1) daddr is unlikely a multicast in ip6_finish_output2().
2) ip6_finish_output_gso_slowpath_drop() should not be called often.
3) ip6_fragment() should not be called often.
4) opt is unlikely to be set.
5) ip6_xmit() and ip6_forward() mostly sends not too big packets.
6) Most __ip6_make_skb() calls are for UDP packets,
not ICMPV6 ones.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_STACKPROTECTOR_STRONG=y, it is better to avoid passing
a pointer to an automatic variable.
Change these exported functions to return 'u8 proto'
instead of void.
- ipv6_push_nfrag_opts()
- ipv6_push_frag_opts()
For instance, replace
ipv6_push_frag_opts(skb, opt, &proto);
with:
proto = ipv6_push_frag_opts(skb, opt, proto);
Note that even after this change, ip6_xmit() has to use a stack canary
because of @first_hop variable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx->skey field contains a struct tipc_aead_key with GCM-AES
encryption keys used for TIPC cluster communication. Using plain
kfree() leaves this sensitive key material in freed memory pages
where it could potentially be recovered.
Switch to kfree_sensitive() to ensure the key material is zeroed
before the memory is freed.
Fixes: 1ef6f7c939 ("tipc: add automatic session key exchange")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260131180114.2121438-1-hodgesd@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many network drivers have unnecessary empty module_init and module_exit
functions. Remove them (including some that just print a message). Note
that if a module_init function exists, a module_exit function must also
exist; otherwise, the module cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260131004327.18112-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The module version is useless, and the only thing these drivers' init
routines did besides pci_register_driver was to print the driver name
and/or version.
Acked-by: Francois Romieu <romieu@fr.zoreil.com> (epic100)
Reviewed-by: Simon Horman <horms@kernel.org> (epic100, sis900)
Reviewed-by: Sai Krishna <saikrishnag@marvell.com> (epic100)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131022441.56274-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following check, to detect bugs sooner for CONFIG_DEBUG_NET=y
builds.
DEBUG_NET_WARN_ON_ONCE(skb->data < skb->head);
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130160253.2936789-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sean Anderson says:
====================
net: phy: dp83867: Always program R/SGMII enable bits
The hardware designers at my company neglected to read the datasheet for
this PHY and did not add appropriate resistors to configure it for
SGMII. Add support for configuring the it based on phy-mode instead of
relying on the resistors for a suitable default.
====================
Link: https://patch.msgid.link/20260129171205.3868605-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the board designers have neglected to populate the appropriate
resistors on the strapping pins then the phy may default to the wrong
interface mode. Enable/disable the RGMII/SGMII enable bits as necessary
to select the correct interface.
The dp83867 strapping pins have four levels and typically configure two
features at once. LED_0 controls both port mirroring and whether SGMII
is enabled. If it is pulled to VDDIO, both port mirroring and SGMII
will be enabled. For variants of the dp83867 that do not support SGMII,
this will prevent data from being transferred. As we now explicitly set
the SGMII and RGMII enable bits, we do not need to detect whether SGMII
has been inadvertently enabled.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260129171205.3868605-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All supported interfaces use the TX FIFO register at least some of the
time, so there's no point in checking the interface. Retain the check
for the RX FIFO level since it is only used by SGMII.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260129171205.3868605-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek reported that suspending stm32 causes the following errors when
the interface is administratively down:
$ echo devices > /sys/power/pm_test
$ echo mem > /sys/power/state
...
ck_ker_eth2stp already disabled
...
ck_ker_eth2stp already unprepared
...
On suspend, stm32 starts the eth2stp clock in its suspend method, and
stops it in the resume method. This is because the blamed commit omits
the call to the platform glue ->suspend() method, but does make the
call to the platform glue ->resume() method.
This problem affects all other converted drivers as well - e.g. looking
at the PCIe drivers, pci_save_state() will not be called, but
pci_restore_state() will be. Similar issues affect all other drivers.
Fix this by always calling the ->suspend() method, even when the network
interface is down. This fixes all the conversions to the platform glue
->suspend() and ->resume() methods.
Link: https://lore.kernel.org/r/20260114081809.12758-1-marex@nabladev.com
Fixes: 07bbbfe7ad ("net: stmmac: add suspend()/resume() platform ops")
Reported-by: Marek Vasut <marex@nabladev.com>
Tested-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vlujh-00000007Hkw-2p6r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Look up the fsverity_info once in end_buffer_async_read_io, and then
pass it along to the I/O completion workqueue in
struct postprocess_bh_ctx.
This amortizes the lookup better once it becomes less efficient.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20260202060754.270269-8-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pass a struct fsverity_info to the verification and readahead helpers,
and push the lookup into the callers. Right now this is a very dumb
almost mechanic move that open codes a lot of fsverity_info_addr() calls
in the file systems. The subsequent patches will clean this up.
This prepares for reducing the number of fsverity_info lookups, which
will allow to amortize them better when using a more expensive lookup
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260202060754.270269-7-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
A lot of file system code expects a non-const inode pointer. Dropping
the const qualifier here allows using the inode pointer in
verify_data_block and prepares for further argument reductions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://lore.kernel.org/r/20260202060754.270269-6-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently all reads of the fsverity hashes are kicked off from the data
I/O completion handler, leading to needlessly dependent I/O. This is
worked around a bit by performing readahead on the level 0 nodes, but
still fairly ineffective.
Switch to a model where the ->read_folio and ->readahead methods instead
kick off explicit readahead of the fsverity hashed so they are usually
available at I/O completion time.
For 64k sequential reads on my test VM this improves read performance
from 2.4GB/s - 2.6GB/s to 3.5GB/s - 3.9GB/s. The improvements for
random reads are likely to be even bigger.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260202060754.270269-5-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Keep all the read into pagecache code in a single file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20260202060754.270269-4-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is
problematic. I think I did this to make it clear that the context
does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE
which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful
when reading the value back, and remember to treat 0xff as 0.
Remove the initialization and switch to storing 0. This lets us
also remove the workaround in ethnl_rss_set(). Get side does not
need any adjustments and context get no longer reports:
RSS input transformation:
symmetric-xor: on
symmetric-or-xor: on
Unknown bits in RSS input transformation: 0xfc
for NICs which don't support input_xfrm.
Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it.
As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE
is 0 and struct is zalloc'd. But as this fix exemplifies storing
NO_CHANGE as state is fragile.
This issue is implicitly caught by running our selftests because
YNL in selftests errors out on unknown bits.
Fixes: d3e2c7bab1 ("ethtool: rss: support setting input-xfrm via Netlink")
Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the RCU section a bit so that we can use the safer
skb_dst_dev_rcu() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130191906.3781856-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It appears that in commit 7efd79c0e6 ("bnxt_en: Add drop action
support for ntuple"), bnxt gained support for ntuple filters for packet
drops.
However, support for this does not seem to work in recent kernels or
against net-next:
% sudo ethtool -U eth0 flow-type udp4 src-ip 1.1.1.1 action -1
rmgr: Cannot insert RX class rule: Operation not supported
Cannot insert classification rule
The issue is that the existing code uses ethtool_get_flow_spec_ring_vf,
which will return a non-zero value if the ring_cookie is set to
RX_CLS_FLOW_DISC, which then causes bnxt_add_ntuple_cls_rule to return
-EOPNOTSUPP because it thinks the user is trying to set an ntuple filter
for a vf.
Fix this by first checking that the ring_cookie is not RX_CLS_FLOW_DISC.
After this patch, ntuple filters for drops can be added:
% sudo ethtool -U eth0 flow-type udp4 src-ip 1.1.1.1 action -1
Added rule with ID 0
% ethtool -n eth0
44 RX rings available
Total 1 rules
Filter: 0
Rule Type: UDP over IPv4
Src IP addr: 1.1.1.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Drop
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260131003042.2570434-1-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the default (non-JSON) output more compact. Looking at RSS
context dumps is pretty much impossible without this, because
default print shows the indirection table with line per entry:
'indir': [0,
1,
2,
...
And indirection tables have 100-200 entries each.
The compact output is far more readable:
'indir': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260131203029.1173492-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spell out the recommendation that the RSS table should be
4x the queue count to avoid traffic imbalance. Include minor
rephrasing and removal of the explicit 128 entry example
since a 128 entry table is inadequate on modern machines.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131225454.1225151-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test which checks that the RSS table is at least 4x the max
queue count supported by the device. The original RSS spec from
Microsoft stated that the RSS indirection table should be 2 to 8
times the CPU count, presumably assuming queue per CPU. If the
CPU count is not a power of two, however, a power-of-2 table
2x larger than queue count results in a 33% traffic imbalance.
Validate that the indirection table is at least 4x the queue
count. This lowers the imbalance to 16% which empirically
appears to be more acceptable to memcache-like workloads.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260131225454.1225151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Print the PHY driver used and interrupt status after connection.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260201100001.33102-1-amadeus@jmu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After linkwatch_do_dev() calls __dev_put() to release the linkwatch
reference, the device refcount may drop to 1. At this point,
netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an
empty list and returns without blocking), wait for the refcount to
become 1 via netdev_wait_allrefs_any(), and then free the device
via kobject_put().
This creates a use-after-free when __linkwatch_run_queue() tries to
call netdev_unlock_ops() on the already-freed device.
Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in
netdev_run_todo() before kobject_put() would not work, because
netdev_lock_ops() is conditional - it only locks when
netdev_need_ops_lock() returns true. If the device doesn't require
ops_lock, linkwatch won't hold any lock, and netdev_run_todo()
acquiring the lock won't provide synchronization.
Fix this by moving __dev_put() from linkwatch_do_dev() to its
callers. The device reference logically pairs with de-listing the
device, so it's reasonable for the caller that did the de-listing
to release it. This allows placing __dev_put() after all device
accesses are complete, preventing UAF.
The bug can be reproduced by adding mdelay(2000) after
linkwatch_do_dev() in __linkwatch_run_queue(), then running:
ip tuntap add mode tun name tun_test
ip link set tun_test up
ip link set tun_test carrier off
ip link set tun_test carrier on
sleep 0.5
ip tuntap del mode tun name tun_test
KASAN report:
==================================================================
BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123
CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events_unbound linkwatch_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x156/0x4c9 mm/kasan/report.c:482
kasan_report+0xdf/0x1a0 mm/kasan/report.c:595
netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
__linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304
process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3421
kthread+0x3b3/0x730 kernel/kthread.c:463
ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
==================================================================
Fixes: 04efcee6ef ("net: hold instance lock during NETDEV_CHANGE")
Reported-by: syzbot+1ec2f6a450f0b54af8c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6824d064.a70a0220.3e9d8.001a.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260201135915.393451-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: bf38b87108 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: aad628c1d9 ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The pattern match [0-19] is incorrect and does not cover range of 0..19,
use pattern 1?[0-9] to cover range 0..19 instead. Update the example to
validate all parts of the pattern match and prevent such failures in the
future.
Fixes: 26c1bc67aa ("dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Renesas 9-series PCIe clock generator driver from
SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the __maybe_unused annotations from its suspend and
resume callbacks, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 'drv_offset' member in 'struct mtk_pinctrl_devdata' has been unused
since the driver's inception. Drive strength control for MediaTek
pinctrl drivers is actually configured via 'pin_drv_grp',
making this specific offset field redundant.
Remove the unused field from the common 'mtk_pinctrl_devdata' structure
and its corresponding initialization in the mt8365 driver to clean up
the code and avoid confusion.
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When probing the k230 pinctrl driver, the kernel triggers a NULL pointer
dereference. The crash trace showed:
[ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[ 0.740737] ...
[ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc
In k230_pinctrl_parse_functions(), we attempt to retrieve the device
pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized
after k230_pinctrl_parse_dt() completes.
At the time of DT parsing, info->pctl_dev is still NULL, leading to
the invalid dereference of info->pctl_dev->dev.
Use the already available device pointer from platform_device
instead of accessing through uninitialized pctl_dev.
Fixes: d94a32ac68 ("pinctrl: canaan: k230: Fix order of DT parse and pinctrl register")
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
of_parse_phandle_with_args() returns a device_node pointer with refcount
incremented in gpiospec.np. The loop iterates through all phandles but
never releases the reference, causing a refcount leak on each iteration.
Add of_node_put() calls to release the reference after extracting the
needed arguments and on the error path when devm_kzalloc() fails.
This bug was detected by our static analysis tool and verified by my
code review.
Fixes: a1a277eb76 ("pinctrl: single: create new gpio function range")
Signed-off-by: Wei Li <unsw.weili@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
of_parse_phandle_with_fixed_args() increments the reference count of the
returned device node, so it must be explicitly released using
of_node_put() after use.
Fix the reference leak in aml_bank_pins() and aml_bank_number() by
adding the missing of_node_put() calls.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The i2s2_data function is available on both gpio12 and gpio13. Fix the
groups definition.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl_claim_hogs() is covered to report any error via message.
Since that it's not needed in the callers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
There are no users, drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260202103756.62138-3-marco.crivellari@suse.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260202103756.62138-2-marco.crivellari@suse.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The problem is that one value from drive-strength may match to more than
two different enum groups which lead to DT complaint, switch to use 'anyOf'
to fix this kind warning.
Fixes: c3efac0592 ("dt-bindings: pinctrl: spacemit: convert drive strength to schema format")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
lkp reported that GENERIC_PINCTRL can be select when its dependencies
are not. Swap the "depends on" out for "select", as is used in other
parts of the pinctrl core that are expected to be selected by drivers.
Fixes: 43722575e5 ("pinctrl: add generic functions + pins mapper")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601271725.gqlQ8Jl7-lkp@intel.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
This patch series adds a number of ACP7.0 match table entries that are
being used in customer products.
Some of the configurations are very similar so the series begins with
renaming and sorting the existing structures so that the end result is
easier to manage.
Merge series from Chris Morgan <macroalpha82@gmail.com>:
Add support for the Anbernic RG-DS Speaker Amplifiers. The Anbernic
RG-DS uses two AW87391 ICs at 0x58 and 0x5B on i2c2. However, the
manufacturer did not provide a firmware file, only a sequence of
register writes to each device to enable and disable them.
Add support for this *specific* configuration in the AW87390 driver.
Since we are relying on a device specific sequence I am using a
device specific compatible string. This driver does not currently
support the aw87391 for any other device as I have none to test
with valid firmware. Attempts to create firmware with the AwinicSCPv4
have not been successful.
Three dmem fixes from Chen Ridong addressing use-after-free, RCU warning,
and NULL pointer dereference issues introduced with the dmem controller.
All changes are confined to kernel/cgroup/dmem.c and can only affect dmem
controller users.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYES4Q4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQ3XAP92niQQAOj9ekLd9O9DnwA0KlkHKT30QO4oPJVR
0z0wuwEA4kY8/jUAWpKjxzmXse9m06MTvzfjuv/4k5IRnZ84cwY=
=ze/P
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three dmem fixes from Chen Ridong addressing use-after-free, RCU
warning, and NULL pointer dereference issues introduced with the dmem
controller.
All changes are confined to kernel/cgroup/dmem.c and can only affect
dmem controller users"
* tag 'cgroup-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/dmem: avoid pool UAF
cgroup/dmem: avoid rcu warning when unregister region
cgroup/dmem: fix NULL pointer dereference when setting max
Merge series from David Lechner <dlechner@baylibre.com>:
This series is adding support for SPI controllers and peripherals that
have multiple SPI data lanes (data lanes being independent sets of
SDI/SDO lines, each with their own serializer/deserializer).
This series covers this specific use case:
+--------------+ +---------+
| SPI | | SPI |
| Controller | | ADC |
| | | |
| CS0 |--->| CS |
| SCLK |--->| SCLK |
| SDO |--->| SDI |
| SDI0 |<---| SDOA |
| SDI1 |<---| SDOB |
| SDI2 |<---| SDOC |
| SDI3 |<---| SDOD |
+--------------+ +--------+
The ADC is a simultaneous sampling ADC that can convert 4 samples at the
same time. It has 4 data output lines (SDOA-D) that each contain the
data of one of the 4 channels. So it requires a SPI controller with 4
separate deserializers in order to receive all of the information at the
same time.
This should also work for the use case in [1] as well. (Some of the
patches in this series were already submitted there). In that case the
SPI controller is used kind of like it is two separate SPI controllers,
each with its own chip select, clock, and data lines.
[1]: https://lore.kernel.org/linux-spi/20250616220054.3968946-1-sean.anderson@linux.dev/
The DT bindings are a fairly straight-forward mapping of which pins on
the peripheral are connected to which pins on the controller. The SPI
core code parses this and makes the information available to drivers.
When a peripheral driver sees that multiple data lanes are wired up, it
can chose to use them when sending messages.
The SPI message API is a bit higher-level than just specifying the
number of data lines for a SPI transfer though. I did some research on
other SPI controllers that have this feature. They tend to be the kind
meant for connecting to two flash memory chips at the same time but can
be used more generically as well. They generally have the option to
either use one lane at a time (Sean's use case), or can mirror the same
data on multiple lanes (no users of this yet) or can perform striping
of a single data FIFO/DMA stream to/from the two lanes (our use case).
For now, the API assumes that if you want to do mirror/striping, then
you want to use all available data lanes. Otherwise, it just uses the
first data lane for "normal" SPI transfers.
'Commit a354f030db ("ASoC: qcom: q6asm: handle the responses
after closing")' attempted to ignore DSP responses arriving
after a stream had been closed.
However, those responses were still handled, causing lockups.
Fix this by unconditionally dropping all DSP responses associated with
closed data streams.
Signed-off-by: Cédric Bellegarde <cedric.bellegarde@adishatz.org>
Link: https://patch.msgid.link/20260102215225.609166-1-cedric.bellegarde@adishatz.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wcd-mbhc-v2 driver has unnecessary empty module_init and
module_exit functions. Remove them. Note that if a module_init function
exists, a module_exit function must also exist; otherwise, the module
cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131020111.46108-1-enelsonmoore@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During VF FLR the scratch registers could be cleared both by the
GuC and by the PF driver. Allow to retry more times once we find
out that the HXG header was cleared and wait at least 256ms before
resending the same message again to the GuC.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260127193727.601-7-michal.wajdeczko@intel.com
We shall resend H2G message after receiving NO_RESPONSE_RETRY reply,
but since GuC dropped that H2G due to some interim state, we should
give it a little time to stabilize. Wait before sending the same H2G
again, start with 1ms delay, then increase exponentially to 256ms.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260127193727.601-6-michal.wajdeczko@intel.com
