Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Slightly optimize account_idle_time_irq() and update_timer_idle():
- Use fast single instruction __atomic64() primitives to update per
cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE()
pairs
- stcctm() is an inline assembly with a full memory barrier. This
leads to a not necessary extra dereference of smp_cpu_mtid in
update_timer_idle(). Avoid this and read smp_cpu_mtid into a
variable
- Use __this_cpu_add() instead of this_cpu_add() to avoid disabling /
enabling of preemption several times in a loop in update_timer_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a comment to update_timer_idle() which describes why wall time (not
steal time) is added to steal_timer. This is not obvious and was reported
by Frederic Weisbecker.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes: 56e62a7370 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We should use READ_ONCE when reading from a SQE, make sure timeout gets
a stable timespec address.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There were merge conflicts in:
drivers/staging/rtl8723bs/core/rtw_ieee80211.c
drivers/staging/sm750fb/sm750_hw.c
that were causing problems, so fix this up in here so that going forward
everyone is on the same page and linux-next does not have problems.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modules are removed from modules_list in gb_audio_manager_remove() and
gb_audio_manager_remove_all() before kobject_put(). The TODO suggesting
list deletion in the kobject release callback is stale and misleading.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-3-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gb_audio_manager_get_module() has no in-tree callers so remove the
unused function to avoid carrying dead code.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Link: https://patch.msgid.link/20260224185421.824210-2-hardik.phalet@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed") with
the direct format string dev_err(&pdev->dev, "clk_prepare_enable
failed\n"). The extra level of indirection through %s is unnecessary.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-4-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace hardcoded -EFAULT returns with dev_err_probe() and PTR_ERR()
when devm_clk_get() fails in fsl_mx6_enable(). This ensures the
correct error code is propagated (e.g. -EPROBE_DEFER for deferred
probing) and avoids log noise during probe deferral.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-3-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_get() never returns NULL, so IS_ERR_OR_NULL() checks are
unnecessary. Replace them with IS_ERR() for both the "mlb" and
"pll8_mlb" clock lookups in fsl_mx6_enable().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260224180750.28468-2-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed header alignment in hal_sdio_get_cmd_addr_8723b that violated
kernel coding style, cleaned the header by pulling arguments onto the
same line.
Signed-off-by: Dhyan K Prajapati <dhyan19022009@gmail.com>
Link: https://patch.msgid.link/20260225085747.9639-1-dhyan19022009@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor sprintf to sysfs_emit in all show functions of the greybus
audio manager module. This follows the standard kernel practice of
using sysfs_emit for sysfs attributes.
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Link: https://patch.msgid.link/20260225071212.9050-1-chakrabortyshubham66@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Asus VivoBook S15 S5507QA is sold with x1e-78-100 and x1p-42-100 SKUs.
Put the common part into one dtsi file to be included for model-specific dts.
Include the common part in the existing Vivobook S15 device tree.
Tested-by: Colin K. Williams <colin@li-nk.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-3-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enables access to EFI variables on this machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-2-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code:
cnt += in_ie[cnt + 1] + 2; /* get next */
is in both the "if" and "else" branches.
Remove this repetition, which will simplify the code and
improve readability.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260224164445.18316-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines to adhere to the Linux kernel
coding style. Issues reported by checkpatch.pl.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
Link: https://patch.msgid.link/20260224161319.89187-1-gawindlin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using a prerelease version as a minimum supported version for
CONFIG_WARN_CONTEXT_ANALYSIS was reasonable to do while LLVM 22 was the
development version so that people could immediately build from main and
start testing and validating this in their own code. However, it can be
problematic when using prerelease versions of LLVM 22, such as Android
clang 22.0.1 (the current android mainline compiler) or when bisecting
LLVM between llvmorg-22-init and llvmorg-23-init, to build the kernel,
as all compiler fixes for the context analysis may not be present,
potentially resulting in warnings that can easily turn into errors.
Now that LLVM 22 is released as 22.1.0, upgrade the check to require at
least this version to ensure that a user's toolchain actually has all
the changes needed for a smooth experience with context analysis.
Fixes: 3269701cb2 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260224-bump-clang-ver-context-analysis-v1-1-16cc7a90a040@kernel.org
The SCHED_DEADLINE scheduler allows reading the statically configured
run-time, deadline, and period parameters through the sched_getattr()
system call. However, there is no immediate way to access, from user space,
the current parameters used within the scheduler: the instantaneous runtime
left in the current cycle, as well as the current absolute deadline.
The `flags' sched_getattr() parameter, so far mandated to contain zero,
now supports the SCHED_GETATTR_FLAG_DL_DYNAMIC=1 flag, to request
retrieval of the leftover runtime and absolute deadline, converted to a
CLOCK_MONOTONIC reference, instead of the statically configured parameters.
This feature is useful for adaptive SCHED_DEADLINE tasks that need to
modify their behavior depending on whether or not there is enough runtime
left in the current period, and/or what is the current absolute deadline.
Notes:
- before returning the instantaneous parameters, the runtime is updated;
- the abs deadline is returned shifted from rq_clock() to ktime_get_ns(),
in CLOCK_MONOTONIC reference; this causes multiple invocations from the
same period to return values that may differ for a few ns (showing some
small drift), albeit the deadline doesn't move, in rq_clock() reference;
- the abs deadline value returned to user-space, as unsigned 64-bit value,
can represent nearly 585 years since boot time;
- setting flags=0 provides the old behavior (retrieve static parameters).
See also the notes from discussion held at OSPM 2025 on the topic
"Making user space aware of current deadline-scheduler parameters".
Signed-off-by: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20250912053937.31636-2-tommaso.cucinotta@santannapisa.it
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.
Fixes: 592903cdcb ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net
Merge series from Antoniu Miclaus <antoniu.miclaus@analog.com>:
Add a devres-managed version of spi_new_ancillary_device() that
automatically unregisters the ancillary SPI device when the parent
device is removed.
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.
Fixes: 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency updates handling code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221068
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20260225001752.890164-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Detecting a bandwidth change for a sink connected through a DP tunnel
depends on updating the sink's DPRX link rate and lane count.
detect_new_tunnel() -> update_tunnel_state() updates the link
configuration only if the tunnel state changes. However, after the
tunnel is created and bandwidth allocation mode is enabled, the tunnel
state itself may remain unchanged.
Record the sink bandwidth before creating the tunnel and compare it to
the bandwidth after tunnel creation and enabling bandwidth allocation
mode, ensuring that any bandwidth change is detected and userspace is
notified accordingly.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-6-imre.deak@intel.com
Split update_tunnel_state() into two helpers: one that updates the
tunnel state, and another that detects whether the tunnel bandwidth
has changed.
This prepares for a follow-up change that needs to compare the current
bandwidth against the value from before the DP tunnel was detected and
bandwidth allocation mode was enabled.
While at it, document the return value of update_tunnel_state().
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-4-imre.deak@intel.com
update_tunnel_state() checks whether a tunnel state change (e.g.
available tunnel bandwidth) affects the list of valid modes for the
sink connected through the tunnel. If so, its caller sends a hotplug
event so userspace can re-enumerate the modes.
A change in tunnel bandwidth does not affect the mode list if the
bandwidth was above the sink's DPRX bandwidth both before and after the
update, since in that case the effective bandwidth remains limited by
the DPRX.
As get_current_link_bw() via intel_dp_max_link_data_rate() already
returns bandwidth values clamped to the DPRX limit, the condition for
detecting a mode list change can be simplified to:
old_bw != new_bw
Remove the explicit checks for whether the bandwidth was below the
maximum DPRX bandwidth before and after the update, and rely on the
clamped bandwidth values instead.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-3-imre.deak@intel.com
During system resume, restoring the pre-suspend display state must not
fail. This requires preserving the sink capabilities from before
suspend, including the available link bandwidth.
If these capabilities are not preserved, the restore modeset may fail,
either due to a missing sink capability or insufficient link bandwidth
for the restored mode.
When the sink is connected through a DP tunnel, prevent such capability
changes by skipping tunnel state updates during resume. This also avoids
updating the sink state via the tunnel while it is being resumed.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-2-imre.deak@intel.com
The uverbs CQ creation UAPI allows users to supply their own umem when
creating a CQ. Update mlx4 to support this model while preserving compatibility
with the legacy interface that allocates umem internally.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-13-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Inline the mlx4_ib_get_cq_umem helper function into its two call sites
(mlx4_ib_create_cq and mlx4_alloc_resize_umem) to prepare for the
transition to modern CQ creation interface.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-12-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The uverbs CQ creation UAPI allows users to supply their own umem for a CQ.
Update mlx5 to support this workflow while preserving support for creating
umem through the legacy interface.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-11-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
All drivers already ensure that the number of CQEs is at least 1.
Add this validation to the core so drivers no longer need to repeat it.
Future patches converting to the .create_user_cq() interface will remove
the per‑driver checks.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-8-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In the current implementation, CQ umem is handled both by ib_core and
the driver. ib_core sometimes creates and destroys it, while the driver
also destroys it.
Store the umem in struct ib_cq and ensure that only ib_core manages
its lifetime, relying solely on its internal reference counter.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-5-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
To manage UMEM objects at the core level and reuse the existing
ib_destroy_cq*() flow, move the UMEM files to be built together with
ib_core. Attempting to call ib_umem_release() from verbs.c currently
results in the following error:
depmod: ERROR: Cycle detected: ib_core -> ib_uverbs -> ib_core
depmod: ERROR: Found 2 modules in dependency cycles!
verbs.c:(.text+0x250c): undefined reference to `ib_umem_release'
Link: https://patch.msgid.link/20260213-refactor-umem-v1-4-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Including ib_umem.h currently triggers circular dependency errors.
These issues can be resolved by removing the include of ib_verbs.h,
which was only needed to resolve the struct ib_device pointer.
>> depmod: ERROR: Cycle detected: ib_core -> ib_uverbs -> ib_core
>> depmod: ERROR: Found 2 modules in dependency cycles!
make[3]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make[3]: Target '__modinst' not remade because of errors.
make[2]: *** [Makefile:1960: modules_install] Error 2
make[1]: *** [Makefile:248: __sub-make] Error 2
make[1]: Target 'modules_install' not remade because of errors.
make: *** [Makefile:248: __sub-make] Error 2
make: Target 'modules_install' not remade because of errors.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-2-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The DMA iterator logic was mixed into verbs and umem-specific code,
forcing all users to include rdma/ib_umem.h. Move the block iterator
logic into iter.c and rdma/iter.h so that rdma/ib_umem.h and
rdma/ib_verbs.h can be separated in a follow-up patch.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-1-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The ioctl structures in libxfs/xfs_fs.h are missing static size checks.
It is useful to have static size checks for these structures as adding
new fields to them could cause issues (e.g. extra padding that may be
inserted by the compiler). So add these checks to xfs/xfs_ondisk.h.
Due to different padding/alignment requirements across different
architectures, to avoid build failures, some structures are ommited from
the size checks. For example, structures with "compat_" definitions in
xfs/xfs_ioctl32.h are ommited.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In libxfs/xfs_ondisk.h, remove some duplicate entries of
XFS_CHECK_STRUCT_SIZE().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add comments explaining when to use XFS_IS_CORRUPT() and ASSERT()
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Update lazy counters in xfs_growfs_rt_bmblock() similar to the way it
is done xfs_growfs_data_private(). This is because the lazy counters are
not always updated and synching the counters will avoid inconsistencies
between frexents and rtextents(total realtime extent count). This will
be more useful once realtime shrink is implemented as this will prevent
some transient state to occur where frexents might be greater than
total rtextents.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
