When it ran out of space for adding more targets to the ima_buf,
dm_ima_measure_on_table_load() would measure the dm device early, and
then add the rest of the targets and measure it again.
last_target_measured was intended to flag the last target measured so
that the device wouldn't get remeasured, if no new targets were added
after the early measurement. But the way to code works, the dm device
will never be measured early unless there is another target to add to
the ima_buf. Instead, if there is only one more target to add, that
target was getting added to the ima_buf, but it wasn't getting
remeasured, because last_target_measured was set. Since
dm_ima_measure_on_table_load() only measures a device early when there
are more targets to add, the final measurement must always happen, and
last_target_measured is unneeded.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
There's no point in saving the string length of DM_IMA_VERSION_STR. It's
a constant, so the compiler will precompute it. dm_create() will already
zero out the rest of dm->ima.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
returning DM_MAPIO_REQUEUE from the target map() function only requeues
the bio during noflush suspends. During regular operations or during
flushing suspends, it fails the bio. Failing the bio during flushing
suspends is the correct behavior here. We cannot handle the bio, and we
cannot suspends while it is outstanding. But during normal operations,
we should not push the bio back to dm. Instead, wait for the reshape
to be resumed.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Set PM ops for the vesadrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-6-tzimmermann@suse.de
Set PM ops for the simpledrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-5-tzimmermann@suse.de
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
Set PM ops for the efidrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-3-tzimmermann@suse.de
Set PM ops for the corebootdrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-2-tzimmermann@suse.de
Fix a typo in the documentation for struct drm_crtc_crc
("occured." -> "occurred").
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424183630.3764-1-eduardo@eduardovasconcelos.com
Fold the '+' check in the single-underscore-prefixed version
_kstrtoull() and remove the function. The arch/x86/boot/ namespace
prefixes everything copied from kernel proper with "boot_" so that
namespace clashes can be avoided.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Replace simple_strtoull() with boot_kstrtoul() for parsing the hugepages= boot
parameter.
Unlike simple_strtoull(), boot_kstrtoul() performs strict validation and
returns an error on invalid inputs instead of silently accepting partial
input. Use boot_kstrtoul() to reject and warn about invalid hugepages= values.
boot_kstrtoul() also converts the input directly to an unsigned long and
avoids implicit casting as max_gb_huge_pages *is* an unsigned long.
[ bp: Massage commit message. ]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260409161600.152012-2-thorsten.blum@linux.dev
Add support for the SMUX2_DSI0_CLK and SMUX2_DSI1_CLK clock muxes
present on the r9a09g047 SoC.
These muxes select between CDIV7_DSI{0,1}_CLK and CSDIV_2to16_PLLDSI{0,1}
using the CPG_SSEL3 register (SELCTL0 and SELCTL1 bits).
According to the hardware manual, when LVDS0 or LVDS1 outputs are used,
SELCTL0 or SELCTL1 must be set accordingly.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/9595f56ce8ab120477bfc11eaafb0f2b655d049a.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CLK_PLLDSI0_CSDIV and CLK_PLLDSI1_CSDIV fixed-factor clocks to
the r9a09g047 SoC clock driver.
These clocks are required to enable DSI and RGB output support.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/4d5b4ddad89770447b3818381d5353f5065b72b5.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CLK_PLLDSI0_DIV7 and CLK_PLLDSI1_DIV7 fixed-factor clocks to
the r9a09g047 SoC clock driver.
These clocks are required to enable LVDS0 and LVDS1 output support.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/e50c1721e1dc160e8b4518e8c5172f10cba4b58b.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the PLLDSI{0,1} clocks in the r9a09g047 CPG driver.
Introduce CLK_PLLDSI{0,1} also, introduce the
rzg3e_cpg_pll_dsi{0,1}_limits structures to describe the frequency
constraints specific to the RZ/G3E SoC.
On Renesas RZ/G3E:
- PLLDSI0 maximum output frequency: 1218 MHz
- PLLDSI1 maximum output frequency: 609 MHz
These limits are enforced through the newly added
RZG3E_CPG_PLL_DSI{0,1}_LIMITS().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/d26ec5349b0eb7ddb7d244fc53d1111a8530328f.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add PLLDSI clk mux support to select PLLDSI clock from different clock
sources.
Introduce the DEF_PLLDSI_SMUX() macro to define these muxes and register
them in the clock driver.
Extend the determine_rate callback to calculate and propagate PLL
parameters via rzv2h_get_pll_dtable_pars() when LVDS output is selected,
using a new helper function rzv2h_cpg_plldsi_smux_lvds_determine_rate().
The CLK_SMUX2_DSI{0,1}_CLK clock multiplexers select between two paths
with different duty cycles:
- CDIV7_DSIx_CLK (LVDS path, parent index 0): asymmetric H/L=4/3 duty (4/7)
- CSDIV_DSIx (DSI/RGB path, parent index 1): symmetric 50% duty (1/2)
Implement rzv2h_cpg_plldsi_smux_{get,set}_duty_cycle clock operations to
allow the DRM driver to query and configure the appropriate clock path
based on the required output duty cycle.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/24d3853ca2522df21e6a071a23e23ba4ca4b7276.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace vmwgfx's vblank timer with DRM's common implementation. The
timer handling is almost identical with a few additional bug fixes in
the common code.
Replace most of vmwgfx's vmw_vkms_get_vblank_timestamp() with the
shared helper drm_crtc_vblank_get_vblank_timeout(). The common helper
also works in the presence of delayed vblank timeouts that modify the
vblank counter concurrently.
Set the timeout handler to vmw_vkms_handle_vblank_timeout(). In addition
to handling vblank events, this function also controls CRC generation.
Remove all the hrtimer-related code from vmwgfx. DRM vblank timers
provides this.
v2:
- only cancel vblank timer in CRTC cleanup if vkms_enabled (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-4-tzimmermann@suse.de
Decouple vblank handling from the underlying hrtimer. This will be
helpful for replacing vmwgfx's vblank timer with DRM's common
implementation.
The new helper vmw_vkms_handle_vblank_timeout() can later be used as
callback for DRM's handle_vblank call as-is. The helper also keeps the
current semantics for restarting the timer. It returns true to restart
the next vblank timeout even if it could not acquire vmwgfx's vblank
lock.
The remaining code in vmw_vkms_vblank_simulate() will be replaced by
the DRM implementation in a later patch.
v2:
- clarify return-value semantics in commit message (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-3-tzimmermann@suse.de
Use the calculated duration of a frame as stored in the vblank state
for the lock-waiting timeout. Decouples the waiting from the details
of the vblank implementation. Both values should be equal.
This will be helpful for replacing vmwgfx's vblank timer with DRM's
common implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-2-tzimmermann@suse.de
gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(),
accesses the superblock object sdp through qd->qd_sbd after freeing qd.
It does so to decrement sd_quota_count and wake up sd_kill_wait.
However, by the time the RCU callback runs, gfs2_put_super() may have
already freed sdp via free_sbd(). This can happen when
gfs2_quota_cleanup() is called during unmount: it disposes of quota
objects via call_rcu() and then waits on sd_kill_wait with a 60-second
timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers
additional qd_put() calls that schedule more RCU callbacks after the
wait completes, gfs2_put_super() will proceed to free the superblock
while RCU callbacks referencing it are still pending.
Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure
all pending RCU callbacks (including gfs2_qd_dealloc) have completed
before the superblock is freed.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+42a37bf8045847d8f9d2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42a37bf8045847d8f9d2
Tested-by: syzbot+42a37bf8045847d8f9d2@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Move the conversion from drm_format to vs_format to atomic_check, which
is before the point of no return and can properly bail out.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-5-zhengxingda@iscas.ac.cn
The `drm_atomic_helper_check_plane_state()` helper function needs to be
called even if the plane is bound to no CRTCs.
Remove the early return in the primary plane's atomic_check, and use
NULL for crtc_state in this situation.
Fixes: dbf21777ca ("drm: verisilicon: add a driver for Verisilicon display controllers")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-4-zhengxingda@iscas.ac.cn
Create a subclass of drm_plane_state to store hardware-specific state
information (e.g. hardware plane format settings) in the future.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-3-zhengxingda@iscas.ac.cn
This is for further proper invalid drm_format handling before committing
the plane state change.
The return value is not yet checked yet, and will be checked in
atomic_check in the future.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-2-zhengxingda@iscas.ac.cn
Add a new driver for loading binary firmware to configuration
RAM using "SPI passive mode" on Efinix FPGAs.
Efinix passive SPI configuration requires chip select to remain asserted
from reset until the complete bitstream and trailing idle clocks have
been transferred, so the driver keeps CS active with cs_change and locks
the SPI bus for the duration of configuration.
Signed-off-by: Ian Dannapel <iansdannapel@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260416144237.373852-4-iansdannapel@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Use the return value of scnprintf() to keep track of the current string
length and also replace strlcat() with scnprintf(). Return the string
length directly instead of calling strlen(buf).
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260503101102.298782-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ts73xx-fpga driver currently only matches by platform device name,
which prevents it from being probed when the device is described in a
device tree. Add an of_device_id table so the driver can match against
the "technologic,ts7300-fpga" compatible string.
The TS-7350 and TS-7390 use different FPGAs with a different programming
interface, so while the driver is named "ts73xx-fpga", it doesn't apply
to them.
Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260409122016.3940462-3-philpem@philpem.me.uk
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add device tree binding documentation for the Altera Cyclone II FPGA
found on Technologic Systems (now EmbeddedTS) TS-7300 boards, programmed
via the memory-mapped interface in the CPLD.
Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409122016.3940462-2-philpem@philpem.me.uk
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
pattern_write() reports -EFAULT when copy_from_user() fails, but
pattern_read() converts copy_to_user() failures into a zero-length read.
That makes a userspace buffer fault look like EOF instead of reporting the
actual error.
Return -EFAULT from pattern_read() when copying the pattern data to
userspace fails, and update the file offset only after a successful copy.
Fixes: 315a3d57c6 ("ALSA: Implement the new Virtual PCM Test Driver")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260501-alsa-pcmtest-pattern-read-efault-v1-1-53e1e8c11dda@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use a flexible array member to simplify allocation slightly.
Add the header as flexible array members require full definitions.
Remove null check and just kfree. The former is not needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260430210413.31185-1-rosenp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Fixes: 4710317891 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by list
expressions, some of them using the PCI_DEVICE macros. This isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse. Also use PCI_DEVICE* helper macros to
assign .vendor, .device, .subvendor and .subdevice where appropriate and
skip explicit assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260430135255.279393-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit d021985504 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.
The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.
Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().
Fixes: d021985504 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
window where a softirq may be taken before fpregs_lock() is
called, but after efi_rts_work.efi_rts_id has been assigned,
and any page faults occurring in that window will then be
misidentified as having been caused by the firmware. Instead,
use !in_task(), which incorporates in_serving_softirq(). ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The datasheet of lontium-lt8912b doesn't require blanking during
the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge
as the DSI host.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250728150059.2642055-1-max.oss.09@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Generation of a test pattern output is a useful tool for panel bringup and
debugging, and very simple to support with this chip.
The value of REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW needs to be divided by two
for the test pattern to work in dual LVDS mode. While not clearly stated in
the datasheet, this is needed according to the DSI Tuner [0] output. And
some dual-LVDS panels refuse to show any picture without this division by
two.
[0] https://www.ti.com/tool/DSI-TUNER
Reviewed-by: Louis Chauvet <louis.chauvet@boootlin.com>
Link: https://patch.msgid.link/20260416-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v3-1-143886aebc6b@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The GPIO_LINE_DIRECTION_* definitions have just recently been exposed to
gpio consumers.h by breaking them out in a separate defs.h file.
Use this to validate the gpio direction instead of the hard-coded literal.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The VSPD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,r9a07g044-vsp2` will be used
as a fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/c1e2eb36af01e0cddd8050ba70847c3a0821c91e.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,fcpv` will be used as a
fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/5aaf561a66c24639477a99d3861ca969a81673f0.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The VSPD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L VSPD.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330105637.130189-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L FCPVD IP.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330110012.131273-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
On R-Car X5H, PRR is inside the MFIS memory block, so we need to access
it similar to e.g. RZ/G2L.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260402112709.13002-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
