Add system suspend and resume capabilities to the common Realtek pinctrl
library. This enables saving and restoring pin configurations during the
noirq phase for SoCs that define register ranges.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Correct the grammar in dev_err() messages. Change "Not support <feature>..."
to "<feature> unsupported..." to improve readability and comply with
standard English usage.
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convert the error handling code in probe() to use dev_err_probe() to
enhance semantic meaning.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Simplify the probe() function by switching to devm-managed versions of
ioremap and pinctrl registration.
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Treating unsupported configurations as errors causes upper layers (like the
GPIO subsystem) to interpret optional features as hard failures, aborting
operations or printing unnecessary error logs.
For example, during gpiod_get(), the GPIO framework attempts to set
PIN_CONFIG_PERSIST_STATE. Since this driver does not support it, false
error reports are generated in dmesg.
Fix this by returning -ENOTSUPP and demoting the log level to dev_dbg.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The LED controller found in the SC2730 PMIC is compatible with the one
found in the SC2731 PMIC.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260222-sc27xx-mfd-cells-v1-2-69526fe74c77@abscue.de
Signed-off-by: Lee Jones <lee@kernel.org>
The EEPROM has limited writes and the contents might have factory set
values that should not be changed. The values currently written by this
driver are just one example of values, but might not be correct for many
use-cases. Do not overwrite the EEPROM with these example values every
probe.
At some point it would be better to populate the content of the EEPROM
based on a configuration provided by the user and check that the values
in EEPROM are not already the same to avoid unneeded write cycles.
That configuration would depend on how the device is used on the board to
which it is attached, for that Device Tree might be the right way. Until a
method can be devised, gate the EEPROM writing behind a module param.
Reported-by: David Owens <daowens01@gmail.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260305203706.841384-5-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
This register is read but the contents are never checked, remove
the read until we add status checking. While here add an error
message should the preceding fault check fail.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260305203706.841384-4-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The lock is taken while unlocking the EEPROM but then released, it should
instead be held for the whole EEPROM programming process. To do this
merge in the lp8860_unlock_eeprom() function to the only call site in
the lp8860_init() function. This way we hold the lock for all steps.
While here, rename this function to lp8860_program_eeprom() to better
represent what it really does.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260305203706.841384-3-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
No need to use goto to jump to a label that also just returns,
return directly in the if statements.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260305203706.841384-2-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Insert a "*" in the kernel-doc line to resolve a warning:
Warning: drivers/pinctrl/nxp/pinctrl-s32.h:18 bad line: this group.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Instead of a regmap table each for the normal registers and the EEPROM
registers, make one table and use an access table to prevent read/write
to/from the registers between the two ranges. Slightly simplifies the
code.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260305203706.841384-1-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
When selecting the high resolution values from the array, FIELD_GET() is
used to pull from a 3 bit register, yet the array being indexed has only
5 values in it. Odds are the hardware is sane, but just to be safe,
properly check before just overflowing and reading random data and then
setting up chip values based on that.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026021934-nearby-playroom-036b@gregkh
Signed-off-by: Lee Jones <lee@kernel.org>
File-scope 'ktd2692_timing' is not used outside of this unit, so make it
static to silence sparse warning:
leds-ktd2692.c:62:33: warning: symbol 'ktd2692_timing' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216110441.160155-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Replace sprintf() with sysfs_emit(), which is the modern standard for
formatting sysfs output.
This change aligng with the kernel's best practices and ensures usage of
the most up to date API.
Signed-off-by: Neel Bullywon <neelb2403@gmail.com>
Link: https://patch.msgid.link/20260207181825.13481-1-neelb2403@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Using min to compare the intensity_value with led_dev->max_brightness
causes a signedness error:
drivers/leds/led-class-multicolor.c: In function 'multi_intensity_store':
././include/linux/compiler_types.h:630:45: error:
call to '__compiletime_assert_195' declared with attribute error:
min(intensity_value[i], led_cdev->max_brightness) signedness error
Change the type of intensity_value to unsigned int to fix the signedness
error.
intensity_value is used to set mcled_cdev->subled_info[i].intensity,
which is unsigned int, too.
Fixes: 129f82752bce ("leds: multicolor: Limit intensity to max_brightness of LED")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://patch.msgid.link/20260206-leds-multicolor-fix-signedness-error-v1-1-48a00ed33c07@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Since introduction of shared proxy, it prints a warning splat
when using a shared spmi gpio.
The implementation is not easy because the controller supports enabling
the input and output logic at the same time, so we aligns on the
behaviour of the .get() operation and return -EINVAL in other
situations.
Fixes: eadff30244 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Fixes: d7b5f5cc5e ("pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The parse_dt_cfg() uses OF and fwnode APIs. Fix this inconsistency by
fully switching it to use fwnode API and rename the function accordingly.
While at it, add missing linux/property.h inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
i.MX95 SCMI firmware is only present on NXP i.MX94 and i.MX95 SoCs.
Hence add a dependency on ARCH_MXC, to prevent asking the user about
this driver when configuring a kernel without NXP i.MX SoC family
support.
While at it, relax the dependencies on ARM_SCMI_PROTOCOL and OF when
compile-testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The RTL9607C SoC has support for 3 GPIO banks with 32 GPIOs each and
the port order is reversed just like in RTL930x.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260305161106.15999-3-adilov@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
There is an inconsistent use of pr_err() statements in the current code.
Many error messages are missing the \n termination, what results in the
messages being printed with a delay, only after a next printk() line is
printed. It prevents relying on printk() to monitor the driver errors.
This patch is modifying only text messages, no functional change.
Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Use uintptr_t for both conversion paths to fix the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The GPU is most useful when used together with the EBC on the PineNote,
which is not yet described. But there's no reason not to define the GPU
already as the hardware is present and could be used without the EBC.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
Link: https://patch.msgid.link/20260305120620.173600-1-diederik@cknow-tech.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In xfs_qm_dqflush(), when a dquot flush fails due to corruption
(the out_abort error path), the original code removed the dquot log
item from the AIL before calling xfs_force_shutdown(). This ordering
introduces a subtle race condition that can lead to data loss after
a crash.
The AIL tracks the oldest dirty metadata in the journal. The position
of the tail item in the AIL determines the log tail LSN, which is the
oldest LSN that must be preserved for crash recovery. When an item is
removed from the AIL, the log tail can advance past the LSN of that item.
The race window is as follows: if the dquot item happens to be at
the tail of the log, removing it from the AIL allows the log tail
to advance. If a concurrent log write is sampling the tail LSN at
the same time and subsequently writes a complete checkpoint (i.e.,
one containing a commit record) to disk before the shutdown takes
effect, the journal will no longer protect the dquot's last
modification. On the next mount, log recovery will not replay the
dquot changes, even though they were never written back to disk,
resulting in silent data loss.
Fix this by calling xfs_force_shutdown() before xfs_trans_ail_delete()
in the out_abort path. Once the log is shut down, no new log writes
can complete with an updated tail LSN, making it safe to remove the
dquot item from the AIL.
Cc: stable@vger.kernel.org
Fixes: b707fffda6 ("xfs: abort consistently on dquot flush failure")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
ip->i_itemp has been set null in xfs_inode_item_destroy(), so there is
no need set it null again in xfs_inode_free_callback().
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Bring in the shared branch with the block layer.
* 'for-7.1/block-integrity' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: pass a maxlen argument to bio_iov_iter_bounce
block: add fs_bio_integrity helpers
block: make max_integrity_io_size public
block: prepare generation / verification helpers for fs usage
block: add a bdev_has_integrity_csum helper
block: factor out a bio_integrity_setup_default helper
block: factor out a bio_integrity_action helper
Signed-off-by: Christian Brauner <brauner@kernel.org>
This patch addresses a potential state inconsistency bug and optimizes
runtime performance:
1. Fix error handling in set_beep_amp():
Previously, beep_nid was assigned before adding kcontrols. If
kcontrol creation failed, the function returned error but left
beep_nid set, causing inconsistent driver state. Moved the
assignment to the end of the function.
2. Optimize senary_auto_turn_eapd():
Removed the redundant snd_hda_query_pin_caps() check inside the
loop. The target pins are sourced from spec->eapds, which is
strictly filtered during the initial parse phase. Checking
capabilities again during every mute/unmute hook is unnecessary
overhead.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260310023649.155858-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCIe pipe clocks are currently left as orphan clocks and remain
enabled indefinitely, which is suboptimal. Add the missing clock gates
so the PCIe driver can explicitly manage them when not in use. In order
not to break compatibility with old DTB, mark them as CLK_IGNORE_UNUSED.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1772799641-32164-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For eDP read the ALPM DPCD caps after DPCD initalization and just before
the PSR init.
v2: Move intel_alpm_init to intel_edp_init_dpcd (Jouni)
v3: Add Fixes with commit-id (Jouni)
v4: Separated the alpm dpcd read caps from alpm_init and moved to
intel_edp_init_dpcd.
v5: Read alpm_caps always for eDP irrespective of the eDP version (Jouni)
v6: replace drm_dp_dpcd_readb with drm_dp_dpcd_read_byte (Jouni)
Fixes: 15438b3259 ("drm/i915/alpm: Add compute config for lobf")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260304072157.1123283-1-arun.r.murthy@intel.com
(cherry picked from commit 88442ba208)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
There are slice row per frame and pic height parameters in DSC that needs
to be configured on every Selective Update in Early Transport mode. Use
helper provided by DSC code to configure these on Selective Update when in
Early Transport mode. Also fill crtc_state->psr2_su_area with full frame
area on full frame update for DSC calculation.
v2: move psr2_su_area under skip_sel_fetch_set_loop label
Bspec: 68927, 71709
Fixes: 467e4e061c ("drm/i915/psr: Enable psr2 early transport as possible")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-5-jouni.hogander@intel.com
(cherry picked from commit 3140af2fab)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Add definitions for DSC_SU_PARAMETER_SET_0_DSC0 and
DSC_SU_PARAMETER_SET_0_DSC1 registers. These are for Selective Update Early
Transport configuration.
Bspec: 71709
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-3-jouni.hogander@intel.com
(cherry picked from commit 24f96d903d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Currently we are aligning Selective Update area to cover cursor fully if
needed only once. It may happen that cursor is in Selective Update area
after pipe alignment and after that covering cursor plane only
partially. Fix this by looping alignment as long as alignment isn't needed
anymore.
v2:
- do not unecessarily loop if cursor was already fully covered
- rename aligned as su_area_changed
Fixes: 1bff93b8bc ("drm/i915/psr: Extend SU area to cover cursor fully if needed")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-2-jouni.hogander@intel.com
(cherry picked from commit 681e12440d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14809
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260224094944.2447913-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 06249b4e69)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE
before enabling TRANS_DDI_FUNC_CTL.
Personally I was only able to reproduce a hang (on an Dell XPS 7390
2-in-1) with an external display connected via a dock using a dodgy
type-C cable that made the link training fail. After the failed
link training the machine would hang. TGL seemed immune to the
problem for whatever reason.
BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL
as well. The DMC firmware also does the VRR restore in two stages:
- first stage seems to be unconditional and includes TRANS_VRR_CTL
and a few other VRR registers, among other things
- second stage is conditional on the DDI being enabled,
and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE,
among other things
So let's reorder the steps to match to avoid the hang, and
toss in an extra WARN to make sure we don't screw this up later.
BSpec: 22243
Cc: stable@vger.kernel.org
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15777
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Fixes: dda7dcd9da ("drm/i915/vrr: Use fixed timings for platforms that support VRR")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260303095414.4331-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
(cherry picked from commit 93f3a267c3)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Add tests for continuation record splitting. They cover boundary
conditions at the split points to make sure the right number of
continuation records are made. They also check that the data
concatenated is correct.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-9-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Splits large RPCs if necessary and sends the remaining parts using
continuation records. RPCs that do not need continuation records
continue to write directly into the command buffer. Ones that do write
into a staging buffer first, so there is one copy.
Continuation record for receive is not necessary to support at the
moment because those replies do not need to be read and are currently
drained by retrying `receive_msg` on `ERANGE`.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-8-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Unconditionally call the variable length payload code, which is a no-op
if there is no such payload but could defensively catch some coding
errors by e.g. checking that the allocated size is completely filled.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-6-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Clarify why using only the first returned slice from allocate_command
for the message headers is okay.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-5-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The limit is 16 pages for a single command sent to the GSP. Return an
error if `allocate_command` is called with a too large size.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-4-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Add the EMSGSIZE error code, which indicates that a message is too
long.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-3-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Add a timeout to `allocate_command` which waits for space on the GSP
command queue. It uses a similar timeout to nouveau.
This lets `send_command` wait for space to free up in the command queue.
This is required to support continuation records which can fill up the
queue.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-2-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
There is no particular order required here and keeping them alphabetical
will help preventing future mistakes.
Tested-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260306-cmdq-continuation-v6-1-cc7b629200ee@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
