloc_pages() and the corrected check ordering.
Signed-off-by: Chen Wandun <chenwandun@lixiang.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reconfiguring ASPM when a device transitions to low-power state can enable
L1.1/L1.2 substates on the PCIe link at a time when the device is sleeping
and may be unable to exit them. ASPM should be reconfigured on D0 entry
(resume), not on the way down.
pci_set_low_power_state() calls pcie_aspm_pm_state_change() after writing
D3hot to PCI_PM_CTRL. pcie_aspm_pm_state_change() resets link->aspm_capable
to link->aspm_support and then calls pcie_config_aspm_path(), which can
enable ASPM L1.1/L1.2 substates on the PCIe link. If the device cannot
recover the link from L1.2 while in D3hot, subsequent config space reads
return 0xFFFF ("device inaccessible") and pci_power_up() fails with
messages like:
vfio-pci 0000:5d:00.0: Unable to change power state from D3hot to D0, device inaccessible
This was observed on NVIDIA H100 SXM5 GPUs bound to vfio-pci when Linux
runtime PM suspends them to D3hot: the GPU becomes permanently inaccessible
and disappears from the PCIe bus.
The call to pcie_aspm_pm_state_change() in pci_set_low_power_state() was
restored by f93e71aea6 ("Revert "PCI/ASPM: Remove
pcie_aspm_pm_state_change()""), which reverted 08d0cc5f34 ("PCI/ASPM:
Remove pcie_aspm_pm_state_change()"). The revert was necessary because the
removal broke suspend/resume on certain platforms that required ASPM to be
reconfigured on D0 entry. However, the revert restored the call in both
pci_set_full_power_state() (D0 entry) and pci_set_low_power_state()
(low-power entry).
Only the D0-entry call is needed to fix the suspend/resume regression. The
low-power-entry call is harmful: reconfiguring ASPM immediately after
putting a device into D3hot can enable link substates that the device or
platform cannot exit while the device is sleeping.
Remove the pcie_aspm_pm_state_change() call from pci_set_low_power_state().
ASPM will still be reconfigured correctly when the device returns to D0 via
pci_set_full_power_state().
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260428040104.78524-1-carlos.bilbao@kernel.org
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same behavior.
The old wq (system_wq) will be kept for a few release cycles.
Cc: Marek Behun <kabel@kernel.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
NPU firmware requires a host-allocated work buffer for hardware contexts.
Allocate a 4 MB host buffer and attach it to device during device init.
Refactor aie2_alloc_msg_buffer() and aie2_free_msg_buffer() into common
helpers by moving them to aie.c and renaming them to
amdxdna_alloc_msg_buffer() and amdxdna_free_msg_buffer(), allowing both
AIE2 and AIE4 to reuse the implementation.
Signed-off-by: Nishad Saraf <nishads@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/all/20260505160936.3917732-7-lizhi.hou@amd.com/
Add support for querying device metadata on AIE4 via a mailbox message.
Refactor aie2_get_aie_metadata() into a common helper by moving it to
aie.c and renaming it to amdxdna_get_metadata(), allowing both AIE2
and AIE4 to reuse the implementation.
Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: David Zhang <yidong.zhang@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260506161642.141257-1-lizhi.hou@amd.com
Expose the command doorbell register to userspace on a per-hardware
context basis, enabling applications to notify the firmware of pending
commands via doorbell writes.
Introduce DRM_IOCTL_AMDXDNA_WAIT_CMD to allow userspace to wait for
completion of individual commands.
Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: David Zhang <yidong.zhang@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260505160936.3917732-5-lizhi.hou@amd.com
The firmware is told the buffer is req.buf_size bytes. It may read/write
the entire region. If the CPU only flushes a subset, the remaining cache
lines could contain stale data, causing the device to see garbage.
Fixes: 6e87001fe1 ("accel/amdxdna: Adjust size for copy_to_user()")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260507040207.178111-1-lizhi.hou@amd.com
scx_link_sched() holds scx_sched_lock. The scx_error() calls inside take the
same lock through scx_claim_exit() and deadlock. Move them out of the guard.
Fixes: 6b4576b097 ("sched_ext: Reject sub-sched attachment to a disabled parent")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add additional OPP entries for the Agatti platform to support higher
operating frequencies as specified in the hardware documentation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-iris-ar50lt-v1-16-d22cccedc3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points.
Fixes: bc3e9dd9d1 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory.
Link: https://lore.kernel.org/linux-cifs/d998240c-aca9-420d-9dbd-f5ba24af19e0@chenxiaosong.com/
Fixes: ea41367b2a ("smb: client: introduce SMB2_OP_QUERY_WSL_EA")
Cc: stable@vger.kernel.org
Signed-off-by: Zisen Ye <zisenye@stu.xidian.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read.
Link: https://lore.kernel.org/linux-cifs/297d8d9b-adf7-42fd-a1c2-5b1f230032bc@chenxiaosong.com/
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Cc: Stable@vger.kernel.org
Signed-off-by: Zisen Ye <zisenye@stu.xidian.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Per MS-SMB2 section 3.2.5.3, Session.SessionKey is the first 16 bytes
of the GSS cryptographic key, right-padded with zero bytes if the key
is shorter than 16 bytes.
SMB2_auth_kerberos() copies the GSS session key from the cifs.upcall
response using kmemdup(msg->data, msg->sesskey_len, ...) and stores
the GSS-reported length verbatim in ses->auth_key.len. generate_key()
reads SMB2_NTLMV2_SESSKEY_SIZE bytes from this buffer when feeding the
HMAC-SHA256 KDF for signing key derivation. If a GSS mechanism returns
a session key shorter than 16 bytes (e.g. a deprecated single-DES
Kerberos enctype with an 8-byte session key), the KDF call performs an
out-of-bounds slab read and derives keys that do not match the server,
which pads per the spec.
Modern KDCs disable short-key enctypes by default, so this is latent
rather than reachable in production, but it is still a kernel heap
over-read.
Allocate auth_key.response with kzalloc() at a length of
max(msg->sesskey_len, SMB2_NTLMV2_SESSKEY_SIZE), copy the GSS key in,
and rely on kzalloc()'s zero initialization for the spec-mandated
padding. Set ses->auth_key.len to the padded length. Larger GSS keys
(e.g. the 32-byte aes256-cts-hmac-sha1-96 session key) continue to be
stored at their natural length, preserving the FullSessionKey path.
Emit a cifs_dbg(VFS, ...) message when a short key is encountered to
surface deprecated-enctype usage.
NTLMv2 and NTLMSSP code paths produce a 16-byte session key by
construction and are unaffected.
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com>
Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When Kerberos authentication is used with AES-256 encryption (AES-256-CCM
or AES-256-GCM), the SMB3 encryption and decryption keys must be derived
using the full session key (Session.FullSessionKey) rather than just the
first 16 bytes (Session.SessionKey).
Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and
Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey
must be set to the full cryptographic key from the GSS authentication
context. The encryption and decryption key derivation (SMBC2SCipherKey,
SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The
signing key derivation continues to use Session.SessionKey (first 16
bytes) in all cases.
Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the
HMAC-SHA256 key input length for all derivations. When Kerberos with
AES-256 provides a 32-byte session key, the KDF for encryption/decryption
was using only the first 16 bytes, producing keys that did not match the
server's, causing mount failures with sec=krb5 and require_gcm_256=1.
Add a full_key_size parameter to generate_key() and pass the appropriate
size from generate_smb3signingkey():
- Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes)
- Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16
Also fix cifs_dump_full_key() to report the actual session key length for
AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools
like Wireshark receive the correct key for decryption.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com>
Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260410041901.2438960-1-ashutoshdesai993@gmail.com
The phys argument to dma_iova_try_alloc() is used only to compute
the sub-granule offset (phys & (granule - 1)). Since HPAGE_PMD_SIZE
is a power of two larger than any IOMMU granule, this expression
always evaluates to zero.
Replace the ternary expressions with a plain 0, which is what the
API documentation recommends for callers doing PAGE_SIZE-aligned
transfers. This also removes the dependency on HPAGE_PMD_SIZE and
thus on CONFIG_PGTABLE_HAS_HUGE_LEAVES / HAVE_ARCH_TRANSPARENT_HUGEPAGE,
fixing build failures on architectures such as arm32 that lack that
config.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Assisted-by: GitHub Copilot:claude-sonnet-4.6 # Documentation
Link: https://lore.kernel.org/intel-xe/c36e7dfb-cf62-4d21-a3b1-f54cb43e0832@infradead.org/
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260507091606.1067973-1-francois.dugast@intel.com
Fixes: 2e0cd372b8 ("drm/pagemap: Use dma-map IOVA alloc, link, and sync API for DRM pagemap")
Fixes: 37ad039fb3 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that
IPv6 itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi: cw1200: revert "Fix locking in error paths"
- wifi: ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix: fix an issue between garbage collection and PEEK
- af_unix: fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ogzY
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
Use the __free(kfree) macro for the obuf allocation in mxt_object_show()
to simplify the code.
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In mxt_update_cfg(), the driver calculates the memory size needed to store
the configuration as data->mem_size - cfg.start_ofs. If data->mem_size is
less than or equal to cfg.start_ofs, this calculation will underflow or
result in a zero-size buffer, neither of which is valid for a configuration
update.
Add a check to return -EINVAL if data->mem_size is too small. While at it,
change the types of start_ofs and mem_size in struct mxt_cfg to u16 to
match the device address space.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260504185448.4055973-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=.
Fixes: 50a77c658b ("Input: atmel_mxt_ts - download device config using firmware loader")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507160051.3315630-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
* Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
* ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
* HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
* USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
* Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest
-----BEGIN PGP SIGNATURE-----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=prTy
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Fixes
- hp-wmi: silence unknown board warning for 8D41
- lenovo/wmi-other: Fix uninitialized variable in fan RPM handling
- wmi: Check min_size also when ACPI does not return an out object
The following is an automated shortlog grouped by driver:
hp-wmi:
- silence unknown board warning for 8D41
lenovo: wmi-other:
- Fix uninitialized variable in lwmi_om_hwmon_write()
wmi:
- Fix unchecked min_size in wmidev_invoke_method()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCafx4pgAKCRBZrE9hU+XO
MerAAP9ALfDumabgsXGDibvB5700w4oXxKpf+NS/O0RGlKSpigD/bvo4xIut5Qow
xYZfEhYkRUyd0bSQwYh5i7fS8am7Nw8=
=Lais
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
The i.MX8M soc device is registered via platform_device_register_simple(),
so it is not associated with a Device Tree node and the imx8m_soc_driver
has no of_match_table.
As a result, device_get_match_data() always returns NULL when probing
the soc device.
Retrieve the match data directly from the machine compatible using
of_machine_get_match_data(imx8_soc_match), which provides the correct SoC
data.
Fixes: 2524b293a5 ("soc: imx8m: don't access of_root directly")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
