For Tegra devices, only a subset of IO pads can be configured for 1.8V
or 3.3V. Therefore, in the 'tegra_io_pad_soc' structure for Tegra SoCs
either all or most of the 'voltage' entries are set to UINT_MAX to
indicate the IO pad voltage cannot be configured. So for the majority of
IO pads this configuration is not applicable. However, refactoring the
IO pad data to move this parameter into a separate structure does not
make sense because the benefits are marginal.
Support for the Tegra264 IO pads is currently missing and the control
for configuring the voltage for the IO pads for Tegra264 has changed.
Instead of having a single register that is used for setting the IO pad
voltage for all IO pads, there is now a register associated with the
specific IO pad. For Tegra264, there is now only one IO pad that can be
configured for 1.8V or 3.3V which is the sdmmc1-hv. While we could make
this work with by adding a new SoC flag, the implementation will be a
bit cumbersome. Therefore, it now seems reasonable to refactor the IO
pad code. Hence, introduce a new 'tegra_io_pad_vctrl' structure that
contains the register offset and bit for enabling/disabling 3.3V mode
and move the existing voltage control data for supported SoCs to this
structure. This has an added benefit of simplifying the code in the
functions tegra_io_pad_get_voltage and tegra_io_pad_set_voltage.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the various wake events for the Tegra264 device.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For Tegra264, some of the AOWAKE registers have different register
offsets. Prepare for adding the Tegra264 AOWAKE register by moving the
offsets for the AOWAKE registers that are different for Tegra264 into
the 'tegra_pmc_regs' structure and populate these offsets for the SoCs
that support these registers.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For Tegra264, the offsets for the AOWAKE registers have changed. Before
adding support for the Tegra264 AOWAKE register offsets, remove the
unused AOWAKE definitions.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit e6d96073af ("soc/tegra: pmc: Fix unsafe generic_handle_irq()
call") added the variables 'wake_work' and 'wake_status' to the
'tegra_pmc' structure but did not add the associated kerneldoc for these
new variables. Add the kerneldoc for these variables.
Fixes: e6d96073af ("soc/tegra: pmc: Fix unsafe generic_handle_irq() call")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 70f752ebb0 ("soc/tegra: pmc: Add PMC contextual functions")
added the functions devm_tegra_pmc_get() and
tegra_pmc_io_pad_power_enable(), but the names of the functions in the
associated kerneldoc is incorrect. Update the kerneldoc for these
functions to correct their names.
Fixes: 70f752ebb0 ("soc/tegra: pmc: Add PMC contextual functions")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 48b7f802fb ("soc/tegra: pmc: Embed reboot notifier in PMC
context") added the reboot_notifier structure to the PMC SoC structure
but did not update the kerneldoc accordingly. Add this missing kerneldoc
description to fix this.
Fixes: 48b7f802fb ("soc/tegra: pmc: Embed reboot notifier in PMC context")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Determine the Tegra114 hardware version using the SoC Speedo ID bit macro,
mirroring the approach already used for Tegra30 and Tegra124.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable core domain support for Tegra114 since now it has power domains
fully configured.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As of d64c732dfc ("net: rfkill: gpio: add DT support") rfkill-gpio
device can be instantiated via device tree.
Add the declaration there and drop board-paz00.c file and relevant
Makefile fragments.
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Before commit f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points.
Fixes: f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP")
Cc: stable@kernel.org
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 56e62a7370 ("s390: convert to generic entry")
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/2026032404-sterling-swoosh-43e6@gregkh
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All ASUS Transformers have micro-HDMI connector directly available.
After Tegra HDMI got bridge/connector support, we should use connector
framework for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are two core fixes here. One is from Johan dealing with an issue
introduced by a devm_ API usage update causing things to be freed
earlier than they had earlier when we fail to register a device, another
from Danilo avoids unlocked acccess to data by converting to use a
driver core API.
We also have a few relatively minor driver specific fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnG0MUACgkQJNaLcl1U
h9BsrAf9H6Wj8EU/xkrHXl+trqY46+Fniloxp9Ar2aezYZXotnFL25JmAxyk5oYK
HMHV677Xo+rcp9z77yr3vGyYFhiccioGm4t5kblIZxfwvxcuWj2r2d2KGF0jCBna
qr3IfEowlgFW6BDfL72tZbuLrjkfmIAA2IMXOlZdHGz/QswNnOjPbbDRsyKn19xF
a/CgVRyyAdAJxlv+p8/o7GbAMqJGStZ/w6Thk0GbLHASQE8Po1pTARGh7UbrJLVS
hGEOM828PG8dctDbtE5Cg1mUm4rKIvtDlcZNLArSwPGfLcWei9AK++wfDck/ANho
eRu8Zyr7yew00w+HLEssvyiSgS0HrA==
=/ogD
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are two core fixes here. One is from Johan dealing with an issue
introduced by a devm_ API usage update causing things to be freed
earlier than they had earlier when we fail to register a device,
another from Danilo avoids unlocked acccess to data by converting to
use a driver core API.
We also have a few relatively minor driver specific fixes"
* tag 'spi-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
spi: fix use-after-free on managed registration failure
spi: use generic driver_override infrastructure
spi: meson-spicc: Fix double-put in remove path
spi: sn-f-ospi: Use devm_mutex_init() to simplify code
spi: sn-f-ospi: Fix resource leak in f_ospi_probe()
A fix from Alice for the rust bindings, they didn't handle the stub
implementation of the C API used when CONFIG_REGULATOR is disabled
leading to undefined behaviour.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnGytAACgkQJNaLcl1U
h9AVigf+Mh0lmITiHVfl799msXUT3Is5mc6WevhTF2OOpIClznAiTp1GAj7YbJWo
fZee+ovNgRUhvx0XqYaGzuTkbQw3JkHFmmiXjkKa5wcWOPkyFnFNt20e56X7A+5f
Ep0eN8gH3JEJbDU10m+12xNocYmTcuuU4fFbSj8qAHmSHCV2ZM39E0xuadIBPKS0
UvlTFI0aAxNA6rjlKzf5wLGZif5/Es+JjP6JX6xhmJmYrUXzi9FNcYLZQmdSPQOO
NI9IifNooXo7zmYNS9zHg9YRSZHt6G+vtxxlpeRwnrTrkfG0/rXuGq2Bb14zm2jy
1Uv7wfo/zQ0CLVIne4wZ+HWJU7hkcw==
=Lie6
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix from Alice for the rust bindings, they didn't handle the stub
implementation of the C API used when CONFIG_REGULATOR is disabled
leading to undefined behaviour"
* tag 'regulator-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
rust: regulator: do not assume that regulator_get() returns non-null
A fix from Andy Shevchenko for an issue with caching of page selector
registers which are located inside the page they are switching.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnGzFoACgkQJNaLcl1U
h9CIHgf9EUlo+kHud/8a2NPDZAQK9OHpfEGd5vHGemd9H2NUbKuq3wwHYSaKdF4x
W+71HKr5GBIOG5hdmpQ2eynKtNdsvmLaTvjOtO4W8eJzI7hFR0I+O4dWEnJe5My9
tHciXphh515LXud7h5qGX04QZSzD0NzntVxDJyGGmLtSwQwJjIIi6mqCzPY1BJ9h
+adQNYqj9DXM9EVSsRsYhcxc64QzyXK4ThW6/BNOEVGTuBOKv6AjnoDvEG8xVg+L
/8Af01CwLS8vqlVl8nd9TyJOuIGW2GoeYjxkbvsRwEapF/bcnPyPU3fnEb653dxm
H9tAsSrrUJ2Y+rzZpZdXmPyuJvD4SQ==
=/tG2
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix from Andy Shevchenko for an issue with caching of page selector
registers which are located inside the page they are switching"
* tag 'regmap-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Synchronize cache for the page selector
Commit
cbe37a4d2b ("ASoC: Intel: avs: Configure basefw on TGL-based platforms")
includes the main CPUID header from within a C function. This works by
luck and forbids valid refactoring inside that header.
Include the CPUID header at file scope instead.
Remove the COMPILE_TEST build flag so that the CONFIG_X86 conditionals can
be removed. The driver gets enough compilation testing already on x86.
For clarity, refactor the CPUID(0x15) code into its own function without
changing any of the driver's logic.
Fixes: cbe37a4d2b ("ASoC: Intel: avs: Configure basefw on TGL-based platforms")
Suggested-by: Borislav Petkov <bp@alien8.de> # CONFIG_X86 removal
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/all/20250612234010.572636-3-darwi@linutronix.de
The Intel AVS driver queries CPUID(0x15) before checking if the CPUID leaf
is available. Check the maximum-valid CPU standard leaf beforehand.
Use the CPUID_LEAF_TSC macro instead of the custom local one for the
CPUID(0x15) leaf number.
Fixes: cbe37a4d2b ("ASoC: Intel: avs: Configure basefw on TGL-based platforms")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260327021645.555257-2-darwi@linutronix.de
- Fix a VMM controlled buffer length used to emit TDX attestation
reports.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCacbmXAAKCRDfioYZHlFs
Z872AQD1diBs3l1WGvD6WOADu6dLbjv4Mb0G6QVSaLIcLa7ISwD/R9ndVx3GzYXX
70VoCbdZdh+T13qfSZdRVT42Eh4iuAI=
=zAIN
-----END PGP SIGNATURE-----
Merge tag 'tsm-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull tsm fix from Dan Williams:
- Fix a VMM controlled buffer length used to emit TDX attestation
reports
* tag 'tsm-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Fix a potential buffer overrun issue introduced by the preceding fix for
EFI boot services region reservations on x86
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCacFhTgAKCRAwbglWLn0t
XDRBAP9WdbDUIM/ucLDFlr9hpokd+JSOS/vNgRFZaBhkjjasOAEAvdxOeShZlYWH
CVaW0D1TZuyvuUlGP6Tqqa8lBeoPVAc=
=y//h
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Fix a potential buffer overrun issue introduced by the previous fix
for EFI boot services region reservations on x86"
* tag 'efi-fixes-for-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: efi_unmap_boot_services: fix calculation of ranges_to_free size
-----BEGIN PGP SIGNATURE-----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=ldfF
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.0-20260327' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
"Just two small fixes, both fixing regressions added in the fdinfo code
in 6.19 with the SQE mixed size support"
* tag 'io_uring-7.0-20260327' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
io_uring/fdinfo: fix SQE_MIXED SQE displaying
Adjust KVM's sanity check against overwriting a shadow-present SPTE with a
another SPTE with a different target PFN to only apply to direct MMUs,
i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM
to overwrite a shadow-present SPTE in response to a guest write, writes
from outside the scope of KVM, e.g. from host userspace, aren't detected
by KVM's write tracking and so can break KVM's shadow paging rules.
------------[ cut here ]------------
pfn != spte_to_pfn(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm]
Call Trace:
<TASK>
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 11d4517511 ("KVM: x86/mmu: Warn if PFN changes on shadow-present SPTE in shadow MMU")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6b was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]---
Reported-by: Alexander Bulekov <bkov@amazon.com>
Debugged-by: Alexander Bulekov <bkov@amazon.com>
Suggested-by: Fred Griffoul <fgriffo@amazon.co.uk>
Fixes: a54aa15c6b ("KVM: x86/mmu: Handle MMIO SPTEs directly in mmu_set_spte()")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Lots of small and not-so-small fixes for the newly rewritten gmap,
mostly affecting the handling of nested guests.
-----BEGIN PGP SIGNATURE-----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=AbMd
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-7.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: More memory management fixes
Lots of small and not-so-small fixes for the newly rewritten gmap,
mostly affecting the handling of nested guests.
Can Guo <can.guo@oss.qualcomm.com> says:
Hi,
The UFS v5.0 and UFSHCI v5.0 standards have published, introducing support
for HS-G6 (46.6 Gbps per lane) through the new UniPro V3.0 interconnect
layer and M-PHY V6.0 physical layer specifications. To achieve reliable
operation at these higher speeds, UniPro V3.0 introduces TX Equalization
and Pre-Coding mechanisms that are essential for signal integrity.
This patch series implements TX Equalization support in the UFS core
driver as specified in UFSHCI v5.0, along with the necessary vendor
operations and a reference implementation for Qualcomm UFS host
controllers.
Background
==========
TX Equalization is a signal conditioning technique that compensates for
channel impairments at high data rates (HS-G4 through HS-G6). It works
by adjusting two key parameters:
- PreShoot: Pre-emphasis applied before the main signal transition
- DeEmphasis: De-emphasis applied after the main signal transition
UniPro V3.0 defines TX Equalization Training (EQTR) procedure to
automatically discover optimal TX Equalization settings. The EQTR
procedure:
1. Starts from the most reliable link state (HS-G1)
2. Iterates through all possible PreShoot and DeEmphasis combinations
3. Evaluates signal quality using Figure of Merit (FOM) measurements
4. Selects the best settings for both host and device TX lanes
For HS-G6, Pre-Coding is also introduced to further improve signal
quality. Pre-Coding must be enabled on both transmitter and receiver
when the RX_FOM indicates it is required.
Implementation Overview
=======================
The implementation follows the UFSHCI v5.0 specification and consists of:
Core Infrastructure (Patches 1-6):
- New vops callback negotiate_pwr_mode() to allow vendors to negotiate
power mode parameters before applying TX Equalization settings
- Support for HS-G6 gear enumeration
- Complete TX EQTR procedure implementation in ufs-txeq.c
- Debugfs interface for TX Equalization parameter inspection and manual
retraining
- Module parameters for adaptive TX Equalization control
Qualcomm Implementation (Patches 7-11):
- PHY-specific configurations for TX EQTR procedure
- Vendor-specific FOM measurement support
- TX Equalization settings application
- Enable TX Equalization for HW version 0x7 and onwards
The implementation is designed to be vendor-agnostic, with platform-
specific details handled through the vops callbacks. Other vendors can
add support by implementing the three new vops:
- tx_eqtr_notify(): Called before/after TX EQTR for vendor setup
- apply_tx_eqtr_settings(): Apply vendor-specific PHY configurations
- get_rx_fom(): Retrieve vendor-specific FOM measurements if needed
Module Parameters
=================
The implementation provides several module parameters for flexibility:
- use_adaptive_txeq: Enable/disable adaptive TX Equalization (default: false)
- adaptive_txeq_gear: Minimum gear for adaptive TX EQ (default: HS-G6)
- use_txeq_presets: Use only the 8 standaird presets (default: false)
- txeq_presets_selected[]: Select specific presets for EQTR
Testing
=======
This patch series has been tested on Qualcomm platforms with UFS 5.0
devices, validating:
- Successful TX EQTR completion for HS-G6
- Proper FOM evaluation and optimal settings selection
- Pre-Coding enablement for HS-G6
- Power mode changes with TX Equalization settings applied
- Report of TX Equalization settings via debugfs entries
- Report of TX EQTR histories via debug entries (see next section)
- Re-training TX Equalization via debugfs entry
Example of TX EQTR history
==========================
Device TX EQTR record summary -
Target Power Mode: HS-G6, Rate-B
Most recent record index: 2
Most recent record timestamp: 219573378 us
TX Lane 0 FOM - PreShoot\DeEmphasis
\ 0 1 2 3 4 5 6 7
0 50 70 65 - - - - x
1 x x x x x x x x
2 100 90 70 - - - - x
3 x x x x x x x x
4 95 90 - - - - - x
5 - - - - - - - x
6 x x x x x x x x
7 x x x x x x x x
TX Lane 1 FOM - PreShoot\DeEmphasis
\ 0 1 2 3 4 5 6 7
0 50 70 60 - - - - x
1 x x x x x x x x
2 100 80 65 - - - - x
3 x x x x x x x x
4 95 85 - - - - - x
5 - - - - - - - x
6 x x x x x x x x
7 x x x x x x x x
Patch Structure
===============
Patches 1-3: Preparatory changes for power mode negotiation and HS-G6
Patch 4: Core TX Equalization and EQTR implementation
Patches 5-7: Debugfs support for TX Equalization
Patches 8-12: Qualcomm vendor implementation
Next
====
One more series has been developed to enhance TX Equalization support,
which will be submitted for review after this series is accepted:
- Provide board specific (static) TX Equalization settings from DTS
- Parse static TX Equalization settings from DTS if provided
- Apply static TX Equalization settings if use_adaptive_txeq is disabled
- Add support for UFS v5.0 attributes qTxEQGnSettings & wTxEQGnSettingsExt
- Enable persistent storage and retrieval of optimal TX Equalization settings
Link: https://patch.msgid.link/20260325152154.1604082-1-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The rpl_s_cfg variable is only used within this file, so mark it static, as
Sparse reports:
drivers/edac/ie31200_edac.c:709:19: warning: symbol 'rpl_s_cfg' was not
declared. Should it be static?
[ bp: Massage commit message. ]
Signed-off-by: Marilene Andrade Garcia <marilene.agarcia@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/f353c3aff47abd88bafc46a1c0c5eb9917e11b28.1774619301.git.marilene.agarcia@gmail.com
Enable TX Equalization for hosts with HW version 0x7 and onwards.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-13-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, when Host Software triggers TX Equalization Training, HW
does not take TX EQTR settings programmed in PA_TxEQTRSetting, instead HW
takes TX EQTR settings from PA_TxEQG1Setting. Implement vops
apply_tx_eqtr_setting() to work around it by programming TX EQTR settings
to PA_TxEQG1Setting during TX EQTR procedure.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-12-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, host's M-PHY RX_FOM Attribute always reads 0, meaning SW
cannot rely on Figure of Merit (FOM) to identify the optimal TX
Equalization settings for device's TX Lanes. Implement the vops
ufs_qcom_get_rx_fom() such that SW can utilize the UFS Eye Opening Monitor
(EOM) to evaluate the TX Equalization settings for device's TX Lanes.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-11-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, HW does not support triggering TX EQTR from the most
reliable High-Speed (HS) Gear (HS Gear1), but only allows to trigger TX
EQTR for the target HS Gear from the same HS Gear. To work around the HW
limitation, implement vops tx_eqtr_notify() to change Power Mode to the
target TX EQTR HS Gear prior to TX EQTR procedure and change Power Mode
back to HS Gear1 (the most reliable gear) post TX EQTR procedure.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-10-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If HS-G6 Power Mode change handshake is successful and outbound data Lanes
are expected to transmit ADAPT, M-TX Lanes shall be configured as
if (Adapt Type == REFRESH)
TX_HS_ADAPT_LENGTH_L0_L1_L2_L3 = PA_PeerRxHsG6AdaptRefreshL0L1L2L3.
else if (Adapt Type == INITIAL)
TX_HS_ADAPT_LENGTH_L0_L1_L2_L3 = PA_PeerRxHsG6AdaptInitialL0L1L2L3.
On some platforms, the ADAPT_L0_L1_L2_L3 duration on Host TX Lanes is only
a half of theoretical ADAPT_L0_L1_L2_L3 duration TADAPT_L0_L1_L2_L3 (in
PAM-4 UI) calculated from TX_HS_ADAPT_LENGTH_L0_L1_L2_L3.
For such platforms, the workaround is to double the ADAPT_L0_L1_L2_L3
duration by uplifting TX_HS_ADAPT_LENGTH_L0_L1_L2_L3. UniPro initializes
TX_HS_ADAPT_LENGTH_L0_L1_L2_L3 during HS-G6 Power Mode change handshake, it
would be too late for SW to update TX_HS_ADAPT_LENGTH_L0_L1_L2_L3 post
HS-G6 Power Mode change. Update PA_PeerRxHsG6AdaptRefreshL0L1L2L3 and
PA_PeerRxHsG6AdaptInitialL0L1L2L3 post Link Startup and before HS-G6 Power
Mode change, so that the UniPro would use the updated value during HS-G6
Power Mode change handshake.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-9-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drastic environmental changes, such as significant temperature shifts, can
impact link signal integrity. In such cases, retraining TX Equalization is
necessary to compensate for these environmental changes.
Add a debugfs entry, 'tx_eq_ctrl', to allow userspace to manually trigger
the TX Equalization training (EQTR) procedure and apply the identified
optimal settings on the fly. These entries are created on a per-gear basis
for High Speed Gear 4 (HS-G4) and above, as TX EQTR is not supported for
lower gears.
The 'tx_eq_ctrl' entry currently accepts the 'retrain' command to initiate
the procedure. The interface is designed to be scalable to support
additional commands in the future.
Reading the 'tx_eq_ctrl' entry provides a usage hint to the user, ensuring
the interface is self-documenting.
The ufshcd's debugfs folder structure will look like below:
/sys/kernel/debug/ufshcd/*ufs*/
|--tx_eq_hs_gear1/
| |--device_tx_eq_params
| |--host_tx_eq_params
|--tx_eq_hs_gear2/
|--tx_eq_hs_gear3/
|--tx_eq_hs_gear4/
|--tx_eq_hs_gear5/
|--tx_eq_hs_gear6/
|--device_tx_eq_params
|--device_tx_eqtr_record
|--host_tx_eq_params
|--host_tx_eqtr_record
|--tx_eq_ctrl
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-8-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for supporting TX Equalization refreshing, introduce helper
functions to safely pause and resume command processing.
ufshcd_pause_command_processing() ensures the host is in a quiescent state
by stopping the block layer tagset, acquiring the necessary locks
(scan_mutex and clk_scaling_lock), and waiting for any in-flight commands
to complete within a specified timeout.
ufshcd_resume_command_processing() restores the host to its previous
operational state by reversing these steps in the correct order.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-7-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add debugfs support for UFS TX Equalization and UFS TX Equalization
Training (EQTR) to facilitate runtime inspection of link quality. These
entries allow developers to monitor and optimize TX Equalization parameters
and EQTR records during live operation.
The debugfs entries are organized on a per-gear basis under the HBA's
debugfs root. Since TX EQTR is only defined for High Speed Gear 4 (HS-G4)
and above, EQTR-related entries are explicitly excluded for HS-G1 through
HS-G3 to avoid exposing unsupported attributes.
The ufshcd's debugfs folder structure will look like below:
/sys/kernel/debug/ufshcd/*ufs*/
|--tx_eq_hs_gear1/
| |--device_tx_eq_params
| |--host_tx_eq_params
|--tx_eq_hs_gear2/
|--tx_eq_hs_gear3/
|--tx_eq_hs_gear4/
|--tx_eq_hs_gear5/
|--tx_eq_hs_gear6/
|--device_tx_eq_params
|--device_tx_eqtr_record
|--host_tx_eq_params
|--host_tx_eqtr_record
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-6-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MIPI Unipro3.0 introduced PA_TxEQGnSetting and PA_PreCodeEn attributes for
TX Equalization and Pre-Coding. It is Host Software's responsibility to
configure these attributes for both host and device before initiating Power
Mode Change to High-Speed Gears.
MIPI Unipro3.0 also introduced TX Equalization Training (EQTR) to identify
optimal TX Equalization settings for use by both Host's and Device's
UniPro. TX EQTR shall be initiated from the most reliable High-Speed Gear
(HS-G1) targeting High-Speed Gears (HS-G4 to HS-G6).
Implement TX Equalization configuration and TX EQTR procedure as defined
in UFSHCI v5.0 specification. The TX EQTR procedure determines the optimal
TX Equalization settings by iterating through all possible PreShoot and
DeEmphasis combinations and selecting the best combinations for both Host
and Device based on Figure of Merit (FOM) evaluation.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-5-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFS_HS_G6 to enum ufs_hs_gear_tag. In addition, add UFS_HS_GEAR_MAX to
enum ufs_hs_gear_tag to facilitate iteration over valid High Speed Gears.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-4-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, callers must manually toggle hba->force_pmc before and after
calling ufshcd_config_pwr_mode() to force a Power Mode change. Introduce
enum ufshcd_pmc_policy and refactor ufshcd_config_pwr_mode() to accept
pmc_policy as a parameter to force a Power Mode change.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-3-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most vendor specific implemenations of vops pwr_change_notify(PRE_CHANGE)
are fulfilling two things at once:
- Vendor specific target power mode negotiation
- Vendor specific power mode change preparation
When TX Equalization is added into consideration, before power mode change
to a target power mode, TX Equalization Training (EQTR) needs be done for
that target power mode. In addition, UFSHCI spec requires to start TX EQTR
from HS-G1 (the most reliable High Speed Gear).
Adding TX EQTR before pwr_change_notify(PRE_CHANGE) is not applicable
because we don't know the negotiated power mode yet.
Adding TX EQTR post pwr_change_notify(PRE_CHANGE) is inappropriate because
pwr_change_notify(PRE_CHANGE) has finished preparation for a power mode
change to negotiated power mode, yet we are changing power mode to HS-G1
for TX EQTR.
Add a new vops negotiate_pwr_mode() so that vendor specific power mode
negotiation can be fulfilled in its vendor specific implementations. Later
on, TX EQTR can be added post vops negotiate_pwr_mode() and before vops
pwr_change_notify(PRE_CHANGE).
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260325152154.1604082-2-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are multiple device mappers that set up their stacking limits
exactly the same for the logical, physical and minimum IO queue limits.
Provide a helper for it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Don't depend on the defaults to be what is desired if the integrity
device was set up with 512b sector size. Always set the queue limits to
be at least what the device mapper wants.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
A user can integritysetup a device with a backing device using a 4k
logical block size, but request the dm device use 1k or 2k. This
mismatch creates an inconsistency such that the dm device would report
limits for IO that it can't actually execute. Fix this by using the
backing device's limits if they are larger.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In hfsplus_fill_super(), the process of looking up the hidden directory
involves initializing a catalog search, building a search key, reading
the b-tree record, and releasing the search data.
Currently, this logic is open-coded directly within the main superblock
initialization routine. This makes hfsplus_fill_super() quite lengthy
and its error handling paths less straightforward.
Extract the hidden directory search sequence into a new helper function,
hfsplus_get_hidden_dir_entry(). This improves overall code readability,
cleanly encapsulates the hfs_find_data lifecycle, and simplifies the
error exits in hfsplus_fill_super().
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b:00007fff1ab55718 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffacad55eae
RDX: 000055740c64e5b0 RSI: 000055740c64e630 RDI: 000055740c651ab0
RBP: 000055740c64e380 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000055740c64e5b0 R14: 000055740c651ab0 R15: 000055740c64e380
</TASK>
After applying this patch, the warning no longer appears.
Fixes: 89ac9b4d3d ("hfsplus: fix longname handling")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Enhance the IOC shutdown process to handle transient failures during
controller cleanup. Add retry logic with configurable maximum retry
count (MPI3MR_MAX_SHUTDOWN_RETRY_COUNT) and proper timeout management
that resets on each retry attempt. This ensures shutdown can recover
from temporary issues without failing completely.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
