Add hardware registers and populate hw_regs field in
ath12k_wifi7_hw_ver_map for QCC2072. Note for some registers not
defined and not used by QCC2072, a magic value is assigned.
Also populate other fields to be the same with WCN7850. Among them,
however, QCC2072 requires different HAL ops and descriptor size, both
will be updated in upcoming patches.
Tested-on: QCC2072 hw1.0 PCI WLAN.COL.1.0-01560-QCACOLSWPL_V1_TO_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-7-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently ath12k_pull_mac_phy_cap_svc_ready_ext() assumes only one band
supported in each phy, hence it skips 5 GHz band if 2 GHz band support
is detected. This does not work for device which gets only one phy but
has both bands supported, such as QCC2072.
Change to check each band individually to fix this issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-6-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For single pdev device, 320 MHz bandwidth support is reported only in
capability of WMI_HOST_HW_MODE_SINGLE mode, hence commit d4e244c85e
("wifi: ath12k: enable 320 MHz bandwidth for 6 GHz band in EHT PHY
capability for WCN7850") relaxed the condition check in
ath12k_wmi_tlv_mac_phy_caps_ext() to allow SINGLE mode getting parsed in
ath12k_wmi_tlv_mac_phy_caps_ext_parse(). Since SINGLE mode is not assumed
to be preferred, the function returns unconditionally after parsing 320
MHz support.
This works for WCN7850 because it prefers another mode indeed, while it
breaks QCC2072 since it prefers SINGLE mode. Due to the unconditional
return, the subsequent EHT parsing is skipped. Consequently EHT related
features are disabled.
Refactor it by moving 320 MHz parsing to ath12k_wmi_tlv_mac_phy_caps_ext(),
before the mode checking. This makes the code more straightforward, and
work for both WCN7850 and QCC2072.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-5-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For single pdev device like WCN7850/QCC2072, preferred_hw_mode is
initialized to WMI_HOST_HW_MODE_SINGLE. Later when firmware sends
supported modes to host, each mode is compared with the initial one
and if the priority of the new mode is higher, update the parameter
and store mode capability.
For WCN7850, this does not result in issue, as one of the supported
mode indeed has a higher priority. However the only available mode of
QCC2072 at this stage is WMI_HOST_HW_MODE_SINGLE, which fails the
comparison, hence mode capability is not stored. Subsequently driver
initialization fails.
Fix it by accepting a mode with the same priority.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-4-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The entry of REO status ring of existing chips has a 64 bit TLV header,
hence below functions take a 64 bit TLV assumption by default
ath12k_wifi7_dp_rx_process_reo_status()
ath12k_wifi7_hal_reo_status_queue_stats()
ath12k_wifi7_hal_reo_flush_queue_status()
ath12k_wifi7_hal_reo_flush_cache_status()
ath12k_wifi7_hal_reo_unblk_cache_status()
ath12k_wifi7_hal_reo_flush_timeout_list_status()
ath12k_wifi7_hal_reo_desc_thresh_reached_status()
ath12k_wifi7_hal_reo_update_rx_reo_queue_status()
However this is not the case for QCC2072 of which the TLV is 32 bit.
Refactor above functions to prepare for QCC2072 support, this is done by
removing TLV length assumption and offloading TLV decoding work to a newly
added callback _reo_status_dec_tlv_hdr. This way each chip can register
its own handler hence can do the work accordingly.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-3-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The entry of REO CMD ring of existing chips has a 64 bit TLV header, hence
below functions take a 64 bit TLV assumption by default
ath12k_wifi7_hal_reo_init_cmd_ring()
ath12k_wifi7_hal_reo_cmd_queue_stats()
ath12k_wifi7_hal_reo_cmd_flush_cache()
ath12k_wifi7_hal_reo_cmd_update_rx_queue()
However this is not the case for QCC2072 of which the TLV is 32 bit,
meaning above functions don't work for it.
Rename/refactor above functions to prepare for QCC2072 support:
Rename the first one to ath12k_wifi7_hal_reo_init_cmd_ring_tlv64() to
better reflect what it is doing. There will be a 32 bit variant when
QCC2072 support is in place.
For the last ones, remove TLV length assumption and offload TLV encoding
work to a newly added callback _reo_cmd_enc_tlv_hdr. This way each chip
can register its own handler hence can do the work accordingly.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-2-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently offset of PCI window register address is defined as 0x310c which
is same across existing chips. However QCC2072 has a different offset
0x3278.
In order to make the window selection logic work for QCC2072 as well,
change to initialize this parameter per device at the probe time.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-1-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
".max_tx_ring" is an upper bounds to indexing ".tcl2wbm_rbm_map". It
is initialized in, core.c, a different file than the array. This
spaghetti-like relation is fragile and not obvious. Accidentally
setting ".max_tx_ring" too high leads to a hard to track out-of-
bounds access and memory corruption.
There is a small ambiguity on the meaning of "max_tx_ring":
- The highest ring, max=3 implies there are 4 rings (0, 1, 2, 3)
- The highest number to use for array indexing (there are 3 rings)
Clarify this dependency by moving ".max_tx_ring" adjacent to the array
".tcl2wbm_rbm_map", and name it "num_tx_rings". Use ARRAY_SIZE()
instead of #defines to initialize the length field.
The intent is to make the code easier to understand rather than fix
an existing bug.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251228151408.2116108-1-mr.nuke.me@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Firmware sends CFR meta data through the WMI event
WMI_PEER_CFR_CAPTURE_EVENT. Parse the meta data coming from the firmware
and invoke correlate_and_relay function to correlate the CFR meta data
with the CFR payload coming from the other WMI event
WMI_PDEV_DMA_RING_BUF_RELEASE_EVENT.
Release the buffer to user space once correlate and relay return
success.
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-7-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add handler for WMI_PDEV_DMA_RING_BUF_RELEASE_EVENT which indicates CFR
data availability in the DB ring.
Add CFR data processing from DB ring buffers. Use correlate_and_relay
API to match CFR data with metadata from WMI_PEER_CFR_CAPTURE_EVENT.
Release buffer to userspace through relayfs on successful correlation,
otherwise hold buffer waiting for matching WMI event from firmware.
Add new debug masks:
- ATH11K_DBG_CFR: Enables CFR-related debug logs.
- ATH11K_DBG_CFR_DUMP: Enables detailed CFR data dump for analysis.
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-6-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Provide a relayfs interface to collect the CFR dump from the user space.
'/sys/kernel/debug/ieee80211/phyX/ath11k/cfr_capture' is exposed to user
space to get CFR data.
CFR format to user space:
___________________________________________
| CFR header | CFR payload | CFR tail data |
|____________|_____________|_______________|
CFR header contains the following fields,
* Start magic number 0xDEADBEAF - 4 bytes
* vendor id - 4 bytes
* cfr metadata version - 1 byte
* cfr data version - 1 byte
* device type - 1 byte
* platform type - 1 byte
* CFR metadata length - 4 bytes
* metadata - 92 bytes
peer mac - 6 bytes
capture status - 1 byte (1 for success 0 for failure)
capture_bw - 1 byte
channel_bw - 1 byte
phy_mode - 1 byte
prim20_chan - 2 bytes
center_freq1 - 2 bytes
center_freq2 - 2 bytes
capture_mode - 1 byte
capture_type - 1 byte
sts_count - 1 byte
num_rx_chain - 1 byte
timestamp - 4 bytes
length - 4 bytes
chain_rssi - 32 bytes (4 bytes for each chain)
chain_phase - 16 bytes (2 bytes for each chain)
cfo_measurement - 4 bytes
agc_gain - 8 bytes (1 bytes for each chain)
rx_start_ts - 4 bytes
CFR payload:
CFR payload contains 8bytes of ucode header followed by the tone
information. Tone order is positive tones, followed by PHY memory
garbage, followed by negative tones. Dummy tones are uploaded to make
number of tones always integer number of 64. Number of tones is not
preamble type dependent.
Each CFR tone has 14-bit I component and 14-bit Q component and is sign
extended to 16-bit I/Q. Two tones are packed into one 64-bit unit as:
[63:0] = [Tone1_Q(63:48) Tone1_I(47:32) Tone0_Q(31:16) Tone0_I(15:0)]
CFR tail: end magic number 0xBEAFDEAD
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-5-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Provide debugfs interfaces support to config unassociated client CFR
from the user space.
To enable CFR capture for unassociated clients,
echo "<mac address> <val> <periodicity>"
> /sys/kernel/debug/ieee80211/phyX/ath11k/cfr_unassoc
Mac address: mac address of the client.
Val: 0 - start CFR capture
1 - stop CFR capture
Periodicity: Periodicity at which hardware is expected to collect CFR
dump.
0 - single shot capture.
non zero - for Periodic captures (value must be multiple of 10 ms)
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-4-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Provide debugfs interfaces support to config CFR from the user space.
To enable/disable cfr feature use command,
echo <val> > /sys/kernel/debug/ieee80211/phyX/ath11k/enable_cfr
where, val: 0 to disable CFR and 1 to enable CFR.
To enable CFR capture for associated peers,
echo "<val> <bw> <periodicity> <method>"
>
/sys/kernel/debug/ieee80211/phyX/netdev\:wlanx/stations/<mac>/cfr_capture
val: 0 - stop CFR capture
1 - start CFR capture
bw: CFR capture bandwidth
0 - 20MHZ
1 - 40MHZ
2 - 80MHZ
Periodicity: Periodicity at which hardware is expected to collect CFR
dump.
0 - single shot capture.
non zero - for Periodic captures (value must be multiple of 10 ms)
method: Method used by hardware to collect the CFR dump.
0 - from the ACKs of QOS NULL packets.
Also, send the required WMI commands to the firmware based on the CFR
configurations.
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-3-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Channel Frequency Response (CFR) module will be initialized only when
the following criteria passes:
* Enabled CFR support for the hardware through the hardware param
'cfr_support'
* WMI service enabled for the CFR support
'WMI_TLV_SERVICE_CFR_CAPTURE_SUPPORT'
Also, provide a configuration option CONFIG_ATH11K_CFR to enable CFR
feature support during the compilation time.
CFR module initialization includes Direct Buffer(DB) ring initialization
where hardware uses the DB ring buffers to copy CFR data to host.
Number of buffers and buffer size of the ring is based on the DB ring
capabilities advertised by the firmware through WMI service ready.
Also ring configurations are sent to firmware through
ath11k_dbring_wmi_cfg_setup().
Predefine ath11k_cfr_dma_hdr, ath11k_look_up_table, and ath11k_cfr
structs and fields for subsequent patches.
Tested-on: IPQ8074 hw2.0 PCI IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230082520.3401007-2-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 32f7b19668 ("wifi: ath12k: support MLO as well if single_chip_mlo_support flag is set")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-ath12-primary-link-wow-v1-1-3cf523dc09f0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Destroy the rhash_tbl before returning the error code.
Fixes: a88cf5f71a ("wifi: ath12k: Add hash table for ath12k_dp_link_peer")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/aUOw1J0TU4VgeXj6@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
pci_set_drvdata() is called twice in ath12k_pci_probe() with the
same pointer. Remove the earlier call so drvdata is set after
ath12k_base and ath12k_pci initialization is complete.
Having two calls might suggest that drvdata needs to be set early for
some reason, even though it is not used until after the 'ab' struct
ath12k_base is fully populated. Even though exact placement is
not critical, keeping a single pci_set_drvdata() at the end of
the initialization makes it clearer that drvdata points to a
fully initialized structure and avoids confusion for future changes.
Tested on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Alexander Minchev <adminchev@proton.me>
Link: https://patch.msgid.link/20251127072839.14167-2-adminchev@proton.me
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Correct a typo in the monitor mode comment where "it make" was mistakenly
used instead of "it doesn't make". The comment explains that the brief
period where monitor mode appears enabled before being removed is harmless
in practice.
Also, use more common phrase "in practice" instead of "in practise".
Signed-off-by: Chien Wong <m@xv97.com>
Link: https://patch.msgid.link/20251030143041.12027-1-m@xv97.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
STA fails to connect to a 6 GHz AP with the following errors:
ath11k_pci 0000:01:00.0: failed to handle chan list with power type 1
wlp1s0: deauthenticating from c8:a3:e8:dd:41:e3 by local choice (Reason: 3=DEAUTH_LEAVING)
ath11k_reg_handle_chan_list() treats the update as redundant and
returns -EINVAL. That causes the connection attempt to fail.
Avoid unnecessary validation during association. Apply the regulatory
redundant check only when the power type is IEEE80211_REG_UNSET_AP,
which only occurs during core initialization.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108034607.812885-1-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Z16 Gen1 has the wakeup-from-suspend issues from [1] but was never added
to the appropriate quirk list. I've tested this patch on top of 6.18.2,
it fixes the issue for me on 21D4
Mark Pearson provided the other product IDs covering the second Z16 Gen1
and both Z13 Gen1 identifiers. They share the same firmware, and folks
in the bugzilla report do indeed see the problem on Z13.
[1] - https://bugzilla.kernel.org/show_bug.cgi?id=219196
Signed-off-by: Ross Vandegrift <ross@kallisti.us>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/wj7o2kmb7g54stdjvxp2hjqrnutnq3jbf4s2uh4ctvmlxdq7tf@nbkj2ebakhrd
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
scripts/kernel-doc.py reports 51 kernel-doc warnings in wil6210.h.
Fix all kernel-doc warnings reported in wil6210.h.
Several comments are changed from "/**" to "/*" since it appears that
"/**" was used for many non-kernel-doc comments.
- add kernel-doc for missing function parameters
- add one function "Returns:"
- correct kernel-doc struct name to match actual struct name in 2 places
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251117020213.443126-1-rdunlap@infradead.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The conversion to OF missed adding a Kconfig dependency.
Fixes: 2fa490c0d7 ("wifi: ath9k: ahb: replace id_table with of")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250802000432.3079550-1-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Modify kernel-doc comments in common-debug.h to avoid warnings:
Warning: drivers/net/wireless/ath/ath9k/common-debug.h:21 bad line:
may have had errors.
Warning: ../drivers/net/wireless/ath/ath9k/common-debug.h:23 bad line:
may have had errors.
Warning: ../drivers/net/wireless/ath/ath9k/common-debug.h:26 bad line:
decryption process completed
Warning: ../drivers/net/wireless/ath/ath9k/common-debug.h:28 bad line:
encountered an error
Fixes: 99c15bf575 ("ath9k: Report total tx/rx bytes and packets in debugfs.")
Fixes: 1395d3f00a ("ath9k: Add debugfs file for RX errors")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251117020251.447692-1-rdunlap@infradead.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Repair "bad line" warnings by starting each line with " *".
Add or correct kernel-doc entries for missing struct members in
struct ath_tx_stats.
Warning: ../drivers/net/wireless/ath/ath9k/debug.h:144 bad line:
may have had errors.
Warning: ../drivers/net/wireless/ath/ath9k/debug.h:146 bad line:
may have had errors.
Warning: ../drivers/net/wireless/ath/ath9k/debug.h:156 bad line:
Valid only for:
Warning: ../drivers/net/wireless/ath/ath9k/debug.h:157 bad line:
- non-aggregate condition.
Warning: ../drivers/net/wireless/ath/ath9k/debug.h:158 bad line:
- first packet of aggregate.
Warning: drivers/net/wireless/ath/ath9k/debug.h:191 struct member
'xretries' not described in 'ath_tx_stats'
Warning: drivers/net/wireless/ath/ath9k/debug.h:191 struct member
'data_underrun' not described in 'ath_tx_stats'
Warning: drivers/net/wireless/ath/ath9k/debug.h:191 struct member
'delim_underrun' not described in 'ath_tx_stats'
Fixes: 99c15bf575 ("ath9k: Report total tx/rx bytes and packets in debugfs.")
Fixes: fec247c0d5 ("ath9k: Add debug counters for TX")
Fixes: 5a6f78afda ("ath9k: show excessive-retry MPDUs in debugfs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251117020304.448687-1-rdunlap@infradead.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add a description for ATH5K_DEBUG_ANI and delete the descriptions for
3 undefined enum descriptions to prevent these warnings:
Warning: drivers/net/wireless/ath/ath5k/debug.h:111 Enum value
'ATH5K_DEBUG_ANI' not described in enum 'ath5k_debug_level'
Warning: drivers/net/wireless/ath/ath5k/debug.h:111 Excess enum value
'%ATH5K_DEBUG_DUMP_RX' description in 'ath5k_debug_level'
Warning: drivers/net/wireless/ath/ath5k/debug.h:111 Excess enum value
'%ATH5K_DEBUG_DUMP_TX' description in 'ath5k_debug_level'
Warning: drivers/net/wireless/ath/ath5k/debug.h:111 Excess enum value
'%ATH5K_DEBUG_TRACE' description in 'ath5k_debug_level'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251128010401.546506-1-rdunlap@infradead.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Simplify the binding by combining two if:then: clauses which have
exactly the same conditional part.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251230114835.52504-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The Kconfig menu entry was converted to a menuconfig to allow it to be
hidden for !CONFIG_RISCV. The drivers under this new option were selected
by some other Kconfig symbols and so an extra select CACHEMAINT_FOR_DMA is
needed.
Fixes: 4d1608d0ab ("cache: Make top level Kconfig menu a boolean dependent on RISCV")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512100411.WxJU2No9-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251210160047.201379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add a GPL-2.0 license identifier line for this file.
kmod.c was originally introduced in the kernel in February
of 1998 by Linus Torvalds - who was familiar with kernel
licensing at the time this was introduced.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the driver's device private data is allocated and initialized
from driver core code called from bus abstractions after the driver's
probe() callback returned the corresponding initializer.
Similarly, the driver's device private data is dropped within the
remove() callback of bus abstractions after calling the remove()
callback of the corresponding driver.
However, commit 6f61a2637a ("rust: device: introduce
Device::drvdata()") introduced an accessor for the driver's device
private data for a Device<Bound>, i.e. a device that is currently bound
to a driver.
Obviously, this is in conflict with dropping the driver's device private
data in remove(), since a device can not be considered to be fully
unbound after remove() has finished:
We also have to consider registrations guarded by devres - such as IRQ
or class device registrations - which are torn down after remove() in
devres_release_all().
Thus, it can happen that, for instance, a class device or IRQ callback
still calls Device::drvdata(), which then runs concurrently to remove()
(which sets dev->driver_data to NULL and drops the driver's device
private data), before devres_release_all() started to tear down the
corresponding registration. This is because devres guarded registrations
can, as expected, access the corresponding Device<Bound> that defines
their scope.
In C it simply is the driver's responsibility to ensure that its device
private data is freed after e.g. an IRQ registration is unregistered.
Typically, C drivers achieve this by allocating their device private data
with e.g. devm_kzalloc() before doing anything else, i.e. before e.g.
registering an IRQ with devm_request_threaded_irq(), relying on the
reverse order cleanup of devres.
Technically, we could do something similar in Rust. However, the
resulting code would be pretty messy:
In Rust we have to differentiate between allocated but uninitialized
memory and initialized memory in the type system. Thus, we would need to
somehow keep track of whether the driver's device private data object
has been initialized (i.e. probe() was successful and returned a valid
initializer for this memory) and conditionally call the destructor of
the corresponding object when it is freed.
This is because we'd need to allocate and register the memory of the
driver's device private data *before* it is initialized by the
initializer returned by the driver's probe() callback, because the
driver could already register devres guarded registrations within
probe() outside of the driver's device private data initializer.
Luckily there is a much simpler solution: Instead of dropping the
driver's device private data at the end of remove(), we just drop it
after the device has been fully unbound, i.e. after all devres callbacks
have been processed.
For this, we introduce a new post_unbind() callback private to the
driver-core, i.e. the callback is neither exposed to drivers, nor to bus
abstractions.
This way, the driver-core code can simply continue to conditionally
allocate the memory for the driver's device private data when the
driver's initializer is returned from probe() - no change needed - and
drop it when the driver-core code receives the post_unbind() callback.
Closes: https://lore.kernel.org/all/DEZMS6Y4A7XE.XE7EUBT5SJFJ@kernel.org/
Fixes: 6f61a2637a ("rust: device: introduce Device::drvdata()")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-7-dakr@kernel.org
[ Remove #ifdef CONFIG_RUST, rename post_unbind() to post_unbind_rust().
- Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add an associated type DriverData to the DriverLayout trait indicating
the type of the driver's device private data.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add an associated const DEVICE_DRIVER_OFFSET to the DriverLayout trait
indicating the offset of the embedded struct device_driver within
Self::DriverType, i.e. the specific driver structs, such as struct
pci_driver or struct platform_driver.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The DriverLayout trait describes the layout of a specific driver
structure, such as `struct pci_driver` or `struct platform_driver`.
In a first step, this replaces the associated type RegType of the
RegistrationOps with the DriverLayout::DriverType associated type.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-4-dakr@kernel.org
[ Rename driver::Driver to driver::DriverLayout, as it represents the
layout of a driver structure rather than the driver structure itself.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We do not actually test the bpf_override_return helper functionality
itself at the moment, only the bpf program being able to attach it.
Adding test that override prctl syscall return value on top of
kprobe and kprobe.multi.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-2-jolsa@kernel.org
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
- Fix allocation accounting on boot up
The ftrace records for each function that ftrace can attach to is
done in a group of pages. At boot up, the number of pages are
calculated and allocated. After that, the pages are filled with data.
It may allocate more than needed due to some functions not being
recorded (because they are unused weak functions), this too is
recorded.
After the data is filled in, a check is made to make sure the right
number of pages were allocated. But this was off due to the
assumption that the same number of entries fit per every page.
Because the size of an entry does not evenly divide into PAGE_SIZE,
there is a rounding error when a large number of pages is allocated
to hold the events. This causes the check to fail and triggers a
warning.
Fix the accounting by finding out how many pages are actually
allocated from the functions that allocate them and use that to see
if all the pages allocated were used and the ones not used are
properly freed.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaWlyoxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoZoAQDuPOaly/RM9cS70zngDo/UsZmi2lQL
RxuMR7sPVMwkrAEAp/gnpJenSRxCzaO4EdQYUYI28/ihkdNGp3KG8Q2MNw0=
=v899
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
- Fix allocation accounting on boot up
The ftrace records for each function that ftrace can attach to is
done in a group of pages. At boot up, the number of pages are
calculated and allocated. After that, the pages are filled with data.
It may allocate more than needed due to some functions not being
recorded (because they are unused weak functions), this too is
recorded.
After the data is filled in, a check is made to make sure the right
number of pages were allocated. But this was off due to the
assumption that the same number of entries fit per every page.
Because the size of an entry does not evenly divide into PAGE_SIZE,
there is a rounding error when a large number of pages is allocated
to hold the events. This causes the check to fail and triggers a
warning.
Fix the accounting by finding out how many pages are actually
allocated from the functions that allocate them and use that to see
if all the pages allocated were used and the ones not used are
properly freed.
* tag 'ftrace-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Do not over-allocate ftrace memory
RGMU a.k.a Reduced Graphics Management Unit is a small state machine
with the sole purpose of providing IFPC (Inter Frame Power Collapse)
support. Compared to GMU, it doesn't manage GPU clock, voltage
scaling, bw voting or any other functionalities. All it does is detect
an idle GPU and toggle the GDSC switch. As it doesn't access DDR space,
it doesn't require iommu.
So far, only Adreno 612 GPU has an RGMU core. Document it in
qcom,adreno-rgmu.yaml.
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696679/
Message-ID: <20251231-qcs615-spin-2-v6-4-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A612 GPU has a new IP called RGMU (Reduced Graphics Management Unit)
which replaces GMU. But it doesn't do clock or voltage scaling. So we
need the gpu core clock in the GPU node along with the power domain to
do clock and voltage scaling from the kernel. Update the bindings to
describe this GPU.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696676/
Message-ID: <20251231-qcs615-spin-2-v6-3-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
JSON Schema conditionals can become complex and error-prone when combined
with regex patterns. To improve readability and maintainability, replace
nested if-else blocks with a flattened structure using explicit enums.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696674/
Message-ID: <20251231-qcs615-spin-2-v6-2-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Some GPUs like A612 doesn't use a named register range resource. This
is because the reg-name property is discouraged when there is just a
single resource.
To address this, retrieve the 'gmu' register range by its index. It is
always guaranteed to be at index 0.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696673/
Message-ID: <20251231-qcs615-spin-2-v6-1-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The volatile keyword is no longer necessary or useful on aes_sbox and
aes_inv_sbox, since the table prefetching is now done using a helper
function that casts to volatile itself and also includes an optimization
barrier. Since it prevents some compiler optimizations, remove it.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-36-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that all callers of the aes_encrypt() and aes_decrypt() type-generic
macros are using the new types, remove the old functions.
Then, replace the macro with direct calls to the new functions, dropping
the "_new" suffix from them.
This completes the change in the type of the key struct that is passed
to aes_encrypt() and aes_decrypt().
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-35-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-34-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-33-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-32-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
This driver used crypto_aes_ctx::key_enc, but only to access the copy of
the raw key that is stored at the beginning of the expanded key. To
eliminate the dependency on this field, instead just access the raw key
directly, which is already available in the relevant functions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-31-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-30-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-29-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_key and struct
aes_enckey). In encryption-only use cases, this eliminates the
unnecessary computation and caching of the decryption round keys. The
new AES en/decryption functions are also much faster and use AES
instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one. Likewise
for decryption.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-28-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
