Preinitialize the return value, and break out the for loop in
module_finalize() in case of an error to get rid of an ifdef.
This makes it easier to add additional code, which may also depend
on config options.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since the rework of the kernel virtual address space [1] the module area
and the kernel image are within the same 4GB area. Therefore there is no
need for the weak per cpu workaround for modules anymore. Remove it.
[1] commit c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Harald Freudenberger says:
====================
Support for driver override on AP queues.
Add a new sysfs attribute driver_override the AP queue's directory. Writing
in a string overrides the default driver determination and the drivers are
matched against this string instead. This overrules the driver binding
determined by the apmask/aqmask bitmask fields. With the write to the
attribute a check is done if the queue is in use by an mdev device.
If this is true, the write is aborted and EBUSY is returned.
As there exists some tooling for this kind of driver_override
(see package driverctl) the AP bus behavior for re-binding
should be compatible to this. The steps for a driver_override are:
1) unbind the current driver from the device. For example
echo "17.0005" > /sys/devices/ap/card17/17.0005/driver/unbind
2) set the new driver for this device in the sysfs
driver_override attribute. For example
echo "vfio_ap" > /sys//devices/ap/card17/17.0005/driver_override
3) trigger a bus reprobe of this device. For example
echo "17.0005" > /sys/bus/ap/drivers_probe
With the driverctl package this is more comfortable and
the settings get persisted:
driverctl -b ap set-override 17.0005 vfio_ap
and unset with
driverctl -b ap unset-override 17.0005
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a restriction for the driver_override feature versus apmask
and aqmask:
- driver_override is only allowed when the apmask and aqmask values
both are default (=0xffff..ffff).
- apmask and aqmask modifications are only allowed when there is no
driver_override on any AP device active.
So in the end the user is restricted to choose to either use
apmask/apmask to divide the AP devices into host owned and vfio owned
or use the driver_override feature but not mix these two approaches.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The mutex ap_perms_mutex was already used not only for protection
of the struct ap_perms ap_perms variable but also for an consistent
update of the AP bus sysfs attributes apmask and aqmask.
So rename this mutex to ap_attr_mutex which better reflects the
current use. This is also a preparation for an upcoming patch which
will use this mutex to lock updates on a new sysfs attribute.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a new sysfs attribute driver_override the AP queue's
directory. Writing in a string overrides the default driver
determination and the drivers are matched against this string
instead. This overrules the driver binding determined by the
apmask/aqmask bitmask fields.
According to the common understanding of how the driver_override
behavior shall work, there is no further checking done. Neither about
the string which is given as override driver nor if this device is
currently in use by an mdev device. Another patch may limit this
behavior to refuse a mixed usage of the driver_override and
apmask/aqmask feature.
As there exists some tooling for this kind of driver_override
(see package driverctl) the AP bus behavior for re-binding
should be compatible to this. The steps for a driver_override are:
1) unbind the current driver from the device. For example
echo "17.0005" > /sys/devices/ap/card17/17.0005/driver/unbind
2) set the new driver for this device in the sysfs
driver_override attribute. For example
echo "vfio_ap" > /sys//devices/ap/card17/17.0005/driver_override
3) trigger a bus reprobe of this device. For example
echo "17.0005" > /sys/bus/ap/drivers_probe
With the driverctl package this is more comfortable and
the settings get persisted:
driverctl -b ap set-override 17.0005 vfio_ap
and unset with
driverctl -b ap unset-override 17.0005
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For the in_use() check of an updated apmask the host's aqmask
was provided to the vfio function. Similar on an update of the
aqmask the host's apmask was provided to the vfio in_use()
function. This led to false results on the check for apmask or
aqmask updates. For example with only one APQN when exactly
this card is tried to be re-assigned back to the host, the
in_use() check did not complain.
The correct behavior is achieved with providing a full mask
for aqmask when an adapter is to be checked and similar a full
mask for aqmask when a domain is to be checked for usage.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With commit 1204777867 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens says:
====================
Remove s390 compat support to allow for code simplification and especially
reduced test effort. To the best of our knowledge there aren't any 31 bit
binaries out in the world anymore that would matter for newer kernels or
newer distributions.
Distributions do not provide compat packages since quite some time or even
have CONFIG_COMPAT disabled.
Instead of adding deprecation warnings to config option, or adding kernel
messages, just remove the code. Deprecation warnings haven't proven to be
useful. If it turns out there is still a reason to keep the compat support
this series can be reverted at any time in the future.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390 syscall.tbl format differs slightly from most others, and
therefore requires an s390 specific system call table generation
script.
With compat support gone use the opportunity to switch to generic
system call table generation. The abi for all 64 bit system calls is
now common, since there is no need to specify if system call entry
points are only for 64 bit anymore.
Furthermore create the system call table in C instead of assembler
code in order to get type checking for all system call functions
contained within the table.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With compat support gone there is only one system call table
left. Therefore remove the sys_call_table pointer from
thread_struct and use the sys_call_table directly.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since the kernel does not support running 31 bit / compat binaries
anymore, remove also the corresponding 31 bit support from uapi header
files.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There shouldn't be any 31 bit code around anymore that matters.
Remove the compat layer support required to run 31 bit code.
Reason for removal is code simplification and reduced test effort.
Note that this comes without any deprecation warnings added to config
options, or kernel messages, since most likely those would be ignored
anyway.
If it turns out there is still a reason to keep the compat layer this
can be reverted at any time in the future.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove s390 compat support from everything within tools, since s390 compat
support will be removed from the kernel.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Weißschuh <linux@weissschuh.net> # tools/nolibc selftests/nolibc
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> # selftests/vDSO
Acked-by: Alexei Starovoitov <ast@kernel.org> # bpf bits
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
All system call wrappers should match the sys_call_ptr_t type. This is not
the case for system calls without parameters. Add the missing pt_regs
parameter there too.
Note: this is currently not a problem, since the parameter is unused.
However it prevents to create a correctly typed system call table in
C. With the current assembler implementation this works because of
missing type checking.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kvm_s390_handle_lpsw() make use of the psw_compat_t type even though
the code has nothing to do with CONFIG_COMPAT, for which the type is
supposed to be used. Use psw32_t instead.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use a standard "_t" suffix for psw_t32 and rename it to psw32_t.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In case of a kernel crash caused by a protection exception, print the
unmodified PSW address as reported by the CPU. The protection exception
handler modifies the PSW address in order to keep fault handling easy,
however that leads to misleading call traces.
Therefore restore the original PSW address before printing it.
Before this change the output in case of a protection exception looks like
this:
Oops: 0004 ilc:2 [#1]SMP
Krnl PSW : 0704c00180000000 000003ffe0b40d78 (sysrq_handle_crash+0x28/0x40)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Krnl Code: 000003ffe0b40d66: e3e0f0980024 stg %r14,152(%r15)
000003ffe0b40d6c: c010fffffff2 larl %r1,000003ffe0b40d50
#000003ffe0b40d72: c0200046b6bc larl %r2,000003ffe1417aea
>000003ffe0b40d78: 92021000 mvi 0(%r1),2
000003ffe0b40d7c: c0e5ffae03d6 brasl %r14,000003ffe0101528
With this change it looks like this:
Oops: 0004 ilc:2 [#1]SMP
Krnl PSW : 0704c00180000000 000003ffe0b40dfc (sysrq_handle_crash+0x2c/0x40)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Krnl Code: 000003ffe0b40dec: c010fffffff2 larl %r1,000003ffe0b40dd0
000003ffe0b40df2: c0200046b67c larl %r2,000003ffe1417aea
*000003ffe0b40df8: 92021000 mvi 0(%r1),2
>000003ffe0b40dfc: c0e5ffae03b6 brasl %r14,000003ffe0101568
000003ffe0b40e02: 0707 bcr 0,%r7
Note that with this change the PSW address points to the instruction behind
the instruction which caused the exception like it is expected for
protection exceptions.
This also replaces the '#' marker in the disassembly with '*', which allows
to distinguish between new and old behavior.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With adjust_psw_addr() the uprobes code contains more or less a private
__forward_psw() implementation. Switch it to use __forward_psw(), and
remove adjust_psw_addr().
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Similar to __rewind_psw() add the counter part __forward_psw(). This
helps to make code more readable if a PSW address has to be forwarded,
since it is more natural to write
addr = __forward_psw(psw, ilen);
instead of
addr = __rewind_psw(psw, -ilen);
This renames also the ilc parameter of __rewind_psw() to ilen, since
the parameter reflects an instruction length, and not an instruction
length code. Also change the type of ilen from unsigned long to long
so it reflects that lengths can be negative or positive.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The PAI extension 1 control block area is 512 bytes in total.
It currently contains three address pointer which refer to counter
memory blocks followed by a reserved area.
Calculate the reserved area instead of hardcoding its size. This
makes the code more readable and maintainable.
No functional chance.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Jan Polensky <japo@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let dump_fault_info() print additional information to make debugging
easier:
Print "FSI" if the access-exception-fetch/store-indication facility is
installed. If it is installed the TEID may also indicate if an exception
happened because of a fetch or a store operation.
Print "SOP", "ESOP-1", or "ESOP-2" depending on the type of the installed
Suppression-on-Protection facility. This also gives additional information
about the validity and meaning of the TEID bits.
The output is changed from something like:
Failing address: 0000000000000000 TEID: 0000000000000803
to
Failing address: 0000000000000000 TEID: 0000000000000803 ESOP-2 FSI
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comments in do_protection() give the impression that a TEID, where bit
61 is zero, indicates a low address protection exception. This is not
necessarily true, and it depends on the type of Suppression-on-Protection
facility of the machine (see Princples of Operation) what this means.
Rework the comments and the die() message to reflect this. This may also
help to avoid confusion.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
flush_tlb() exists for historic reasons and was never used. Remove it.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Thomas Richter says:
====================
The PAI PMUs pai_crypto and pai_ext both operate on memory
mapped counters supported by z16 and follow on machines.
These memory mapped counters have a lot in common, like:
- validation, installing and removing events
- starting and stopping events
- retrieving counter values
- collecting sample data.
However both PMU drivers have slightly different parameters,
for example:
- different mapped memory size
- different number of supported counters
- different counter numbers and names
- different bits in the CR0 register
- different anchor address in lowcore
Due to these different parameters, two independent
PMUs have been developed. However both PMU drivers
have very much in common and most of the PMU call back
functions look very similar and are sometimes identical.
This patch set combines both independent PMU device drivers
perf_pai_crypto.c and per_pai_ext.c into one device driver.
The new device driver operations on a table which contains
the different parameters and uses common functions for
event operations.
Result is one PAI PMU driver which supports both PMUs.
It is also extendable to support new PAI PMUs.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename perf_pai_crypto.c to perf_pai.c. The new perf_pai.c
contains both PAI device drivers:
- pai_crypto for PAI crypto counter set
- pai_ext for PAI NNPA counter set
The rename reflects this common driver supporting both PMUs.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Combine PAI cryptography and PAI extension (NNPA) PMUs in one driver.
Remove file perf_pai_ext.c and registration of PMU "pai_ext"
from perf_pai_crypto.c.
Includes:
- Shared alloc/free and sched_task handling
- NNPA events with exclude_kernel enforced, exclude_user rejected
- Setup CR0 bits for both PMUs
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce PAI crypto specific event delete function to handle
additional actions to be done at event removal.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Prepare the common PAI PMU driver to handle multiple PMUs.
Convert pai_root into an array indexed by PAI_PMU_IDX(event)
so that per-CPU state becomes per-PMU. Adjust all call sites
accordingly. Rename KMSG_COMPONENT and the s390dbf buffer from
"pai_crypto" to "pai" for consistent naming.
No functional change intended beyond log identifiers.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename paicrypt_copy() to pai_copy() to indicate its common usage.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Add a common usable function pai_stop() for the event on a CPU.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Add a common usable function pai_stop() for the event on a CPU.
Call this common pai_stop() from paicrypt_del().
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Add a common usable function pai_add() for the event on a CPU.
Call this common pai_add() from paicrypt_add().
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Add a common usable function pai_start() to the event on a CPU.
The function expects a PAI PMU specific read function as second
parameter to read out the start value for an event.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Add a common usable function pai_read() to read counter values.
The function expects a PAI PMU specific read function as second
parameter.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Unify naming and logic for PAI PMU drivers to support both PMUs
pai_crypto and pai_ext.
Rename paicrypt_push_sample() to pai_push_sample() to reflect
its common usage. Add detailed comments about invocation context
and scheduler callbacks. Use struct pai_pmu to determine area_size
instead of PAGE_SIZE for counter backup.
Remove obsolete variable paicrypt_cnt.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename paicrypt_have_samples() to pai_have_samples() to reflect
its common usage. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename paicrypt_getctr() to pai_getctr() to reflect is common
purpose. pai_getctr() now uses pai_pmu table to extract PAI PMU
characteristics such as kernel_offset inside the counter area page.
Also rename paicrypt_have_sample() to pai_have_sample().
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename paicrypt_getdata() to pai_getdata(). Use the PAI PMU
characteristics in the pai_pmu table to determine the number
of counters to be extracted.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename functions
- paicrypt_free() -> pai_free()
- paicrypt_destroy_event() -> pai_destroy_event()
- paicrypt_destroy_event_cpu() -> pai_destroy_event_cpu()
to reflect their future common usage.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rework PAI crypto event initialization. Add a common
function for event initialization. It uses the PAI characteristics
stored in the pai_pmu table instead of hardcoded values.
Enlarge pai_event_valid() to check all event validation aspects.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Create and add a PMU characteristics table to store the parameters
of the PAI crypto PMU. This table contains PMU details such as
- number of available counters
- name of these counters to export to /sysfs
- Size of the memory mapped counter area
- base number of first counter
- etc
Also define a PMU specific initialization function to be called when
a PAI PMU feature is supported. At device driver initialization
test these features and if available use instruction qpaci to
retrieve the number of available counters. Also export these counter
names to /sysfs and register this PMU.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename functions paicrypt_root_alloc() and paicrypt_root_free()
to pai_root_alloc() and pai_root_free().
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename structure paicrypt_root to pai_root.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename structure paicrypt_map to pai_map.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To support one common PAI PMU device driver which handles
both PMUs pai_crypto and pai_ext, use a common naming scheme
for structures and variables suitable for both device drivers.
Rename structure paicrypt_mapptr to pai_mapptr.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename member page in struct paicrypt_map to area. This rename
creates consistent naming for both PMU drivers paicrypto and PMU
paiext. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The global variable cfm_dbg points to the s390dbf debug buffer.
Rename it to paidbg to better reflect its purpose.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
