It's the responsibility of the DRM modeset driver to unprepare
and disable the panel. Doing so here leads to regulator underflows.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260216-mantix-shutdown-v1-1-d2e93a8ccc4c@puri.sm
This is now done by the DRM framework itself.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260215085140.20499-4-clamor95@gmail.com
Switch to use of drm_connector_helper_get_modes_fixed helper for get_modes
operation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260215085140.20499-3-clamor95@gmail.com
Rename renesas,inversion to renesas,column-inversion according to schema.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260215085140.20499-2-clamor95@gmail.com
The Avaota A1 board features 4 RGB LEDs in a string connected to the
SoC's LED controller.
Enable the LED controller and add device nodes for them. The timings
were copied from the downstream vendor DTS. The design does not specify
what these LEDs are for, nor are there any markings on the board for
them, so just use them as indicators.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260302152724.3197587-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The A523 SoC family features an LED controller that is identical to the
one found on previous SoCs.
Add a device node for it, and one of the possible pinmux settings. This
setting is used on the Avaota A1.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260302152724.3197587-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The Allwinner A523 SoC family features an identical LED controller as
found on the A100.
Add a SoC-specific compatible for it, with fallback to the A100 one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260302152724.3197587-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The hashmap__new() function never returns NULL, it returns error
pointers. Fix the error checking to match.
Additionally, set src->samples to NULL to prevent any later code from
accidentally using the error pointer.
Fixes: d3e7cad6f3 ("perf annotate: Add a hashmap for symbol histogram")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a bio goes through the rq_qos infrastructure on a path's request
queue, it gets BIO_QOS_THROTTLED or BIO_QOS_MERGED flags set. These
flags indicate that rq_qos_done_bio() should be called on completion
to update rq_qos accounting.
During path failover in nvme_failover_req(), the bio's bi_bdev is
redirected from the failed path's disk to the multipath head's disk
via bio_set_dev(). However, the BIO_QOS flags are not cleared.
When the bio eventually completes (either successfully via a new path
or with an error via bio_io_error()), rq_qos_done_bio() checks for
these flags and calls __rq_qos_done_bio(q->rq_qos, bio) where q is
obtained from the bio's current bi_bdev - which is now the multipath
head's queue, not the original path's queue.
The multipath head's queue does not have rq_qos enabled (q->rq_qos is
NULL), but the code assumes that if BIO_QOS_* flags are set, q->rq_qos
must be valid.
This breaks when a bio is moved between queues during NVMe multipath
failover, leading to a NULL pointer dereference.
Execution Context timeline :-
* =====> dd process context
[USER] dd process
[SYSCALL] write() - dd process context
submit_bio()
nvme_ns_head_submit_bio() - path selection
blk_mq_submit_bio() #### QOS FLAGS SET HERE
[USER] dd waits or returns
==== I/O in flight on NVMe hardware =====
===== End of submission path ====
------------------------------------------------------
* dd ====> Interrupt context;
[IRQ] NVMe completion interrupt
nvme_irq()
nvme_complete_rq()
nvme_failover_req() ### BIO MOVED TO HEAD
spin_lock_irqsave (atomic section)
bio_set_dev() changes bi_bdev
### BUG: QOS flags NOT cleared
kblockd_schedule_work()
* Interrupt context =====> kblockd workqueue
[WQ] kblockd workqueue - kworker process
nvme_requeue_work()
submit_bio_noacct()
nvme_ns_head_submit_bio()
nvme_find_path() returns NULL
bio_io_error()
bio_endio()
rq_qos_done_bio() ### CRASH ###
KERNEL PANIC / OOPS
Crash from blktests nvme/058 (rapid namespace remapping):
[ 1339.636033] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1339.641025] nvme nvme4: rescanning namespaces.
[ 1339.642064] #PF: supervisor read access in kernel mode
[ 1339.642067] #PF: error_code(0x0000) - not-present page
[ 1339.642070] PGD 0 P4D 0
[ 1339.642073] Oops: Oops: 0000 [#1] SMP NOPTI
[ 1339.642078] CPU: 35 UID: 0 PID: 4579 Comm: kworker/35:2H
Tainted: G O N 6.17.0-rc3nvme+ #5 PREEMPT(voluntary)
[ 1339.642084] Tainted: [O]=OOT_MODULE, [N]=TEST
[ 1339.673446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 1339.682359] Workqueue: kblockd nvme_requeue_work [nvme_core]
[ 1339.686613] RIP: 0010:__rq_qos_done_bio+0xd/0x40
[ 1339.690161] Code: 75 dd 5b 5d 41 5c c3 cc cc cc cc 66 90 90 90 90 90 90 90
90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 f5
53 48 89 fb <48> 8b 03 48 8b 40 30 48 85 c0 74 0b 48 89 ee
48 89 df ff d0 0f 1f
[ 1339.703691] RSP: 0018:ffffc900066f3c90 EFLAGS: 00010202
[ 1339.706844] RAX: ffff888148b9ef00 RBX: 0000000000000000 RCX: 0000000000000000
[ 1339.711136] RDX: 00000000000001c0 RSI: ffff8882aaab8a80 RDI: 0000000000000000
[ 1339.715691] RBP: ffff8882aaab8a80 R08: 0000000000000000 R09: 0000000000000000
[ 1339.720472] R10: 0000000000000000 R11: fefefefefefefeff R12: ffff8882aa3b6010
[ 1339.724650] R13: 0000000000000000 R14: ffff8882338bcef0 R15: ffff8882aa3b6020
[ 1339.729029] FS: 0000000000000000(0000) GS:ffff88985c0cf000(0000) knlGS:0000000000000000
[ 1339.734525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1339.738563] CR2: 0000000000000000 CR3: 0000000111045000 CR4: 0000000000350ef0
[ 1339.742750] DR0: ffffffff845ccbec DR1: ffffffff845ccbed DR2: ffffffff845ccbee
[ 1339.745630] DR3: ffffffff845ccbef DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 1339.748488] Call Trace:
[ 1339.749512] <TASK>
[ 1339.750449] bio_endio+0x71/0x2e0
[ 1339.751833] nvme_ns_head_submit_bio+0x290/0x320 [nvme_core]
[ 1339.754073] __submit_bio+0x222/0x5e0
[ 1339.755623] ? rcu_is_watching+0xd/0x40
[ 1339.757201] ? submit_bio_noacct_nocheck+0x131/0x370
[ 1339.759210] submit_bio_noacct_nocheck+0x131/0x370
[ 1339.761189] ? submit_bio_noacct+0x20/0x620
[ 1339.762849] nvme_requeue_work+0x4b/0x60 [nvme_core]
[ 1339.764828] process_one_work+0x20e/0x630
[ 1339.766528] worker_thread+0x184/0x330
[ 1339.768129] ? __pfx_worker_thread+0x10/0x10
[ 1339.769942] kthread+0x10a/0x250
[ 1339.771263] ? __pfx_kthread+0x10/0x10
[ 1339.772776] ? __pfx_kthread+0x10/0x10
[ 1339.774381] ret_from_fork+0x273/0x2e0
[ 1339.775948] ? __pfx_kthread+0x10/0x10
[ 1339.777504] ret_from_fork_asm+0x1a/0x30
[ 1339.779163] </TASK>
Fix this by clearing both BIO_QOS_THROTTLED and BIO_QOS_MERGED flags
when bios are redirected to the multipath head in nvme_failover_req().
This is consistent with the existing code that clears REQ_POLLED and
REQ_NOWAIT flags when the bio changes queues.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260226031243.87200-3-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_steal_bios() transfers bios from a request to a bio_list when the
request is requeued to a different queue. The NVMe multipath failover
path (nvme_failover_req) currently open-codes clearing of REQ_POLLED,
bi_cookie, and REQ_NOWAIT on each bio before calling blk_steal_bios().
Move these fixups into blk_steal_bios() itself so that any caller
automatically gets correct flag state when bios cross queue boundaries.
Simplify nvme_failover_req() accordingly.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260226031243.87200-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IDLETIMER revision 0 rules reuse existing timers by label and always call
mod_timer() on timer->timer.
If the label was created first by revision 1 with XT_IDLETIMER_ALARM,
the object uses alarm timer semantics and timer->timer is never initialized.
Reusing that object from revision 0 causes mod_timer() on an uninitialized
timer_list, triggering debugobjects warnings and possible panic when
panic_on_warn=1.
Fix this by rejecting revision 0 rule insertion when an existing timer with
the same label is of ALARM type.
Fixes: 68983a354a ("netfilter: xtables: Add snapshot of hardidletimer target")
Co-developed-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Co-developed-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <dstsmallbird@foxmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label
inside the for loop body. When the "last" helper saved in cb->args[1]
is deleted between dump rounds, every entry fails the (cur != last)
check, so cb->args[1] is never cleared. The for loop finishes with
cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back
into the loop body bypassing the bounds check, causing an 8-byte
out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize].
The 'goto restart' block was meant to re-traverse the current bucket
when "last" is no longer found, but it was placed after the for loop
instead of inside it. Move the block into the for loop body so that
the restart only occurs while cb->args[0] is still within bounds.
BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0
Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131
Call Trace:
nfnl_cthelper_dump_table+0x9f/0x1b0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
sock_recvmsg+0xde/0xf0
__sys_recvfrom+0x150/0x200
__x64_sys_recvfrom+0x76/0x90
do_syscall_64+0xc3/0x6e0
Allocated by task 1:
__kvmalloc_node_noprof+0x21b/0x700
nf_ct_alloc_hashtable+0x65/0xd0
nf_conntrack_helper_init+0x21/0x60
nf_conntrack_init_start+0x18d/0x300
nf_conntrack_standalone_init+0x12/0xc0
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue
entry from the queue data structures, taking ownership of the entry.
For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN
attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN
present but NFQA_VLAN_TCI missing), the function returns immediately
without freeing the dequeued entry or its sk_buff.
This leaks the nf_queue_entry, its associated sk_buff, and all held
references (net_device refcounts, struct net refcount). Repeated
triggering exhausts kernel memory.
Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict
on the error path, consistent with other error handling in this file.
Fixes: 8d45ff22f1 ("netfilter: bridge: nf queue verdict to use NFQA_VLAN and NFQA_L2HDR")
Reviewed-by: David Dull <monderasdor@gmail.com>
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers.
Fixes: 2e4e6a17af ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Signed-off-by: David Dull <monderasdor@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the
to_offset argument on every iteration, including the last one where
i == m->field_count - 1. This reads one element past the end of the
stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS]
with NFT_PIPAPO_MAX_FIELDS == 16).
Although pipapo_unmap() returns early when is_last is true without
using the to_offset value, the argument is evaluated at the call site
before the function body executes, making this a genuine out-of-bounds
stack read confirmed by KASAN:
BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables]
Read of size 4 at addr ffff8000810e71a4
This frame has 1 object:
[32, 160) 'rulemap'
The buggy address is at offset 164 -- exactly 4 bytes past the end
of the rulemap array.
Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid
the out-of-bounds read.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..]
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When handling NETDEV_REGISTER notification, duplicate device
registration must be avoided since the device may have been added by
nft_netdev_hook_alloc() already when creating the hook.
Suggested-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+bb9127e278fa198e110c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bb9127e278fa198e110c
Fixes: a331b78a55 ("netfilter: nf_tables: Respect NETDEV_REGISTER events")
Tested-by: Helen Koike <koike@igalia.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Mike Marciniszyn says:
====================
eth fbnic: Add fbnic self tests
From: "Mike Marciniszyn (Meta)" <mike.marciniszyn@gmail.com>
This series adds self tests to test the registers, the
msix interrupts, the tlv, and the firmware mailbox.
This series assumes that the
[PATCH net-next 0/2] Add debugfs hooks [1]
is present.
When the self tests are run the with ethtool -t:
ethtool -t eth0
The test result is PASS
The test extra info:
Register test (offline) 0
MSI-X Interrupt test (offline) 0
FW mailbox test (on/offline) 0
====================
Link: https://patch.msgid.link/20260307105847.1438-1-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TLV (Type-Value-Length) self uses a known set of data to create a
TLV message. These routines support the MBX self test by creating
the test messages and parsing the response message coming back
from the firmware.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-5-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This function is meant to test the global interrupt registers and the
PCIe IP MSI-X functionality. It essentially goes through and tests
various combinations of the set, clear, and mask bits in order to
verify the behavior is as we expect it to be from the driver.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-4-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register test will be used to verify hardware is behaving as expected.
The test itself will have us writing to registers that should have no
side effects due to us resetting after the test has been completed.
While the test is being run the interface should be offline.
This patch counts on the first patch of this series to export netif_open()
and also ensures that the half close calls netif_close() to
avoid deadlock.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-3-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev_open() already is exported, but drivers which use the netdev
instance lock need to use netif_open() instead. netif_close() is
also already exported [1] so this completes the pairing.
This export is required for the following fbnic self tests to
avoid calling ndo_stop() and ndo_open() in favor of the
more appropriate netif_open() and netif_close() that notifies
any listeners that the interface went down to test and is now
coming back up.
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me [1]
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the header to pull in the changes from commit 3285c471d0
("coresight: Remove misleading definitions").
Signed-off-by: James Clark <james.clark@linaro.org>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/557db631-aef8-43b1-9f45-fae75910ccb4@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a part of MANA hardening for CVM, add validation for the doorbell
ID (db_id) received from hardware in the GDMA_REGISTER_DEVICE response
to prevent out-of-bounds memory access when calculating the doorbell
page address.
In mana_gd_ring_doorbell(), the doorbell page address is calculated as:
addr = db_page_base + db_page_size * db_index
= (bar0_va + db_page_off) + db_page_size * db_index
A hardware could return values that cause this address to fall outside
the BAR0 MMIO region. In Confidential VM environments, hardware responses
cannot be fully trusted.
Add the following validations:
- Store the BAR0 size (bar0_size) in gdma_context during probe.
- Validate the doorbell page offset (db_page_off) read from device
registers does not exceed bar0_size during initialization, converting
mana_gd_init_registers() to return an error code.
- Validate db_id from GDMA_REGISTER_DEVICE response against the
maximum number of doorbell pages that fit within BAR0.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260306211212.543376-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NPU 60XX uses the default boot params location specified
in the firmware image header, consistent with earlier generations.
Remove the unnecessary MMIO register write, freeing the AON register
for future use.
Fixes: 44e4c88951 ("accel/ivpu: Implement warm boot flow for NPU6 and unify boot handling")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260305142226.194995-1-andrzej.kacprowski@linux.intel.com
(cherry picked from commit 81e62e7bf8)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b6 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows to set GDM forward port configuration to
FE_PSE_PORT_DROP stopping the network device. Hw design requires to stop
packet forwarding putting the interface down. Moreover, PPE firmware
requires to use PPE1 for GDM3 or GDM4.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-gdm-forward-ndo-open-stop-v1-1-7b7a20dd9ef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
Add a driver for the pin controller in the Low Power Audio SubSystem
(LPASS) on the Milos SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
My easystack email will be unreachable soon, update my email address to
linux.dev one.
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While head_onwire_len() has a branch to handle ctrl_len == 0 case,
prepare_read_control() always sets up a kvec for the CRC meaning that
a non-empty control segment is effectively assumed. All frames that
clients deal with meet that assumption, so let's make it official and
treat the preamble with an empty control segment as malformed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Similar checks are performed for all control frames, but an early check
for message frames was missing. process_message() is already set up to
terminate the loop in case the state changes while con->ops->dispatch()
handler is being executed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
As per [1], we need one "use" item per line, in order to reduce merge
conflicts. Furthermore, we need a trailing ", //" in order to tell
rustfmt(1) to leave it alone.
This does that for commands.rs, which is the only file in nova-core that
has any remaining instances of the old style.
[1] https://docs.kernel.org/rust/coding-guidelines.html#imports
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-7-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
A tiny simplification: now that FbLayout uses its own specific FbRange
type, add an FbRange.len() method, and use that to (very slightly)
simplify the calculation of Frts::frts_size initialization.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-3-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
For convenience of the reader: now you can directly see the sizes of
each range. It is surprising just how much this helps.
Sample output (using an Ampere GA104):
NovaCore 0000:e1:00.0: FbLayout {
fb: 0x0..0x3ff800000 (16376 MiB),
vga_workspace: 0x3ff700000..0x3ff800000 (1 MiB),
frts: 0x3ff600000..0x3ff700000 (1 MiB),
boot: 0x3ff5fa000..0x3ff600000 (24 KiB),
elf: 0x3fb960000..0x3ff5f9000 (60 MiB),
wpr2_heap: 0x3f3900000..0x3fb900000 (128 MiB),
wpr2: 0x3f3800000..0x3ff700000 (191 MiB),
heap: 0x3f3700000..0x3f3800000 (1 MiB),
vf_partition_count: 0x0,
}
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260310021125.117855-2-jhubbard@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Raju Rangoju says:
====================
amd-xgbe: RX adaptation and PHY handling fixes
This series fixes several issues in the amd-xgbe driver related to RX
adaptation and PHY handling in 10GBASE-KR mode, particularly when
auto-negotiation is disabled.
Patch 1 fixes link status handling during RX adaptation by correctly
reading the latched link status bit so transient link drops are
detected without losing the current state.
Patch 2 prevents CRC errors that can occur when performing RX
adaptation with auto-negotiation turned off. The driver now stops
TX/RX before re-triggering RX adaptation and only re-enables traffic
once adaptation completes and the link is confirmed up, ensuring
packets are not corrupted during the adaptation window.
Patch 3 restores the intended ordering of PHY reset relative to
phy_start(), making sure PHY settings are reset before the PHY is
started instead of afterwards.
====================
Link: https://patch.msgid.link/20260306111629.1515676-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
commit f93505f357 ("amd-xgbe: let the MAC manage PHY PM") moved
xgbe_phy_reset() from xgbe_open() to xgbe_start(), placing it after
phy_start(). As a result, the PHY settings were being reset after the
PHY had already started.
Reorder the calls so that the PHY settings are reset before
phy_start() is invoked.
Fixes: f93505f357 ("amd-xgbe: let the MAC manage PHY PM")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-4-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When operating in 10GBASE-KR mode with auto-negotiation disabled and RX
adaptation enabled, CRC errors can occur during the RX adaptation
process. This happens because the driver continues transmitting and
receiving packets while adaptation is in progress.
Fix this by stopping TX/RX immediately when the link goes down and RX
adaptation needs to be re-triggered, and only re-enabling TX/RX after
adaptation completes and the link is confirmed up. Introduce a flag to
track whether TX/RX was disabled for adaptation so it can be restored
correctly.
This prevents packets from being transmitted or received during the RX
adaptation window and avoids CRC errors from corrupted frames.
The flag tracking the data path state is synchronized with hardware
state in xgbe_start() to prevent stale state after device restarts.
This ensures that after a restart cycle (where xgbe_stop disables
TX/RX and xgbe_start re-enables them), the flag correctly reflects
that the data path is active.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-3-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The link status bit is latched low to allow detection of momentary
link drops. If the status indicates that the link is already down,
read it again to obtain the current state.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260306111629.1515676-2-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ]
Fixes: 6e1cb38a2a ("x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping")
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260306-x2apic-fix-v2-1-bee99c12efa3@sony.com
