Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260610102021.83273-9-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the explicit mutex_lock()/mutex_unlock() pair to guard(mutex)
to simplify the locking logic and automatically release the mutex on
all exit paths.
This changes the mutex release point from immediately before dev_warn()
to automatic cleanup at scope exit. However, the affected path only emits
a warning and immediately returns -EINVAL, without any further processing.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260610102021.83273-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During randconfig testing, I came across a lot of warnings for the newly
added carryless multiplication function triggering excessive stack usage
from spilling temporary variables to the stack:
lib/crypto/gf128hash.c:166:1: error: stack frame size (1192) exceeds limit (1024) in 'polyval_mul_generic' [-Werror,-Wframe-larger-than]
In addition to the possible risk of overflowing the kernel stack,
the generated object code surely performs very poorly.
This only happens on architectures that don't provide uint128_t
(which should be all 32-bit architectures on modern compilers), but
though I tested random x86 and arm configs, I only saw this with arm's
CONFIG_THUMB2_KERNEL, which adds more pressure to the register allocator.
The testing was done using clang-22, I don't know if gcc has the same
problem. Marking clmul32() as noinline_for_stack experimentally shows
all of the affected builds to completely solve the problem, reducing
the stack usage to a few bytes as expected.
Since u64 arithmetic frequently leads to compilers badly optimizing
32-bit targets, keeping clmul32 out of line is likely to help on
other 32-bit configurations as well when they run into this problem,
though it may also result in a small performance degradation in
configurations that would benefit from inlining.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611125952.3387258-1-arnd@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts spinlock handling in the Rockchip sound drivers
to use guard() helpers.
The changes are code cleanup only and should have no functional impact.
Link: https://patch.msgid.link/20260604033554.96996-1-phucduc.bui@gmail.com
bui duc phuc <phucduc.bui@gmail.com> says:
This series reorders the runtime resume clock enable sequence in the
Rockchip SPDIF and PDM drivers to enable the bus clock before the
functional controller clock.
It also updates the SPDIF DT binding clock descriptions to match the
actual clock usage in the driver.
Additionally, this v2 adds two new patches addressing issues reported
by the Sashiko AI Review tool regarding regcache sync failure handling
and runtime PM resume status validation.
Testing:
- Patch 1: Verified (dt_binding_check passed).
- Patches 2 to 5: Compile tested only. Please help test if you have
the relevant Rockchip hardware.
Link: https://patch.msgid.link/20260602101608.45137-1-phucduc.bui@gmail.com
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260522110302.349421F000E9@smtp.kernel.org/
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If regcache_sync() fails during runtime resume, the driver disables the
clocks and returns an error. However, the regmap cache-only mode is left
disabled.
Restore cache-only mode in the error path so subsequent register accesses
continue to use the cache while the device is inactive.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260522103713.6C09D1F000E9@smtp.kernel.org/
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the 'hclk' bus clock before the 'clk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the 'hclk' bus clock before the 'mclk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the binding descriptions to match the actual clock usage, where
'mclk' is the controller clock and 'hclk' is the bus clock.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the McASP driver to support audio-graph-card2 of-graph topology,
while maintaining backwards compatibility for existing simple-audio-card
phandles and machine drivers, which now uses the default MCASP_GRAPH_NONE
code path.
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260603211835.635184-1-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings.
Fixes: 64527e8a35 ("ASoC: topology: Add FE DAIs dynamically")
Fixes: acfc7d46cd ("ASoC: topology: Add FE DAI links dynamically")
Fixes: 0038be9a84 ("ASoC: topology: Add support for configuring existing BE DAIs")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260604-asoc-topology-check-pcm-dai-names-v1-1-e1b0f6f7c2ce@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit [1] updated the core to use complete_all() which means that
the wait_for_completion() will now simply return if the device
is already attached, so skipping the completion isn't required
anymore. Update the code to simply call sdw_slave_wait_for_init()
unconditionally.
[1] c40d6b3249 ("soundwire: fix enumeration completion")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608102714.2503120-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608102714.2503120-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608102714.2503120-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it can be used for code that also doesn't check this
flag. Update the driver to use the new core helper.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently in sdw_slave_wait_for_init() the waiting can be skipped
if unattach_request is not set. Doing so was added in [1] likely
because the core used to do a complete() on the completion so
waiting in the case an unattach hadn't actually happened would
block for the full timeout. However patch [2] updated the core to
use complete_all() which means that the wait_for_completion() will
now simply return if the device is already attached skipping the
completion doesn't add much.
Additionally, unattach_request is only set if the host initiates
a bus reset. However, the host doing a bus reset is not the only
reason a device may be unattached from the bus. Other options
could include the driver probing before the device enumerates, a
sync-loss, or the device itself powering down.
Removing the skip using unattached_request, doesn't cost much in
terms of efficiency and allows the sdw_slave_wait_for_init() helper
to be used outside of runtime resume.
[1] b2bd75f806 ("soundwire: sdw_slave: track unattach_request to handle all init sequences")
[2] c40d6b3249 ("soundwire: fix enumeration completion")
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260608102714.2503120-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HyeongJun An <sammiee5311@gmail.com> says:
Some custom ASoC kcontrol put() handlers use the written enum value
(ucontrol->value.enumerated.item[0]) to index a table or compute a bit
shift before validating that the value is within the control's enum range.
An out-of-range value written from userspace is therefore consumed before
it is rejected.
This is the same class addressed for the Meson codecs in commit
1e00120680 ("ASoC: meson: g12a-tohdmitx: Validate written enum values")
and commit 3150b70e94 ("ASoC: meson: g12a-toacodec: Validate written
enum values").
Fix four more instances:
- hdac_hdmi reads e->texts[item] before validation.
- aiu converts the item before validating it.
- fsl_audmix converts the item and uses the result before validation.
- tegra210_ahub reads e->values[item] before validation.
Link: https://patch.msgid.link/20260609124317.38046-1-sammiee5311@gmail.com
tegra_ahub_put_value_enum() reads e->values[item[0]] before
checking whether item[0] is within the enum item range. The existing
check therefore happens too late to prevent an out-of-range read of the
values array.
Move the check before the array access.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260609124317.38046-5-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src()
convert the user-provided enum item with snd_soc_enum_item_to_val()
before checking whether the item is within the enum's item count.
The generic snd_soc_put_enum_double() helper performs that
validation, but these callbacks use the converted value first: the
clock-source path tests it with BIT(), and the output-source path
indexes the prms transition table with it.
Reject out-of-range enum items before converting them.
Fixes: be1df61cf0 ("ASoC: fsl: Add Audio Mixer CPU DAI driver")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260609124317.38046-4-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls.
Fixes: b82b734c0e ("ASoC: meson: aiu: add hdmi codec control support")
Fixes: 65816025d4 ("ASoC: meson: aiu: add internal dac codec control support")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260609124317.38046-3-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdac_hdmi_set_pin_port_mux() uses the written enum value to index the
texts array before calling snd_soc_dapm_put_enum_double(), which validates
that the value is within the enum item range.
An out-of-range value can therefore make the driver read past the texts
array before the helper rejects the write. Move the lookup after the helper
has accepted the value.
Fixes: 4a3478debf ("ASoC: hdac_hdmi: Add jack reporting")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260609124317.38046-2-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts spinlock handling in several IMG ASoC drivers
to use guard() helpers.
All patches are straightforward cleanups with no functional change
intended.
Compile-tested only.
Link: https://patch.msgid.link/20260610104524.87166-1-phucduc.bui@gmail.com
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20260610102153.83367-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge updates related to system sleep support, two updates of the
intel_rapl power capping driver, and a pm-graph utility fix for
7.2-rc1:
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init() to
avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during hibernation
image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression (l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the intel_rapl
power capping driver and use sysfs_emit() in cpumask_show() in that
driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)
* pm-sleep:
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: hibernate: Use flexible array for CRC uncompressed buffers
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
PM: hibernate: call preallocate_image() after freeze prepare
* pm-powercap:
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
* pm-tools:
PM: tools: pm-graph: fix ValueError when parsing incomplete device properties
When SND_SOC_SOF_INTEL_LNL is set, SND_SOF_SOF_HDA_SDW_BPT must also
be enabled, in order to let the soundwire support call into it.
However, there are configurations with SND_SOF_SOF_HDA_SDW_BPT=m
and SND_SOF_SOF_HDA_SDW_BPT=m but SOUNDWIRE_INTEL=y, which still
lead to a link failure:
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0xfc8): undefined reference to `hda_sdw_bpt_wait'
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x1ff8): undefined reference to `hda_sdw_bpt_get_buf_size_alignment'
Address this by moving the 'select SND_SOF_SOF_HDA_SDW_BPT' into
SND_SOC_SOF_HDA_GENERIC.
Fixes: 614d416dd8 ("ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611132310.137688-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_SOF_HDA_GENERIC=y but SND_SOC_SOF_INTEL_SOUNDWIRE=m, the
SND_SOC_SDW_UTILS is also set to =m even though there is a direct link
dependency from the hda.c:
aarch64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_machine_select':
hda.c:(.text+0x21ac): undefined reference to `codec_info_list'
hda.c:(.text+0x241c): undefined reference to `asoc_sdw_get_dai_type'
hda.c:(.text+0x25b4): undefined reference to `asoc_sdw_get_codec_info_list_count'
hda.c:(.text+0x25d8): undefined reference to `asoc_sdw_get_codec_info_list_count'
Change this the same way as the other related 'select' statements
to allow linking against it.
Fixes: 2b4d53eb5c ("ASoC: SOF: Intel: select SND_SOC_SDW_UTILS in SND_SOC_SOF_HDA_GENERIC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260611132310.137688-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs35l56_cal_data_debugfs_write() fix the if statement that checks for
error return to only check for negative values.
Reported by Sashiko:
simple_write_to_buffer() returns the positive number of bytes copied
on success. Since the condition returns immediately on any non-zero
value, is it possible that the written calibration data is discarded
and cs35l56_stash_calibration() is never called?
Fixes: f7097161e9 ("ASoC: cs35l56: Add common code for factory calibration")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260610093432.557375-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260611151234.1111153-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In snd_soc_bind_card() create a device_link from card to all components
to ensure correct order of system_suspend. The card is the consumer and
the components are the supplier, so that the card will system_suspend
before any of the components.
The PM core will normally system_suspend drivers in the opposite order
that they registered. This ensures children are suspended before their
parents, for example users of a bus driver should suspend before the bus
driver suspends.
For ASoC, snd_soc_suspend() shuts down any active audio, which requires
that the components are still able to communicate with their hardware.
Previously there was nothing to ensure this ordering, because there is
(usually) no relationship between a machine driver and component drivers.
If the machine driver registered before the codec drivers, the codec
drivers would be suspended before the machine driver snd_soc_suspend()
runs, so that ASoC is attempting to stop audio on a driver that has
already suspended.
Creating a device_link is safe if there is already a device_link between
those devices because of multiple components sharing the same dev.
device_link_add() kernel doc says:
"if a device link between the given @consumer and @supplier pair
exists already when this function is called for them, the existing link
will be returned regardless of its current type and status ...
The caller of this function is then expected to treat
the link as though it has just been created, so (in particular) if
DL_FLAG_STATELESS was passed in @flags, the link needs to be released
explicitly when not needed any more"
For the same reason it is safe if the codec driver or machine driver
later call device_link_add() to create a link between the same two
devices.
(I have tested creating multiple links between the card->dev and a
component->dev and did not encounter any problems with suspend/resume or
module unloading.)
The DL_FLAG_AUTOREMOVE_* flags assume that they are being called from
the probe() function of that device. This isn't guaranteed in ASoC card
binding because of deferred binding. The exact behavior and consequences
of the DL_FLAG_AUTOREMOVE_* are also unclear from the documentation.
So DL_FLAG_STATELESS is used for safety, and the links are removed
explicitly when the card unbinds or if the bind fails.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260611110856.1088110-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce sysctl knobs to allow configuring DPM watchdog timeouts at
runtime.
Currently, these timeouts are fixed at compile time via
CONFIG_DPM_WATCHDOG_TIMEOUT and CONFIG_DPM_WATCHDOG_WARNING_TIMEOUT.
This limits flexibility if the timeouts need to be adjusted for
different testing scenarios or hardware behaviors without rebuilding
the kernel.
Add the following sysctl files under /proc/sys/kernel/:
- dpm_watchdog_timeout_secs: The total timeout before panic. The
maximum value is capped at CONFIG_DPM_WATCHDOG_TIMEOUT to prevent
unreasonably large timeouts.
- dpm_watchdog_warning_timeout_secs: The warning timeout. The maximum
value is capped at the current dpm_watchdog_timeout_secs.
Both sysctls have a minimum value of 1.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260608021526.1023248-4-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A few more fixes for this release, some smaller driver specific ones
plus a final quirk.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmoq+TEACgkQJNaLcl1U
h9Dh6Af/UsCFmuhthu0qJ6kDXkr5rtetUsv3NI1ek0VrBj5MXFzPBJ664IeoExjm
9EIcBEOkMewzZWo8KuG0GZV1MO60P5z3xRBAsidwxEfzLKnLKHNtQM5lrh1RTgBJ
NU21OpEwgRQtPxFQVsCHY2TV7IxHwvlEdZ9SeikBAlBXpU1tbnm9HQN+LT3kO8m0
+vKYlfHN/q/HucmZVzOmottYSjBS3oxVXU2/QFvui6ThhyaXc9t7oU6sYYFzaYBg
WoZT+ZEoEbyKR1WBIh3FwVGpxB2wuwIefo/E22/WDUtVQ0ZxMiNxEwhjqgh+7Uo0
BVbzFBYyBSrtTqWp3AEPSStLKnPs7A==
=0BRq
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.1-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
A few more fixes for this release, some smaller driver specific ones
plus a final quirk.
Merge cpuidle updates, OPP (operating performance points) updates and a
PM QoS update for 7.2-rc1:
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
* pm-cpuidle:
intel_idle: Drop C-states redundant when PC6 is disabled
intel_idle: Introduce a helper for checking PC6
intel_idle: Add constants for MSR_PKG_CST_CONFIG_CONTROL
* pm-opp:
opp: rust: mark OPP methods as inline
OPP: of: Fix potential memory leak in opp_parse_supplies()
OPP: Fix race between OPP addition and lookup
* pm-qos:
PM: QoS: Fix misc device registration unwind
Merge cpufreq updates for 7.2:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
* pm-cpufreq: (25 commits)
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
cpufreq: clean up dead dependencies on X86 in Kconfig
cpufreq: conservative: Simplify frequency limit handling
cpufreq: Avoid redundant target() calls for unchanged limits
cpufreq: Fix typo in comment
cpufreq: intel_pstate: Sync policy->cur during CPU offline
cpufreq: Documentation: fix sampling_down_factor range
cpufreq: Fix hotplug-suspend race during reboot
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
...
set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on
the user-provided rq_wqe_shift, which is only checked to be greater than
32, so shifts of 32 are still accepted. A shift of 31 also overflows a
signed integer, leading to undefined behavior.
Use check_shl_overflow() to compute the RQ WQE size and reject any
invalid values.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://patch.msgid.link/r/20260611-maher-sec-fixes-v1-1-cd8eb2542869@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
