When _mlx5e_probe() fails, the preceding successful mlx5_sd_init() is
not undone. Auxiliary bus probe failure skips binding, so mlx5e_remove()
is never called for that adev and the matching mlx5_sd_cleanup() never
runs - leaking the per-dev SD struct.
Call mlx5_sd_cleanup() on the probe error path to balance
mlx5_sd_init().
A similar gap exists on the resume path: mlx5_sd_init() and
mlx5_sd_cleanup() are currently bundled with both probe/remove and
suspend/resume, even though only the FW alias state actually needs to
follow the suspend/resume lifecycle - the sd struct allocation and
devcom membership are software state that should track the full bound
lifetime. As a result, a failed resume can leave a still-bound device
with sd == NULL, which mlx5_sd_get_adev() can't distinguish from a
non-SD device. Fixing this requires sd_suspend/resume APIs which will
only destroy FW resources and is left for a follow-up series.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() creates the "multi-pf" debugfs directory under the
primary device debugfs root, but stored the dentry in the calling
device's sd struct. When sd_cleanup() run on a different PF,
this leads to using the wrong sd->dfs for removing entries, which
results in memory leak and an error in when re-creating the SD.[1]
Fix it by explicitly storing the debugfs dentry in the primary
device sd struct and use it for all per-group files.
[1]
debugfs: 'multi-pf' already exists in '0000:08:00.1'
Fixes: 4375130bf5 ("net/mlx5: SD, Add debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() / mlx5_sd_cleanup() may run from multiple PFs in the same
Socket-Direct group. This can cause the SD bring-up/tear-down sequence
to be executed more than once or interleaved across PFs.
Protect SD init/cleanup with mlx5_devcom_comp_lock() and track the SD
group state on the primary device. Skip init if the primary is already
UP, and skip cleanup unless the primary is UP.
The state check on cleanup is needed because sd_register() drops the
devcom comp lock between marking the comp ready and assigning
primary_dev on each peer. A concurrent cleanup that acquires the lock
in this window would observe devcom_is_ready==true while primary_dev
is still NULL (causing mlx5_sd_get_primary() to return NULL) or while
the FW alias setup performed by mlx5_sd_init()'s body has not yet run
(causing sd_cmd_unset_primary() to dereference a NULL tx_ft). Gate the
cleanup body on primary_sd->state == MLX5_SD_STATE_UP, which is set
only at the very end of mlx5_sd_init() under the same comp lock - so
observing UP guarantees primary_dev, secondaries[], tx_ft, and dfs are
all populated. Also bail explicitly if mlx5_sd_get_primary() returns
NULL, in case state is checked on a peer whose primary_dev hasn't been
assigned yet.
In addition, move mlx5_devcom_comp_set_ready(false) from sd_unregister()
into the cleanup's locked section, including the !primary and
state != UP early-exit paths, so the device cannot unregister and free
its struct mlx5_sd while devcom is still marked ready. A concurrent
init acquiring the devcom lock will now observe devcom is no longer
ready and bail out immediately.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_FIRMWARE_EDID=y depends on X86 or EFI_GENERIC_STUB. Neither is
true here, so drop the lines from the defconfig files.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260401083023.214426-1-tzimmermann@suse.de
devlink reload while PSP connections are active does:
mlx5_unload_one_devl_locked() -> mlx5_detach_device()
-> _mlx5e_suspend()
-> mlx5e_detach_netdev()
-> profile->cleanup_rx
-> profile->cleanup_tx
-> mlx5e_destroy_mdev_resources() -> mlx5_core_dealloc_pd() fails:
...
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:821:(pid 19722):
DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9),
syndrome (0xef0c8a), err(-22)
...
The reason for failure is the existence of TX keys, which are removed by
the PSP dev unregistration happening in:
profile->cleanup() -> mlx5e_psp_unregister() -> mlx5e_psp_cleanup()
-> psp_dev_unregister()
...but this isn't invoked in the devlink reload flow, only when changing
the NIC profile (e.g. when transitioning to switchdev mode) or on dev
teardown.
Move PSP device registration into mlx5e_nic_enable(), and unregistration
into the corresponding mlx5e_nic_disable(). These functions are called
during netdev attach/detach after RX & TX are set up.
This ensures that the keys will be gone by the time the PD is destroyed.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during PSP init, priv->psp is initialized to an incompletely
built psp struct. Additionally, on fs init failure priv->psp is reset to
NULL.
Change this so that only a fully initialized priv->psp is set, which
makes the code easier to reason about in failure scenarios.
Fixes: af2196f494 ("net/mlx5e: Implement PSP operations .assoc_add and .assoc_del")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->psp->psp is initialized with the PSP device as returned by
psp_dev_create(). This could also return an error, in which case a
future psp_dev_unregister() will result in unpleasantness.
Avoid that by using a local variable and only saving the PSP device when
registration succeeds.
In case psp_dev_create() fails, priv->psp and steering structs are left
in place, but they will be inert. The unchecked access of priv->psp in
mlx5e_psp_offload_handle_rx_skb() won't happen because without a PSP
device, there can be no SAs added and therefore no packets will be
successfully decrypted and be handed off to the SW handler.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core-book3s PMU sampling code validates the SIER TYPE field
when PERF_SAMPLE_DATA_SRC is requested. The SIER TYPE field
indicates the instruction type and is only valid for
random sampling (marked events). To handle cases observed where
SIER TYPE could be zero even for marked events,validation was
added to drop such samples and increment event->lost_samples.
However, this validation was applied to all samples,
including continuous sampling. In continuous sampling mode,
the PMU does not set the SIER TYPE field, so it remains zero.
As a result, valid continuous samples were incorrectly
treated as invalid and dropped. Fixed this by gating the
SIER TYPE validation with mark_event, so the check runs only
for marked (random) events. Continuous samples now skip this
check and are recorded normally in the final data recording path.
Fixes: 2ffb26afa6 ("arch/powerpc/perf: Check the instruction type before creating sample with perf_mem_data_src")
Signed-off-by: Shivani Nittor <shivani@linux.ibm.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com>
[Maddy: Fixed reviewed-by tag]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260421150628.96500-1-shivani@linux.ibm.com
Allthough fsl,cpm1-gpio-irq-mask always contains a 16 bits value,
it is a standard u32 OF property as documented in
Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
The driver erroneously uses of_property_read_u16() leading to a
mask which is always 0.
Fix it by using of_property_read_u32() instead.
Fixes: 726bd22310 ("powerpc/8xx: Adding support of IRQ in MPC8xx GPIO")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/bb0b6d6c4543238c38d5d29a776d0674a8c0c180.1776752750.git.chleroy@kernel.org
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path.
Fixes: da45d2566a ("net: wwan: t7xx: Add control port")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kexec sequence invokes enter_vmx_ops() via copy_page() with the MMU
disabled. In this context, code must not rely on normal virtual address
translations or trigger page faults.
With KASAN enabled, functions get instrumented and may access shadow
memory using regular address translation. When executed with the MMU
off, this can lead to page faults (bad_page_fault) from which the
kernel cannot recover in the kexec path, resulting in a hang.
The kexec path sets preempt_count to HARDIRQ_OFFSET before entering
the MMU-off copy sequence.
current_thread_info()->preempt_count = HARDIRQ_OFFSET
kexec_sequence(..., copy_with_mmu_off = 1)
-> kexec_copy_flush(image)
copy_segments()
-> copy_page(dest, addr)
bl enter_vmx_ops()
if (in_interrupt())
return 0
beq .Lnonvmx_copy
Since kexec sets preempt_count to HARDIRQ_OFFSET, in_interrupt()
evaluates to true and enter_vmx_ops() returns early.
As in_interrupt() (and preempt_count()) are always inlined, mark
enter_vmx_ops() with __no_sanitize_address to avoid KASAN
instrumentation and shadow memory access with MMU disabled, helping
kexec boot fine with KASAN enabled.
Reported-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260407124349.1698552-2-sourabhjain@linux.ibm.com
KASAN instrumentation is intended to be disabled for the kexec core
code, but the existing Makefile entry misses the object suffix. As a
result, the flag is not applied correctly to core_$(BITS).o.
So when KASAN is enabled, kexec_copy_flush and copy_segments in
kexec/core_64.c are instrumented, which can result in accesses to
shadow memory via normal address translation paths. Since these run
with the MMU disabled, such accesses may trigger page faults
(bad_page_fault) that cannot be handled in the kdump path, ultimately
causing a hang and preventing the kdump kernel from booting. The same
is true for kexec as well, since the same functions are used there.
Update the entry to include the “.o” suffix so that KASAN
instrumentation is properly disabled for this object file.
Fixes: 2ab2d5794f ("powerpc/kasan: Disable address sanitization in kexec paths")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/1dee8891-8bcc-46b4-93f3-fc3a774abd5b@linux.ibm.com/
Cc: stable@vger.kernel.org
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260407124349.1698552-1-sourabhjain@linux.ibm.com
Simplify hvpipe_rtas_recv_msg() by removing three levels of nesting...
if (!ret)
if (buf)
if (size < bytes_written)
... this refactoring of the function bails out to "out:" label first, in case
of any error. This simplifies the init flow.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/bbe7ddf8b8e25c9be8fc5e2c4aea9e5fca128bf4.1777606826.git.ritesh.list@gmail.com
copy_to_user() return bytes_not_copied to the user buffer. If there was
an error writing bytes into the user buffer, i.e. if copy_to_user
returns a non-zero value, then we should simply return -EFAULT from the
->read() call.
Otherwise, in the non-patched version, we may end up mixing
"bytes_not_copied + bytes_copied (HVPIPE_HDR_LEN)" as the return value
to the user in ->read() call
Also let's make sure we clear the hvpipe_status flag, if we have
consumed the hvpipe msg by making the rtas call. ret = -EFAULT means
copy_to_user has failed but that still means that the msg was read from
the hvpipe, hence for both cases, success & -EFAULT, we should clear the
HVPIPE_MSG_AVAILABLE flag in hvpipe_status.
Cc: stable@vger.kernel.org
Fixes: cebdb522fd ("powerpc/pseries: Receive payload with ibm,receive-hvpipe-msg RTAS")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8fda3212a1ad48879c174e92f67472d9b9f1c3b7.1777606826.git.ritesh.list@gmail.com
Remove such 3 levels of nesting patterns to check success return values
from function calls.
ret = enable_hvpipe_IRQ()
if (!ret)
ret = set_hvpipe_sys_param(1)
if (!ret)
ret = misc_register()
Instead just bail out to "out*:" labels, in case of any error. This
simplifies the init flow.
While at it let's also fix the following error handling logic:
We have already enabled interrupt sources and enabled hvpipe to received
interrupts, if misc_register() fails, we will destroy the workqueue, but
the HMC might send us a msg via hvpipe which will call, queue work on
the workqueue which might be destroyed.
So instead, let's reverse the order of enabling set_hvpipe_sys_param(1)
and in case of an error let's remove the misc dev by calling
misc_deregister().
Cc: stable@vger.kernel.org
Fixes: 39a08a4f94 ("powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/f2141eafb80e7780395e03aa9a22e8a37be80513.1777606826.git.ritesh.list@gmail.com
commit 6d3789d347 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"),
changed the create handle to FD_PREPARE(), but it caused kernel
null-ptr-deref because after call to retain_and_null_ptr(src_info),
src_info is re-used for adding it to the global list.
Getting the following kernel panic in papr_hvpipe_dev_create_handle()
when trying to add src_info to the list.
Kernel attempted to write user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x00000000
Faulting instruction address: 0xc0000000001b44a0
Oops: Kernel access of bad area, sig: 11 [#1]
...
Call Trace:
papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable)
sys_ioctl+0x528/0x1064
system_call_exception+0x128/0x360
system_call_vectored_common+0x15c/0x2ec
Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto
cleanup is getting too convoluted. This is mainly because we need to
ensure only 1 user get the srcID handle. To simplify this, we allocate
prepare the src_info in the beginning and add it to the global list
under a spinlock after checking that no duplicates exist.
This simplify the error handling where if the FD_ADD fails, we can
simply remove the src_info from the list and consume any pending msg in
hvpipe to be cleared, after src_info became visible in the global list.
Cc: stable@vger.kernel.org
Fixes: 6d3789d347 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()")
Reported-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/31ad94bc89d44156ee700c5bd006cb47a748e3cb.1777606826.git.ritesh.list@gmail.com
The hdr variable is allocated on the stack and only hdr.version and
hdr.flags are initialized explicitly. Because the struct papr_hvpipe_hdr
contains reserved padding bytes (reserved[3] and reserved2[40]), these
could leak the uninitialized bytes to userspace after copy_to_user().
This patch fixes that by initializing the whole struct to 0.
Cc: stable@vger.kernel.org
Fixes: cebdb522fd ("powerpc/pseries: Receive payload with ibm,receive-hvpipe-msg RTAS")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7bfe03b65a282c856ed8182d1871bb973c0b78f2.1777606826.git.ritesh.list@gmail.com
While executing ->ioctl handler or ->release handler, if an interrupt
fires on the same cpu, then we can enter into a deadlock.
This patch fixes both these handlers to take spin_lock_irq{save|restore}
versions of the lock to prevent this deadlock.
Cc: stable@vger.kernel.org
Fixes: 814ef095f1 ("powerpc/pseries: Add papr-hvpipe char driver for HVPIPE interfaces")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e4ed435c44fc191f2eb23c7907ba6f72f193e6aa.1777606826.git.ritesh.list@gmail.com
H_HTM (Hardware Trace Macro) hypervisor call has capability
to capture SystemMemory Configuration. This information
helps to understand the address mapping for the partitions
in the system.
Support dumping system memory configuration from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htmsystem_mem".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall. The 16th offset of HTM
buffer has value for the number of entries for array of processors.
Use this information to copy data to the debugfs file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260314132953.27269-1-atrajeev@linux.ibm.com
H_HTM call is invoked using three parameters specifying
the address of the buffer, size of the buffer and offset
where to read from. offset used was always zero.
"offset" is value from output buffer header that points
to next entry to dump. zero is the first entry to dump.
next entry is read from the output bufferbyte offset 0x8.
Update htmstatus_read() function to use right offset. Return
when offset points to -1
Fixes: 627cf584f4 ("powerpc/pseries/htmdump: Add htm status support to htmdump module")
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260314132432.25581-3-atrajeev@linux.ibm.com
H_HTM call is invoked using three parameters specifying
the address of the buffer, size of the buffer and offset
where to read from. offset used was always zero.
"offset" is value from output buffer header that points
to next entry to dump. zero is the first entry to dump.
next entry is read from the output bufferbyte offset 0x8.
Update htminfo_read() function to use right offset. Return
when offset points to -1
Fixes: dea7384e14 ("powerpc/pseries/htmdump: Add htm info support to htmdump module")
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260314132432.25581-2-atrajeev@linux.ibm.com
htmdump modules uses global memory buffers to capture
details like capabilities, status of specified HTM, read the
trace buffer. These are initialized during module init and
hence needs to be freed in module exit.
Patch adds freeing of the memory in module exit. The change
also includes minor clean up for the variable name. The
read call back for the debugfs interface file saves filp->private_data
to local variable name which is same as global variable
name for the memory buffers. Rename these local variable
names.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260314132432.25581-1-atrajeev@linux.ibm.com
DTS patches were always expected to be either sent separately or put at
the end of patchset, but the first part rule explaining it used a
"should be placed at the end of patchset" phrase which might create
wrong impression. This part "should be" was about order of the patches
and applied only to the case when DTS is combined into this patchset.
Suggested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428150420.121472-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for the 6320 family. Do it now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9e907d739c ("net: dsa: mv88e6xxx: add POT operation") did not
add the .pot_clear() method to the 6321 switch operations structure.
Add them now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-4-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6320 family supports the ALT_SPEED bit on ports 2, 5 and 6. Allow
this speed by implementing 6320 family specific .port_set_speed_duplex()
method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
selftests: drv-net: convert so_txtime to drv-net
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Two preparatory patches
1. support negative tests, where tests are expected to fail
2. add a tc helper
See individual patches for details and detailed changelog
====================
Link: https://patch.msgid.link/20260504174056.565319-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Also update so_txtime.c to not exit on first failure, but run to
completion and report exit code there. This helps with debugging
unexpected results, especially when processing multiple packets,
as happens in the "reverse_order" testcase.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
v6 -> v7
- update test to use new argument expect_fail
- v6 received Reviewed-by, but dropped due to above (minor) change
v5 -> v6
- fix order in tools/testing/selftests/drivers/net/config
v4 -> v5
- move qdisc setup/restore into each test
- add tc to utils.py (separate patch)
- test expected failure (separate patch)
- fix pylint
- convert fail to pass for timing errors if KSFT_MACHINE_SLOW
(cmd does not special case KSFT_SKIP process returncode yet)
Responses to sashiko review
- The test converts per packet failure to errors, to continue
testing other packets, but other error() cases are not in scope.
- The test starts sender and receiver at an absolute future time,
like the original test. This assumes ~msec scale sync'ed clocks.
- The tc qdisc replace command works fine with noqueue. Tested
manually.
v3 -> v4
- restore original qdisc after test
- drop unnecessary underscore in tap test names
v2 -> v3
- Makefile: so_txtime from YNL_GEN_FILES to TEST_GEN_FILES (Sashiko, NIPA)
v1 -> v2
- move so_txtime.c for net/lib to drivers/net (Jakub)
- fix drivers/net/config order (Jakub)
- detect passing when failure is expected (Jakub, Sashiko)
- pass pylint --disable=R (Jakub)
- only call ksft_run once (Jakub)
- do not sleep if waiting time is negative (Sashiko)
- add \n when converting error() to fprintf() (Sashiko)
- 4 space indentation, instead of 2 space
- increase sync delay from 100 to 200ms, to fix rare vng flakes
Link: https://patch.msgid.link/20260504174056.565319-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a wrapper similar to existing ip, ethtool, ... commands.
Tc takes a slightly different syntax. Account for that.
The first user is the next patch in this series, converting so_txtime
to drv-net. Pacing offload is supported by selected qdiscs only.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support negative tests, where cmd raises an exception if the command
succeeded.
Add optional argument expect_fail to cmd and bkg. Where fail fails the
test on unexpected error, expect_fail fails it on unexpected success.
Both fail on negative return code. Python subprocess may set a
negative return code on process crash or timeout. Those are never
anticipated failures.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pxa2xx sound library modules are only used by the ASoC driver since
commit b094de7810 ("ASoC: codec: Remove pxa2xx-ac97.c"), so move the
code into the one module that uses as a simpliciation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no remaining static platform_device users of pxa2xx ac97,
so the rest of that code path can go away as well.
Since nothing in the driver uses the gpio number now, constrain the use
of the legacy gpio interface to the architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Nothing ever sets pxa2xx_audio_ops_t since the last users were removed
in ce79f3a1ad ("ARM: pxa: prune unused device support") , so stop
passing it around through the sound, ac97 code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
4751bddd3f ("perf tools: Make GTK2 support opt-in") changed GTK2
build to be opt-in.
So NO_GTK2 is meaningless and we need to pass GTK2=1 to enable it.
Let's update the build-test configuration for that.
Also make_no_ui is the same as make_no_slang since NO_GTK2 is no-op.
Let's get rid of it as well.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On my system, `make GEN_VMLINUX_H=1` fails with a lot of error messages
like below:
./util/bpf_skel/vmlinux.h:134488:4: error: declaration does not declare anything [-Werror,-Wmissing-declarations]
134488 | struct freelist_counters;
| ^~~~~~~~~~~~~~~~~~~~~~~~
make[2]: *** [Makefile.perf:1249: linux/tools/perf/util/bpf_skel/.tmp/lock_contention.bpf.o] Error 1
I saw commit 835a507535 ("selftests/bpf: Add -fms-extensions to bpf
build flags") also added the same flags to bpf programs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should say binutils-dev(el) instead of plain binutils package as it's
mostly installed already and can confuse people like me. :)
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the convenience macro PCI_DEVICE to initialize .vendor, .device,
.subvendor and .subdevice. Drop explicit zeros that the compiler also
fills in.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260504151202.2139919-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .port_max_speed_mode() method is not used anymore since commit
40da0c32c3 ("net: dsa: mv88e6xxx: remove handling for DSA and CPU ports").
Drop it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260504152653.1389394-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Any IMPDEF events not printed out from a known core's IMPDEF list or for
a completely unknown core will still not be shown to the user. Fix this
by printing the remaining bits as comma separated raw numbers, e.g.
"IMPDEF:1,2,3,4".
Suggested-by: Al Grant <al.grant@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>From the TRM [1], N1 has one IMPDEF event which isn't covered by the
common list. Add a framework so that more cores can be added in the
future and that the N1 IMPDEF event can be decoded. Also increase the
size of the buffer because we're adding more strings and if it gets
truncated it falls back to a hex dump only.
[1]: https://developer.arm.com/documentation/100616/0401/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
Suggested-by: Al Grant <al.grant@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://developer.arm.com/documentation/100616/0401/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is so we can have a single function that prints events and can be
used with multiple mappings from different CPUs. Remove any bit that was
printed so that later we can print out the remaining unknown impdef
bits.
No functional changes intended.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
