[why]
remove the forcevrr related which are not used any more.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract common allocation and setup patterns from KUnit test
files into a dedicated helpers module to reduce duplication.
Add tests/amdgpu_dm_kunit_helpers.c with shared helpers:
- dm_kunit_alloc_adev: allocate amdgpu_device via DRM mock
- dm_kunit_alloc_link: allocate zeroed dc_link
- dm_kunit_alloc_link_with_ctx: allocate dc_link with dc_context
- dm_kunit_alloc_dm: allocate display_manager with DC state
- dm_kunit_alloc_stream: allocate dc_stream_state with link
- dm_kunit_add_stream_to_state: wire stream into dc_state
- dm_kunit_alloc_connector: allocate connector wired to device
Update 10 test files to use the shared helpers, removing
duplicated local alloc_test_adev, alloc_test_link,
alloc_test_dm, alloc_test_stream, and add_test_stream
functions.
Add missing MODULE_DESCRIPTION() macro to suppress modpost warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in
amdgpu_dm_kunit_helpers.o
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Writeback completion is detected in dm_crtc_high_irq(), the CRTC vblank
IRQ handler. The arm path (dm_set_writeback) never took a vblank
reference, so the interrupt was only enabled incidentally (by a pageflip
on the same commit, fbcon, or a previous vblank's off-delay window).
A writeback-only commit right after a fresh drm_crtc_vblank_on() (e.g. a
writeback connector detached and re-attached) therefore has no vblank
reference: the IRQ never fires, wb_pending is never cleared and the out
fence times out. This is reproducible with IGT kms_writeback and was
seen via kms_colorop on writeback-capable hardware. The relevant IGT
branch is at
https://gitlab.freedesktop.org/hwentland/igt-gpu-tools/-/tree/yuv-fm-colorop
Take a vblank reference when arming the writeback and release it once
completion is signalled. The get is done before arming wb_pending so the
completion IRQ cannot drop the reference before it is taken. Factor the
shared completion bookkeeping into amdgpu_dm_crtc_complete_writeback()
and also call it from the teardown path, so a writeback torn down while
still pending signals its out fence and releases the reference instead of
leaking both.
Fixes: c81e13b929 ("drm/amd/display: Hande writeback request from userspace")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for amdgpu_dm_set_replay_caps(),
amdgpu_dm_link_setup_replay(), and amdgpu_dm_replay_set_event()
including happy-path tests that exercise the configuration logic,
coasting vtotal calculations, and early-return when replay events
are already in the desired state.
Assisted-by: Copilot:Claude-Opus-4.6 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit test with DRM mock for amdgpu_dm_wb_connector_init().
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert due to regression.
This reverts commit e82936e8da.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
mod_hdcp_dump_binary_message() computed target_size (a uint32_t) as roughly
byte_size * msg_size and gated the whole write on buf_size >= target_size. A
large msg_size can overflow target_size, wrapping it to a small value that
passes the check while the loop still writes byte_size * msg_size bytes
into buf. All current callers pass small constants so this is not reachable
today, but the unchecked arithmetic should be hardened.
[How]
Drop the overflow-prone target_size precomputation and instead bounds-check the
output position on every iteration, stopping once the next entry would not leave
room for the trailing terminator. This cannot overflow and, for oversized
messages, dumps as much as fits rather than printing nothing.
Fixes: 4c283fdac0 ("drm/amd/display: Add HDCP module")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() copies p_notify->aux_reply.length
bytes into payload->data without clamping. payload->data is typically a 16-byte
DPCD scratch buffer, while aux_reply.length is echoed from the sink via the DMUB
ring. While this is clamped by DMUB it's prudent to ensure we validate
this in the driver as well.
[How]
Clamp the copy to sizeof(aux_reply.data), the scratch buffer the reply was read
into, and use that for both the memcpy and the return value. For regular
transfers additionally clamp to payload->length to cover callers whose
destination buffer is smaller than 16 bytes. The write-status-update retry path
(dce_aux_transfer_with_retries) deliberately zeroes payload->length while still
expecting the partial-write status byte, so that bound is skipped in that case
to avoid dropping the reply. Also guard against a NULL payload->data.
Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Bandwidth clock programming build and execution phases were coupled,
preventing the HWSS from orchestrating them through block sequencing.
[how]
Separate clock programming into build and execute phases across
latest versions. Build phase populates the clk_mgr internal block
sequence array, then registers a single CLK_MGR_UPDATE_CLOCKS HWSS step.
Execute phase dispatches the pre-built sequence. Add HWSS operations for
clk_mgr_set_max_memclk, hubbub_program_watermarks, hubbub_program_arbiter,
and hubbub_program_compbuf_segments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
The register spec headers are duplicated in the external asic_reg path and maintaining a local copy is unnecessary.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
amdgpu_dm_plane_fill_blending_from_plane_state added drm_to_adev() but
dm_test_fill_blending_global_alpha did not initialize
plane_state->plane, causing a NULL pointer dereference.
[HOW]
Add an amdgpu_device and drm_plane so the plane->dev
dereference is valid in the test.
Fixes: 829769f1cf ("drm/amd/display: scale plane global alpha to 12 bits on DCN 4.2")
Cc: PingLei.Lin@amd.com
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On DCN 4.2 the global alpha is reported using 12 bits
(MPCC_GLOBAL_ALPHA spans bits [0:11]), whereas other ASICs such as
DCN 3.1.4 use an 8-bit field (MPCC_GLOBAL_ALPHA spans bits
[16:23]). The DRM plane alpha property is 16-bit and amdgpu_dm
unconditionally scaled it down by >> 8, which only matches the 8-bit
hardware field. On DCN 4.2 this fed a value that was 4 bits too small
into the 12-bit field, so the hardware applied the wrong global alpha
and the resulting blended output did not match the expected hw * alpha
value.
[how]
Detect DCN 4.2 via amdgpu_ip_version(adev, DCE_HWIP, 0) and scale the
16-bit plane alpha by >> 4 to fill the 12-bit MPCC_GLOBAL_ALPHA field.
All other ASICs keep the existing >> 8 behavior for their 8-bit field.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <PingLei.Lin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Use an early guard for invalid DMUB notify callback registration inputs.
This keeps the same accepted and rejected cases while removing the
redundant else block.
Assisted-by: Copilot:GPT-5
Reviewed-by: Chen-Yu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Use direct boolean in connector and IRQ code paths. This removes
redundant comparisons around MST state, IRQ validation, handler
removal, and DMUB notification offload without changing behavior.
Assisted-by: Copilot:GPT-5
Reviewed-by: Chen-Yu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add kunit tests for some functions in amdgpu_dm_plane.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for amdgpu_dm_initialize_default_pipeline()
using an amdgpu_device-backed DRM mock so drm_to_adev() and
the DC color capability checks are exercised.
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Extract shared backlight device index lookup and property
setup into testable helpers. The duplicated bd-to-index
scan in update_status/get_brightness is replaced by
amdgpu_dm_backlight_get_device_index(), and the inline
backlight_properties calculation is replaced by
amdgpu_dm_backlight_fill_props().
Add KUnit coverage for both new helpers. Keep the runtime
power_supply_is_system_supplied() call at the caller so
the helpers remain pure and deterministic under test.
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The compound condition checking dp_connector_no_native_i2c
and no_ddc_pin was duplicated across many files, obscuring
intent at every call site.
[How]
Add bool force_i2c_over_aux to struct dc_link, initialized
once during link creation. Add link_get_ddc_aux_inst()
helper to select the correct aux instance. Wire into
link_service via construct_link_service_ddc(). Replace all
duplicated condition checks and aux instance selection
blocks with the new field and helper. No functional change.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Added link bw to switch case
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set_queue_properties_from_criu() divided the checkpointed control stack
size by NUM_XCC(adev->gfx.xcc_mask) (whole GPU), while the checkpoint
size was recorded, the MQD buffer allocated, and the control stack
restored using the per-node mask NUM_XCC(mm->dev->xcc_mask). On spatially
partitioned GFX9.4.3 (CPX/QPX) these differ, so the per-XCC control stack
size used for the restore memcpy could exceed the region sized for the
MQD allocation, writing past the BO into adjacent kernel memory; it also
broke legitimate restore on partitioned parts.
Divide by the per-node XCC count so allocation and copy agree,
leaving kfd_queue_acquire_buffers() to bound the size against
the node's advertised control stack size.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 36b6c723d8.
It introduced a regression on gfx11: the kfd negative test failed.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for GFX9.4.2 and above.
-v2: keep APU with GTT allocation
-v3: use dev->adev->apu_prefer_gtt instead
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Vladimir Indic <vladimir.indic@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change allows amdgpu_amdkfd_gpuvm_map_bo_to_kernel() to pin buffers
in either GTT or VRAM based on caller specification, providing flexibility
for different memory placement requirements across various kernel buffers.
The domain parameter accepts AMDGPU_GEM_DOMAIN_GTT, AMDGPU_GEM_DOMAIN_VRAM,
or their combination (GTT|VRAM) to let amdgpu_bo_pin() choose the optimal
placement via amdgpu_bo_get_preferred_domain(). This flexible validation
allows callers to specify their preference while delegating final placement
decisions to the driver when appropriate.
CPU visibility is automatically enforced by amdgpu_bo_pin() regardless of
the domain parameter (see amdgpu_bo_pin() line 975-976 which sets
AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED for kernel mappings).
-v3: update amdgpu_amdkfd_gpuvm_map_bo_to_kernel description
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Vladimir Indic <vladimir.indic@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5406
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When creating an user-queue, the user space
provides a doorbell BO handle and an offset within
the bo to obtain a doorbell.
However current implementation using xa_store_irq()
to store a doorbell, which allows a later queue created
with the same BO and offset parameters to overwrite an
existing queue and doorbell mapping.
This can cause problems like misrouting fence IRQ
processing to a wrong queue, and mislead the cleanup
process of one queue erasing the mapping of another queue.
This commit fixes this issue by replacing xa_store_irq with
xa_insert_irq, which rejects mapping a reserved
doorbell to a newly created queue
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_xcp_select_scheds() reads the per-XCP scheduler list.
Partition switching rebuilds the same table under xcp_lock.
Take xcp_lock around XCP scheduler selection and release.
This prevents readers from observing partially rebuilt state.
Also revalidate the selected XCP id before indexing the table.
An open file can outlive a switch to another partition mode.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range.
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vddInd and vddcInd fields from VBIOS-parsed tables are used to index into
voltage lookup tables without a bounds check. Return -EINVAL when any
index is out of range.
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Tonga PPTable parsing also relies on VBIOS offsets, revision fields
and entry counts for several subtables. Malformed data can cause
out-of-bounds reads, while voltage lookup tables can overrun their
fixed-size destination arrays.
Add common bounds helpers and validate fixed subtables, dynamic entry
arrays and revision-specific layouts before consuming voltage lookup,
dependency, PCIE, power-tune, hard-limit, thermal, fan, GPIO, PPM and
VCE state data.
v2:
correct to handle get_tonga_ppm_table() return value.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Vega10 PPTable parsing uses VBIOS-provided offsets, revision fields
and entry counts to locate subtables. Malformed data can otherwise
drive out-of-bounds reads from soft_pp_table_size, and voltage lookup
tables can overrun their fixed-size destination arrays.
Add shared bounds helpers and validate fixed-size subtables, dynamic
entry arrays and revision-specific layouts before consuming thermal,
fan, power-tune, clock dependency, PCIE, hard-limit and voltage lookup
data.
v2:
if ucRevId is not matched, fallback to default table size instead of returning -EINVAL.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
processpptables.c walks several variable-length PPLIB tables by
using offsets from the VBIOS PowerPlay table. Some paths dereference
extended headers, state arrays, clock arrays, non-clock arrays, or VCE
records before checking that the referenced data is inside the table
buffer.
Add local bounds helpers and validate the relevant offsets and entry
sizes before dereferencing them. This prevents truncated or malformed
legacy PowerPlay tables from driving out-of-bounds reads during hwmgr
initialization and table entry lookup.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Vega hwmgr PowerPlay table parsers read fixed table fields,
state array entries, or SMC PPT fields before validating that the
VBIOS table buffer covers those structures. A truncated table can
therefore lead to out-of-bounds reads during hwmgr initialization.
Reject tables smaller than the fixed PowerPlay table. For Vega10, also
validate the state array offset and entry range before dereferencing
the state array.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
process_pptables_v1_0.c builds the Tonga state array pointer
from usStateArrayOffset before checking that the table buffer covers
the referenced data. A truncated PowerPlay table can therefore lead to
out-of-bounds reads while validating the state array.
Validate the fixed table size first, then check the state array offset
and entry range before dereferencing the state array.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary SIGNAL_TYPE_HDMI_TYPE_A check that was performed in the
drm_mode_is_420_only() case, but not in the drm_mode_is_420_also() &&
force_yuv420_output case.
Without further knowledge if YCbCr 4:2:0 is supported outside of HDMI,
there is no reason to use RGB when the display
reports drm_mode_is_420_only() even on a non HDMI connection.
This patch also moves both checks in the same if-case. This eliminates an
extra else-if-case.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Tested-by: Andri Yngvason <andri@yngvason.is>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mode-setting pipeline can disabled damage clippings for a commit
by setting ignore_damage_clips in struct drm_plane_state. The commit
will then do a full display update.
Test the flag in DCN code and do a full update in DCN code if it has
been set.
Commit 35ed38d582 ("drm: Allow drivers to indicate the damage helpers
to ignore damage clips") introduced ignore_damage_clips to selectively
ignore damage clipping in certain framebuffer changes. This driver does
not do that, but DRM's damage iterator will soon rely on the flag.
Therefore supporting it here as well make sense for consistency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 35ed38d582 ("drm: Allow drivers to indicate the damage helpers to ignore damage clips")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zackr@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same write-OOB and read-OOB as the Tonga fix, across seven Vega10 sub-table
parsers: get_vddc_lookup_table(), get_mm_clock_voltage_table(),
get_socclk/mclk/gfxclk/pixclk/dcefclk_voltage_dependency_table().
The GFXCLK table selects the correct record size per revision.
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ucNumEntries in the Tonga/Polaris PowerPlay sub-tables is used as both the
kzalloc count and loop bound without validation, allowing a crafted VBIOS
to overflow the destination heap object and read past the VBIOS image.
Clamp via pp_entries_max() in get_vddc_lookup_table(),
get_mclk_voltage_dependency_table(), get_sclk_voltage_dependency_table()
and get_mm_clock_voltage_table().
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a static inline that returns the maximum safe record count for a
PowerPlay sub-table, bounded by the lesser of soft_pp_table_size and
adev->bios_size. Uses adev->bios directly to avoid a dependency on
struct atom_context. Subsequent patches use it to clamp ucNumEntries.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table.
Fixes: c82baa2818 ("drm/amd/powerplay: add Tonga dpm support (v3)")
Fixes: 0d2c7569e1 ("drm/amdgpu: add new atomfirmware based helpers for powerplay")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
Fixes: 9d0af8b4de ("drm/amdgpu: pre-map device buffer as cached for A+A config")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check sel_xcp_id before its use
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy powerplay path used to allocate hardcode_pp_table from
the original VBIOS PPTable size, copy only the uploaded bytes into it,
and keep soft_pp_table_size unchanged. If a custom PPTable is shorter
than the original table, later code can still treat the stale tail as
valid table data.
Treat the uploaded buffer as the complete custom PPTable: duplicate the
uploaded buffer directly, replace hardcode_pp_table atomically, and set
soft_pp_table_size to the uploaded size.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_sys_set_pp_table() reads usStructureSize from the uploaded
pp_table buffer before validating that the buffer contains a complete
ATOM_COMMON_TABLE_HEADER. A short write can therefore make the driver
read past the supplied sysfs buffer.
Reject empty or header-short uploads before dereferencing the header
pointer.
Keep the existing structure-size check for the full uploaded table.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds queue reset support in KFD topology for gfx12.0.0 and
gfx12.0.1 on non-sriov mode.
Signed-off-by: Amber Lin <amber.lin@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
