Patch series "lib: polynomial: Move to math/ and clean up", v2.
While removing Baikal SoC and platform code pieces I found that this code
belongs to lib/math/ rather than generic lib/. Hence the move and
followed up cleanups.
This patch (of 3):
The algorithm behind polynomial belongs to our collection of math
equations and expressions handling. Move it to math/ subfolder where
others of the kind are located.
Link: https://lkml.kernel.org/r/20260302092831.2267785-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzbot detected a circular locking dependency. the scenarios:
CPU0 CPU1
---- ----
lock(&ocfs2_quota_ip_alloc_sem_key);
lock(&ocfs2_sysfile_lock_key[USER_QUOTA_SYSTEM_INODE]);
lock(&ocfs2_quota_ip_alloc_sem_key);
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
or:
CPU0 CPU1
---- ----
lock(&ocfs2_quota_ip_alloc_sem_key);
lock(&dquot->dq_lock);
lock(&ocfs2_quota_ip_alloc_sem_key);
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
Following are the code paths for above scenarios:
path_openat
ocfs2_create
ocfs2_mknod
+ ocfs2_reserve_new_inode
| ocfs2_reserve_suballoc_bits
| inode_lock(alloc_inode) //C0: hold INODE_ALLOC_SYSTEM_INODE
| //ocfs2_free_alloc_context(inode_ac) is called at the end of
| //caller ocfs2_mknod to handle the release
|
+ ocfs2_get_init_inode
__dquot_initialize
dqget
ocfs2_acquire_dquot
+ ocfs2_lock_global_qf
| down_write(&OCFS2_I(oinfo->dqi_gqinode)->ip_alloc_sem)//A2:grabbing
+ ocfs2_create_local_dquot
down_write(&OCFS2_I(lqinode)->ip_alloc_sem)//A3:grabbing
evict
ocfs2_evict_inode
ocfs2_delete_inode
ocfs2_wipe_inode
+ inode_lock(orphan_dir_inode) //B0:hold
+ ...
+ ocfs2_remove_inode
inode_lock(inode_alloc_inode) //INODE_ALLOC_SYSTEM_INODE
down_write(&inode->i_rwsem) //C1:grabbing
generic_file_direct_write
ocfs2_direct_IO
__blockdev_direct_IO
dio_complete
ocfs2_dio_end_io
ocfs2_dio_end_io_write
+ down_write(&oi->ip_alloc_sem) //A0:hold
+ ocfs2_del_inode_from_orphan
inode_lock(orphan_dir_inode) //B1:grabbing
Root cause for the circular locking:
DIO completion path:
holds oi->ip_alloc_sem and is trying to acquire the orphan_dir_inode lock.
evict path:
holds the orphan_dir_inode lock and is trying to acquire the
inode_alloc_inode lock.
ocfs2_mknod path:
Holds the inode_alloc_inode lock (to allocate a new quota file) and is
blocked waiting for oi->ip_alloc_sem in ocfs2_acquire_dquot().
How to fix:
Replace down_write() with down_write_trylock() in ocfs2_acquire_dquot().
If acquiring oi->ip_alloc_sem fails, return -EBUSY to abort the file
creation routine and break the deadlock.
Link: https://lkml.kernel.org/r/20260302061707.7092-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reported-by: syzbot+78359d5fbb04318c35e9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=78359d5fbb04318c35e9
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for the ** glob operator in MAINTAINERS F: and X: patterns,
matching any number of path components (like Python's ** glob).
The existing * to .* conversion with slash-count check is preserved. **
is converted to (?:.*), a non-capturing group used as a marker to bypass
the slash-count check in file_match_pattern(), allowing the pattern to
cross directory boundaries.
This enables patterns like F: **/*[_-]kunit*.c to match files at any depth
in the tree.
Link: https://lkml.kernel.org/r/20260302103822.77343-1-teknoraver@meta.com
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace sprintf() with sysfs_emit() in sysfs show functions. sysfs_emit()
is preferred for formatting sysfs output because it provides safer bounds
checking. No functional changes.
Link: https://lkml.kernel.org/r/20260301125106.911980-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the implicit 'bool' to 'int' conversion with an explicit ternary
operator. This makes the pointer arithmetic clearer and avoids relying on
boolean memory representation for logic flow.
Link: https://lkml.kernel.org/r/20260301203845.2617217-1-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using bitwise OR (|=) on a boolean variable is valid C, but replacing it
with a direct logical assignment makes the intent clearer and appeases
strict static analysis tools.
Link: https://lkml.kernel.org/r/20260301152143.2572137-2-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Include <linux/export.h> explicitly instead of relying on it being
implicitly included by <linux/module.h> for the EXPORT_SYMBOL macro.
Link: https://lkml.kernel.org/r/20260301152143.2572137-1-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a missing article ('a') in the comment describing the glob
implementation, and replace 'blacklists' with 'denylists' to align with
the kernel's inclusive terminology guidelines.
Link: https://lkml.kernel.org/r/20260301154553.2592681-1-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The fchmodat2 test program open codes a version of ksft_finished(), use
the standard version.
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-2-a6419435f2e8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/fchmodat2: Error handling and general", v4.
I looked at the fchmodat2() tests since I've been experiencing some random
intermittent segfaults with them in my test systems, while doing so I
noticed these two issues. Unfortunately I didn't figure out the original
yet, unless I managed to fix it unwittingly.
This patch (of 2):
The fchmodat2() test program creates a temporary directory with a file and
a symlink for every test it runs but never cleans these up, resulting in
${TMPDIR} getting left with stale files after every run. Restructure the
program a bit to ensure that we clean these up, this is more invasive than
it might otherwise be due to the extensive use of ksft_exit_fail_msg() in
the program.
As a side effect this also ensures that we report a consistent test name
for the tests and always try both tests even if they are skipped.
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-0-a6419435f2e8@kernel.org
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-1-a6419435f2e8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add the missing dual MIT/GPL license identifier to glob.c.
Link: https://lkml.kernel.org/r/20260228195300.2468310-1-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both copy_process() and alloc_pid() do the same PIDNS_ADDING check. The
reasons for these checks, and the fact that both are necessary, are not
immediately obvious. Add the comments.
Link: https://lkml.kernel.org/r/aaGIRElc78U4Er42@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "pid: make sub-init creation retryable".
This patch (of 2):
Currently we allow only one attempt to create init in a new namespace. If
the first fork() fails after alloc_pid() succeeds, free_pid() clears
PIDNS_ADDING and thus disables further PID allocations.
Nowadays this looks like an unnecessary limitation. The original reason
to handle "case PIDNS_ADDING" in free_pid() is gone, most probably after
commit 69879c01a0 ("proc: Remove the now unnecessary internal mount of
proc").
Change free_pid() to keep ns->pid_allocated == PIDNS_ADDING, and change
alloc_pid() to reset the cursor early, right after taking pidmap_lock.
Test-case:
#define _GNU_SOURCE
#include <linux/sched.h>
#include <sys/syscall.h>
#include <sys/wait.h>
#include <assert.h>
#include <sched.h>
#include <errno.h>
int main(void)
{
struct clone_args args = {
.exit_signal = SIGCHLD,
.flags = CLONE_PIDFD,
.pidfd = 0,
};
unsigned long pidfd;
int pid;
assert(unshare(CLONE_NEWPID) == 0);
pid = syscall(__NR_clone3, &args, sizeof(args));
assert(pid == -1 && errno == EFAULT);
args.pidfd = (unsigned long)&pidfd;
pid = syscall(__NR_clone3, &args, sizeof(args));
if (pid)
assert(pid > 0 && wait(NULL) == pid);
else
assert(getpid() == 1);
return 0;
}
Link: https://lkml.kernel.org/r/aaGHu3ixbw9Y7kFj@redhat.com
Link: https://lkml.kernel.org/r/aaGIHa7vGdwhEc_D@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function read_key_from_user_keying() is missing an 'r' in its name.
Fix the typo by renaming it to read_key_from_user_keyring().
Link: https://lkml.kernel.org/r/20260227230422.859423-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'key_count' is an 'unsigned int' and cannot be less than zero. Remove
the redundant condition.
Link: https://lkml.kernel.org/r/20260228085136.861971-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace simple_strtoul() with the recommended kstrtoul() for parsing the
'coredump_filter=' boot parameter.
Check the return value of kstrtoul() and reject invalid values. This adds
error handling while preserving behavior for existing values, and removes
use of the deprecated simple_strtoul() helper. The current code silently
sets 'default_dump_filter = 0' if parsing fails, instead of leaving the
default value (MMF_DUMP_FILTER_DEFAULT) unchanged.
Rename the static variable 'default_dump_filter' to 'coredump_filter'
since it does not necessarily contain the default value and the current
name can be misleading.
Link: https://lkml.kernel.org/r/20251215142152.4082-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "(signal->core_state || !(signal->flags & SIGNAL_GROUP_EXIT))" check
in complete_signal() is not obvious at all, and in fact it only adds
unnecessary confusion: this condition is always true.
prepare_signal() does:
if (signal->flags & SIGNAL_GROUP_EXIT) {
if (signal->core_state)
return sig == SIGKILL;
/*
* The process is in the middle of dying, drop the signal.
*/
return false;
}
This means that "!signal->core_state && (signal->flags &
SIGNAL_GROUP_EXIT)" in complete_signal() is never possible.
If SIGNAL_GROUP_EXIT is set, prepare_signal() can only return true if
signal->core_state is not NULL.
Link: https://lkml.kernel.org/r/aZsfkDhnqJ4s1oTs@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc; Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thread_group_empty(tsk) is only possible if tsk is a group leader, and
thread_group_empty() already does the thread_group_leader() check.
So it makes no sense to check "thread_group_leader() &&
thread_group_empty()"; thread_group_empty() alone is enough.
Link: https://lkml.kernel.org/r/aZsfeegKZPZZszJh@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc; Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
msgque kselftest uses msgrcv(..., MSG_COPY) to copy messages. When the
kernel is built without CONFIG_CHECKPOINT_RESTORE, prepare_copy() is
stubbed out and msgrcv() returns -ENOSYS. The test currently reports this
as a failure even though it is simply a missing feature/configuration.
Skip the test when msgrcv() fails with ENOSYS.
Link: https://lkml.kernel.org/r/20260210135359.178636-1-jouyeol8739@gmail.com
Signed-off-by: UYeol Jo <jouyeol8739@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Easier to add new entries. It was sorted when added in 66b47b4a9d, but
later got wrong order for few entries. Sorted with en_US.UTF-8 locale.
Link: https://lkml.kernel.org/r/20260212144005.45052-1-pvorel@suse.cz
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Cc: Jonathan Camerom <Jonathan.Cameron@huawei.com>
Cc: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
However there's a convention of assuming that __init-time allocations
cannot fail. Because if a kmalloc() were to fail at this time, the kernel
is hopelessly messed up anyway. So simply panic() if that kmalloc failed,
then make that 350-byte buffer __initdata.
Link: https://lkml.kernel.org/r/20260223035914.4033-1-rioo.tsukatsukii@gmail.com
Signed-off-by: Rio <rioo.tsukatsukii@gmail.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Wang Jinchao <wangjinchao600@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The buffer used to hold the taint string is statically allocated, which
requires updating whenever a new taint flag is added.
Instead, allocate the exact required length at boot once the allocator is
available in an init function. The allocation sums the string lengths in
taint_flags[], along with space for separators and formatting.
print_tainted() is switched to use this dynamically allocated buffer.
If allocation fails, print_tainted() warns about the failure and continues
to use the original static buffer as a fallback.
Link: https://lkml.kernel.org/r/20260222140804.22225-1-rioo.tsukatsukii@gmail.com
Signed-off-by: Rio <rioo.tsukatsukii@gmail.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Wang Jinchao <wangjinchao600@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The verbose 'Tainted: ...' string in print_tainted_seq can total to 327
characters while the buffer defined in _print_tainted is 320 bytes.
Increase its size to 350 characters to hold all flags, along with some
headroom.
[akpm@linux-foundation.org: fix spello, add comment]
Link: https://lkml.kernel.org/r/20260220151500.13585-1-rioo.tsukatsukii@gmail.com
Signed-off-by: Rio <rioo.tsukatsukii@gmail.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Wang Jinchao <wangjinchao600@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The output of bloat-o-meter already uses the words 'old' and 'new' for
symbol size in the table header, so reflect that in the corresponding
argument names.
Link: https://lkml.kernel.org/r/20260212213941.3984330-1-vkoskiv@gmail.com
Signed-off-by: Valtteri Koskivuori <vkoskiv@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The correct passive of "to bind" is "bound", not "binded". This is often
used in the context of the BSD socket bind(2) operation.
Link: https://lkml.kernel.org/r/20260214140854.42247-1-gnoack3000@gmail.com
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
task_sig() already wraps the SigQ rlimit read in an explicit RCU read-side
critical section. Drop the stale FIXME comment and keep using
task_ucounts() for the ucounts access.
No functional change.
Link: https://lkml.kernel.org/r/20260215124511.14227-1-jaime.saguillo@gmail.com
Signed-off-by: Jaime Saguillo Revilla <jaime.saguillo@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During initialization of a VRF device, the VRF driver creates two dst
entries (for IPv4 and IPv6). They are attached to locally generated
packets that are transmitted out of the VRF ports (via the
l3mdev_l3_out() hook). Their purpose is to redirect packets towards the
VRF device instead of having the packets egress directly out of the VRF
ports. This is useful, for example, when a queuing discipline is
configured on the VRF device.
In order to avoid a NULL pointer dereference, commit b0e95ccdd7 ("net:
vrf: protect changes to private data with rcu") made the pointers to the
dst entries RCU protected. As far as I can tell, this was needed because
back then the dst entries were released (and the pointers reset to NULL)
before removing the VRF ports.
Later on, commit f630c38ef0 ("vrf: fix bug_on triggered by rx when
destroying a vrf") moved the removal of the VRF ports to the VRF
device's dellink() callback. As such, the tear down sequence of a VRF
device looks as follows:
1. VRF ports are removed.
2. VRF device is unregistered.
a. Device is closed.
b. An RCU grace period passes.
c. ndo_uninit() is called.
i. dst entries are released.
Given the above, the Tx path will always see the same fully initialized
dst entries and will never race with the ndo_uninit() callback.
Therefore, there is no need to make the pointers to the dst entries RCU
protected. Remove it as well as the unnecessary NULL checks in the Tx
path.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260326203233.1128554-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dst_dev_put() to clean up the device referenced by the dst entry
instead of partially open coding it. Internally, the helper uses the
blackhole device instead of the loopback device.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VRF driver always allocates an IPv4 dst entry for a VRF device and
prevents the device from being registered if the allocation fails.
Therefore, there is no need to check if the entry exists when tearing
down a VRF device. Remove the check.
Note that the same is not true for the IPv6 dst entry. Its creation can
be skipped if IPv6 is administratively disabled (i.e.,
'ipv6.disable=1').
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Laurent Pinchart says:
====================
net: stmmac: Disable EEE on i.MX
This small patch series fixes a long-standing interrupt storm issue with
stmmac on NXP i.MX platforms.
The initial attempt to fix^Wwork around the problem in DT ([1]) was
painfully but rightfully rejected by Russell, who helped me investigate
the issue in depth. It turned out that the root cause is a mistake in
how interrupts are wired in the SoC, a hardware bug that has been
replicated in all i.MX SoCs that integrate an stmmac. The only viable
solution is to disable EEE on those devices.
Individual patches explain the issue in more details. Patch 1/2,
authored by Russell, adds a new STMMAC_FLAG to disable EEE, and patch
2/2 sets the flag for i.MX platforms.
[1] https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
====================
Link: https://patch.msgid.link/20260325210003.2752013-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i.MX8MP suffers from an interrupt storm related to the stmmac and
EEE. A long and tedious analysis ([1]) concluded that the SoC wires the
stmmac lpi_intr_o signal to an OR gate along with the main dwmac
interrupts, which causes an interrupt storm for two reasons.
First, there's a race condition due to the interrupt deassertion being
synchronous to the RX clock domain:
- When the PHY exits LPI mode, it restarts generating the RX clock
(clk_rx_i input signal to the GMAC).
- The MAC detects exit from LPI, and asserts lpi_intr_o. This triggers
the ENET_EQOS interrupt.
- Before the CPU has time to process the interrupt, the PHY enters LPI
mode again, and stops generating the RX clock.
- The CPU processes the interrupt and reads the GMAC4_LPI_CTRL_STATUS
registers. This does not clear lpi_intr_o as there's no clk_rx_i.
An attempt was made to fixing the issue by not stopping RX_CLK in Rx LPI
state ([2]). This alleviates the symptoms but doesn't fix the issue.
Since lpi_intr_o takes four RX_CLK cycles to clear, an interrupt storm
can still occur during that window. In 1000T mode this is harder to
notice, but slower receive clocks cause hundreds to thousands of
spurious interrupts.
Fix the issue by disabling EEE completely on i.MX8MP.
[1] https://lore.kernel.org/all/20251026122905.29028-1-laurent.pinchart@ideasonboard.com/
[2] https://lore.kernel.org/all/20251123053518.8478-1-laurent.pinchart@ideasonboard.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260325210003.2752013-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms have problems when EEE is enabled, and thus need a way
to disable stmmac EEE support. Add a flag before the other LPI related
flags which tells stmmac to avoid populating the phylink LPI
capabilities, which causes phylink to call phy_disable_eee() for any
PHY that is attached to the affected phylink instance.
iMX8MP is an example - the lpi_intr_o signal is wired to an OR gate
along with the main dwmac interrupts. Since lpi_intr_o is synchronous
to the receive clock domain, and takes four clock cycles to clear, this
leads to interrupt storms as the interrupt remains asserted for some
time after the LPI control and status register is read.
This problem becomes worse when the receive clock from the PHY stops
when the receive path enters LPI state - which means that lpi_intr_o
can not deassert until the clock restarts. Since the LPI state of the
receive path depends on the link partner, this is out of our control.
We could disable RX clock stop at the PHY, but that doesn't get around
the slow-to-deassert lpi_intr_o mentioned in the above paragraph.
Previously, iMX8MP worked around this by disabling gigabit EEE, but
this is insufficient - the problem is also visible at 100M speeds,
where the receive clock is slower.
There is extensive discussion and investigation in the thread linked
below, the result of which is summarised in this commit message.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Closes: https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://patch.msgid.link/20260325210003.2752013-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
net: enetc: add more checks to enetc_set_rxfh()
ENETC only supports Toeplitz algorithm, and VFs do not support setting
the RSS key, but enetc_set_rxfh() does not check these constraints and
silently accepts unsupported configurations. This may mislead users or
tools into believing that the requested RSS settings have been
successfully applied. So add checks to reject unsupported hash functions
and RSS key updates on VFs, and return "-EOPNOTSUPP" to user space.
====================
Link: https://patch.msgid.link/20260326075233.3628047-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VFs do not have privilege to configure the RSS key because the registers
are owned by the PF. Currently, if VF attempts to configure the RSS key,
enetc_set_rxfh() simply skips the configuration and does not generate a
warning, which may mislead users into thinking the feature is supported.
To improve this situation, add a check to reject RSS key configuration
on VFs.
Fixes: d382563f54 ("enetc: Add RFS and RSS support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20260326075233.3628047-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ENETC v1 and v4 only provide Toeplitz RSS support. This patch adds
a validation check to reject attempts to configure other RSS algorithms,
avoiding misleading configuration options for users.
Fixes: d382563f54 ("enetc: Add RFS and RSS support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20260326075233.3628047-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 8110633db4 ("net: sfp-bus: allow SFP quirks to override
Autoneg and pause bits") we moved the setting of Autoneg and pause bits
before the call to SFP quirk when parsing SFP module support.
Since the quirk for Ubiquiti U-Fiber Instant SFP module zeroes the
support bits and sets 1000baseX_Full only, the above mentioned commit
changed the overall computed support from
1000baseX_Full, Autoneg, Pause, Asym_Pause
to just
1000baseX_Full.
This broke the SFP module for mvneta, which requires Autoneg for
1000baseX since commit c762b7fac1 ("net: mvneta: deny disabling
autoneg for 802.3z modes").
Fix this by setting back the Autoneg, Pause and Asym_Pause bits in the
quirk.
Fixes: 8110633db4 ("net: sfp-bus: allow SFP quirks to override Autoneg and pause bits")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260326122038.2489589-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously we stored the end of the current VMA in curr_end, and then upon
iterating to the next VMA updated curr_start to curr_end to advance to the
next VMA.
However, this doesn't take into account the fact that a VMA might be
updated due to a merge by vma_modify_flags(), which can result in curr_end
being stale and thus, upon setting curr_start to curr_end, ending up with
an incorrect curr_start on the next iteration.
Resolve the issue by setting curr_end to vma->vm_end unconditionally to
ensure this value remains updated should this occur.
While we're here, eliminate this entire class of bug by simply setting
const curr_[start/end] to be clamped to the input range and VMAs, which
also happens to simplify the logic.
Link: https://lkml.kernel.org/r/20260327173104.322405-1-ljs@kernel.org
Fixes: 6c2da14ae1 ("mm/mseal: rework mseal apply logic")
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reported-by: Antonius <antonius@bluedragonsec.com>
Closes: https://lore.kernel.org/linux-mm/CAK8a0jwWGj9-SgFk0yKFh7i8jMkwKm5b0ao9=kmXWjO54veX2g@mail.gmail.com/
Suggested-by: David Hildenbrand (ARM) <david@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
follow_pfnmap_start() suffers from two problems:
(1) We are not re-fetching the pmd/pud after taking the PTL
Therefore, we are not properly stabilizing what the lock actually
protects. If there is concurrent zapping, we would indicate to the
caller that we found an entry, however, that entry might already have
been invalidated, or contain a different PFN after taking the lock.
Properly use pmdp_get() / pudp_get() after taking the lock.
(2) pmd_leaf() / pud_leaf() are not well defined on non-present entries
pmd_leaf()/pud_leaf() could wrongly trigger on non-present entries.
There is no real guarantee that pmd_leaf()/pud_leaf() returns something
reasonable on non-present entries. Most architectures indeed either
perform a present check or make it work by smart use of flags.
However, for example loongarch checks the _PAGE_HUGE flag in pmd_leaf(),
and always sets the _PAGE_HUGE flag in __swp_entry_to_pmd(). Whereby
pmd_trans_huge() explicitly checks pmd_present(), pmd_leaf() does not do
that.
Let's check pmd_present()/pud_present() before assuming "the is a present
PMD leaf" when spotting pmd_leaf()/pud_leaf(), like other page table
handling code that traverses user page tables does.
Given that non-present PMD entries are likely rare in VM_IO|VM_PFNMAP, (1)
is likely more relevant than (2). It is questionable how often (1) would
actually trigger, but let's CC stable to be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20260323-follow_pfnmap_fix-v1-1-5b0ec10872b3@kernel.org
Fixes: 6da8e9634b ("mm: new follow_pfnmap API")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(),
damon_sysfs_upd_schemes_stats(), and
damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr.
If nr_contexts is set to 0 via sysfs while DAMON is running, these
functions dereference contexts_arr[0] and cause a NULL pointer
dereference. Add the missing check.
For example, the issue can be reproduced using DAMON sysfs interface and
DAMON user-space tool (damo) [1] like below.
$ sudo damo start --refresh_interval 1s
$ echo 0 | sudo tee \
/sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts
Link: https://patch.msgid.link/20260320163559.178101-3-objecting@objecting.org
Link: https://lkml.kernel.org/r/20260321175427.86000-4-sj@kernel.org
Link: https://github.com/damonitor/damo [1]
Fixes: d809a7c64b ("mm/damon/sysfs: implement refresh_ms file internal work")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Multiple sysfs command paths dereference contexts_arr[0] without first
verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to
0 via sysfs while DAMON is running, causing NULL pointer dereferences.
In more detail, the issue can be triggered by privileged users like
below.
First, start DAMON and make contexts directory empty
(kdamond->contexts->nr == 0).
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/nr_contexts
Then, each of below commands will cause the NULL pointer dereference.
# echo update_schemes_stats > state
# echo update_schemes_tried_regions > state
# echo update_schemes_tried_bytes > state
# echo update_schemes_effective_quotas > state
# echo update_tuned_intervals > state
Guard all commands (except OFF) at the entry point of
damon_sysfs_handle_cmd().
Link: https://lkml.kernel.org/r/20260321175427.86000-3-sj@kernel.org
Fixes: 0ac32b8aff ("mm/damon/sysfs: support DAMOS stats")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning.
Link: https://lkml.kernel.org/r/20260321175427.86000-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260321175427.86000-2-sj@kernel.org
Fixes: f0c5118ebb ("mm/damon/sysfs: catch commit test ctx alloc failure")
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The swap readahead path was recently refactored and while doing this, the
order between the charging of the folio in the memcg and the addition of
the folio in the swap cache was inverted.
Since the accounting of the folio is done while adding the folio to the
swap cache and the folio is not charged in the memcg yet, the accounting
is then done at the node level, which is wrong.
Fix this by charging the folio in the memcg before adding it to the swap cache.
Link: https://lkml.kernel.org/r/20260320050601.1833108-1-alex@ghiti.fr
Fixes: 2732acda82 ("mm, swap: use swap cache as the swap in synchronize layer")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kairui Song <kasong@tencent.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a2034 ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f1985 ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mana_gd_ring_doorbell() accesses offsets up to DOORBELL_OFFSET_EQ
(0xFF8) + 8 bytes = 4KB within each doorbell page. A db_page_size
smaller than SZ_4K is fundamentally incompatible with the driver:
doorbell pages would overlap and the device cannot function correctly.
Validate db_page_size at the source and fail the
probe early if the value is below SZ_4K. This ensures the doorbell ID
range check in mana_gd_register_device() can rely on db_page_size
being valid.
Fixes: 89fe91c659 ("net: mana: hardening: Validate doorbell ID from GDMA_REGISTER_DEVICE response")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260325180423.1923060-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
