Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430120200.249323-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-20-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-18-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-17-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-16-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-15-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-14-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-13-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-12-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-11-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-10-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-9-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-8-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-7-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20260429091333.165363-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation to simplify error
handling and to avoid having to take another reference during
deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429091333.165363-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
phucduc.bui@gmail.com <phucduc.bui@gmail.com> says:
This series converts spin lock handling in UniPhier AIO drivers
to use guard() helpers.
The changes are purely code cleanups with no functional impact.
Some controllers are 'smart', and that's a problem.
For instance, the Cadence quadspi controller is capable of deasserting
the CS automatically whenever a too long period of time without any data
to transfer elapses.
This 'feature' combined with a loaded interconnect with arbitration, a
"long" transfer may be split into smaller DMA transfers. In this case
the controller may allow itself to deassert the CS between chunks.
Deasserting the CS stops any ongoing continuous read. Reasserting it
later to continue the reading will only result in the host getting
garbage.
In this case, the host controller driver has no control over the CS
state, so we cannot reliably enable continuous reads. Flag this
limitation through a spi-mem controller capability.
The inversion in the flag name (starting with 'no_') is voluntary, in
order to avoid the need to set this flag in all controller drivers. Only
the broken controllers shall set this bit, the default being that the
controller masters its CS fully.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Treat the companion amp as generic AMP until full support for companion
amp is added.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260430121043.552241-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the incorrect use of onchip_spkid_gpios[i] in the dev_err() after
regmap_read() of CS35L56_GPIO_STATUS1 returns an error.
This dev_err() was incorrectly copy-pasted from one inside the for-loop,
where i was valid. The read of CS35L56_GPIO_STATUS1 isn't for a specific
GPIO register, so the use of onchip_spkid_gpios[i] in the error message is
both irrelevant and out-of-bounds here.
Fixes: 4d1e3e2c40 ("ASoC: cs35l56: Support for reading speaker ID from on-chip GPIOs")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430101134.2655938-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the dead runtime PM support which has never been enabled.
Fixes: 96ed3ecde2 ("spi: at91-usart: add power management support")
Cc: Radu Pirea <radu_nicolae.pirea@upb.ro>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260429092005.166128-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The error path of cs35l56_runtime_resume_common() should only write
the hibernation sequence if can_hibernate is true.
Something has already gone badly wrong if we ever reach the error
path. But triggering hibernate on hardware that does not support it
is likely to make the situation unrecoverable without a full reboot
because there might not be any hardware signal to exit hibernate.
Fixes: a47cf4dac7 ("ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260429105315.2438298-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When TX is already running (SSCR_SSE is set), the hw_params callback
returns early before setting up DMA parameters for the RX stream. This
prevents the capture path from configuring its DMA data properly.
Move the SSCR_SSE check after DMA parameter setup and format
constraints, so both TX and RX streams get their DMA configuration
regardless of whether the hardware is already enabled. The early return
now only skips the register writes that would disrupt an active stream.
Fixes: fce2174490 ("ASoC: spacemit: add i2s support for K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k1-i2s-fix-v2-1-8d67835aaddc@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
GFP_NOWAIT is inappropriate when blkdev_issue_zeroout may sleep and
bio_alloc can fail under pressure; use GFP_NOIO for clear_partition and
vdo_clear_layout zeroout calls.
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fc1d438267 ("dm vdo: save the formatted metadata to disk")
In some situations, direct mappings may need to use different
operation templates.
For instance, when enabling continuous reads, Winbond SPI NANDs no
longer expect address cycles because they would be ignoring them
otherwise. Hence, right after the command opcode, they start counting
dummy cycles, followed by the data cycles as usual.
This breaks the assumptions of "reads from cache" always being done
identically once the best variant has been picked up, across the
lifetime of the system.
In order to support this feature, we must give direct mapping more than
a single operation template to use, in order to switch to using
secondary operations upon request by the upper layer.
Create the concept of optional secondary operation template, which may
or may not be fulfilled by the SPI NAND and SPI NOR cores. If the
underlying SPI controller does not leverage any kind of direct mapping
acceleration, the feature has no impact and can be freely
used. Otherwise, the controller driver needs to opt-in for using this
feature, if supported.
The condition checked to know whether a secondary operation has been
provided or not is to look for a non zero opcode to limit the creation
of extra variables. In practice, the opcode 0x00 exist, but is not
related to any cache related operation.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
As of now, we only use a single operation template when creating SPI
memory direct mappings. With the idea to extend this possibility to 2,
rename the template to reflect that we are currently setting the
"primary" operation, and create a pointer in the same structure to point
to it.
From a user point of view, the op_tmpl name remains but becomes a
pointer, leading to minor changes in both the SPI NAND and SPI NOR
cores.
There is no functional change.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Direct mappings are very static concepts, which allow us to reuse a
template to perform reads or writes in a very efficient manner after a
single initialization. With the introduction of pipelined ECC engines
for SPI controllers, the need to differentiate between an operation with
and without correction has arised. The chosen solution at that time has
been to create new direct mappings for these operations, jumping from 2
to 4 dirmaps per target. Enabling ECC was done by choosing the correct
dirmap.
Today, we need to further parametrize dirmaps. With the goal to enable
continuous reads on a wider range of devices, we will need more
flexibility regarding the read from cache operation template to pick at
run time, for instance to use shorter "continuous read from cache"
variants.
We could create other direct mappings, but it would increase the matrix
by a power of two, bringing the theoretical number of dirmaps to
8 (read/write, ecc, shorter read variants) per target. This grow is not
sustainable, so let's change how dirmaps work - a little bit.
Operations already carry an ECC parameter, use it to indicate whether
error correction is required or not. In practice this change happens
only at the core level, SPI controller drivers do not care about the
direct mapping structure in this case, they just pick whatever is in the
template as a base. As a result, we allow the core to dynamically change
the content of the templates.
He who can do more can do less, so during the checking steps, make sure
to enable the ECC requirement just for the time of the checks.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since continuous reads may sometimes not be able to go past an erase
block boundary, it has been decided not to attempt longer reads and if
the user request is bigger, it will be split across eraseblocks.
As these request will anyway be handled correctly, there is no reason to
filter out cases where we would go over a target or a die, so drop this
limitation which had a side effect: any request to read more than the
content of an eraseblock would simply not benefit from the continuous
read feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Consolidate the allocations for capture_dma_data and playback_dma_data
into a single kzalloc by using a flexible array member at the end of
the tegra_admaif struct. This reduces the number of allocations from
three to one, simplifies error handling, and improves memory locality.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260503003037.11942-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the damage area resulting from a dirty memory range spans a single
scanline, the width of the rectangle is calculated dynamically because it
may not coincide with the framebuffer width.
If the dirty range ends exactly at the end of the scanline, the `bit_end`
variable is incorrectly assigned a 0 value, which results in a bogus clip
rectangle where the x2 coordinate is 0. This prevents the dirty scanline
from being flushed to the hardware.
Change the calculation of the `bit_end` value to fix the x2 coordinate
value in the above edge case.
Fixes: ded74cafee ("drm/fb-helper: Clip damage area horizontally")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260210173545.733937-1-flavra@baylibre.com
drm_kms_helper_poll_init() initializes the output polling work and
enables polling for the DRM device. qxl enables polling before calling
drm_dev_register(), but the drm_dev_register() failure path tears down
the modeset and device state without disabling the polling helper.
The remove path also unregisters and shuts down the DRM device without
first disabling the polling helper. Add matching drm_kms_helper_poll_fini()
calls in both paths so the delayed polling work is cancelled before qxl
tears down the associated modeset/device state.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ff91e4426 ("qxl: use drm helper hotplug support")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424112543.57819-1-mhun512@gmail.com
It is possible that the dm_ima_measure_on_* functions run at the same
time as a table is getting swapped, but before the md->ima.active_table
is updated by dm_ima_measure_on_device_resume(). Instead of using the
current device size, use the size of the active table that is being
measured (assuming there is one), so the information is consistent.
Also, don't allocate a separate string to hold the capactiy. Just
print it directly to the measurement buffer.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In all the dm_ima_measure_on_* functions besides
dm_ima_measure_on_table_load(), even if measuring the event fails, it's
still possible to update dm->ima, so that it continues to correctly
track the device state. This means that one measurement failure won't
cause future measurements to record the wrong data.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
a device rename could happen after do_resume() removed the inactive
table that it was swapping to out of the hash cell, but before it was
made the active table. In this case, the table metadata would still
have the old name. Update the swapped table's metadata to avoid this.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_ima_measure_on_device_rename() can be called on a device before it
ever loads a table, so it needs to handle the case where there is no
table metadata. Also, it was only updating the table_metadata on the
active table. If there was an inactive table when the device was renamed
and that table was later swapped in as the active table, it would
still have the old name. dm_ima_measure_on_device_rename() was also
needlessly allocating new memory for the updated table metadata, instead
of just reusing the existing memory.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Now that two processes can't modify md->ima in
dm_ima_measure_on_device_clear() at the same time, there's no need to
track if an inactive table was actually removed. We might as well
clean it up unconditionally, on the off chance that a previous
ima measurement failed and left md->ima.inactive_table behind.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
anc_configure() passed values from drvdata->anc_fir_values[],
drvdata->anc_iir_values[] and drvdata->sid_fir_values[] as register
offset to snd_soc_component_read(). The content of these arrays are user
controllable via the component controls "ANC FIR Coefficients", "ANC
IIR Coefficients" and "Sidetone FIR Coefficients" which I assume are
supposed to hold register values, not register offsets.
Without a datasheet for that component and given that before commit
a201aef1a8 ("ASoC: codecs: ab8500: Fix casting of private data") the
arrays overlapped with driver control structures and thus didn't work
properly since 2012, drop that functionality and let someone repair it
who has an actual need for it.
With the core functionally removed several code parts become essentially
unused and are removed, too.
Reported-by: Sashiko (gemini/gemini-3.1-pro-preview)
Link: https://sashiko.dev/#/patchset/20260428192255.2294705-2-u.kleine-koenig%40baylibre.com
Fixes: 679d7abdc7 ("ASoC: codecs: Add AB8500 codec-driver")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260430154524.338912-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the dm-ima code did not keep the dm_ima_measure_on_* functions from
running at the same time. This could lead to various errors. If two
processes were updating the device state, one could update the state
first, but the other could measure the state first, causing the the
current device state to appear incorrect. If a table load happened while
a device was resuming, the IMA measurement could report the wrong table
being active. And if two dm_ima_measure_on_* functions ran at the same
time, one of them could free data that the other was accessing, causing
a crash.
All the core dm functions that call a dm_ima_measure_on_* function
update the device state they want to measure under the _hash_lock,
except for do_resume(). But holding the _hash_lock is not a good way to
synchronize these functions. It's a global mutex, that is needed in many
dm operations, and the dm_ima_measure_* functions can sleep, blocking
any dm operation on any device that needs the _hash_lock.
To serialize and order the IMA measurement functions, the
dm_ima_measurements now has two counters, update_idx and measure_idx.
update_idx is incremented while holding the _hash_lock and saved, along
with the device name and uuid, in a dm_ima_context struct. Once the
_hash_lock is dropped, the dm_ima_measure_* function is called. It waits
until measure_idx matches the saved value of update_idx, ensuring that
the updates and measurements happen in the same order if there are
multiple processes changing the device at the same time. Then it
measures the device, updates measure_idx, and wakes up any other
process waiting to do a measurement. This makes sure that the
measurements are serialized and done in the order that the _hash_lock
was acquired in. But they only block other measurements for the same
device, which are unlikely to happen at the same time.
do_resume() is trickier, because it removes the inactive table while
holding the _hash_lock, but doesn't hold it while updating md->map. To
make sure it is also ordered, the IMA code grabs the _hash_lock after
md->map is updated. Then it makes sure that the device isn't being
removed and that another do_resume() hasn't already changed the active
table again, and serializes like the other functions do.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If an inactive table was cleared, dm_ima_measure_on_table_clear() was
copying the ima.active_table to ima.inactive_table. This is not what
device-mapper does, and it makes the IMA measurements show an inactive
table when there isn't one. Also, once this is removed, the code no
longer needs to keep checking if the active and the inactive table point
to the same memory.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
There is no status flag that is is used for STATUSTYPE_IMA type
status() calls, and STATUSTYPE_IMA itself is not a valid
status flag.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
