Only those IRQs should be acked that are handled, however for SST all
IRQs triggered by the sink are acked. This can be a problem for flags
that are reserved/reading zero at a given moment, but become used for
some purpose - with a side-effect if set - in a future DPCD revision.
Fix the above by acking only those device service IRQs that will be
handled. While at it add asserts that only the known/acked device
service IRQs are handled both in the MST and SST case.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-20-imre.deak@intel.com
Move checking the link status for SST to
intel_dp_handle_link_service_irq(). This is the logical place for the
check which should only happen in response to a LINK_STATUS_CHANGE sink
IRQ. This IRQ is only supported by DPCD revision >= 1.2, so for sinks
with an older DPCD revision the link status is checked in response to
any HPD IRQ. For newer DPCD revisions however the link status check can
be made conditional on LINK_STATUS_CHANGE.
For now keep the current behavior of always forcing a link status check
regardless of LINK_STATUS_CHANGE being set or not.
This also prepares for a follow-up change sharing the link service IRQ
handler for SST and MST (on MST the link status check only happening in
response to a LINK_STATUS_CHANGE IRQ).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-18-imre.deak@intel.com
So far the CONNECTED_OFF_ENTRY_REQUESTED request was accepted only
implicitly, by acking all the IRQs raised by the sink. Make this
explicit by printing a debug message.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-17-imre.deak@intel.com
Read and ack the sink count, sink device and link service IRQs for SST
the same way this is done for MST, the read/ack happening in separate
steps via an ESI (Event Status Indicator) vector.
The above way is more efficient, since on newer (DPCD_REV >= 1.2) sinks
the DP_SINK_COUNT_ESI..DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers can be
read out in one AUX transaction - and the 3 last one written in one
transaction. Also this allows sharing more of the SST and MST IRQ
handling code (done as a follow-up).
For now keep the current behavior of always reading the legacy
DP_SINK_COUNT, DP_DEVICE_SERVICE_IRQ_VECTOR registers and not reading
the DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 register.
v2: Document the ESI vector get/ack helper fnuctions' return value.
(Jani, Luca)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-16-imre.deak@intel.com
If getting/acking the link service IRQs fail, the short HPD handler
should bail out, falling back to a full connector detection as in case
of any AUX access failures during the HPD handling. Do this by
separating the getting/acking and handling steps of the IRQs.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-15-imre.deak@intel.com
If getting/acking the device service IRQs fail, the short HPD handler
should bail out, falling back to a full connector detection as in case
of any AUX access failures during the HPD handling. Do this by
separating the getting/acking and handling steps of the IRQs.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-14-imre.deak@intel.com
An AUX access failure during HPD IRQ handling should be handled by
falling back to a full connector detection, ensure that if the failure
happens while reading/acking a link service IRQ.
While at it add code comment documenting the return value of
intel_dp_check_link_service_irq().
v2: Docuement intel_dp_check_link_service_irq()'s return value. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-13-imre.deak@intel.com
An AUX access failure during HPD IRQ handling should be handled by
falling back to a full connector detection, ensure that if the failure
happens while reading/acking a device service IRQ.
v2: Document intel_dp_check_device_service_irq()'s return value.
(Jani, Luca)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-12-imre.deak@intel.com
The DP_LINK_SERVICE_IRQ_VECTOR_ESI0 DPCD register is supported only
since DPCD REV 1.2, so fix the revision check accordingly.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-11-imre.deak@intel.com
The DP_DEVICE_SERVICE_IRQ_VECTOR DPCD register is supported since DPCD
REV 1.0, so read it out always. Flags added only by later DPCD revisions
are defined as reserved/must-be-zero by earlier DP Standard versions.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-10-imre.deak@intel.com
The device service IRQ handling was added to the connector detect
function by
commit 09b1eb130e ("drm/i915: Move Displayport test request and sink
IRQ logic to intel_dp_detect()")
since some Automated Test Request IRQs couldn't be handled in the short
HPD IRQ handler context. This has been fixed meanwhile by deferring the
handling of all test request events from the IRQ handler to the hotplug
handler (intel_dp_short_pulse() -> intel_dp_test_short_pulse() ->
reprobe) and by handling all hotplug events (both for short and long HPD
pulses) in the test application.
Handling device IRQs during connector detection is not standard
compliant (the IRQs should be handled when an HPD IRQ is raised) and it
happens in a racy way with the same device IRQ handling happening from
the HPD IRQ handler (since the detect and HPD IRQ handler can run in
parallel).
Based on the above, remove the redundant call from the detect function.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-9-imre.deak@intel.com
The intel_dp_get_dpcd() function called from an HPD IRQ handler reads
out the DPRX capabilities from the sink and updates these in the
intel_dp encoder state. Since the IRQ handler can run in parallel with
the encoder/connector detection (intel_dp_detect()) which also calls
intel_dp_get_dpcd(), the encoder state can get corrupted, since the two
updates happen in a racy way.
Fix the above by checking only for any change in the sink count value in
the HPD IRQ handler, without updating the encoder state.
Note that any state change in the sink requiring an update of the
encoder state is handled via the sink's SINK_COUNT change,
RX_CAPS_CHANGED, DOWNSTREAM_PORT_STATUS_CHANGED signaling, which all
should result in a full connector detection.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-8-imre.deak@intel.com
Handle the DOWNSTREAM_PORT_STATUS_CHANGED event a branch device can use
to indicate the state change of a DFP connector on the branch device.
The event is signaled in the DP_LANE_ALIGN_STATUS_UPDATED DPCD register
setting a clear-on-read flag and triggering an HPD IRQ. Accordingly keep
a cached version of the flag, updating it whenever
DP_LANE_ALIGN_STATUS_UPDATED is read. Schedule a full connector
detection from the HPD IRQ handler if the cached flag is set and clear
the cached flag at the start of detection.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-7-imre.deak@intel.com
Handle the RX_CAP_CHANGED IRQ, which a sink can use to indicate a DPRX
capability change without disconnecting and reconnecting itself (i.e.
through a short vs. long HPD pulse). Handle the IRQ by doing a full
connector detection.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-6-imre.deak@intel.com
HPD IRQs in general should be handled after acking them. The
1. Read IRQ register (read DP_DEVICE_SERVICE_IRQ_VECTOR,
DP_LINK_SERVICE_IRQ_VECTOR_ESI0)
2. Handle IRQ
3. Ack IRQ (write DP_DEVICE_SERVICE_IRQ_VECTOR,
DP_LINK_SERVICE_IRQ_VECTOR_ESI0)
sequence would miss a new interrupt triggered after 2. and before 3.,
since the flag set in the IRQ register for this interrupt would be
cleared in step 3.
Fix the above by handling the IRQ after acking it.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-5-imre.deak@intel.com
The MST link status should be always verified from the same DPCD
registers after link training. Atm, both the legacy (0x202 - 0x205) and
the ESI (0x200C - 0x200F) link status registers are used. Use always the
latter ESI version of link status registers.
v2: Propagate error from intel_dp_read_link_status(). (Jani, Luca)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-3-imre.deak@intel.com
An AUX access failure during HPD IRQ handling should be handled by
falling back to a full connector detection, do so.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260225164618.1261368-2-imre.deak@intel.com
The __stackleak_poison() inline assembly comes with a "count" operand where
the "d" constraint is used. "count" is used with the exrl instruction and
"d" means that the compiler may allocate any register from 0 to 15.
If the compiler would allocate register 0 then the exrl instruction would
not or the value of "count" into the executed instruction - resulting in a
stackframe which is only partially poisoned.
Use the correct "a" constraint, which excludes register 0 from register
allocation.
Fixes: 2a405f6bb3 ("s390/stackleak: provide fast __stackleak_poison() implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260302133500.1560531-4-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The inline assembly constraint for the "bytes" operand is "d" for all xor()
inline assemblies. "d" means that any register from 0 to 15 can be used. If
the compiler would use register 0 then the exrl instruction would not or
the value of "bytes" into the executed instruction - resulting in an
incorrect result.
However all the xor() inline assemblies make hard-coded use of register 0,
and it is correctly listed in the clobber list, so that this cannot happen.
Given that this is quite subtle use the better "a" constraint, which
excludes register 0 from register allocation in any case.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260302133500.1560531-3-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The inline assembly constraints for xor_xc_2() are incorrect. "bytes",
"p1", and "p2" are input operands, while all three of them are modified
within the inline assembly. Given that the function consists only of this
inline assembly it seems unlikely that this may cause any problems, however
fix this in any case.
Fixes: 2cfc5f9ce7 ("s390/xor: optimized xor routing using the XC instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260302133500.1560531-2-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
xor_xc_5() contains a larl 1,2f that is not used by the asm and is not
declared as a clobber. This can corrupt a compiler-allocated value in %r1
and lead to miscompilation. Remove the instruction.
Fixes: 745600ed69 ("s390/lib: Use exrl instead of ex in xor functions")
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.count == 1
Phase 2:
Create a delayed iput for a file in the subvol but leave the subvol in
state where its dentry can be evicted (d_lockref.count == 0)
T1 (task) T2 (writeback) T3 (OE workqueue)
write() // dirty pages
btrfs_writepages()
btrfs_run_delalloc_range()
cow_file_range()
btrfs_alloc_ordered_extent()
igrab() // i_count: 1 -> 2
btrfs_unlink_inode()
btrfs_orphan_add()
close()
__fput()
dput()
finish_dput()
__dentry_kill()
dentry_unlink_inode()
iput() // 2 -> 1
--parent->d_lockref.count // 1 -> 0; evictable
finish_ordered_fn()
btrfs_finish_ordered_io()
btrfs_put_ordered_extent()
btrfs_add_delayed_iput()
Phase 3:
Once the delayed iput is pending and the subvol dentry is evictable,
the shrinker can free it, causing the next lookup to go through
btrfs_lookup() and call btrfs_orphan_cleanup() for the first time.
If the cleaner kthread processes the delayed iput concurrently, the
two race:
T1 (shrinker) T2 (cleaner kthread) T3 (lookup)
super_cache_scan()
prune_dcache_sb()
__dentry_kill()
// subvol dentry freed
btrfs_run_delayed_iputs()
iput() // i_count -> 0
evict() // sets I_FREEING
btrfs_evict_inode()
// truncation loop
btrfs_lookup()
btrfs_lookup_dentry()
btrfs_orphan_cleanup()
// first call (bit never set)
btrfs_iget()
// blocks on I_FREEING
btrfs_orphan_del()
// inode freed
// returns -ENOENT
btrfs_del_orphan_item()
// -ENOENT
// "could not do orphan cleanup -2"
d_splice_alias(NULL, dentry)
// negative dentry for valid subvol
The most straightforward fix is to ensure the invariant that a dentry
for a subvolume can exist if and only if that subvolume has
BTRFS_ROOT_ORPHAN_CLEANUP set on its root (and is known to have no
orphans or ran btrfs_orphan_cleanup()).
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zoned_reserve_data_reloc_bg() is called on each mount of a file
system and allocates a new block-group, to assign it to be the dedicated
relocation target, if no pre-existing usable block-group for this task is
found.
If for some reason the transaction is aborted, btrfs_end_transaction()
will wake up the transaction kthread. But the transaction kthread is not
yet initialized at the time btrfs_zoned_reserve_data_reloc_bg() is
called, leading to the following NULL-pointer dereference:
RSP: 0018:ffffc9000c617c98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 000000000000073c RCX: 0000000000000002
RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000001
RBP: 0000000000000207 R08: ffffffff8223c71d R09: 0000000000000635
R10: ffff888108588000 R11: 0000000000000003 R12: 0000000000000003
R13: 000000000000073c R14: 0000000000000000 R15: ffff888114dd6000
FS: 00007f2993745840(0000) GS:ffff8882b508d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000073c CR3: 0000000121a82006 CR4: 0000000000770eb0
PKRU: 55555554
Call Trace:
<TASK>
try_to_wake_up (./include/linux/spinlock.h:557 kernel/sched/core.c:4106)
__btrfs_end_transaction (fs/btrfs/transaction.c:1115 (discriminator 2))
btrfs_zoned_reserve_data_reloc_bg (fs/btrfs/zoned.c:2840)
open_ctree (fs/btrfs/disk-io.c:3588)
btrfs_get_tree.cold (fs/btrfs/super.c:982 fs/btrfs/super.c:1944 fs/btrfs/super.c:2087 fs/btrfs/super.c:2121)
vfs_get_tree (fs/super.c:1752)
__do_sys_fsconfig (fs/fsopen.c:231 fs/fsopen.c:295 fs/fsopen.c:473)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
RIP: 0033:0x7f299392740e
Move the call to btrfs_zoned_reserve_data_reloc_bg() after the
transaction_kthread has been initialized to fix this problem.
Fixes: 694ce5e143 ("btrfs: zoned: reserve data_reloc block group on mount")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've picked the value of TEST_VRAM to match real VRAM size as found
on the machines used by the CI, but that didn't work well on kernels
that have 32-bit resource_size_t. Use smaller value instead.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/intel-xe/20260227011639.GA1683727@ax162/
Fixes: cbe29da6f7 ("drm/xe/tests: Add KUnit tests for new VRAM fair provisioning")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260227160010.12425-1-michal.wajdeczko@intel.com
btrfs_set_periodic_reclaim_ready() requires space_info->lock to be held,
as enforced by lockdep_assert_held(). However, btrfs_reclaim_sweep() was
calling it after do_reclaim_sweep() returns, at which point
space_info->lock is no longer held.
Fix this by explicitly acquiring space_info->lock before clearing the
periodic reclaim ready flag in btrfs_reclaim_sweep().
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208182556.891815-1-clm@meta.com/
Fixes: 19eff93dc7 ("btrfs: fix periodic reclaim condition")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the definitions for the remap tree to print-tree.c, so that we get
more useful information if a tree is dumped to dmesg.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Revert commit 88fad6ce09 ("ACPI: PM: Let acpi_dev_pm_attach() skip
devices without ACPI PM") that introduced a SoundWire suspend regression
[1].
It is actually not true that the commit above doesn't make a functional
difference because acpi_subsys_suspend(), for example, may resume
devices in runtime-suspend which affects the subsequent handling of
those devices during the suspend transition. For this reason, the
devices that were handled by the ACPI PM domain before that commit may
be handled differently now which may lead to suspend-resume issues.
Fixes: 88fad6ce09 ("ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM")
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Closes: https://github.com/thesofproject/linux/pull/5677#issuecomment-3984375077 [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2829615.mvXUDI8C0e@rafael.j.wysocki
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation.
Fixes: 48fa77af2f ("ASoC: SDCA: Add terminal type into input/output widget name")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260303141707.3841635-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit e6e094e053 ("x86/acpi, x86/boot: Take RSDP address from
boot params if available"), the RSDP address can be passed in boot
params. Therefore, store the RSDP address in start_info page into boot
params in the PVH entry instead of registering a different callback.
This removes an absolute reference during the PVH entry and is more
standardized.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <76675c4d49d3a8f72252076812ef8f22276230c2.1772282441.git.houwenlong.hwl@antgroup.com>
Move compat i915_vma.h to xe_display_vma.h, and remove all extra
cruft. Drop the i915_ggtt_offset() wrapper in favour of using
xe_ggtt_node_addr() directly.
The usefulness of the I915_TILING_X and I915_TILING_Y undef/define is
unclear, since uapi/drm/i915_drm.h is included in other paths as well.
The naming of struct i915_vma is a bit unfortunate in xe, but (at least
for now) a necessity for maintaining type safety on the opaque type.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/ecd5d75981b4b21c3da3b1831faceccfe385d898.1772212579.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's unclear what the direction of the VMA abstraction in the parent
interface should be, but convert i915_vma_fence_id() to parent interface
for starters. This paves the way for making struct i915_vma opaque
towards display.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/036f4b2d20cc1b0a7ab814beb5bb914c53b6eb53.1772212579.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The function xen_flush_tlb_others() was renamed xen_flush_tlb_multi()
by commit 4ce94eabac ("x86/mm/tlb: Flush remote and local TLBs
concurrently"). Update the comment accordingly.
Signed-off-by: kexinsun <kexinsun@smail.nju.edu.cn>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260224022424.1718-1-kexinsun@smail.nju.edu.cn>
read_acpi_id() attempts to evaluate _CST using a stack buffer of
sizeof(union acpi_object) (48 bytes), but _CST returns a nested Package
of sub-Packages (one per C-state, each containing a register descriptor,
type, latency, and power) requiring hundreds of bytes. The evaluation
always fails with AE_BUFFER_OVERFLOW.
On modern systems using FFH/MWAIT entry (where pblk is zero), this
causes the function to return before setting the acpi_id_cst_present
bit. In check_acpi_ids(), flags.power is then zero for all Phase 2 CPUs
(physical CPUs beyond dom0's vCPU count), so push_cxx_to_hypervisor() is
never called for them.
On a system with dom0_max_vcpus=2 and 8 physical CPUs, only PCPUs 0-1
receive C-state data. PCPUs 2-7 are stuck in C0/C1 idle, unable to
enter C2/C3. This costs measurable wall power (4W observed on an Intel
Core Ultra 7 265K with Xen 4.20).
The function never uses the _CST return value -- it only needs to know
whether _CST exists. Replace the broken acpi_evaluate_object() call with
acpi_has_method(), which correctly detects _CST presence using
acpi_get_handle() without any buffer allocation. This brings C-state
detection to parity with the P-state path, which already works correctly
for Phase 2 CPUs.
Fixes: 59a5680291 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.")
Signed-off-by: David Thomson <dt@linux-mail.net>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260224093707.19679-1-dt@linux-mail.net>
Parse the data lane count out of DT. Limit the supported data lanes
to 1..4 which is the maximum available DSI pairs on the connector of
any known panels which may use this bridge. Internally, this bridge
is an ChipOne ICN6211 which loads its register configuration from a
dedicated storage and its I2C does not seem to be accessible. The
ICN6211 also supports up to 4 DSI lanes, so this is a hard limit.
To avoid any breakage on old DTs where the parsing of data lanes from
DT may fail, fall back to the original hard-coded value of 2 lanes and
warn user.
The lane configuration is preconfigured in the bridge for each of the
WaveShare panels. The 13.3" DSI panel works with 4-lane configuration,
others seem to use 2-lane configuration. This is a hardware property,
so the actual count should come from DT.
Reviewed-by: Joseph Guo <qijian.guo@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260115024004.660986-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Describe 1..4 DSI lanes as supported. Internally, this bridge is
an ChipOne ICN6211 which loads its register configuration from a
dedicated storage and its I2C does not seem to be accessible. The
ICN6211 supports up to 4 DSI lanes, so this is a hard limit for
this bridge. The lane configuration is preconfigured in the bridge
for each of the WaveShare panels.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260115024004.660986-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
After commit 47ffe0578a ("x86/pvh: Add 64bit relocation page tables"),
the PVH entry uses a new set of page tables instead of the
preconstructed page tables in head64.S. Since those preconstructed page
tables are only used in XENPV now and XENPV does not actually need the
preconstructed identity page tables directly, they can be filled in
xen_setup_kernel_pagetable(). Therefore, build the identity mapping page
table dynamically to remove the preconstructed page tables and make the
code cleaner.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <453981eae7e8158307f971d1632d5023adbe03c3.1769074722.git.houwenlong.hwl@antgroup.com>
Factor out regcache_hw_exit() helper to make error and exit paths
clearer. This helps to avoid missing changes in case the code gets
shuffled in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260303092820.2818138-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When check_bo_args_are_sane() validation fails, jump to the new
free_vmas cleanup label to properly free the allocated resources.
This ensures proper cleanup in this error path.
Fixes: 293032eec4 ("drm/xe/bo: Update atomic_access attribute on madvise")
Cc: stable@vger.kernel.org # v6.18+
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260223175145.1532801-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260303113050.58127-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop.
Fixes: c18d4b190a ("net: Extend NAPI threaded polling to allow kthread based busy polling")
Cc: stable@vger.kernel.org
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20260227221937.1060857-1-zhuyifei@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add optional clock source enet_ref_pad for imx6q, enet1_ref_pad for imx6ul,
which input from ENET ref pad.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260121-ccm_dts-v3-1-820ce9b5fa38@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
- Remove duplicated preempt disable. Disabling preemption has been added
to functions like u64_stats_update_begin() in the meantime.
- Simplify branch structure
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/2ceeb542-986a-404e-ad0f-62e0a938ce7c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
