Reorder struct virtio_gpio_line fields to place the DMA buffers
(req/res) last.
This eliminates the padding from aligning struct size on
ARCH_DMA_MINALIGN.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-ID: <f1221bbc120df6adaba9006710a517f1e84a10b2.1767601130.git.mst@redhat.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The res and ires buffers in struct virtio_gpio_line and struct
vgpio_irq_line respectively are used for DMA_FROM_DEVICE via
virtqueue_add_sgs(). However, within these structs, even though these
elements are tagged as ____cacheline_aligned, adjacent struct elements
can share DMA cachelines on platforms where ARCH_DMA_MINALIGN >
L1_CACHE_BYTES (e.g., arm64 with 128-byte DMA alignment but 64-byte
cache lines).
The existing ____cacheline_aligned annotation aligns to L1_CACHE_BYTES
which is not always sufficient for DMA alignment. For example, with
L1_CACHE_BYTES = 32 and ARCH_DMA_MINALIGN = 128
- irq_lines[0].ires at offset 128
- irq_lines[1].type at offset 192
both in same 128-byte DMA cacheline [128-256)
When the device writes to irq_lines[0].ires and the CPU concurrently
modifies one of irq_lines[1].type/disabled/masked/queued flags,
corruption can occur on non-cache-coherent platforms.
Fix by using __dma_from_device_group_begin()/end() annotations on the
DMA buffers. Drop ____cacheline_aligned - it's not required to isolate
request and response, and keeping them would increase the memory cost.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-ID: <ba7e025a6c84aed012421468d83639e5dae982b0.1767601130.git.mst@redhat.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reorder struct virtio_vsock fields to place the DMA buffer (event_list)
last. This eliminates the padding from aligning the struct size on
ARCH_DMA_MINALIGN.
Message-ID: <ce44f61af415521e00ab7492aa16d3d19f00bd5e.1769632071.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260128154306.133047-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
[Why&How]
On amdgpu_dm_connector_destroy(), the driver attempts to cancel pending
HDMI HPD work without checking if the HDMI HPD is enabled.
Added a check that it is enabled before clearing it.
Fixes: 6a681cd903 ("drm/amd/display: Add an hdmi_hpd_debounce_delay_ms module")
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 17b2c526fd)
Remove __assume_ctx_lock() from lock initializers.
Implicitly asserting an active context during initialization caused
false-positive double-lock errors when acquiring a lock immediately after its
initialization. Moving forward, guarded member initialization must either:
1. Use guard(type_init)(&lock) or scoped_guard(type_init, ...).
2. Use context_unsafe() for simple initialization.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/57062131-e79e-42c2-aa0b-8f931cb8cac2@acm.org/
Link: https://patch.msgid.link/20260119094029.1344361-7-elver@google.com
Convert lock initialization to scoped guarded initialization where
lock-guarded members are initialized in the same scope.
This ensures the context analysis treats the context as active during member
initialization. This is required to avoid errors once implicit context
assertion is removed.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119094029.1344361-6-elver@google.com
Convert lock initialization to scoped guarded initialization where
lock-guarded members are initialized in the same scope.
This ensures the context analysis treats the context as active during member
initialization. This is required to avoid errors once implicit context
assertion is removed.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119094029.1344361-5-elver@google.com
Convert lock initialization to scoped guarded initialization where
lock-guarded members are initialized in the same scope.
This ensures the context analysis treats the context as active during
member initialization. This is required to avoid errors once implicit
context assertion is removed.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119094029.1344361-4-elver@google.com
Add scoped init guard definitions for common synchronization primitives
supported by context analysis.
The scoped init guards treat the context as active within initialization
scope of the underlying context lock, given initialization implies
exclusive access to the underlying object. This allows initialization of
guarded members without disabling context analysis, while documenting
initialization from subsequent usage.
The documentation is updated with the new recommendation. Where scoped
init guards are not provided or cannot be implemented (ww_mutex omitted
for lack of multi-arg guard initializers), the alternative is to just
disable context analysis where guarded members are initialized.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20251212095943.GM3911114@noisy.programming.kicks-ass.net/
Link: https://patch.msgid.link/20260119094029.1344361-3-elver@google.com
Jiri Olsa says:
====================
ftrace,bpf: Use single direct ops for bpf trampolines
hi,
while poking the multi-tracing interface I ended up with just one ftrace_ops
object to attach all trampolines.
This change allows to use less direct API calls during the attachment changes
in the future code, so in effect speeding up the attachment.
In current code we get a speed up from using just a single ftrace_ops object.
- with current code:
Performance counter stats for 'bpftrace -e fentry:vmlinux:ksys_* {} -c true':
6,364,157,902 cycles:k
828,728,902 cycles:u
1,064,803,824 instructions:u # 1.28 insn per cycle
23,797,500,067 instructions:k # 3.74 insn per cycle
4.416004987 seconds time elapsed
0.164121000 seconds user
1.289550000 seconds sys
- with the fix:
Performance counter stats for 'bpftrace -e fentry:vmlinux:ksys_* {} -c true':
6,535,857,905 cycles:k
810,809,429 cycles:u
1,064,594,027 instructions:u # 1.31 insn per cycle
23,962,552,894 instructions:k # 3.67 insn per cycle
1.666961239 seconds time elapsed
0.157412000 seconds user
1.283396000 seconds sys
The speedup seems to be related to the fact that with single ftrace_ops object
we don't call ftrace_shutdown anymore (we use ftrace_update_ops instead) and
we skip the synchronize rcu calls (each ~100ms) at the end of that function.
rfc: https://lore.kernel.org/bpf/20250729102813.1531457-1-jolsa@kernel.org/
v1: https://lore.kernel.org/bpf/20250923215147.1571952-1-jolsa@kernel.org/
v2: https://lore.kernel.org/bpf/20251113123750.2507435-1-jolsa@kernel.org/
v3: https://lore.kernel.org/bpf/20251120212402.466524-1-jolsa@kernel.org/
v4: https://lore.kernel.org/bpf/20251203082402.78816-1-jolsa@kernel.org/
v5: https://lore.kernel.org/bpf/20251215211402.353056-10-jolsa@kernel.org/
v6 changes:
- rename add_hash_entry_direct to add_ftrace_hash_entry_direct [Steven]
- factor hash_add/hash_sub [Steven]
- add kerneldoc header for update_ftrace_direct_* functions [Steven]
- few assorted smaller fixes [Steven]
- added missing direct_ops wrappers for !CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
case [Steven]
v5 changes:
- do not export ftrace_hash object [Steven]
- fix update_ftrace_direct_add new_filter_hash leak [ci]
v4 changes:
- rebased on top of bpf-next/master (with jmp attach changes)
added patch 1 to deal with that
- added extra checks for update_ftrace_direct_del/mod to address
the ci bot review
v3 changes:
- rebased on top of bpf-next/master
- fixed update_ftrace_direct_del cleanup path
- added missing inline to update_ftrace_direct_* stubs
v2 changes:
- rebased on top fo bpf-next/master plus Song's livepatch fixes [1]
- renamed the API functions [2] [Steven]
- do not export the new api [Steven]
- kept the original direct interface:
I'm not sure if we want to melt both *_ftrace_direct and the new interface
into single one. It's bit different in semantic (hence the name change as
Steven suggested [2]) and I don't think the changes are not that big so
we could easily keep both APIs.
v1 changes:
- make the change x86 specific, after discussing with Mark options for
arm64 [Mark]
thanks,
jirka
[1] https://lore.kernel.org/bpf/20251027175023.1521602-1-song@kernel.org/
[2] https://lore.kernel.org/bpf/20250924050415.4aefcb91@batman.local.home/
---
====================
Link: https://patch.msgid.link/20251230145010.103439-1-jolsa@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Using single ftrace_ops for direct calls update instead of allocating
ftrace_ops object for each trampoline.
With single ftrace_ops object we can use update_ftrace_direct_* api
that allows multiple ip sites updates on single ftrace_ops object.
Adding HAVE_SINGLE_FTRACE_DIRECT_OPS config option to be enabled on
each arch that supports this.
At the moment we can enable this only on x86 arch, because arm relies
on ftrace_ops object representing just single trampoline image (stored
in ftrace_ops::direct_call). Archs that do not support this will continue
to use *_ftrace_direct api.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-10-jolsa@kernel.org
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
Adding update_ftrace_direct_mod function that modifies all entries
(ip -> direct) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current modify_ftrace_direct is:
- hash argument that allows to modify multiple ip -> direct
entries at once
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-7-jolsa@kernel.org
Adding update_ftrace_direct_del function that removes all entries
(ip -> addr) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current unregister_ftrace_direct is
- hash argument that allows to unregister multiple ip -> direct
entries at once
- we can call update_ftrace_direct_del multiple times on the
same ftrace_ops object, becase we do not need to unregister
all entries at once, we can do it gradualy with the help of
ftrace_update_ops function
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-6-jolsa@kernel.org
Adding update_ftrace_direct_add function that adds all entries
(ip -> addr) provided in hash argument to direct ftrace ops
and updates its attachments.
The difference to current register_ftrace_direct is
- hash argument that allows to register multiple ip -> direct
entries at once
- we can call update_ftrace_direct_add multiple times on the
same ftrace_ops object, becase after first registration with
register_ftrace_function_nolock, it uses ftrace_update_ops to
update the ftrace_ops object
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-5-jolsa@kernel.org
We are going to use these functions in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-4-jolsa@kernel.org
Make alloc_and_copy_ftrace_hash to copy also direct address
for each hash entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-3-jolsa@kernel.org
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
snd_soc_register_dai() has lockdep_assert_held() (A), but
snd_soc_unregister_dai() doesn't have lockdep_assert_held() (B).
void snd_soc_unregister_dai(...)
{
(B) dev_dbg(...);
list_del(...);
}
struct snd_soc_dai *snd_soc_register_dai(...)
{
...
(A) lockdep_assert_held(&client_mutex);
...
}
Both functions should be called with client_mutex lock.
Add missing lockdep_assert_held() at snd_soc_unregister_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jyx21nu4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This increases build coverage and allows to drop an #ifdef.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Validate they exist in a JSON file from one directory found from one
directory above the model's JSON directory.
This avoids broken fallback encodings being created.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Breakdown cycles to user, kernel and guest. Add a common_metrics.py
file for such metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory bandwidth saturation from CBOX/CHA events present in
broadwellde, broadwellx, cascadelakex, haswellx, icelakex, skylakex
and snowridgex.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Break down UPI read and write bandwidth using uncore_upi counters.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Derive from CBOX/CHA occupancy and inserts the average latency as is
provided in Intel's uncore performance monitoring reference.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use occupancy events fixed in:
https://lore.kernel.org/lkml/20240226201517.3540187-1-irogers@google.com/
Metrics are at the socket level referring to cores, not hyperthreads.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Breakdown directory hit, misses and requests. The implementation uses
the M2M and CHA PMUs present in server models broadwellde, broadwellx
cascadelakex, emeraldrapids, icelakex, sapphirerapids and skylakex.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Breakdown local and remote memory bandwidth, read and writes.
The implementation uses the HA and CHA PMUs present in server models
broadwellde, broadwellx cascadelakex, emeraldrapids, haswellx, icelakex,
ivytown, sapphirerapids and skylakex.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Break down memory bandwidth using uncore counters. For many models
this matches the memory_bandwidth_* metrics, but these metrics aren't
made available on all models.
Add support for free running counters. Query the event JSON when
determining which what events/counters are available.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Number of outstanding load misses per cycle.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Metrics break down of floating point operations.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Metrics break down context switches for different kinds of
instruction.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the counter mask (cmask) to see how many cycles an instruction
takes to retire. Present as a set of ILP metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Give breakdown of number of instructions. Use the counter mask (cmask)
to show the number of cycles taken to retire the instructions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Give a breakdown of various L2 counters as metrics, including totals,
reads, hardware prefetcher, RFO, code and evictions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ports metric group contains a metric for each port giving its
utilization as a ratio of cycles.
The metrics are created by looking for UOPS_DISPATCHED.PORT events.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
