pr_cont_worker_id() checks pool->flags against WQ_BH, which is a
workqueue-level flag (defined in workqueue.h). Pool flags use a
separate namespace with POOL_* constants (defined in workqueue.c).
The correct constant is POOL_BH. Both WQ_BH and POOL_BH are defined
as (1 << 0) so this has no behavioral impact, but it is semantically
wrong and inconsistent with every other pool-level BH check in the
file.
Fixes: 4cb1ef6460 ("workqueue: Implement BH workqueues to eventually replace tasklets")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The management channel used for firmware control command submission is
currently created after the firmware is started. If channel creation
fails (for example, due to memory allocation failure or workqueue
creation interruption), the firmware remains in a pending state and is
unable to receive any control commands.
To avoid leaving the firmware in this inconsistent state, split
xdna_mailbox_create_channel() into two separate functions so that
resource allocation can be completed before interacting with the
hardware.
xdna_mailbox_alloc_channel()
Allocates memory and initializes the workqueue. This can be called
earlier, before interacting with the hardware.
xdna_mailbox_start_channel()
Performs the hardware interaction required to start the channel.
Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel().
Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel()
properly unwind the corresponding start and allocation steps, respectively.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260305062041.3954024-1-lizhi.hou@amd.com
The devm_ioremap_resource_wc() function never returns NULL, it returns
error pointers. Update the error checking to match.
Fixes: 67a7bc7f03 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260227092110.4044313-1-nichen@iscas.ac.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The devm_ioremap_resource_wc() function never returns NULL, it returns
error pointers. Update the error checking to match.
Fixes: 67a7bc7f03 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260227091546.4044246-1-nichen@iscas.ac.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add remote processor PAS loader for Kaanapali CDSP processor, compatible
with earlier SM8550 with minor difference: one more sixth "shutdown-ack"
interrupt. It is not compatible with SM8650 because one memory region
"global_sync_mem" is not managed by kernel on Kaanapali so it is removed
in the remoteproc cdsp node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260114-knp-remoteproc-v4-2-fcf0b04d01af@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document compatible for Qualcomm Kaanapali SoC ADSP PAS which looks fully
compatible with SM8750, which can fallback to SM8550 except for one more
interrupt ("shutdown-ack").
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260114-knp-remoteproc-v4-1-fcf0b04d01af@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add error checking for regmap_attach_dev() call in
imx_rproc_mmio_detect_mode() function to ensure proper error
propagation.
Return the value of regmap_attach_dev() if it fails to prevent
proceeding with an incomplete regmap setup.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: e14168bf34 ("remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case")
Link: https://lore.kernel.org/r/20260209051407.1467660-1-nichen@iscas.ac.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Smatch reports unreachable code in imx_rproc_prepare(), where an early
return inside the reserved-memory parsing loop prevents platform
prepare_ops from being executed.
When of_reserved_mem_region_to_resource() fails, imx_rproc_prepare()
returns immediately, so the platform-specific prepare callback is never
called. As a result, prepare_ops such as imx_rproc_sm_lmm_prepare() on
i.MX95 have no chance to run.
This is problematic when Linux controls the M7 Logical Machine and is
responsible for preparing resources such as TCM. Without running the
platform prepare callback, loading the M7 ELF into TCM may fail if the
bootloader did not power up and initialize TCM.
Fix this by breaking out of the reserved-memory loop instead of
returning, allowing the platform prepare_ops to be executed as intended.
Fixes: edd2a99560 ("remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-remoteproc/aYYXAa2Fj36XG4yQ@p14s/T/#t
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260208-imx-rproc-fix-v1-1-ad74555eb9a4@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Prior to commit d935187cfb ("remoteproc: mediatek: Break lock
dependency to prepare_lock"), `scp->clk` was prepared and enabled only
when it needs to communicate with the SCP. The commit d935187cfb
moved the prepare operation to remoteproc's prepare(), keeping the clock
prepared as long as the SCP is running.
The power consumption due to the prolonged clock preparation can be
negligible when the system is running, as SCP is designed to be a very
power efficient processor.
However, the clock remains prepared even when the system enters system
suspend. This prevents the underlying clock controller (and potentially
the parent PLLs) from shutting down, which increases power consumption
and may block the system from entering deep sleep states.
Add suspend and resume callbacks. Unprepare the clock in suspend() if
it was active and re-prepare it in resume() to ensure the clock is
properly disabled during system suspend, while maintaining the "always
prepared" semantics while the system is active. The driver doesn't
implement .attach() callback, hence it only checks for RPROC_RUNNING.
Fixes: d935187cfb ("remoteproc: mediatek: Break lock dependency to prepare_lock")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260206033034.3031781-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Message-ID: <20251224161301.135382-1-marco.crivellari@suse.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
This commit corrects the order of arguments passed to panthor_gem_sync()
function, called when the SYNC_WAIT condition has to be evaluated for a
blocked GPU queue.
Fixes: cd2c9c3015 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260305110723.2871733-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Borislav reported a division by zero in the timekeeping code and random
hangs with the new coupled clocksource/clockevent functionality.
It turned out that the TSC clocksource is not always updating the
freq_khz field of the clocksource on registration. The coupled mode
conversion calculation requires the frequency and as it's not
initialized the resulting factor is zero or a random value. As a
consequence this causes a division by zero or random boot hangs.
Instead of chasing down all clocksources which fail to update that
member, fill it in at registration time where the caller has to supply
the frequency anyway. Except for special clocksources like jiffies which
never can have coupled mode.
To make this more robust put a check into the registration function to
validate that the caller supplied a frequency if the coupled mode
feature bit is set. If not, emit a warning and clear the feature bit.
Fixes: cd38bdb8e6 ("timekeeping: Provide infrastructure for coupled clockevents")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/87cy1jsa4m.ffs@tglx
Closes: https://lore.kernel.org/20260303213027.GA2168957@ax162
Nathan reported a boot failure after the coupled clocksource/event support
was enabled for the TSC deadline timer. It turns out that on the affected
test systems the TSC frequency is not refined against HPET, so it is
registered with the same frequency as the TSC-early clocksource.
As a consequence the update function which checks for a change of the
shift/mult pair of the clocksource fails to compute the conversion
limit, which is zero initialized. This check is there to avoid pointless
computations on every timekeeping update cycle (tick).
So the actual clockevent conversion function limits the delta expiry to
zero, which means the timer is always programmed to expire in the
past. This obviously results in a spectacular timer interrupt storm,
which goes unnoticed because the per CPU interrupts on x86 are not
exposed to the runaway detection mechanism and the NMI watchdog is not
yet functional. So the machine simply stops booting.
That did not show up in testing. All test machines refine the TSC frequency
so TSC has a differrent shift/mult pair than TSC-early and the conversion
limit is properly initialized.
Cure that by setting the conversion limit right at the point where the new
clocksource is installed.
Fixes: cd38bdb8e6 ("timekeeping: Provide infrastructure for coupled clockevents")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/87bjh4zies.ffs@tglx
Closes: https://lore.kernel.org/20260303012905.GA978396@ax162
When both IMA and EVM fix modes are enabled, accessing a file with IMA
signature but missing EVM HMAC won't cause security.evm to be fixed.
Add a function evm_fix_hmac which will be explicitly called to fix EVM
HMAC for this case.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Fix an error reported by the kernel test robot:
au1100fb.c: error: implicit declaration of function 'KSEG1ADDR'; did you mean 'CKSEG1ADDR'?
arch/mips/include/asm/addrspace.h defines KSEG1ADDR only for 32 bit
configurations. So provide its compile-test stub also for 64bit mips builds.
Fixes: 6f366e8648 ("fbdev: au1100fb: Make driver compilable on non-mips platforms")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603042127.PT6LuKqi-lkp@intel.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
When a guest performs an atomic/exclusive operation on memory lacking
the required attributes, user_mem_abort() injects a data abort and
returns early. However, it fails to release the reference to the
host page acquired via __kvm_faultin_pfn().
A malicious guest could repeatedly trigger this fault, leaking host
page references and eventually causing host memory exhaustion (OOM).
Fix this by consolidating the early error returns to a new out_put_page
label that correctly calls kvm_release_page_unused().
Fixes: 2937aeec9d ("KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260304162222.836152-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
A moderately large pile of fixes, though none of them are super major,
plus a few new quirks and device IDs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmpqoUACgkQJNaLcl1U
h9BTHQf+MnXcY+kp+Ou9SsrMyrZE7htz3tbjF1SLSAyZeM7OysDVPiHnx2qkDT4N
gM/I3lTmF3nyK2CN0aKvTcUQml0Hdjs3lEDO59uIeBI6SK7tcrQQkh74N2EI4UgH
rbLusOWMGIoUONXZQNns0zpYx8W562SgcW3O6ZW3cRJo6rwKd1UPlM6ywgPtYC+j
Eb7MPjaz1Q2+IReQ6ewOD68k07PWB7cyYjqlQj/v2GT09MFP5uDmOIw82igsqw+Z
af7yKDbg7QNCGgYYu3OT5l/zGBm1CqDMxvgUNtf9d2MN9+hjyI2i3ZtzvDNj6cAl
IUBgqZXE/Tf2tJIMIK77fSFJBYWNGw==
=v+Al
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.0-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
A moderately large pile of fixes, though none of them are super major,
plus a few new quirks and device IDs.
The task ownership state machine in sched_ext is quite hard to follow
from the code alone. The interaction of ownership states, memory
ordering rules and cross-CPU "lock dancing" makes the overall model
subtle.
Extend the documentation next to scx_ops_state to provide a more
structured and self-contained description of the state transitions and
their synchronization rules.
The new reference should make the code easier to reason about and
maintain and can help future contributors understand the overall
task-ownership workflow.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit b5ca117365 ("ima: prevent kexec_load syscall based on runtime
secureboot flag") and commit 268a784049 ("s390/kexec_file: Disable
kexec_load when IPLed secure") disabled the kexec_load syscall based
on the secureboot mode. Commit 9e2b4be377 ("ima: add a new CONFIG
for loading arch-specific policies") needed to detect the secure boot
mode, not to load an IMA architecture specific policy. Since there is
the new CONFIG_INTEGRITY_SECURE_BOOT, drop
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT for s390.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[Vasily Gorbik: Fix missing arch_get_secureboot() prototype warning]
link: https://lore.kernel.org/linux-integrity/c00-01.ttbfdx5@ub.hpns/
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM and other LSMs need the ability to query the secure boot status of
the system, without directly calling the IMA arch_ima_get_secureboot
function. Refactor the secure boot status check into a general function
named arch_get_secureboot.
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
bypass_lb_cpu() reads scx_bypass_lb_intv_us and scx_slice_bypass_us
without holding any lock, in timer callback context where module
parameter writes via sysfs can happen concurrently:
min_delta_us = scx_bypass_lb_intv_us / SCX_BYPASS_LB_MIN_DELTA_DIV;
^^^^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
if (delta < DIV_ROUND_UP(min_delta_us, scx_slice_bypass_us))
^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
scx_bypass_lb_intv_us already uses READ_ONCE() in scx_bypass_lb_timerfn()
and scx_bypass() for its other lock-free read sites, leaving
bypass_lb_cpu() inconsistent. scx_slice_bypass_us has the same
lock-free access pattern in the same function.
Fix both plain reads by using READ_ONCE() to complete the concurrent
access annotation and make the code KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
Larysa Zaremba says:
====================
Address XDP frags having negative tailroom
Aside from the issue described below, tailroom calculation does not account
for pages being split between frags, e.g. in i40e, enetc and
AF_XDP ZC with smaller chunks. These series address the problem by
calculating modulo (skb_frag_off() % rxq->frag_size) in order to get
data offset within a smaller block of memory. Please note, xskxceiver
tail grow test passes without modulo e.g. in xdpdrv mode on i40e,
because there is not enough descriptors to get to flipped buffers.
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case,
but due to tailroom being stored as an unsigned int, it is reported to be
somewhere near UINT_MAX, resulting in a tail being grown, even if the
requested offset is too much(it is around 2K in the abovementioned test).
This later leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169
[ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990
[ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff
[ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace 0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
The issue can also be easily reproduced with ice driver, by applying
the following diff to xskxceiver and enjoying a kernel panic in xdpdrv mode:
diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index 5af28f359cfd..042d587fa7ef 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -2541,8 +2541,8 @@ int testapp_adjust_tail_grow_mb(struct test_spec *test)
{
test->mtu = MAX_ETH_JUMBO_SIZE;
/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
- return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
- XSK_UMEM__LARGE_FRAME_SIZE * 2);
+ return testapp_adjust_tail(test, XSK_UMEM__MAX_FRAME_SIZE * 100,
+ 6912);
}
int testapp_tx_queue_consumer(struct test_spec *test)
If we print out the values involved in the tailroom calculation:
tailroom = rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag);
4294967040 = 3456 - 3456 - 256
I personally reproduced and verified the issue in ice and i40e,
aside from WiP ixgbevf implementation.
====================
Link: https://patch.msgid.link/20260305111253.2317394-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes: ac8a861f63 ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP RxQ info contains frag_size, which depends on the MTU. This makes the
old way of registering RxQ info before calculating new buffer sizes
invalid. Currently, it leads to frag_size being outdated, making it
sometimes impossible to grow tailroom in a mbuf packet. E.g. fragments are
actually 3K+, but frag size is still as if MTU was 1500.
Always register new XDP RxQ info after reconfiguring memory pools.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-4-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current formula for calculating XDP tailroom in mbuf packets works only
if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this
defeats the purpose of the parameter overall and without any indication
leads to negative calculated tailroom on at least half of frags, if shared
pages are used.
There are not many drivers that set rxq->frag_size. Among them:
* i40e and enetc always split page uniformly between frags, use shared
pages
* ice uses page_pool frags via libeth, those are power-of-2 and uniformly
distributed across page
* idpf has variable frag_size with XDP on, so current API is not applicable
* mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool
As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo
operation yields good results for aligned chunks, they are all power-of-2,
between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is
2K. Buffers in unaligned mode are not distributed uniformly, so modulo
operation would not work.
To accommodate unaligned buffers, we could define frag_size as
data + tailroom, and hence do not subtract offset when calculating
tailroom, but this would necessitate more changes in the drivers.
Define rxq->frag_size as an even portion of a page that fully belongs to a
single frag. When calculating tailroom, locate the data start within such
portion by performing a modulo operation on page offset.
Fixes: bf25146a55 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 2 test cases to exercise fix in act_ife's internal metalist
behaviour.
- Update decode ife action into encode with tcindex metadata
- Update decode ife action into encode with multiple metadata
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen says:
====================
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop and add selftest
syzbot reported a kernel panic [1] when an IPv4 route references
a loopback IPv6 nexthop object:
BUG: unable to handle page fault for address: ffff8d069e7aa000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 6aa01067 P4D 6aa01067 PUD 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 2 UID: 0 PID: 530 Comm: ping Not tainted 6.19.0+ #193 PREEMPT
RIP: 0010:ip_route_output_key_hash_rcu+0x578/0x9e0
RSP: 0018:ffffd2ffc1573918 EFLAGS: 00010286
RAX: ffff8d069e7aa000 RBX: ffffd2ffc1573988 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffd2ffc1573978 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d060d496000
R13: 0000000000000000 R14: ffff8d060399a600 R15: ffff8d06019a6ab8
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8d069e7aa000 CR3: 0000000106eb0001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ip_route_output_key_hash+0x86/0x1a0
__ip4_datagram_connect+0x2b5/0x4e0
udp_connect+0x2c/0x60
inet_dgram_connect+0x88/0xd0
__sys_connect_file+0x56/0x90
__sys_connect+0xa8/0xe0
__x64_sys_connect+0x18/0x30
x64_sys_call+0xfb9/0x26e0
do_syscall_64+0xd3/0x1510
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reproduction:
ip -6 nexthop add id 100 dev lo
ip route add 172.20.20.0/24 nhid 100
ping -c1 172.20.20.1 # kernel crash
Problem Description
When a standalone IPv6 nexthop object is created with a loopback device,
fib6_nh_init() misclassifies it as a reject route. Nexthop objects have
no destination prefix (fc_dst=::), so fib6_is_reject() always matches
any loopback nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. When an IPv4 route later references
this nexthop and triggers a route lookup, __mkroute_output() calls
raw_cpu_ptr(nhc->nhc_pcpu_rth_output) on a NULL pointer, causing a page
fault.
The reject classification was designed for regular IPv6 routes to prevent
kernel routing loops, but nexthop objects should not be subject to this
check since they carry no destination information. Loop prevention is
handled separately when the route itself is created.
[1] https://syzkaller.appspot.com/bug?extid=334190e097a98a1b81bb
====================
Link: https://patch.msgid.link/20260304113817.294966-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
Fixes: e15a00aafa ("vxlan: add ipv6 route short circuit support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260304120357.9778-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled.
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Guruprasad C P <gurucp2005@gmail.com>
Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, whenever you boot with a QEMU drive over an AHCI interface,
you get:
[ 1.632121] ata1.00: applying bridge limits
This happens due to the kernel not believing the given drive is SATA,
since word 93 of IDENTIFY (ATA_ID_HW_CONFIG) is non-zero. The result is
a pretty severe limit in max_hw_sectors_kb, which limits our IO sizes.
QEMU has set word 93 erroneously for SATA drives but does not, in any
way, emulate any of these real hardware details. There is no PATA
drive and no SATA cable.
As such, add a BRIDGE_OK quirk for QEMU HARDDISK. Special care is taken
to limit this quirk to "2.5+", to allow for fixed future versions.
This results in the max_hw_sectors being limited solely by the
controller interface's limits. Which, for AHCI controllers, takes it
from 128KB to 32767KB.
Cc: stable@vger.kernel.org
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
As per R_BFHQH,
" When an Address size fault is generated, the reported fault code
indicates one of the following:
If the fault was generated due to the TTBR_ELx used in the translation
having nonzero address bits above the OA size, then a fault at level 0. "
Fix the reported Address size fault level as being 0 if the base address is
wrongly programmed by L1.
Fixes: 61e30b9eef ("KVM: arm64: nv: Implement nested Stage-2 page table walk logic")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260225173515.20490-3-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
check_base_s2_limits() checks the validity of SL0 and inputsize against
ia_size (inputsize again!) but the pseudocode from DDI0487 G.a
AArch64.TranslationTableWalk() says that we should check against the
implemented PA size.
We would otherwise fail to walk S2 with a valid configuration. E.g.,
granule size = 4KB, inputsize = 40 bits, initial lookup level = 0 (no
concatenation) on a system with 48 bits PA range supported is allowed by
architecture.
Fix it by obtaining PA size by kvm_get_pa_bits(). Note that
kvm_get_pa_bits() returns the fixed limit now and should eventually reflect
the per VM PARange (one day!). Given that the configured PARange should not
be greater that kvm_ipa_limit, it at least fixes the problem described
above.
While at it, inject a level 0 translation fault to guest if
check_base_s2_limits() fails, as per the pseudocode.
Fixes: 61e30b9eef ("KVM: arm64: nv: Implement nested Stage-2 page table walk logic")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260225173515.20490-2-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Jakub Kicinski says:
====================
MAINTAINERS: annual cleanup of inactive maintainers
Annual cleanup of inactive maintainers under networking.
The goal is to make sure MAINTAINERS reflect reality for
code which is relatively actively changed (at least 70 commits
in the last 2 years or at least 120 commits in the last 5 years).
Those who either:
- were the initial author / "upstreamer" of the driver; or
- authored at least 1/3rd of the exiting code base (per git blame); or
- authored at least 25% of commits before becoming inactive
are moved to CREDITS.
The discovery of inactive maintainers was done using gitdm tools,
with a bunch of ad-hoc scripts on top to do the rest. I tried to
double check the results but this is mostly a scripted cleanup
so please report inaccuracies if any.
====================
Link: https://patch.msgid.link/20260303215339.2333548-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Thomas's IBM address
(tlfalcon@linux.ibm.com) in over 5 years. Looks like Thomas
is active in perf tooling at Intel (thomas.falcon@intel.com).
Subsystem IBM Power SRIOV Virtual NIC Device Driver
Changes 49 / 134 (36%)
Last activity: 2025-08-26
Haren Myneni <haren@linux.ibm.com>:
Tags 3c14917953 2025-08-26 00:00:00 2
Rick Lindsley <ricklind@linux.ibm.com>:
Nick Child <nnac123@linux.ibm.com>:
Author d93a6caab5 2025-03-25 00:00:00 14
Tags d93a6caab5 2025-03-25 00:00:00 16
Thomas Falcon <tlfalcon@linux.ibm.com>:
Top reviewers:
[22]: drt@linux.ibm.com
[13]: horms@kernel.org
[9]: ricklind@linux.vnet.ibm.com
[3]: davemarq@linux.ibm.com
INACTIVE MAINTAINER Thomas Falcon <tlfalcon@linux.ibm.com>
Move Thomas to CREDITS as the initial author of ibmvnic.
Acked-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://patch.msgid.link/20260303215339.2333548-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from Claudiu for the Ocelot switch driver
in over 5 years. He is active upstream in other NXP subsystems
(ENETC, gianfar), with 46 emails on lore since 2024.
We have not seen tags from Alexandre for the Ocelot switch driver
in over 5 years. He is very active upstream in other subsystems
(RTC, I3C, Atmel/Microchip SoC), with over 1,200 emails on lore
since 2024.
Vladimir Oltean is active.
Subsystem OCELOT ETHERNET SWITCH DRIVER
Changes 180 / 494 (36%)
Last activity: 2026-02-12
Vladimir Oltean <vladimir.oltean@nxp.com>:
Author c22ba07c82 2026-02-10 00:00:00 33
Tags 026f6513c5 2026-02-12 00:00:00 39
Claudiu Manoil <claudiu.manoil@nxp.com>:
Alexandre Belloni <alexandre.belloni@bootlin.com>:
Top reviewers:
[49]: f.fainelli@gmail.com
[19]: horms@kernel.org
[10]: richardcochran@gmail.com
[9]: jacob.e.keller@intel.com
[8]: colin.foster@in-advantage.com
INACTIVE MAINTAINER Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260303215339.2333548-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Jonathan in over 5 years,
and there is no recent mailing list activity.
Vadim Fedorenko is active.
Subsystem OPENCOMPUTE PTP CLOCK DRIVER
Changes 49 / 130 (37%)
Last activity: 2025-11-25
Jonathan Lemon <jonathan.lemon@gmail.com>:
Vadim Fedorenko <vadim.fedorenko@linux.dev>:
Author d3ca2ef0c9 2025-09-19 00:00:00 5
Tags 648282e2d1 2025-11-25 00:00:00 20
Top reviewers:
[7]: horms@kernel.org
[4]: jiri@nvidia.com
[3]: richardcochran@gmail.com
[2]: aleksandr.loktionov@intel.com
INACTIVE MAINTAINER Jonathan Lemon <jonathan.lemon@gmail.com>
Add Jonathan to CREDITS as the initial author of ptp_ocp.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260303215339.2333548-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from Clark for FEC in over 5 years.
He has some limited recent activity on the mailing list in other
NXP subsystems (stmmac, phy). Wei Fang and Shenwei Wang are active,
with decent review coverage (61%).
Frank Li has been reviewing code actively more recenty, let's
make it official.
Subsystem FREESCALE IMX / MXC FEC DRIVER
Changes 57 / 92 (61%)
Last activity: 2026-02-10
Wei Fang <wei.fang@nxp.com>:
Author 25eb3058eb 2026-02-10 00:00:00 33
Tags 25eb3058eb 2026-02-10 00:00:00 61
Shenwei Wang <shenwei.wang@nxp.com>:
Author d466c16026 2025-09-14 00:00:00 6
Tags d466c16026 2025-09-14 00:00:00 6
Clark Wang <xiaoning.wang@nxp.com>:
Top reviewers:
[23]: Frank.Li@nxp.com
[17]: andrew@lunn.ch
[4]: csokas.bence@prolan.hu
[3]: horms@kernel.org
[2]: maxime.chevallier@bootlin.com
INACTIVE MAINTAINER Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260303215339.2333548-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
