The GEM MAC provides four read-only, clear-on-read LPI statistics
registers at offsets 0x270-0x27c:
GEM_RXLPI (0x270): RX LPI transition count (16-bit)
GEM_RXLPITIME (0x274): cumulative RX LPI time (24-bit)
GEM_TXLPI (0x278): TX LPI transition count (16-bit)
GEM_TXLPITIME (0x27c): cumulative TX LPI time (24-bit)
Add register offset definitions, extend struct gem_stats with
corresponding u64 software accumulators, and register the four
counters in gem_statistics[] so they appear in ethtool -S output.
Because the hardware counters clear on read, the existing
macb_update_stats() path accumulates them into the u64 fields on
every stats poll, preventing loss between userspace reads.
These registers are present on SAMA5D2, SAME70, PIC32CZ, and RP1
variants of the Cadence GEM IP and have been confirmed on RP1 via
devmem reads.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-2-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_ehashfn() and inet6_ehashfn() initialise random secrets
on the first call by net_get_random_once().
While the init part is patched out using static keys, with
CONFIG_STACKPROTECTOR_STRONG=y, this causes a compiler to
generate a stack canary due to an automatic variable,
unsigned long ___flags, in the DO_ONCE() macro being passed
to __do_once_start().
With FDO, this is visible in __inet_lookup_established() and
__inet6_lookup_established() too.
Let's initialise the secrets by get_random_sleepable_once()
in the slow paths: inet_hash() for listen(), and
inet_hash_connect() and inet6_hash_connect() for connect().
Note that IPv6 listener will initialise both IPv4 & IPv6 secrets
in inet_hash() for IPv4-mapped IPv6 address.
With the patch, the stack size is reduced by 16 bytes (___flags
+ a stack canary) and NOPs for the static key go away.
Before: __inet6_lookup_established()
...
push %rbx
sub $0x38,%rsp # stack is 56 bytes
mov %edx,%ebx # sport
mov %gs:0x299419f(%rip),%rax # load stack canary
mov %rax,0x30(%rsp) and store it onto stack
mov 0x440(%rdi),%r15 # net->ipv4.tcp_death_row.hashinfo
nop
32: mov %r8d,%ebp # hnum
shl $0x10,%ebp # hnum << 16
nop
3d: mov 0x70(%rsp),%r14d # sdif
or %ebx,%ebp # INET_COMBINED_PORTS(sport, hnum)
mov 0x11a8382(%rip),%eax # inet6_ehashfn() ...
After: __inet6_lookup_established()
...
push %rbx
sub $0x28,%rsp # stack is 40 bytes
mov 0x60(%rsp),%ebp # sdif
mov %r8d,%r14d # hnum
shl $0x10,%r14d # hnum << 16
or %edx,%r14d # INET_COMBINED_PORTS(sport, hnum)
mov 0x440(%rdi),%rax # net->ipv4.tcp_death_row.hashinfo
mov 0x1194f09(%rip),%r10d # inet6_ehashfn() ...
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260303235424.3877267-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remy D. Farley says:
====================
doc/netlink: Expand nftables specification
Getting out some changes I've accumulated while making nftables work
with Rust netlink-bindings. Hopefully, this will be useful upstream.
====================
Link: https://patch.msgid.link/20260303195638.381642-1-one-d-wide@protonmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add definitions for max check and len-or-limit type, the same as in other
specifications.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Remy D. Farley <one-d-wide@protonmail.com>
Link: https://patch.msgid.link/20260303195638.381642-2-one-d-wide@protonmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: qcom-ethqos: further serdes reorganisation
This is part 2 of the qcom-ethqos series, part 1 and patch 2 of part 2
has now been merged.
This part of the series focuses on the generic PHY driver, but these
changes have dependencies on the ethernet driver, hence why
it will need to go via net-next. Furthermore, subsequent changes
depend on these patches.
The underlying ideas here are:
- get rid of the driver using phy_set_speed() with SPEED_1000 and
SPEED_2500 which makes no sense for an ethernet SerDes due to the
PCS 8B10B data encoding, which inflates the data rate at the SerDes
compared to the MAC. This is replaced with phy_set_mode_ext().
- allow phy_power_on() / phy_set_mode*() to be called in any order.
Mohd has tested this series, although not in the resulting merge order.
====================
Link: https://patch.msgid.link/aacD3osfaZkLsGxm@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to phy_set_mode_ext() after phy_power_on() was a work-around
for the qcom-sgmii-eth SerDes driver that only re-enabled its clocks on
phy_power_on() but did not configure the PHY. Now that the SerDes driver
fully configures the SerDes at phy_power_on(), there is no need to call
phy_set_mode_ext() immediately afterwards.
This also means we no longer need to record the previous operating mode
of the driver - this is up to the SerDes driver. In any case, the only
thing that we care about is the SerDes provides the necessary clocks to
the stmmac core to allow it to reset at this point. The actual mode is
irrelevant at this point as the correct mode will be configured in
ethqos_mac_finish_serdes() just before the network device is brought
online.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS4U-0000000BQXy-1Q1v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow any order of the .power_on() and .set_mode*() methods as per the
recent discussion. This means phy_power_on() with this SerDes will now
restore the previous setup without requiring a subsequent
phy_set_mode*() call.
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS4P-0000000BQXs-0vGB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that qcom_dwmac_sgmii_phy_interface() only serves to validate the
passed interface mode, combine it with qcom_dwmac_sgmii_phy_validate(),
and use qcom_dwmac_sgmii_phy_validate() to validate the mode in
qcom_dwmac_sgmii_phy_set_mode().
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS4K-0000000BQXm-0OJL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As established in the previous commit, using SPEED_1000 and SPEED_2500
does not make sense for a SerDes due to the PCS encoding that is used
over the SerDes link, which inflates the data rate at the SerDes. Thus,
the use of these constants in a SerDes driver is incorrect.
Since qcom-sgmii-eth no longer implements phy_set_speed(), but instead
uses the PHY interface mode passed via the .set_mode() method, convert
the driver to use the PHY interface mode internally to decide whether
to configure the SerDes for 1.25Gbps or 3.125Gbps mode.
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS4E-0000000BQXg-46dJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the qcom-ethqos driver has migrated to use phy_set_mode_ext()
rather than phy_set_speed() to configure the SerDes, the support for
phy_set_speed() is now obsolete. Remove support for this method.
Using the MAC speed for the SerDes is never correct due to the PCS
encoding. For SGMII and 2500BASE-X, the PCS uses 8B10B encoding, and
so:
MAC rate * PCS output bits / PCS input bits = SerDes rate
1000M * 10 / 8 = 1250M
2500M * 10 / 8 = 3125M
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS49-0000000BQXa-3Zcg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qcom-sgmii-eth now accepts the phy_set_mode*() calls to configure the
SerDes, taking a PHY interface mode rather than a speed. This allows
the elimination of the interface mode to speed conversion in
ethqos_mac_finish_serdes().
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vxS44-0000000BQXU-38lG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Combine ethqos_set_serdes_speed() with ethqos_mac_finish_serdes() to
simplify the code.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vxS3z-0000000BQXO-2WpU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com>
Fixes: 1cf9f2a6a5 ("smb: client: handle unlink(2) of files open by different clients")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
tcp_v6_early_demux() has a single caller : ip6_rcv_finish_core().
Move it to net/ipv6/ip6_input.c and mark it static, for possible
compiler/linker optimizations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260304022706.1062459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xgene_xfi_mdio_read() prints "write failed" when the MDIO management
interface remains busy and the read times out. Update the message to
"read failed" to match the operation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260304195755.2468204-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nix_smq_flush_enadis_xoff() compares PF_FUNC values with the FUNC bits
masked off, but one operand applied the mask before extracting PF_FUNC
via TXSCH_MAP_FUNC().
Apply RVU_PFVF_FUNC_MASK after TXSCH_MAP_FUNC() for the TL2 scheduler
queue operand, matching the existing handling of the other operand and
making the comparison consistent and clearer.
No functional change intended.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260304193950.2467391-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use struct_group() to group the three fields in tcp_out_options that are
read unconditionally by tcp_options_write() and bpf_skops_write_hdr_opt()
(mss, bpf_opt_len, num_sack_blocks), then replace the full-struct memset
with a targeted memset of only that group.
struct tcp_out_options is 40 bytes without MPTCP and 96 bytes with
CONFIG_MPTCP=y (typical distro config). Every remaining field is either
assigned before first use by tcp_established_options()/tcp_syn_options(),
or gated behind its OPTION_* flag in tcp_options_write(). This memset
runs on every transmitted TCP packet, so shrinking it from 96 (or 40)
bytes to 4 bytes reduces per-packet overhead on the hot path.
Assembly comparison (x86-64, GCC 13, CONFIG_MPTCP=y):
Before: rep stos zeroing 96 bytes (5 instructions, 12 8-byte stores)
After: movl $0x0 zeroing 4 bytes (1 instruction, 1 store)
Also add opts->options = 0 at the top of tcp_syn_options(), which
already used |= without a prior clear. tcp_established_options() already
clears opts->options at its top.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Keita Morisaki <kmta1236@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260304111517.2088694-1-kmta1236@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Realtek RTL8211F-VD has the same LED configuration
and registers as RTL8211F.
Use the existing LED related functions for this chip,
so it is possible to also use the netdev trigger.
Tested on ROCK Pi E.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260304-rtl8211fvd-add-leds-v2-1-d50bd8a50f08@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rx_packets should report the number of frames successfully received:
unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX
counter) is incorrect and can undercount RX packets. RX drops are
already reported via rx_dropped (e.g. etherStatsDropEvents), so
there is no need to adjust rx_packets.
This patch removes the subtraction of ifOutDiscards from rx_packets
in rtl8365mb_stats_update().
Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions `[Pin]Init::__[pinned_]init` and `ptr::write` called from
the `init!` macro require the passed pointer to be aligned. This fact is
ensured by the creation of field accessors to previously initialized
fields.
Since we missed this very important fact from the beginning [1],
document it in the code.
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Fixes: 90e53c5e70 ("rust: add pin-init API core")
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y: 42415d163e: rust: pin-init: add references to previously initialized fields
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y, 6.18.y, 6.19.y
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260302140424.4097655-2-lossin@kernel.org
[ Updated Cc: stable@ tags as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Gary noticed [1] that the initializer macros as well as the `[Pin]Init`
traits cannot support unaligned fields, since they use operations that
require aligned pointers. This means that any code using structs with
unaligned fields in pin-init is unsound.
By default, the `init!` macro generates references to initialized fields,
which makes the compiler check that those fields are aligned. However,
we added the `#[disable_initialized_field_access]` attribute to avoid
this behavior in commit ceca298c53 ("rust: pin-init: internal: init:
add escape hatch for referencing initialized fields"). Thus remove the
`#[disable_initialized_field_access]` attribute from `init!`, which is
the only safe way to create an initializer handling unaligned fields.
If support for in-place initializing structs with unaligned fields is
required in the future, we could figure out a solution. This is tracked
in [2].
Reported-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Link: https://github.com/Rust-for-Linux/pin-init/issues/112 [2]
Fixes: ceca298c53 ("rust: pin-init: internal: init: add escape hatch for referencing initialized fields")
Signed-off-by: Benno Lossin <lossin@kernel.org>
Acked-by: Janne Grunau <j@jannau.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260302140424.4097655-1-lossin@kernel.org
[ Adjusted tags and reworded as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When building with an out directory (O=), absolute paths can end up in the
file name in `#[track_caller]` or the panic message. This is not desirable
as this leaks the exact path being used to build the kernel and means that
the same location can appear in two forms (relative or absolute).
This is reported by Asahi [1] and is being workaround in [2] previously to
force everything to be absolute path. Using absolute path for everything
solves the inconsistency, however it does not address the reproducibility
issue. So, fix this by remap all absolute paths to srctree to relative path
instead.
This is previously attempted in commit dbdffaf50f ("kbuild, rust: use
-fremap-path-prefix to make paths relative") but that was reverted as
remapping debug info causes some tool (e.g. objdump) to be unable to find
sources. Therefore, use `--remap-path-scope` to only remap macros but leave
debuginfo untouched. `--remap-path-scope` is only stable in Rust 1.95, so
use `rustc-option` to detect its presence. This feature has been available
as `-Zremap-path-scope` for all versions that we support; however due to
bugs in the Rust compiler, it does not work reliably until 1.94. I opted to
not enable it for 1.94 as it's just a single version that we missed.
This change can be validated by building a kernel with O=, strip debug info
on vmlinux, and then check if the absolute path exists in `strings
vmlinux`, e.g. `strings vmlinux |grep \/home`.
Reported-by: Janne Grunau <j@jannau.net>
Reported-by: Asahi Lina <lina+kernel@asahilina.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/Per-call-site.20data.20and.20lock.20class.20keys/near/572466559 [1]
Link: 54ab888788 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Nicolas Schier <nsc@kernel.org> # kbuild
Link: https://patch.msgid.link/20260226152112.3222886-1-gary@kernel.org
[ Reworded for few typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Enable drivers commonly used for these boards.
- CONFIG_*TWL*: PMIC mostly used on these devices so enable all functions.
Especially charging is required to avoid having battery drained.
- missing SoC functions (watchdog, thermal, sound)
- TI WiLink chipset support to provide WLAN for
- GTA04A5, Pandaboards, OpenPandora, Moverio BT200
- HCILL to provide Bluetooth on boards with TI WiLink
combo chips
- TCA6507 LEDs: some are used as GPIO os GTA04A4 to provide
Power.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/20260220184336.616623-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
After commit 295d8398c6 ("kbuild: specify output names separately for
each emission type from rustc"), the preferred pattern is to ask rustc to
emit dependency information into $(depfile) directly, and after commit
2185242fad ("kbuild: remove sed commands after rustc rules"), the
post-processing to remove comments is no longer necessary as fixdep can
handle comments directly. Thus, emit dep-info into $(depfile) directly and
remove the mv and sed invocation.
This fixes the issue where a non-ignored .d file is emitted during
compilation and removed shortly afterwards.
[ Like Gary mentioned in Zulip, this likely happened due to rebasing
the builds part of the old `syn` work I had. - Miguel ]
Reported-by: Onur Özkan <work@onurozkan.dev>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/syn.20artifact.20being.20tracked.20by.20git/with/575467879
Fixes: 7dbe46c0b1 ("rust: kbuild: add proc macro library support")
Signed-off-by: Gary Guo <gary@garyguo.net>
Tested-by: Onur Özkan <work@onurozkan.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260224072957.214979-1-gary@garyguo.net
[ Reworded for a couple of typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use the correct struct member names to avoid kernel-doc warnings:
Warning: include/linux/platform_data/voltage-omap.h:27 struct member
'volt_nominal' not described in 'omap_volt_data'
Warning: include/linux/platform_data/voltage-omap.h:27 struct member
'vp_errgain' not described in 'omap_volt_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226051309.556228-1-rdunlap@infradead.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Replace scnprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224144552.585272-1-thorsten.blum@linux.dev
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
the BeagleBone Green with the Seeed Studio HDMI cape.
Enable CONFIG_DRM_TILCDC as a module on multi_v7_defconfig to provide
display support for TI AM335x-based SoCs in this kernel configuration.
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216-feature_bbge-v2-2-22805cfdbf62@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
PVC supports GT error reporting via vector registers along with
error status register. Add support to report these errors and
update respective counters. Incase of Subslice error reported
by vector register, process the error status register
for applicable bits.
The counter is embedded in the xe drm ras structure and is
exposed to the userspace using the drm_ras generic netlink
interface.
$ sudo ynl --family drm_ras --do get-error-counter \
--json '{"node-id":0, "error-id":1}'
{'error-id': 1, 'error-name': 'core-compute', 'error-value': 0}
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260304074412.464435-11-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduces the DRM RAS infrastructure over generic netlink.
The new interface allows drivers to expose RAS nodes and their
associated error counters to userspace in a structured and extensible
way. Each drm_ras node can register its own set of error counters, which
are then discoverable and queryable through netlink operations. This
lays the groundwork for reporting and managing hardware error states
in a unified manner across different DRM drivers.
Currently it only supports error-counter nodes. But it can be
extended later.
The registration is also not tied to any drm node, so it can be
used by accel devices as well.
It uses the new and mandatory YAML description format stored in
Documentation/netlink/specs/. This forces a single generic netlink
family namespace for the entire drm: "drm-ras".
But multiple-endpoints are supported within the single family.
Any modification to this API needs to be applied to
Documentation/netlink/specs/drm_ras.yaml before regenerating the
code:
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode uapi --header \
-o include/uapi/drm/drm_ras.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode kernel \
--header -o drivers/gpu/drm/drm_ras_nl.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml \
--mode kernel --source -o drivers/gpu/drm/drm_ras_nl.c
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260304074412.464435-8-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow overlays to be applied to am335x BeagleBoard boards. This adds
around ~40% to the total size of the DTB files on average.
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260216-feature_bbge-v2-1-22805cfdbf62@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create a device tree for the 10 inch variants (P5100, P5110, P5113)
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-9-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create a device tree for the 7 inch variants (P3100, P3110, P3113)
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-8-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add samsung-espresso7 codename for the 7 inch variant
Add samsung-espresso10 codename for the 10 inch variant
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-7-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create common device tree for Samsung Espresso series devices
Create a shared device tree for all variants first.
Device-specific trees will be added later based on screen size.
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-6-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT
display panel
The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT
display panel
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260303203017.511-5-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well
This can be included in the board files like twl6030
Example:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};
/include/ "twl6032.dtsi"
...
Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-2-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022339-cornflake-t-shirt-2471@gregkh
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The hardware revision for TSMC 3nm-based Qualcomm SOCs should be 7.2,
this can be confirmed from REG_DSI_7nm_PHY_CMN_REVISION_ID0, the value
is 0x27, which means hardware revision is 7.2
No functional change.
Fixes: 1337d7ebfb ("drm/msm/dsi/phy: Add support for SM8750")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707414/
Link: https://lore.kernel.org/r/20260226122958.22555-2-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Glymur platform has four DisplayPort controllers. The hardware
supports four streams (MST) per controller. However, on Glymur the first
three controllers only have two streams wired to the display subsystem,
while the fourth controller operates in single-stream mode.
Add a dedicated clause for the Glymur compatible to require the register
ranges for all four stream blocks, while allowing either one pixel clock
(for the single-stream controller) or two pixel clocks (for the remaining
controllers).
Update the Glymur MDSS schema example by adding the missing p2, p3,
mst2link and mst3link register blocks. Without these, the bindings
validation fails. Also replace the made-up register addresses with the
actual addresses from the first controller to match the SoC devicetree
description.
Cc: stable@vger.kernel.org # v6.19
Fixes: 8f63bf9082 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
Fixes: 1aee577bbc ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708518/
Link: https://lore.kernel.org/r/20260303-glymur-fix-dp-bindings-reg-clocks-v4-1-1ebd9c7c2cee@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
