checkpatch.pl --strict reports a CHECK warning in dw-axi-dmac-platform.c:
CHECK: Alignment should match open parenthesis
This warning occurs when multi-line function calls or expressions have
continuation lines that don't properly align with the opening parenthesis
position.
This patch fixes all instances in dw-axi-dmac-platform.c where continuation
lines were indented with an inconsistent number of spaces/tabs that neither
matched the parenthesis column nor followed a standard indent pattern.
Proper alignment improves code readability and maintainability by making
parameter lists visually consistent across the kernel codebase.
Fixes: 1fe20f1b84 ("dmaengine: Introduce DW AXI DMAC driver")
Fixes: e32634f466 ("dma: dw-axi-dmac: support per channel interrupt")
Signed-off-by: Khairul Anuar Romli <karom.9560@gmail.com>
Link: https://patch.msgid.link/20260202060224.12616-2-karom.9560@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Synopsys DesignWare AXI DMA Controller on Agilex5, the controller
operates on a cache-coherent AXI interface, where DMA transactions are
automatically kept coherent with the CPU caches. In previous generations
SoC (Stratix10 and Agilex) the interconnect was non-coherent, hence there
is no need for dma-coherent property to be presence. In Agilex 5, the
architecture has changed. It introduced a coherent interconnect that
supports cache-coherent DMA.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20260131172856.29227-1-dinguyen@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the Renesas RZ/G3L DMAC block. This is identical to the one found
on the RZ/G3S SoC.
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260203103031.247435-2-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Interrupt emulation can assert the dw-edma IRQ line without updating the
DONE/ABORT bits. With the shared read/write/common IRQ handlers, the
driver cannot reliably distinguish such an emulated interrupt from a
real one and leaving a level IRQ asserted may wedge the line.
Allocate a dedicated, requestable Linux virtual IRQ (db_irq) for
interrupt emulation and attach an irq_chip whose .irq_ack runs the
core-specific deassert sequence (.ack_emulated_irq()). The physical
dw-edma interrupt handlers raise this virtual IRQ via
generic_handle_irq(), ensuring emulated IRQs are always deasserted.
Export the virtual IRQ number (db_irq) and the doorbell register offset
(db_offset) via struct dw_edma_chip so platform users can expose
interrupt emulation as a doorbell.
Without this, a single interrupt-emulation write can leave the level IRQ
line asserted and cause the generic IRQ layer to disable it.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260215152216.3393561-3-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DesignWare eDMA instances support "interrupt emulation", where a
software write can assert the IRQ line without setting the normal
DONE/ABORT status bits.
Introduce core callbacks needed to support this feature:
- .ack_emulated_irq(): core-specific sequence to deassert an emulated
IRQ
- .db_offset(): offset from the DMA register base that is suitable as a
host-writable doorbell target for interrupt emulation
Implement both hooks for the v0 register map. For dw-hdma-v0, provide a
stub .db_offset() returning ~0 until the correct offset is known.
The next patch wires these hooks into the dw-edma IRQ path and exports
the doorbell resources to platform users.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260215152216.3393561-2-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain().
Reported-and-tested-by: syzbot+d988dc155e740d76a331@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/699d5714.050a0220.cdd3c.03e7.GAE@google.com
Fixes: 1d191b4ca5 ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
clk_disable_unprepare() is safe to call with a NULL clk, the
FSL_EDMA_DRV_HAS_CHCLK check is reduntante. Clean up redundant checks.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014024730.751237-1-zhen.ni@easystack.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, CTI driver releases resource by deferring
cti_device_release() to the device unregistration:
cti_remove()
`> coresight_unregister()
`> cti_remove_assoc_from_csdev()
`> device_unregister()
`> cti_device_release()
`> mutex_lock(&ect_mutex)
`> release CTI resource
`> mutex_unlock(&ect_mutex)
In the above flow, two different CTI release callbacks are involved:
cti_remove_assoc_from_csdev() and cti_device_release(). The former is
used by a CoreSight device to unbind its associated CTI helper device,
while the latter releases resources for the CTI device itself. Since
there is no dependency between them, it is unnecessary to defer the CTI
resource release until device unregistration.
This commit releases the resources directly in cti_remove() and remove
the injected release callback.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260224-arm_coresight_refactor_cti_resource_release-v1-1-ff1b2bca9176@arm.com
Configure only the requested channel when a fixed channel is specified
to avoid modifying other channels unintentionally.
Fix parameter configuration when a fixed DMA channel is requested on
i.MX9 AON domain and i.MX8QM/QXP/DXL platforms. When a client requests
a fixed channel (e.g., channel 6), the driver traverses channels 0-5
and may unintentionally modify their configuration if they are unused.
This leads to issues such as setting the `is_multi_fifo` flag unexpectedly,
causing memcpy tests to fail when using the dmatest tool.
Only affect edma memcpy test when the channel is fixed.
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-b4-edma-chanconf-v1-1-886486e02e91@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_fence_array_enable_signaling() runs while holding the array
inline_lock and may add callbacks to underlying fences, which takes
their inline_lock.
Since both locks share the same lockdep class, this valid nesting
triggers a recursive locking warning. Assign a distinct lockdep class
to the array inline_lock so lockdep can correctly model the hierarchy.
Fixes: 5943243914 ("dma-buf: use inline lock for the dma-fence-array")
Cc: Christian König <christian.koenig@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260224183922.2256492-2-matthew.brost@intel.com
Replace the remaining with inclusive terms; it's only this function
name we overlooked at the previous conversion.
Fixes: 53837b4ac2 ("ALSA: usb-audio: Replace slave/master terms")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the packet sizes are taken from the capture stream in the
implicit feedback mode, the sizes might be larger than the upper
boundary defined by the descriptor. As already done for other
transfer modes, we have to cap the sizes accordingly at sending,
otherwise this would lead to an error in USB core at submission of
URBs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We calculate the possible packet sizes beforehand for adaptive and
synchronous endpoints, but we didn't take care of the max frame size
for those pre-calculated values. When a device or a bus limits the
packet size, a high sample rate or a high number of channels may lead
to the packet sizes that are larger than the given limit, which
results in an error from the USB core at submitting URBs.
As a simple workaround, just add the sanity checks of pre-calculated
packet sizes to have the upper boundary of ep->maxframesize.
Fixes: f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dma_fence_chain_enable_signaling() and runs while holding the chain
inline_lock and may add callbacks to underlying fences, which takes
their inline_lock.
Since both locks share the same lockdep class, this valid nesting
triggers a recursive locking warning. Assign a distinct lockdep class
to the chain inline_lock so lockdep can correctly model the hierarchy.
Fixes: a408c0ca0c ("dma-buf: use inline lock for the dma-fence-chain")
Cc: Christian König <christian.koenig@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260224183922.2256492-1-matthew.brost@intel.com
It appears that a !! became ! during a cleanup, resulting in inverted
logic when detecting if a host GICv5 implementation is capable of
virtualization.
Re-add the missing !, fixing the behaviour.
Fixes: 3227c3a89d ("irqchip/gic-v5: Check if impl is virt capable")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260225083130.3378490-1-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we update an SA, we construct a new state and call
xdo_dev_state_add, but never insert it. The existing state is updated,
then we immediately destroy the new state. Since we haven't added it,
we don't go through the standard state delete code, and we're skipping
removing it from the device (but xdo_dev_state_free will get called
when we destroy the temporary state).
This is similar to commit c5d4d7d831 ("xfrm: Fix deletion of
offloaded SAs on failure.").
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
pcpu_num = 0 is a valid value. The marker for "unset pcpu_num" which
makes copy_to_user_state_extra not add the XFRMA_SA_PCPU attribute is
UINT_MAX.
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We're returning an error caused by invalid user input without setting
an extack. Add one.
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The Cirrus Logic CS47L47 codec can generate Jack events so add it to
the wake-capable list.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260223150256.326143-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If a piece of hardware is disabled in ACPI it shouldn't be added to the
bus. Add code to handle this similar to other buses like SPI/I2C.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260223092048.3695135-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from
triggering further error handling. After claiming exit, the caller must kick
the helper kthread work which initiates bypass mode and teardown.
If the calling task gets preempted between claiming exit and kicking the
helper work, and the BPF scheduler fails to schedule it back (since error
handling is now disabled), the helper work is never queued, bypass mode
never activates, tasks stop being dispatched, and the system wedges.
Disable preemption across scx_claim_exit() and the subsequent work kicking
in all callers - scx_disable() and scx_vexit(). Add
lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the
requirement.
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
'modes' in drm_client_modeset_probe may fail to kcalloc. If this
occurs, we jump to 'out', calling modes_destroy on it, which
dereferences it. This may result in a NULL pointer dereference in the
error case. Prevent that.
Fixes: 3039cc0c06 ("drm/client: Make copies of modes")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260224221227.69126-2-jonathan.cavitt@intel.com
The naming convention of the my_syscallX() macros is a bit unfortunate.
They may conflict with application code and the name is very generic.
Switch to __nolibc_syscallX(). The leading underscores place the symbols
in the implementation-defined namespace, avoiding conflicting names.
It is also clearer that these are non-standard extensions from nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260223-nolibc-namespacing-v1-1-52574ffebb2c@weissschuh.net
When handling SCSI command timeouts, if we had no actual command
timeouts (either because the command was a deferred qc or the completion
path won the race with ata_scsi_cmd_error_handler()), we do not need to
go through a port error handling, as there was in fact no errors at all.
Modify ata_scsi_cmd_error_handler() to return the number of commands
that timed out and use this return value in ata_scsi_error() to call
ata_scsi_port_error_handler() only if we had command timeouts, or if
the port EH has already been scheduled due to failed commands.
Otherwise, simply call scsi_eh_flush_done_q() to finish the completed
commands without running the full port error handling.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Add the LCD controller layer definition and atmel_hlcdc_of_match
entry for sama7d65.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20251218040521.463937-3-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel.
Fixes: 15847537b6 ("firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.")
Cc: stable@kernel.org
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Merge the two identical references to the pmc8380_3_gpios node to improve
clarity and remove redundancy.
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260114-hamoa-v1-1-c96ab354924c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There has been a (rare) variant of Dragonboard 820c, utilizing Pro
version of the SoC, with the major difference being CPU and GPU clock
tables. Add a DT file representing this version of the board.
01:13:26.275: B - 417880 - 8996 Pro v1.x detected, Max frequency = 1.8 GHz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-db820c-pro-v1-2-6eece16c5c23@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There exists a variant of the DB820c board, using the APQ8096SG
(MSM8996 Pro) SoC. Describe it in the bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251111-db820c-pro-v1-1-6eece16c5c23@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This driver obtains a bridge pointer from of_drm_find_bridge() in the probe
function and stores it until driver removal. of_drm_find_bridge() is
deprecated, so move to of_drm_find_and_get_bridge() for the bridge to be
refcounted and use bridge->next_bridge to put the reference on
deallocation.
To keep the code as simple and reliable as possible remove the intermediate
next_bridge and selected_bridge variables.
Get/put operations on the remaining pointer is pl->bridge.next_bridge,
which is tied to the struct imx8qxp_pixel_link lifetime, are:
- get reference when assigned (by of_drm_find_and_get_bridge())
- put reference before reassignment if reassignment happens
- put reference when the struct imx8qxp_pixel_link embedding the
struct drm_bridge is destroyed (struct drm_bridge::next_bridge)
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260211-drm-bridge-alloc-getput-drm_of_find_bridge-v6-1-651ddfd13bdb@bootlin.com
Move it up to avoid placing it in both the error and success paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224014141.352642-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
selftests: net: py: improve bkg() error reporting
bkg() is a helper for running commands in the background.
When init or body of a with() block fails check if the bkg()
process already exited and report its status (including stdout/
/stderr). This significantly improves debugability.
====================
Link: https://patch.msgid.link/20260223202633.4126087-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal recently complained:
When [ksft_wait failure] happens, the test fails with a cryptic
message:
# Exception| Exception: Did not receive ready message
Let's try to include the stdout/stderr of the command we tried
to start. E.g. for cmd("false", ksft_wait=True):
# Exception| lib.py.utils.CmdInitFailure: Did not receive ready message
# Exception| CMD: false
# Exception| EXIT: 1
We need to factor out _process_terminate() otherwise the exit
path may try to write to already disconnected self.ksft_term_fd.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260223202633.4126087-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bkg() failures are currently quite hard to debug and spot.
Often we have code along the lines of:
with bkg("./cmd_rx_something -p PORT"):
wait_port_listen(PORT)
cmd("./cmd_tx_something", host=remote)
When wait_port_listen() fails we don't get to see the exit status
of bkg(). Even tho very often it's a failure in the bkg() command
that's actually to blame. Try not to interfere with the bkg()
command error checking.
With:
with bkg("false", exit_wait=True):
time.sleep(0.01) # let the 'false' cmd run
raise Exception("bla")
Before:
.. stack trace ..
# Exception| Exception: bla
After:
.. stack trace ..
# Exception| Exception: bla
# Exception|
# Exception| During handling of the above exception, another exception occurred:
.. stack trace ..
# Exception| lib.py.utils.CmdExitFailure: Command failed: false
# Exception| STDOUT: b''
# Exception| STDERR: b''
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260223202633.4126087-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We recently added GRO stats to bnxt, which are maintained
by the driver. Having "err" in the name of the struct for
ring stats no longer makes sense (as pointed out by Michael,
see Link).
Rename them to "drv" stats, as these are all maintained
by the driver (even if partially based on info from descriptors).
Michael suggested calling these misc, happy to go back to
that. IMHO "drv" is a bit more meaningful that "misc".
Pure rename using sed, no functional changes.
Link: https://lore.kernel.org/CACKFLimgibJ0qkM1AacZVh8MKKy-pE_AAc4KPKZ7GUqebmXW9A@mail.gmail.com
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260223203702.4137801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These sysctls were added in 4cdf507d54 ("icmp: add a global rate
limitation") and their default values might be too small.
Some network tools send probes to closed UDP ports from many hosts
to estimate proportion of packet drops on a particular target.
This patch sets both sysctls to 10000.
Note the per-peer rate-limit (as described in RFC 4443 2.4 (f))
intent is still enforced.
This also increases security, see b38e7819ca
("icmp: randomize the global rate limiter") for reference.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223161742.929830-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is only called from tcp_v6_mtu_reduced() and can be
(auto)inlined by the compiler.
Note that inet6_csk_route_socket() is no longer (auto)inlined,
which is a good thing as it is slow path.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 93/-129 (-36)
Function old new delta
tcp_v6_mtu_reduced 139 228 +89
inet6_csk_route_socket 486 490 +4
__pfx_inet6_csk_update_pmtu 16 - -16
inet6_csk_update_pmtu 113 - -113
Total: Before=25076512, After=25076476, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223153047.886683-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When stmmac_init_timestamping() is called, it clears the receive and
transmit path booleans that allow timestamps to be read. These are
never re-initialised until after userspace requests timestamping
features to be enabled.
However, our copy of the timestamp configuration is not cleared, which
means we return the old configuration to userspace when requested.
This is inconsistent. Fix this by clearing the timestamp configuration.
Fixes: d6228b7cdd ("net: stmmac: implement the SIOCGHWTSTAMP ioctl")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1vuUu4-0000000Afea-0j9B@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For RPC workloads, we alternate tcp_schedule_loss_probe() calls from
output path and from input path, with tp->packets_out value
oscillating between !zero and zero, leading to poor branch prediction.
Move tp->packets_out check from tcp_schedule_loss_probe() to
tcp_set_xmit_timer().
We avoid one call to tcp_schedule_loss_probe() from tcp_ack()
path for typical RPC workloads, while improving branch prediction.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223113501.4070245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: qcom-ethqos: cleanups and re-organise SerDes handling
As the last series had issues with stability, I've changed the approach
in this series to concentrate on keeping much of the SerDes related
code within the qcom-ethqos driver rather than trying to move it out at
this stage. This means it should be possible to bisect these patches and
pinpoint exactly the code movement that causes any instability.
This series starts with various cleanups to qcom-ethqos (the first four
patches) before beginning to move code, passing phylink's phy interface
(which will change) to the fix_mac_speed() method, and then using that
to configure the serdes and inband setting before moving the SerDes
code.
This patch set has been tested.
====================
Link: https://patch.msgid.link/aZwfAFJQcp9f0niI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the RGMII link clock using the set_clk_tx_rate() method rather than
coding it into the .fix_mac_speed() method. This simplifies ethqos's
ethqos_fix_mac_speed().
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLF-0000000ASci-42kh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SerDes speed configuration to phylink's .mac_finish() stage
so that the SerDes is appropriately configured for the interface mode
prior to the link coming up.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLA-0000000AScc-3RFf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qcom-ethqos currently forces inband to be enabled for the Cisco SGMII
speeds (1G, 100M and 10M) but not for 2500BASE-X (2.5G).
Rather than using the speed to determine the forced inband state, use
phylink's PHY interface mode which will switch between SGMII for the
10M, 100M and 1G speeds, and 2500BASE-X for 2.5G.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL5-0000000AScX-2wuM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current phylink phy interface mode to the RGMII and "SGMII"
configuration functions.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL0-0000000AScM-2TN0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current interface mode reported by phylink into the
fix_mac_speed() method. This will be used by qcom-ethqos for its
"SGMII" configuration.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKv-0000000AScG-1zv6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Loopback is enabled to allow the dwmac soft reset to succeed. This
is enabled when clocks are enabled in ethqos_clks_config(), which
happens at driver probe and runtime PM resume - e.g. when the
network device is administratively brought up.
Currently, the loopback is disabled when the link comes up (via
.mac_link_up() calling this driver's .fix_mac_speed().)
Move the qcom_ethqos_set_sgmii_loopback() call which disables
loopback from ethqos_fix_mac_speed() into ethqos' SerDes specific
.mac_finish() method so that loopback is disabled a little earlier
after reset has completed, and dwmac setup has completed.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKq-0000000AScA-1Wh3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
