Use macro __ATTR to simplify the code. Note that __ATTR can't be used
in MDIO_BUS_STATS_ADDR_ATTR_DECL because the included stringification
would conflict with how argument file is passed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/4877a4dc-247c-4453-b281-20a8d969b15b@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the var member of struct dev_ext_attribute is used in a very
ugly way. Extend struct mdio_bus_stat_attr instead, what allows to
simplify the code and also slightly reduces memory footprint.
Note: Member addr is renamed to avoid a conflict in macro
MDIO_BUS_STATS_ADDR_ATTR_DECL.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce9f85d2-4f72-4b15-b868-210a8ced662d@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a has_access_counter feature flag to the graphics IP descriptor
and skip writing parameters for the access counter queue in
guc_um_init_params(), leaving queue_params[2] zero-initialized
to signal unavailability to the GuC.
The queue_params[] array layout is fixed by firmware ABI, so we
maintain the structure with queues 0 and 1 (page fault request/response)
always configured, and queue 2 conditionally skipped based on the
has_access_counter flag.
Bspec: 59323
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Varun Gupta <varun.gupta1@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260225164748.2302380-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
This reverts commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()") and commit 289b14592c ("driver core: fix
inverted "locked" suffix of driver_match_device()").
While technically correct, there is a major downside to this approach:
When a device is already present in the system and a driver is
registered on the same bus, we iterate over all devices registered on
this bus to see if one of them matches. If we come across an already
bound one where the corresponding driver crashed while holding the
device lock (e.g. in probe()) we can't make any progress anymore.
However, drivers are typically the least tested code in the kernel and
hence it is a case that is likely to happen regularly. Besides hurting
developer ergonomics, it potentially decreases chances of shutting
things down cleanly and obtaining logs in production environments as
well [1].
This came up in the context of a firewire bug, which only in combination
with the reverted commit, caused the machine to hang [2]. Additionally,
it was observed in [3].
Thus, revert commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()") and add a brief note clarifying that an
implementer of struct bus_type must not expect match() to be called with
the device lock held.
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Link: https://lore.kernel.org/all/67f655bb-4d81-4609-b008-68d200255dd2@davidgow.net/ [2]
Link: https://lore.kernel.org/lkml/CALbr=LZ4v7N=tO1vgOsyj9AS+XuNbn6kG-QcF+PacdMjSo0iyw@mail.gmail.com/ [3]
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/driver-core/CAHk-=wgJ_L1C=HjcYJotg_zrZEmiLFJaoic+PWthjuQrutrfJw@mail.gmail.com/
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260302002545.19389-1-dakr@kernel.org
[ Add additional Link: reference. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This driver is the only user of mdio_bus_type outside phylib.
Using mdio_bus_type isn't strictly needed here, so use an alternative
approach. This will allow to make mdio_bus_type private to phylib
in a follow-up series.
Compile-tested only.
Note: Devices supported by this driver are OF-only, therefore the string
comparison in match_first_device() isn't needed any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/cc8e83aa-48c3-4497-b6ad-760a7f9e25dc@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits
Reported-by: syzbot+2e2cf5331207053b8106@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e2cf5331207053b8106
Fixes: 3a58f13a88 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260227202336.167757-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement per-user resource limits to prevent resource exhaustion.
Root users can allocate all available contexts (128) and doorbells
(255), while non-root users are limited to half of the available
resources (64 contexts and 127 doorbells respectively).
This prevents scenarios where a single user could monopolize NPU
resources and starve other users on multi-user systems.
Change doorbell ID and command queue ID allocation errors to debug
messages as those are user triggered.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20260302202207.469442-1-maciej.falkowski@linux.intel.com
Add support for HSR and PRP protocol frame filtering in the ICSSG
classifier by configuring filter table 3 (FT3) to detect PTP frames
(EtherType 0x88F7) in HSR/PRP tagged packets.
Also add rx_class_or_base to miig_rt_offsets structure to support
RX_CLASS_OR register access, and fix typos in FT1_N_REG and FT3_N_REG
macros (slize -> slice).
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20260227174254.3821443-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera says:
====================
dpll: zl3073x: consolidate chip info and add temperature reporting
This series refactors the ZL3073x chip variant handling and adds die
temperature reporting for chips that support it.
Patch 1 replaces the five per-variant chip_info structures and their
exported symbols with a single consolidated lookup table. The chip
variant is now detected at runtime from the chip ID register rather
than being selected at compile time via bus driver match data. This
simplifies the I2C/SPI drivers and makes adding new variants a
single-line table addition. A flags field replaces the hardcoded
chip_id switch in zl3073x_dev_is_ref_phase_comp_32bit().
Patch 2 uses the new flags infrastructure to add die temperature
reporting for chip variants that provide a temperature status register.
The temp_get callback is conditionally set during device registration
based on the ZL3073X_FLAG_DIE_TEMP chip flag.
====================
Link: https://patch.msgid.link/20260227105300.710272-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some zl3073x chip variants (0x1Exx, 0x2Exx and 0x3FC4) provide a die
temperature status register with 0.1 C resolution.
Add a ZL3073X_FLAG_DIE_TEMP chip flag to identify these variants and
implement zl3073x_dpll_temp_get() as the dpll_device_ops.temp_get
callback. The register value is converted from 0.1 C units to
millidegrees as expected by the DPLL subsystem.
To support per-instance ops selection, copy the base dpll_device_ops
into struct zl3073x_dpll and conditionally set .temp_get during device
registration based on the chip flag.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260227105300.710272-3-ivecera@redhat.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the five per-variant zl3073x_chip_info structures and their
exported symbol definitions with a single consolidated chip ID lookup
table. The chip variant is now detected at runtime by reading the chip
ID register from hardware and looking it up in the table, rather than
being selected at compile time via the bus driver match data.
Repurpose struct zl3073x_chip_info to hold a single chip ID, its
channel count, and a flags field. Introduce enum zl3073x_flags with
ZL3073X_FLAG_REF_PHASE_COMP_32 to replace the chip_id switch statement
in zl3073x_dev_is_ref_phase_comp_32bit(). Store a pointer to the
detected chip_info entry in struct zl3073x_dev for runtime access.
This simplifies the bus drivers by removing per-variant .data and
.driver_data references from the I2C/SPI match tables, and makes
adding support for new chip variants a single-line table addition.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260227105300.710272-2-ivecera@redhat.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
Fixes: 577dbc6c65 ("mt76: mt7915: enable offloading of sequence number assignment")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-3-b0f6d1ad4850@kernel.org
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-2-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-1-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix issues with ath12k station statistics requests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaaWv9gAKCRAsFbugiYzL
e0rCAQDBvfi6748qu6mWXLN9c74kG1aOFWlk7C4YTmVeOqANngD+OXSuJs01kOBS
dZAPzahSNZz3F7zcuolYDxxOE3J8DwQ=
=dQ5e
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20260302' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.0-rc3
Fix issues with ath12k station statistics requests.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer.
Fixes: 45aa7f071b ("wlcore: Use generic runtime pm calls for wowlan elp configuration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-26-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cw1200_wow_suspend() must only return with priv->conf_mutex locked if it
returns zero. This mutex must be unlocked if an error is returned. Add
mutex_unlock() calls to the error paths from which that call is missing.
This has been detected by the Clang thread-safety analyzer.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-25-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Vimlesh Kumar says:
====================
avoid compiler and IQ/OQ reordering
Utilize READ_ONCE and WRITE_ONCE APIs to prevent compiler
optimization and reordering. Ensure IO queue OUT/IN_CNT
registers are flushed. Relocate IQ/OQ IN/OUT_CNTS updates
to occur before NAPI completion, and replace napi_complete
with napi_complete_done.
====================
Link: https://patch.msgid.link/20260227091402.1773833-1-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-4-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion,
and replace napi_complete with napi_complete_done.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
napi_complete_done (vs napi_complete) allows for better
interrupt coalescing.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-2-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The enable_req_count field already tracks whether the CTI device is
enabled. A non-zero value indicates that the device is active, the
hw_enabled flag is redundant if so.
Remove hw_enabled and update cti_is_active() to check enable_req_count.
Replace open-coded enable_req_count checks with cti_is_active().
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-7-b30fada3cfec@arm.com
Since the CPU PM code has been removed from the CTI driver and the device
is enabled via runtime PM, pm_runtime_active() can be used to check
whether the device is powered.
As a result, the hw_powered flag is redundant, remove it.
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-6-b30fada3cfec@arm.com
According Arm ARM, the CTI ASICCTL register:
"It is IMPLEMENTATION DEFINED whether ASICCTL is implemented in the
Core power domain or in the Debug power domain."
This is the only CTI register that may reside in the core power domain.
However, it has been confirmed that Arm designed CTIs place ASICCTL in
the debug power domain. Furthermore, ASICCTL is implemented only when
CTIDEVID.EXTMUXNUM is non-zero, which is a rare case for CPU CTIs.
For these reasons, it is safe to conclude that all CTI registers are not
located in the CPU power domain. Therefore, the CTI driver does not need
CPU power management.
This commit removes the CPU power management from CTI driver.
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-4-b30fada3cfec@arm.com
According to the Arm ARM (DDI 0487 L.b), ASICCTL is implemented only
when CTIDEVID.EXTMUXNUM is non-zero.
Based on CTIDEVID.EXTMUXNUM, add a flag 'asicctl_impl' to indicate
whether the register is implemented, and access ASICCTL conditionally
based on the flag.
Allow the sysfs node to be visible only when the register is
implemented.
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-3-b30fada3cfec@arm.com
Introduce cti_read_single_reg() as an interface for reading registers
with unlocking the CS lock. Consolidate register read in sysfs
interfaces using this new helper.
Fixes: b5213376c2 ("coresight: cti: Add sysfs access to program function registers")
Fixes: 1a556ca6cc ("coresight: cti: Add sysfs coresight mgmt register access")
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-2-b30fada3cfec@arm.com
The spinlock is acquired sometimes with IRQs disabled and sometimes
without. This leads to inconsistent semantics: the lock can be either
HARDIRQ-safe or HARDIRQ-unsafe, which may trigger lockdep complaints.
Make spinlock usage consistent by acquiring it with disabling IRQs. It
is possible for sysfs knobs to acquire the spinlock for accessing a
CTI device, while at the same time a perf session sends an IPI to
enable the same CTI device. In this case, the spinlock must be
IRQ-safe, which is why all lock acquisitions are changed to disable
IRQs.
Use guard() and scoped_guard() for spinlock to tidy up the code.
Fixes: 984f37efa3 ("coresight: cti: Write regsiters directly in cti_enable_hw()")
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-arm_coresight_cti_refactor_v1-v2-1-b30fada3cfec@arm.com
The GF stats periodic query is used as mechanism to monitor HWC health
check. If this HWC command times out, it is a strong indication that
the device/SoC is in a faulty state and requires recovery.
Today, when a timeout is detected, the driver marks
hwc_timeout_occurred, clears cached stats, and stops rescheduling the
periodic work. However, the device itself is left in the same failing
state.
Extend the timeout handling path to trigger the existing MANA VF
recovery service by queueing a GDMA_EQE_HWC_RESET_REQUEST work item.
This is expected to initiate the appropriate recovery flow by suspende
resume first and if it fails then trigger a bus rescan.
This change is intentionally limited to HWC command timeouts and does
not trigger recovery for errors reported by the SoC as a normal command
response.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aaFShvKnwR5FY8dH@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiayuan Chen says:
====================
bonding: fix missing XDP compat check on xmit_hash_policy change
syzkaller reported a bug https://syzkaller.appspot.com/bug?extid=5a287bcdc08104bc3132
When a bond device is in 802.3ad or balance-xor mode, XDP is supported
only when xmit_hash_policy != vlan+srcmac. This constraint is enforced
in bond_option_mode_set() via bond_xdp_check(), which prevents switching
to an XDP-incompatible mode while a program is loaded. However, the
symmetric path -- changing xmit_hash_policy while XDP is loaded -- had
no such guard in bond_option_xmit_hash_policy_set().
This means the following sequence silently creates an inconsistent state:
1. Create a bond in 802.3ad mode with xmit_hash_policy=layer2+3.
2. Attach a native XDP program to the bond.
3. Change xmit_hash_policy to vlan+srcmac (no error, not checked).
Now bond->xdp_prog is set but bond_xdp_check() returns false for the
same device. When the bond is later torn down (e.g. netns deletion),
dev_xdp_uninstall() calls bond_xdp_set(dev, NULL) to remove the
program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP,
triggering a kernel WARNING:
bond1 (unregistering): Error: No native XDP support for the current bonding mode
------------[ cut here ]------------
dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)
WARNING: net/core/dev.c:10361 at dev_xdp_uninstall net/core/dev.c:10361 [inline], CPU#0: kworker/u8:22/11031
Modules linked in:
CPU: 0 UID: 0 PID: 11031 Comm: kworker/u8:22 Not tainted syzkaller #0 PREEMPT(full)
Workqueue: netns cleanup_net
RIP: 0010:dev_xdp_uninstall net/core/dev.c:10361 [inline]
RIP: 0010:unregister_netdevice_many_notify+0x1efd/0x2370 net/core/dev.c:12393
RSP: 0018:ffffc90003b2f7c0 EFLAGS: 00010293
RAX: ffffffff8971e99c RBX: ffff888052f84c40 RCX: ffff88807896bc80
RDX: 0000000000000000 RSI: 00000000ffffffa1 RDI: 0000000000000000
RBP: ffffc90003b2f930 R08: ffffc90003b2f207 R09: 1ffff92000765e40
R10: dffffc0000000000 R11: fffff52000765e41 R12: 00000000ffffffa1
R13: ffff888052f84c38 R14: 1ffff1100a5f0988 R15: ffffc9000df67000
FS: 0000000000000000(0000) GS:ffff8881254ae000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f60871d5d58 CR3: 000000006c41c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248
cleanup_net+0x56b/0x800 net/core/net_namespace.c:704
process_one_work kernel/workqueue.c:3275 [inline]
process_scheduled_works+0xaec/0x17a0 kernel/workqueue.c:3358
worker_thread+0xa50/0xfc0 kernel/workqueue.c:3439
kthread+0x388/0x470 kernel/kthread.c:467
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Beyond the WARNING itself, when dev_xdp_install() fails during
dev_xdp_uninstall(), bond_xdp_set() returns early without calling
bpf_prog_put() on the old program. dev_xdp_uninstall() then releases
only the reference held by dev->xdp_state[], while the reference held
by bond->xdp_prog is never dropped, leaking the struct bpf_prog.
The fix refactors the core logic of bond_xdp_check() into a new helper
__bond_xdp_check_mode(mode, xmit_policy) that takes both parameters
explicitly, avoiding the need to read them from the bond struct.
bond_xdp_check() becomes a thin wrapper around it.
bond_option_xmit_hash_policy_set() then uses __bond_xdp_check_mode()
directly, passing the candidate xmit_policy before it is committed,
mirroring exactly what bond_option_mode_set() already does for mode
changes.
Patch 1 adds the kernel fix.
Patch 2 adds a selftest that reproduces the WARNING by attaching native
XDP to a bond in 802.3ad mode, then attempting to change xmit_hash_policy
to vlan+srcmac -- verifying the change is rejected with the fix applied.
====================
Link: https://patch.msgid.link/20260226080306.98766-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017e ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/
Fixes: 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When computing the encoder/CRTC state multiple times, such as during
iteration over the possible pipe joiner configurations, it must be
ensured that all state is explicitly initialized each time. At the
moment, this is not guaranteed for the DSC/FEC state within the
encoder/CRTC state. In one iteration trying a pipe joiner configuration,
the DSC state may get initialized without computing the full
CRTC/encoder state due to the given joiner configuration being
impossible. When the same CRTC/encoder state is recomputed in a
subsequent iteration, the previously set non-zero - now stale - DSC/FEC
state may still be present, which is unexpected if a non-DSC
configuration is being computed.
This can lead to a DSC state mismatch error if multiple joiner
configurations are evaluated and the working configuration ultimately
turns out to be a non-DSC one.
Follow the existing pattern and compute the full (DSC/FEC) state on all
code paths (including now the non-DSC path as well) to fix the issue.
Fixes: 1f1e3e5c65 ("drm/i915/dp: Rework pipe joiner logic in compute_config")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7512
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260302102838.1522499-1-imre.deak@intel.com
Add validation checking for outarg offset and outarg size values passed
in by the server. MAX_LFS_FILESIZE is the maximum file size supported.
The fuse_notify_store_out and fuse_notify_retrieve_out structs take in
a uint64_t offset.
Add logic to ensure:
* outarg.offset is less than MAX_LFS_FILESIZE
* outarg.offset + outarg.size cannot exceed MAX_LFS_FILESIZE
* potential uint64_t overflow is fixed when adding outarg.offset and
outarg.size.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
xfstest generic/074 and generic/075 complain result in kernel
warning messages / page dumps.
This is easily reproducible (on 6.19) with
CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_ALWAYS=y
CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_ALWAYS=y
This just adds a test for large folios fuse_try_move_folio
with the same page copy fallback, but to avoid the warnings
from fuse_check_folio().
Cc: stable@vger.kernel.org
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Horst Birthelmer <hbirthelmer@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
gcc 15 complains about an uninitialized variable val that is passed by
reference into fuse_conn_limit_write:
control.c: In function ‘fuse_conn_congestion_threshold_write’:
include/asm-generic/rwonce.h:55:37: warning: ‘val’ may be used uninitialized [-Wmaybe-uninitialized]
55 | *(volatile typeof(x) *)&(x) = (val); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
include/asm-generic/rwonce.h:61:9: note: in expansion of macro ‘__WRITE_ONCE’
61 | __WRITE_ONCE(x, val); \
| ^~~~~~~~~~~~
control.c:178:9: note: in expansion of macro ‘WRITE_ONCE’
178 | WRITE_ONCE(fc->congestion_threshold, val);
| ^~~~~~~~~~
control.c:166:18: note: ‘val’ was declared here
166 | unsigned val;
| ^~~
Unfortunately there's enough macro spew involved in kstrtoul_from_user
that I think gcc gives up on its analysis and sprays the above warning.
AFAICT it's not actually a bug, but we could just zero-initialize the
variable to enable using -Wmaybe-uninitialized to find real problems.
Previously we would use some weird uninitialized_var annotation to quiet
down the warnings, so clearly this code has been like this for quite
some time.
Cc: stable@vger.kernel.org # v5.9
Fixes: 3f649ab728 ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove the fuse_conn argument from function fuse_lookup_init() as it isn't
used since commit 21f621741a ("fuse: fix LOOKUP vs INIT compat
handling").
Signed-off-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When large folio is enabled and the initial folio offset exceeds
PAGE_SIZE, e.g. the position resides in the second page of a large
folio, after the folio copying the offset (in the page) won't be updated
to 0 even though the expected range is successfully copied until the end
of the folio. In this case fuse_fill_write_pages() exits prematurelly
before the request has reached the max_write/max_pages limit.
Fix this by eliminating page offset entirely and use folio offset
instead.
Fixes: d60a6015e1 ("fuse: support large folios for writethrough writes")
Reviewed-by: Horst Birthelmer <hbirthelmer@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The driver sets spec->gen.own_eapd_ctl to take manual control of the
EAPD (External Amplifier). However, senary_init does not turn on the
EAPD, while senary_shutdown turns it off.
Since the generic driver skips EAPD handling when own_eapd_ctl is set,
the EAPD remains off after initialization (e.g., after resume), leaving
the codec in a non-functional state.
Explicitly call senary_auto_turn_eapd in senary_init to ensure the EAPD
is enabled and the codec is functional.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260303081516.583438-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: "Maíra Canal" <mcanal@igalia.com>
Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260227133113.235940-12-tzimmermann@suse.de
Replace gma500's internal framebuffer creation with DRM's standard
helper drm_gem_fb_create(). The result is equivalent. Only keep the
existing tests for color depth and pitch alignment.
v2:
- rebase on upstream changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260206133458.226467-6-tzimmermann@suse.de
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces. This unifies
framebuffer allocation for clients in user space and gma500's internal
fbdev emulation.
Also simplify the clean-up side of the fbdev emulation.
Later patches will allow for streamlining gma500's framebuffer code and
DRM's fbdev emulation in general.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260206133458.226467-5-tzimmermann@suse.de
