If lpfc_issue_reg_vfi() returns an error in lpfc_rcv_plogi(), then
execution of lpfc_rcv_plogi() continues and lpfc_reg_rpi() is called, which
allocates an mbuf. When this REG_RPI mailbox is issued, it inevitably
fails because the VFI is not registered. However, the REG_RPI failure does
not free the mbuf that was allocated in lpfc_reg_rpi() because there is no
check for mbox error status in lpfc_defer_plogi_acc().
Fix by adding a check in lpfc_rcv_plogi() if lpfc_reg_vfi() fails, then
exit early. Also, add mailbox status check in lpfc_defer_plogi_acc to
enter the REG_RPI mbox_cmpl functions and free the allocated mbuf.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update log message to display the entirety of an MCQE for which there is no
submission context. This log message is not expected to occur and hence is
tagged as a LOG_TRACE_EVENT. As such, move the hbalock release to before
this log message so that the trace event process does not hold the hbalock
for too long.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When specifying rq version, it is preferred to refer to SLI4 interface type
instead of the get_sli4_parameters mailbox command response. If SLI4
if_type is 2 or above, then the newer version 1 is used for rq_create
mailbox commands. Otherwise, version 0 is used and is meant for older
adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the lpfc_next_online_cpu() call is to save the CPU index for
the next iteration of the for (index = 0; index < vectors; index++) loop.
Because we’ve reached the last iteration of the loop, cpumask_next(cpu,
aff_mask) returns nr_cpu_ids. Thus, if we already know we've reached the
last iteration of the IRQ affinity assignment loop, then we can just break
and exit.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward.
Fixes: 286a837217 ("stmmac: add CHAINED descriptor mode support (V4)")
Cc: stable@vger.kernel.org
Signed-off-by: Tyllis Xu <LivelyCarpet87@gmail.com>
Link: https://patch.msgid.link/20260401044708.1386919-1-LivelyCarpet87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the include directives and forward declarations that are missing
from the UFS core header files. This prevents compilation failures if
include directives are reordered.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260401202506.1445324-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nothing in the ufshcd-crypto.h header file depends on the ufshcd-priv.h
header file. Hence, stop including that header file. This include
directive was introduced by commit 4bc26113c6 ("scsi: ufs: Split the
ufshcd.h header file").
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260401202506.1445324-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the aspects of ufshcd_mcq_compl_all_cqes_lock() that are
nontrivial in a comment block above this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260401202506.1445324-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb.
Fixes: bbd2190ce9 ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260401211218.279185-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Chaignon says:
====================
Fix invariant violations and improve branch detection
This patchset fixes invariant violations on register bounds. These
invariant violations cause a warning and happen when reg_bounds_sync is
trying to refine register bounds while walking an impossible branch.
This patchset takes this situation as an opportunity to improve
verification performance. That is, the verifier will use the invariant
violations as a signal that a branch cannot be taken and process it as
dead code.
This patchset implements this approach and covers it in selftests with
a new invariant violation case. Some of the logic in reg_bounds_sync
likely acts as a duplicate with logic from is_scalar_branch_taken. This
patchset does not attempt to remove superfluous logic from
is_scalar_branch_taken and leaves it to a future patchset (ex. once
syzbot has confirmed that all invariant violations are fixed).
In the future, there is also a potential opportunity to simplify
existing logic by merging reg_bounds_sync and range_bounds_violation
(have reg_bounds_sync error out on invariant violation). That is
however not needed to fix invariant violation, which we focus on in
this patchset.
Changes in v3:
- Rename and refactor the helper functions checking for tnum-related
invariant violations (Mykyta).
- Small changes to comment style in verifier changes and new selftest
(Mykyta).
- Rebased.
Changes in v2:
- Moved tmp registers to env in preparatory commit (Eduard).
- Updated reg_bounds_sync to bail out in case of ill-formed
registers, thus avoiding one set of invariant violation checks in
simulate_both_branches_taken (Eduard).
- Drop the Fixes tag to avoid misleading backporters (Shung-Hsi).
- Improve wording of commit descriptions (Shung-Hsi, Hari).
- Fix error in code comments (AI bot).
- Rebased.
====================
Link: https://patch.msgid.link/cover.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the changes to the verifier in previous commits, we're not
expecting any invariant violations anymore. We should therefore always
enable BPF_F_TEST_REG_INVARIANTS to fail on invariant violations. Turns
out that's already the case and we've been explicitly setting this flag
in selftests when it wasn't necessary. This commit removes those flags
from selftests, which should hopefully make clearer that it's always
enabled.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/9afce92510a7d44569dc3af63c9b8c608e69298a.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a selftest for the change in the previous patch. The
selftest is derived from a syzbot reproducer from [1] (among the 22
reproducers on that page, only 4 still reproduced on latest bpf tree,
all being small variants of the same invariant violation).
The test case failure without the previous patch is shown below.
0: R1=ctx() R10=fp0
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (bf) r5 = r0 ; R0=scalar(id=1) R5=scalar(id=1)
2: (57) r5 &= -4 ; R5=scalar(smax=0x7ffffffffffffffc,umax=0xfffffffffffffffc,smax32=0x7ffffffc,umax32=0xfffffffc,var_off=(0x0; 0xfffffffffffffffc))
3: (bf) r7 = r0 ; R0=scalar(id=1) R7=scalar(id=1)
4: (57) r7 &= 1 ; R7=scalar(smin=smin32=0,smax=umax=smax32=umax32=1,var_off=(0x0; 0x1))
5: (07) r7 += -43 ; R7=scalar(smin=smin32=-43,smax=smax32=-42,umin=0xffffffffffffffd5,umax=0xffffffffffffffd6,umin32=0xffffffd5,umax32=0xffffffd6,var_off=(0xffffffffffffffd4; 0x3))
6: (5e) if w5 != w7 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xffffffd5, 0xffffffffffffffd4] s64=[0x80000000ffffffd5, 0x7fffffffffffffd4] u32=[0xffffffd5, 0xffffffd4] s32=[0xffffffd5, 0xffffffd4] var_off=(0xffffffd4, 0xffffffff00000000)
R5 and R7 are prepared such that their tnums intersection results in a
known constant but that constant isn't within R7's u32 bounds.
is_branch_taken isn't able to detect this case today, so the verifier
walks the impossible fallthrough branch. After regs_refine_cond_op and
reg_bounds_sync refine R5 on the assumption that the branch is taken,
the impossibility becomes apparent and results in an invariant violation
for R5: umin32 is greater than umax32.
The previous patch fixes this by using regs_refine_cond_op and
reg_bounds_sync in is_branch_taken to detect the impossible branch. The
fallthrough branch is therefore correctly detected as dead code.
Link: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5 [1]
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/b1e22233a3206ead522f02eda27b9c5c991a0de9.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch fixes the invariant violations that can happen after we
refine ranges & tnum based on an incorrectly-detected branch condition.
For example, the branch is always true, but we miss it in
is_branch_taken; we then refine based on the branch being false and end
up with incoherent ranges (e.g. umax < umin).
To avoid this, we can simulate the refinement on both branches. More
specifically, this patch simulates both branches taken using
regs_refine_cond_op and reg_bounds_sync. If the resulting register
states are ill-formed on one of the branches, is_branch_taken can mark
that branch as "never taken".
On a more formal note, we can deduce a branch is not taken when
regs_refine_cond_op or reg_bounds_sync returns an ill-formed state
because the branch operators are sound (verified with Agni [1]).
Soundness means that the verifier is guaranteed to produce sound
outputs on the taken branches. On the non-taken branch (explored
because of imprecision in the bounds), the verifier is free to produce
any output. We use ill-formedness as a signal that the branch is dead
and prune that branch.
This patch moves the refinement logic for both branches from
reg_set_min_max to their own function, simulate_both_branches_taken,
which is called from is_scalar_branch_taken. As a result,
reg_set_min_max now only runs sanity checks and has been renamed to
reg_bounds_sanity_check_branches to reflect that.
We have had five patches fixing specific cases of invariant violations
in the past, all added with selftests:
- commit fbc7aef517 ("bpf: Fix u32/s32 bounds when ranges cross
min/max boundary")
- commit efc11a6678 ("bpf: Improve bounds when tnum has a single
possible value")
- commit f41345f47f ("bpf: Use tnums for JEQ/JNE is_branch_taken
logic")
- commit 00bf8d0c6c ("bpf: Improve bounds when s64 crosses sign
boundary")
- commit 6279846b9b ("bpf: Forget ranges when refining tnum after
JSET")
To confirm that this patch addresses all invariant violations, we have
also reverted those five commits and verified that their related
selftests don't cause any invariant violation warnings anymore. Those
selftests still fail but only because of misdetected branches or
less-precise bounds than expected. This demonstrates that the current
patch is enough to avoid the invariant violation warning AND that the
previous five patches are still useful to improve branch detection.
In addition to the selftests, this change was also tested with the
Cilium complexity test suite: all programs were successfully loaded and
it didn't change the number of processed instructions.
Link: https://github.com/bpfverif/agni [1]
Reported-by: syzbot+c950cc277150935cc0b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5
Co-developed-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/a166b54a3cbbbdbcdf8a87f53045f1097176218b.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the subsequent commit, to prune dead branches we will rely on
detecting ill-formed ranges using range_bounds_violations()
(e.g., umin > umax) after refining register bounds using
regs_refine_cond_op().
However, reg_bounds_sync() can sometimes "repair" ill-formed bounds,
potentially masking a violation that was produced by
regs_refine_cond_op().
This commit modifies reg_bounds_sync() to exit early if an invariant
violation is already present in the input.
This ensures ill-formed reg_states remain ill-formed after
reg_bounds_sync(), allowing simulate_both_branches_taken() to correctly
identify dead branches with a single check to range_bounds_violation().
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/73127d628841c59cb7423d6bdcd204bf90bcdc80.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a subsequent patch, the regs_refine_cond_op and reg_bounds_sync
functions will be called in is_branch_taken instead of reg_set_min_max,
to simulate each branch's outcome. Since they will run before we branch
out, these two functions will need to work on temporary registers for
the two branches.
This refactoring patch prepares for that change, by introducing the
temporary registers on bpf_verifier_env and using them in
reg_set_min_max.
This change also allows us to save one fake_reg slot as we don't need to
allocate an additional temporary buffer in case of a BPF_K condition.
Finally, you may notice that this patch removes the check for
"false_reg1 == false_reg2" in reg_set_min_max. That check was introduced
in commit d43ad9da80 ("bpf: Skip bounds adjustment for conditional
jumps on same scalar register") to avoid an invariant violation. Given
that "env->false_reg1 == env->false_reg2" doesn't make sense and
invariant violations are addressed in a subsequent commit, this patch
just removes the check.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/260b0270052944a420e1c56e6a92df4d43cadf03.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit refactors reg_bounds_sanity_check to factor out the logic
that performs the sanity check from the logic that does the reporting.
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/198ec3e69343e2c46dc9cbe2b1bc9be9ae2df5bd.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the following compiler warnings:
aicasm_gram.y:1107:24: warning: comparison of different enumeration types
('scope_type' and 'enum yytokentype') [-Wenum-compare]
1107 | || last_scope->type == T_ELSE) {
| ~~~~~~~~~~~~~~~~ ^ ~~~~~~
aicasm_scan.l:392:14: warning: using the result of an assignment as a condition
without parentheses [-Wparentheses]
392 | while (c = *yptr++) {
| ~~^~~~~~~~~
aicasm_macro_scan.l:153:1: warning: non-void function does not return a value
[-Wreturn-type]
153 | }
| ^
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260402153341.2909184-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in a dev_err() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260331153049.1344957-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The build_id parsing functions calculate a filename length from the
event header size and read directly into a stack buffer of PATH_MAX
bytes without bounds checking. A malformed perf.data file with a
crafted header.size can cause the length to be negative or exceed
PATH_MAX, resulting in a stack buffer overflow.
Add bounds checking for the filename length in both
perf_header__read_build_ids() and the ABI quirk variant. Print a
warning message when invalid length is detected.
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Return -ENOENT when no metric/group matches, and directly use the return
value from expr__find_ids(), so -EINVAL is reserved for parse failures.
Print separate logs to make it clear.
Before:
perf stat -C 5 -vvv
Using CPUID 0x00000000410fd490
metric expr 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES) for backend_bound
parsing metric: 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES)
Failure to read '#slots'
literal: #slots = nan
syntax error
Cannot find metric or group `Default'
After:
perf stat -C 5 -vvv
Using CPUID 0x00000000410fd490
metric expr 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES) for backend_bound
parsing metric: 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES)
Failure to read '#slots'
literal: #slots = nan
syntax error
Fail to parse metric or group `Default'
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a trailing newline for logs.
Before:
perf stat -C 5
Failure to read '#slots'Cannot find metric or group `Default'
After:
perf stat -C 5
Failure to read '#slots'
Cannot find metric or group `Default'
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
expr__find_ids() propagates the parser return value directly. For syntax
errors, the parser can return a positive value, but callers treat it as
success, e.g., for below case on Arm64 platform:
metric expr 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES) for backend_bound
parsing metric: 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES)
Failure to read '#slots' literal: #slots = nan
syntax error
Convert positive parser returns in expr__find_ids() to -EINVAL, as a
result, the error value will be respected by callers.
Before:
perf stat -C 5
Failure to read '#slots'Failure to read '#slots'Failure to read '#slots'Failure to read '#slots'Segmentation fault
After:
perf stat -C 5
Failure to read '#slots'Cannot find metric or group `Default'
Fixes: ded80bda8b ("perf expr: Migrate expr ids table to a hashmap")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
hpsa formats the controller name into h->devname[8] and derives
interrupt names from it in h->intrname[][16]. Once host_no reaches four
digits, "hpsa%d" no longer fits in devname, and the derived IRQ names
can then overrun the interrupt-name buffers as well.
The previous fix switched these builders to bounded formatting, but that
would truncate user-visible controller and IRQ names. Keep the existing
names intact instead by enlarging the fixed buffers to cover the current
formatted strings.
Fixes: 2946e82bdd ("hpsa: use scsi host_no as hpsa controller number")
Fixes: 8b47004a55 ("hpsa: add interrupt number to /proc/interrupts interrupt name")
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260401120552.78541-1-pengpeng@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Satish Kharat says:
====================
enic: SR-IOV V2 preparatory infrastructure
This is the first of four series adding SR-IOV V2 support to the enic
driver for Cisco VIC 14xx/15xx adapters.
The existing V1 SR-IOV implementation has VFs that interact directly
with the VIC firmware, leaving the PF driver with no visibility or
control over VF behavior. V2 introduces a PF-mediated model where VFs
communicate with the PF through a mailbox over a dedicated admin
channel. This brings enic in line with the standard Linux SR-IOV
model, enabling full PF management of VFs via ip link (MAC, VLAN,
link state, spoofchk, trust, and per-VF statistics).
This preparatory series adds detection and resource helper code with
no functional change to existing driver behavior:
- Extend BAR resource discovery for admin channel resources
- Register the V2 VF PCI device ID
- Detect VF type (V1/V2/usNIC) from SR-IOV PCI capability
- Make enic_dev_enable/disable ref-counted for shared use by data
path and admin channel
- Add type-aware resource allocation for admin WQ/RQ/CQ/INTR
- Detect presence of admin channel resources at probe time
Tested on VIC 14xx and 15xx series adapters with V2 VFs under KVM
(sriov_numvfs, VF passthrough, ip link VF configuration, VF traffic).
Based in part on initial work by Christian Benvenuti.
====================
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-0-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check for the presence of admin channel BAR resources
(RES_TYPE_ADMIN_WQ, ADMIN_RQ, ADMIN_CQ, SRIOV_INTR) during resource
discovery. Set has_admin_channel when all four are available.
Use ARRAY_SIZE(enic->admin_cq) for the admin CQ count check since the
driver allocates two admin CQs (one for WQ completions, one for RQ
completions) and both must be backed by hardware resources.
Add admin WQ, RQ, CQ and INTR fields to struct enic for use by the
upcoming admin channel open/close paths.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-6-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing vnic_wq_alloc(), vnic_rq_alloc(), vnic_cq_alloc() and
vnic_intr_alloc() hardcode data-path resource types (RES_TYPE_WQ,
RES_TYPE_RQ, RES_TYPE_CQ, RES_TYPE_INTR_CTRL). The upcoming admin
channel uses different BAR resource types (RES_TYPE_ADMIN_WQ/RQ/CQ,
RES_TYPE_SRIOV_INTR) for its queues.
Add _with_type() variants that accept an explicit resource type
parameter. Refactor the original functions as thin wrappers that
pass the default data-path type. No functional change.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-5-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both the data path (ndo_open/ndo_stop) and the upcoming admin channel
need to enable and disable the vNIC device independently. Without
reference counting, closing the admin channel while the netdev is up
would inadvertently disable the entire device.
Add an enable_count to struct enic, protected by the existing
devcmd_lock. enic_dev_enable() issues CMD_ENABLE_WAIT only on the
first caller (0 -> 1 transition), and enic_dev_disable() issues
CMD_DISABLE only when the last caller releases (1 -> 0 transition).
Also check the return value of enic_dev_enable() in enic_open() and
fail the open if the firmware enable command fails. Without this check,
a failed enable leaves enable_count at zero while the interface appears
up, which can cause a later admin channel enable/disable cycle to
incorrectly disable the hardware under the active data path.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-4-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read the VF device ID from the SR-IOV PCI capability at probe time to
determine whether the PF is configured for V1, USNIC, or V2 virtual
functions. Store the result in enic->vf_type for use by subsequent
SR-IOV operations.
The VF type is a firmware-configured property (set via UCSM, CIMC,
Intersight etc) that is immutable from the driver's perspective. Only
PFs are probed for this capability; VFs and dynamic vnics skip
detection.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-3-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register the V2 VF PCI device ID (0x02b7) so the driver binds to V2
virtual functions created via sriov_configure. Update enic_is_sriov_vf()
to recognize V2 VFs alongside the existing V1 type.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-2-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VIC firmware exposes admin channel resources (WQ, RQ, CQ) for PF-VF
communication when SR-IOV is active. Add the corresponding resource
type definitions and teach the discovery and access functions to
handle them.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260401-enic-sriov-v2-prep-v4-1-d5834b2ef1b9@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolai Buchwitz says:
====================
net: phy: microchip: add downshift support for LAN88xx
Add standard ETHTOOL_PHY_DOWNSHIFT tunable support for the Microchip
LAN88xx PHY, following the same pattern used by Marvell and other PHY
drivers.
Ethernet cables with faulty or missing pairs (specifically C and D)
can successfully auto-negotiate 1000BASE-T but fail to establish a
stable link. The LAN88xx PHY supports automatic downshift to
100BASE-TX after a configurable number of failed attempts (2-5).
Patch 1 adds the get/set tunable implementation.
Patch 2 enables downshift by default with a count of 2. The setting is
stored in the driver's private data so that user changes via ethtool are
preserved across suspend/resume cycles.
Based on an earlier downstream implementation by Phil Elwell.
Tested on Raspberry Pi 3B+ (LAN7515/LAN88xx).
====================
Link: https://patch.msgid.link/20260401123848.696766-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable auto-downshift from 1000BASE-T to 100BASE-TX after 2 failed
auto-negotiation attempts by default. This ensures that links with
faulty or missing cable pairs (C and D) fall back to 100Mbps without
requiring userspace configuration.
The downshift count is stored in the driver's private data and applied
in config_init, so user changes via ethtool are preserved across
suspend/resume cycles.
Users can override or disable downshift at runtime:
ethtool --set-phy-tunable eth0 downshift off
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260401123848.696766-3-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the standard ETHTOOL_PHY_DOWNSHIFT tunable for the LAN88xx
PHY. This allows runtime configuration of the auto-downshift feature
via ethtool:
ethtool --set-phy-tunable eth0 downshift on count 3
The LAN88xx PHY supports downshifting from 1000BASE-T to 100BASE-TX
after 2-5 failed auto-negotiation attempts. Valid count values are
2, 3, 4 and 5.
This is based on an earlier downstream implementation by Phil Elwell.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260401123848.696766-2-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following helper functions for SRAM2 access to simplify the code
and improve readability:
- sram2_write() - write data to SRAM2 address
- sram2_read() - read data from SRAM2 address
- sram2_write_w0w1() - read-modify-write operation
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260401115542.34601-1-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose LED1 and LED2 pins via the PHY LED framework. Each pin has a
source mask (MASK_LOW + MASK_EXT registers) selecting which hardware
events light it, plus a CTL field in the shared 0xA83B register
(RMW; LED4 is firmware-controlled per the datasheet).
Hardware can offload per-speed link triggers (1000/2500/5000/10000),
RX/TX activity, and force-on. LINK_100 is accepted only alongside
LINK_1000: source bit 4 lights at both speeds and 100-alone isn't
representable, so the unrepresentable case falls to software.
The chip has five LED pins; only LED1/LED2 are exposed here as those
are the only ones characterized on tested hardware. LED4 is firmware-
controlled regardless of strap configuration.
Tested on TRENDnet TEG-S750 (LED1/LED2 wired to an antiparallel
bicolor LED): brightness_set via sysfs; netdev trigger offloaded=1
with amber lit at 100M/1G/2.5G and green lit at 10G via respective
link_* modes; LED off immediately on cable unplug with no software
involvement.
Signed-off-by: Daniel Wagner <wagner.daniel.t@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260401114931.3091818-1-wagner.daniel.t@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
macvlan: broadcast delivery changes
First patch adds data-race annotations.
Second patch changes macvlan_broadcast_enqueue() to return
early if the queue is full.
====================
Link: https://patch.msgid.link/20260401103809.3038139-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under high stress, we spend a lot of time cloning skbs,
then acquiring a spinlock, then freeing the clone because
the queue is full.
Add a shortcut to avoid these costs under pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260401103809.3038139-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
port->bc_queue_len_used is read and written locklessly,
add READ_ONCE()/WRITE_ONCE() annotations.
While WRITE_ONCE() in macvlan_fill_info() is not yet needed,
it is a prereq for future RTNL avoidance.
Fixes: d4bff72c84 ("macvlan: Support for high multicast packet rate")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260401103809.3038139-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the ZSTD algorithm for QAT GEN4, GEN5 and GEN6 via the
acomp API.
For GEN4 and GEN5, compression is performed in hardware using LZ4s, a
QAT-specific variant of LZ4. The compressed output is post-processed to
generate ZSTD sequences, and the ZSTD library is then used to produce
the final ZSTD stream via zstd_compress_sequences_and_literals(). Only
inputs between 8 KB and 512 KB are offloaded to the device. The minimum
size restriction will be relaxed once polling support is added. The
maximum size is limited by the use of pre-allocated per-CPU scratch
buffers. On these generations, only compression is offloaded to hardware;
decompression always falls back to software.
For GEN6, both compression and decompression are offloaded to the
accelerator, which natively supports the ZSTD algorithm. There is no
limit on the input buffer size supported. However, since GEN6 is limited
to a history size of 64 KB, decompression of frames compressed with a
larger history falls back to software.
Since GEN2 devices do not support ZSTD or LZ4s, add a mechanism that
prevents selecting GEN2 compression instances for ZSTD or LZ4s when a
GEN2 plug-in card is present on a system with an embedded GEN4, GEN5 or
GEN6 device.
In addition, modify the algorithm registration logic to allow
registering the correct implementation, i.e. LZ4s based for GEN4 and
GEN5 or native ZSTD for GEN6.
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace __builtin_bswap32() with swab32 in icp_qat_hw_20_comp.h to fix
the following build errors on architectures without native byte-swap
support:
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_decomp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xeec): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xef8): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_comp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf64): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf7c): undefined reference to `__bswapsi2'
Fixes: 5b14b2b307 ("crypto: qat - enable deflate for QAT GEN4")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603290259.Ig9kDOmI-lkp@intel.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In img_hash_digest(), remove the redundant return variable 'err' and
return img_hash_handle_queue() directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify img_hash_digest() and remove
the now-unused local 'struct img_hash_dev *' variables. Use 'ctx->hdev'
when calling img_hash_handle_queue() instead of 'tctx->hdev'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enabling any template selects CRYPTO_MANAGER, which causes
CRYPTO_MANAGER2 to enable itself, which selects every algorithm type
option. However, pulling in all algorithm types is needed only when the
self-tests are enabled. So condition the selections accordingly.
To make this possible, also add the missing selections to various
symbols that were relying on transitive selections via CRYPTO_MANAGER.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace scatterwalk_map_and_copy() with memcpy_from_sglist() in
aspeed_ahash_dma_prepare(). The latter provides a simpler interface
without requiring a direction parameter, making the code easier to
read and less error-prone.
No functional change intended.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since DES and Triple DES are obsolete, there is very little point in
maintining architecture-optimized code for them. Remove it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since DES and Triple DES are obsolete, there is very little point in
maintining architecture-optimized code for them. Remove it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since DES and Triple DES are obsolete, there is very little point in
maintining architecture-optimized code for them. Remove it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
