The list of supported chips in the header is incomplete and contains no
other information not readily available. Remove the list and instead
hint that the chips supported by this driver have 219/226 compatible
register layout [unlike the ones supported by e.g. ina238].
Remove the unused INA226_DIE_ID define.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20260303-ina234-shift-v1-1-318c33ac4480@pengutronix.de
[groeck: macro -> define in commit message]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add hardware monitoring support for the LattePanda Sigma SBC
(DFRobot, ITE IT8613E EC). The driver reads fan speed and
temperatures via direct port I/O, as the BIOS disables the
ACPI EC interface.
Signed-off-by: Mariano Abad <weimaraner@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the hwmon ACPI power meter driver to a
platform one.
After this change, the subordinate hwmon device will be registered
under the platform device representing the ACPI power meter, sysfs
notifications will trigger on that device, and diagnostic messages
will be printed relative to it instead of its ACPI companion.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1952740.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2405555.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since acpi_power_meter_notify() and acpi_power_meter_remove() are
.notify() and .remove() callback functions of an ACPI driver,
respectively, the first argument of the former and the only argument
of the latter cannot be NULL. Likewise, the acpi_power_meter_resume()
argument cannot be NULL because it is a system resume callback
function.
Moreover, since all of these functions can only run after
acpi_power_meter_add() has returned 0, the driver_data field in the
struct acpi_device object used by them cannot be NULL either.
Accordingly, drop the redundant "device" checks against NULL from
acpi_power_meter_notify() and acpi_power_meter_remove(), drop the
redundant "dev" check against NULL from acpi_power_meter_resume(),
and drop the redundant acpi_driver_data() checks against NULL from
all of these functions.
Additionally, combine the initialization of the "resource" local
variable in acpi_power_meter_notify() and acpi_power_meter_remove()
with its declaration.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5085645.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
TMP110 and TMP113 temperature sensors are software compatible
with TMP102 sensor but have different accuracy (maximum error).
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260225095132.29954-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend the PMBus core vrm_version handling to support NVIDIA nvidia195mv
VID mode. This adds a new VRM/VID encoding type and the corresponding
voltage conversion logic so devices reporting nvidia195mv can have their
VOUT/VID values interpreted correctly by the hwmon PMBus core.
Signed-off-by: Ashish Yadav <ashish.yadav@infineon.com>
Link: https://lore.kernel.org/r/20260223050804.4287-3-Ashish.Yadav@infineon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add of_device_id table to allow the driver to be matched via
Device Tree. This is required for supporting the AHT10/20/DHT20
sensors on platforms using DT.
Signed-off-by: Hao Yu <haoyufine@gmail.com>
Link: https://lore.kernel.org/r/20260223173853.30617-3-haoyufine@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Aosong AHT10, AHT20 and DHT20 temperature and humidity sensors
to the trivial-devices documentation. These sensors use a standard
I2C interface and do not require complex binding definitions.
Signed-off-by: Hao Yu <haoyufine@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260223173853.30617-2-haoyufine@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
INA234 is register compatible to INA226 (excepting manufacturer and die
or device id registers) but has different scaling.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu> # v2
Tested-by: Jens Almer <bagawk@gmail.com>
Tested-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20260220112024.97446-4-ian.ray@gehealthcare.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Make sysfs entries documentation easier to maintain.
* Use multi-line enum.
* Correct "has_power_average" comment.
Create a new "has_update_interval" member for chips which support
averaging.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu> # v2
Tested-by: Jens Almer <bagawk@gmail.com>
Link: https://lore.kernel.org/r/20260220112024.97446-3-ian.ray@gehealthcare.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a compatible string for the INA234 device, which is like INA226 but
has different scaling.
Note that the device tree compatible must be different since the driver
uses the compatible to configure the scaling.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> # v1
Tested-by: Jens Almer <bagawk@gmail.com>
Link: https://lore.kernel.org/r/20260220112024.97446-2-ian.ray@gehealthcare.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The GPD Win 5 is a new device by GPD with an AMD AI MAX 385/395 chip.
It uses the same fan control registers as the GPD Win Duo. This
information was provided by GPD.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20260220161601.2344291-1-lkml@antheas.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Prevent the system from becoming unstable or unusable due to a flood of
memory allocation error messages under memory pressure.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/alpine.DEB.2.21.2603291252380.60268@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries.
Fixes: 6a4d0774f0 ("bnxt_en: Add support for new backing store query firmware API")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260328234357.43669-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netfilter flowtable can theoretically try to offload flower rules as soon
as a net_device is registered while all the other ones are not
registered or initialized, triggering a possible NULL pointer dereferencing
of qdma pointer in airoha_ppe_set_cpu_port routine. Moreover, if
register_netdev() fails for a particular net_device, there is a small
race if Netfilter tries to offload flowtable rules before all the
net_devices are properly unregistered in airoha_probe() error patch,
triggering a NULL pointer dereferencing in airoha_ppe_set_cpu_port
routine. In order to avoid any possible race, delay offloading until
all net_devices are registered in the networking subsystem.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260329-airoha-regiser-race-fix-v2-1-f4ebb139277b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized.
Fixes: 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260328211436.1010152-1-echelonh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
begin_cpu_udmabuf() maps the sg_table with the caller-provided direction
(e.g., DMA_TO_DEVICE for a write-only sync), and caches it in ubuf->sg
for reuse. However, release_udmabuf() always unmaps this sg_table with
a hardcoded DMA_BIDIRECTIONAL, regardless of the direction that was
originally used for the mapping.
With CONFIG_DMA_API_DEBUG=y this produces:
DMA-API: misc udmabuf: device driver frees DMA memory with different
direction [device address=0x000000044a123000] [size=4096 bytes]
[mapped with DMA_TO_DEVICE] [unmapped with DMA_BIDIRECTIONAL]
The issue was found during video playback when GStreamer performed a
write-only DMA_BUF_IOCTL_SYNC on a udmabuf. It can be reproduced
with CONFIG_DMA_API_DEBUG=y by creating a udmabuf from a memfd,
performing a write-only sync (DMA_BUF_SYNC_WRITE without
DMA_BUF_SYNC_READ), and closing the file descriptor.
Fix this by storing the DMA direction used when the sg_table is first
created in begin_cpu_udmabuf(), and passing that same direction to
put_sg_table() in release_udmabuf().
Fixes: 284562e1f3 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patch.msgid.link/20260314232722.15555-1-mikhail.v.gavrilov@gmail.com
Using a sg_set_folio() loop for every 4K results in a malformed scatterlist
because sg_set_folio() has an issue with offsets > PAGE_SIZE and because
scatterlist expects the creator to build a list which consolidates any
physical contiguity.
sg_alloc_table_from_pages() creates a valid scatterlist directly from a
struct page array, so go back to that.
Remove the offsets allocation and just store an array of tail pages as it
did before the below commit. Everything wants that anyhow.
Fixes: 0c8b91ef51 ("udmabuf: add back support for mapping hugetlb pages")
Reported-by: Julian Orth <ju.orth@gmail.com>
Closes: https://lore.kernel.org/all/20260308-scatterlist-v1-1-39c4566b0bba@gmail.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patch.msgid.link/0-v1-42779f29381a+4b9-udmabuf_sg_jgg@nvidia.com
Russell King says:
====================
net: stmmac: qcom-ethqos: more cleanups
Further cleanups to qcom-ethqos, mainly concentrating on the RGMII
code, making it clearer what the differences are for each speed, thus
making the code more readable.
I'm still not really happy with this. The speed specific configuration
remains split between ethqos_fix_mac_speed_rgmii() and
ethqos_rgmii_macro_init(), where the latter is only ever called from
the former. So, I think further work is needed here - maybe it needs
restructuring into the various componenet parts of the RGMII block?
====================
Link: https://patch.msgid.link/acZDEg9wdjhBTHlL@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the determination of the phase shift enable alongside the register
update, and make "phase_shift" unsigned.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62o3-0000000E3DE-3Vf8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment for calculating the prg_rclk_dly value is incorrect as it
omits the brackets around the divisor. Add the brackets to allow the
reader to correctly evaluate the value. Validated with the values given
in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62ny-0000000E3D8-38Yp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the loopback decision next to the register update, and make the
local variable unsigned. As a result, there is now no need for the
comment referring to the programming being later.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nt-0000000E3D2-2fWk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than coding the entire register update twice with different
values, use a local variable to specify the value and have one
register update statement that uses this local variable. This results
in neater code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62no-0000000E3Cw-2EmH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the RCLK delay configuration out of the switch, which just leaves
the RGMII_CONFIG_LOOPBACK_EN setting in all three paths. This makes it
trivial to eliminate the switch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nj-0000000E3Cq-1lPL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RGMII_CONFIG2_RX_PROG_SWAP out of the switch. 1G speed always
sets this field. 100M and 10M sets it for has_emac_ge_3 devices,
otherwise it is cleared.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62ne-0000000E3Ck-1Haf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All paths through the switch clear the RGMII_CONFIG2_RSVD_CONFIG15
field. move it out of the switch statement.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nZ-0000000E3Ce-0lyP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the speed programming for 100M and 10M out of the switch. There
is no programming done for 1G speed.
It looks like there are two fields, 7:6 which are programemd to '1'
to select a /2 divisor for 100M, and bits 16:8 which are programmed
to '19' to select a /20 divisor.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nU-0000000E3CX-0KF9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RGMII_CONFIG2_DATA_DIVIDE_CLK_SEL is always cleared, and
RGMII_CONFIG2_TX_CLK_PHASE_SHIFT_EN is always updated with the phase
shift in each path through the switch, so these are independent of
the speed. Move them out.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nO-0000000E3CR-445p@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RGMII_CONFIG_BYPASS_TX_ID_EN, RGMII_CONFIG_POS_NEG_DATA_SEL and
RGMII_CONFIG_PROG_SWAP. There are two states for these: one group for
1G, and the logical inversion for 100M and 10M. Move this out of the
switch into an if-else clause.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nJ-0000000E3CL-3YSr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RGMII_CONFIG_DDR_MODE is always set irrespective of the speed. Move
this out of the switch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62nE-0000000E3CF-331r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move detection of invalid RGMII speeds (which will never be triggered)
before the switch() to allow register modifications that are common to
all speeds to be moved out of the switch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62n9-0000000E3C9-2Zkr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ethqos_fix_mac_speed() is called via a function pointer, and only
indirects via the configure_func function pointer, eliminate this
unnecessary indirection.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62n4-0000000E3C3-251S@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than getting the stmmac_priv pointer in
ethqos_configure_sgmii(), move it into ethqos_pcs_set_inband() and pass
the struct qcom_ethqos pointer instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62mz-0000000E3Bx-1Xd8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethqos_configure() does nothing more than indirect via
ethqos->configure_func, and is only called from ethqos_fix_mac_speed()
just below. Move the indirect call into ethqos_fix_mac_speed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1w62mu-0000000E3Bq-15wa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to properly cleanup hw rx QDMA queues and bring the device to
the initial state, reset rx DMA queue head/tail index. Moreover, reset
queued DMA descriptor fields.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Tested-by: Madhur Agrawal <Madhur.Agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260327-airoha_qdma_cleanup_rx_queue-fix-v1-1-369d6ab1511a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Stratix10 devkit supports a separate eMMC daughter card. The eMMC
daughter card replaces the SDMMC slot that is on the default daughter card
and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Stratix 10 devkit support a separate eMMC daughter card. Add compatible
string for the Stratix 10 SoCDK eMMC daughter board with
"altr,socfpga-stratix10-socdk" as a fallback, since this variant is based
on the standard SoCDK board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
